MANTIS
COMPACT FLAW DETECTOR WITH TFM
LIGHTWEIGHT 16:64PR PORTABLE
PHASED-ARRAY FLAW DETECTOR
PAUT | sectorial, linear & compound scanning
Conventional UT | pulse-echo & dual techniques
TOFD | time of flight diffraction with lateral wave straightening
TFM | total focusing method in real-time for expertise
MANTIS
FULLY LOADED
Real-time TFM
Onboard PAUT calculator for all geometries
Compound scanning
Multi-group configurations
High PRF
Up to 3 encoded axes
ISO & ASTM code compliant
QUICK SETUP TIME
Intuitive interface, step by step app design
3-click TCG, TCG save and import
3-click material velocity
3-click probe balancing
3-click wedge calibration
Onboard library of probes, wedges & scanners
Onboard library of geometries and weld preps
Application oriented templates
ONBOARD ANALYSIS
800% amplitude dynamic
Cumulated volume views
TOFD lateral wave linearization
Customizable inspection report
Dedicated analysis tools
Fast Ethernet file transfer
PC data analysis with CAPTURE
@M2M_ndt m2m_ndt [Link]
MANTIS
MANTIS comes in 3 cost-effective packages: Adept, Expert and Master.
MASTER
Key features: Typical applications:
Hi-resolution TFM Thick pipes, austenitic welds,
Matrix limited probe access, 3D
and dual arrays (DLA, DMA) focusing
FMC recording R&D
+ EXPERT features + EXPERT Typical applications
EXPERT
Key features: Typical applications:
3-axis encoding Nozzle inspection
live 3D-overlays T-, K-, Y-Joints
20kHz PRF + ADEPT Typical applications
+ ADEPT features
ADEPT Key features:
PAUT + TOFD + PE + TFM
Weld prep overlay
CAD import
Multi-group
Quick TCG/DAC/AVG
Quick calibration wizards
Comes with CAPTURE for PC
CIVA and ENLIGHT compatible
Free data viewer
Fast Ethernet file transfer + USB 3.0
Unique flaw-detector with real-time TFM
Typical applications:
Composite, Thin pipes, Corrosion
Rope access inspections
M2M
1 rue de Terre-Neuve . Bt. H. Miniparc du Verger . 91940 Les Ulis . France | t. +33 (0)1 60 92 39 65 contact@[Link]
MANTIS
general
L x W x H: 320mm x 220mm x 100mm 8.4 high contrast resistive screen - resolution 1024x768 px
Operating temperature range: from -10C to 45C | 14F to 113F Weight: 4,4kg with battery
Storage temperature range: -10C to 60C | 14F to 140F with battery IP65 according to CEI60529
Operating time: 4h (hot swappable battery) Shock resistance according to MIL-STD-810G
standard phased-array
Linear scanning, sectorial scanning, compound Linear, matrix*, DLA and DMA* probes
Maximum active aperture: 16 channels Up to 6 probes | Up to 8 groups | Up to 2048 delay-laws
Phased array computation delay laws on plate, cylinder, T* & Y*, nozzle* CIVA fueled phased-array calculator
Focusing mode: true depth, sound path, projection
real-time TFM
Reconstruction channels: 16 up to 64* Max number of points of reconstructed image: up to 65k
Max refresh rate: up to 80fps Sound paths: direct (L or S), indirect* and converted* modes
pulsers
64 phased-array channels: UT-TOFD:
Negative square pulse, width: 35ns to 1250ns Negative square pulse, width: 30ns to 1250ns
Voltage: 12V 90V with 1V step Voltage: 12V to 200V with 1V step
Max. PRF: 12kHz up to 20kHz* Max. PRF: 12kHz up to 20kHz*
receivers
16 phased-array channels: UT-TOFD:
Input impedance: 50 Input impedance: 50
Frequency range: 0.4 to 20MHz Frequency range: 0.6 to 25MHz
Max. input signal: 2Vpp | TCG ACG DGS calibration wizard Max. input signal: 2Vpp
Gain: up to 120dB (0.1dB step) TCG DAC calibration wizard
Indicated values may change without notice. 2017 M2M. All rights reserved. Ref: PRO_MANTIS_SPEC_V1_EN
Cross-talk between two channels < 50 dB Gain: up to 120dB (0.1dB step)
digitizer
Digitizing and real-time summation on 16 channels Resolution: 16bits
FIR filters Max. sampling frequency: 100 MHz
Real-time averaging up to x32 Digitizing depth up to 16k points
Rectified, RF, envelope A-scan range or delay max 65k points
acquisition
Hardware acquisition gates Max. data flow 150 MB/s on a 128Gb SSD
A-Scan/Peak data recording Inspection data file size: up to 10Gb
FMC recording Data transfer through Ethernet
Acquisition trigger on time, event, encoder 800% amplitude range
wizards
CAD overlay and 3D view Scanner calibration
Real-time phased array calculator Amplitude calibration (TCG, DAC, DGS)
Base-time calibration for conventional UT Probe design | Weld geometry design
Wedge calibration (angle, height) Amplitude balancing
Velocity calibration Part geometry with parametric shapes: plate, cylinder, T* & Y*, nozzle*
analysis
Capture software with analysis and reporting tools Free viewer Amplitude range: 800%
A-Scan, B-Scan, C-Scan, D-Scan, Echodynamic, Top view, Side view, 3D view Overlay part geometry: plate, cylinder, T* or Y* section, nozzle*
Analysis gates Overlay weld geometry
Compatibility with CIVA analysis and ENLIGHT Customizable inspection report
I-O
Encoder inputs: 2 axes up to 3 axes* 2 LEMO 00 connectors for UT-TOFD (1 PR 1R)
1 IPEX connector for phased-array probe - can be upgraded to 2 with splitter* 1 external trigger
1 USB 2.0 + 1 USB 3.0 + 1 mini display port + 1 RJ45 Ethernet 7 TTL inputs/outputs
* Option
Standard: EN ISO 18563-1 for phased array channels
Standard: EN ISO 12668-1 for conventional channel
