INSPECTION & TESTING REQUIREMENTS REVISION: 12/16/2009 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: IR010800 1 of 3
SCOPE: PIPE: Beveled End, Seamless or Welded, Straight Seam, Stainless Steel Pipe
TEST AND INSPECTION PER: 01-SAMSS-046 and applicable ASTM standards
(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)
(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0010
0010
*** X
Pre-Fabrication/Production Requirements
Material Test Report
Specification Details / Notes:
Per ASTM A-999 (including micrographs)
0020 X Inspection and Test Plan (ITP) Verify Company approval of manufacturers Inspection and Test
Plan
0030 X Welding Procedure Specification (WPS) and Procedure Per Section 6 of 01-SAMSS-046 (verify Company approval of
Qualification Records (PQR) WPSs / PQRs for UNS N08904, S31254, S31803, and S32205
& S32750). Also see NACE MR-0103, Section 4.
0040 X X Raw Material Verification Per paragraph 8.2 and 8.3 of 01-SAMSS-046 and applicable
ASTM std.
0050 X Welder Qualification Records
0060 X NDT Personnel and Procedure Per paragraph 12 of 01-SAMSS-046 , Verify qualification per
ASNT CP-189 / EN 473 / ASNT SNT TC-1A
0020
0010
***
X
In process inspection & test requirement
Workmanship, Components, and Dimensions
Specification Details / Notes:
0020 X Compliance with P.O Description, Specifications, Suppliers
Catalog Description, Certified Drawings, and Paint Specification
0030 Chemical and Mechanical Tests:
0040 X X a),,Chemical Composition Per paragraph 8.2 and 8.3 of 01-SAMSS-046 and applicable
ASTM std. (dual certification, carbon content)
0050 X X b),,Tensile Tests Per applicable ASTM std.
0060 X X c),,Hardness Test Per paragraph 9 of 01-SAMSS-046
0070 X X d),,Flattening Test Per applicable ASTM std.
0080 X X e),,Guided Bend Test Per applicable ASTM std.
IR010800 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 12/16/2009 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: IR010800 2 of 3
(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)
(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0090 X X f),,Corrosion Test Per paragraph 10 of 01-SAMSS-046 (ASTM A-262 on a lot
basis)
0100 X X g),,Metallographic Examination Per paragraph 11 of 01-SAMSS-046 and applicable ASTM std.
(ferrite content / microstructure analysis)
0110 X X Heat Treatment Per paragraph 11 of 01-SAMSS-046 and applicable ASTM std.
(Liquid quenching required if ISO 15156 is stated in the PO)
0120 X Repair Welding Per paragraph 6.9 to 6.12 of 01-SAMSS-046
0130 X X Hydrostatic Testing Per paragraph 12.3 and 12.4 of 01-SAMSS-046
0140 X X Non Destructive Testing Per paragraph 12.3 and 12.4 of 01-SAMSS-046(non-destructive
electrical plus hydro per ASTM A-999)
0150 X X Pickling and Passivation Per paragraph 13 of 01-SAMSS-046 and applicable ASTM std.
0160 X X Positive Material Identification 01-SAMSS-046, Section 17 (5% per lot)
0030
0010
***
X
Final inspection & test requirements
Visual Inspection
Specification Details / Notes:
As per 01-SAMSS-046 and applicable ASTM std.
0020 X X Dimensions As per applicable ASTM std.
0030 X Weld Seam As per 01-SAMSS-046
0040 X Marking Per paragraph 16 of 01-SAMSS-046 and applicable ASTM std.
0050 X X PMI Per paragraph 16 of 01-SAMSS-046
0060 X Handling, Packing and Transportation Per paragraph 18 of 01-SAMSS-046
0070 X X Mill Test Certificate Per paragraph 19 of 01-SAMSS-046 and applicable ASTM std.
IR010800 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 12/16/2009 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: IR010800 3 of 3
(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)
(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
Notes:
(1) May only be waived by the responsible Saudi Aramco, ASC, or AOC Inspection Offices.
(2) See form IR000003 for instructions on using this form.
End of IR010800
