Scribd
Upload
68 views1 page

Multi Bay A Frame

STAAD.Pro can be used to generate wind and seismic loads on structures based on location and building codes to model the forces acting on them. It allows users to apply other loads like floor pressure, equipment weights, and wire tensions at specific points. STAAD.Pro can also perform dynamic analyses like modal analysis, response spectrum analysis, and time history analysis to understand a structure's response to vibrations or ground motions. The member grouping feature helps users identify which parts of a structure are most stressed so they can focus their redesign efforts.

Uploaded by

mesipa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
68 views1 page

Multi Bay A Frame

STAAD.Pro can be used to generate wind and seismic loads on structures based on location and building codes to model the forces acting on them. It allows users to apply other loads like floor pressure, equipment weights, and wire tensions at specific points. STAAD.Pro can also perform dynamic analyses like modal analysis, response spectrum analysis, and time history analysis to understand a structure's response to vibrations or ground motions. The member grouping feature helps users identify which parts of a structure are most stressed so they can focus their redesign efforts.

Uploaded by

mesipa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Figure3:STAAD.

ProStructuralAnalysisModelofanAFrameSubstationStructureDeflectionsandASCEDesignResults

[Link] can be used to generate ASCE7 wind loads on members using the automatic wind load
generatorfeature.IBC2006seismicloadsparametersbegeneratedautomaticallybysimplyentering
[Link]
loading on a deck. Wire tension loads, equipment loads etc. can be applied to the members in
[Link].

[Link] can also perform advanced dynamic analysis on the electric substation structures such as
modalcalculations([Link]),responsespectrum
analysisandtimehistoryanalysis/harmonicloadanalysis.

The member grouping feature in [Link] allowsusers to check which components of the electrical
substationstructurearefailingandredesignthembyeasily.

You might also like