--- ------------ ------------ ------------ ------------ ------------- ------------- ------------------ ------------- ---------------
Reinforced Concrete Restrained Two Way Slab Design to BS 8110
BY : Jurutera Perunding Tegap S/B 10/01/2018
--- ------------ ------------ ------------ ------------ ------------- ------------- ------------------ ------------- ---------------
Note : Rules in Clause [Link] BS 8110 Part 1 should applied
Project : Alex Ong's Bungalow @ Bukit Rimau, Shah Alam
Slab :
1 Slab geometry 1 Slab geometry
--- ------------ ------
Width of slab Lx = 5400 mm Ly/Lx = 1.11 (Two way slab)
Length of slab Ly = 6000 mm
Thickness of slab h = 150 mm
Top cover to bar c = 20 mm
Bot. cover to bar c = 20 mm
2 Slab loading
--- ------------ -----
Self weight = 3.60 kN/m2
Finishes = 1.00 kN/m2
Ceiling = 0.00 kN/m2
Partition = 0.00 kN/m2
Dead load Gk = 4.60 kN/m2
Live load Qk = 1.50 kN/m2 Ultimate load n = 8.84 kN/m2
3 Slab material
--- ------------ ------
Concrete characteristic strength = 25 N/mm2
Steel characteristic strength = 250 N/mm2
4 Slab edges continuity
--- ------------ ------------ ------------
(1 continuous ==> /////////)
(0 discontinuous ==> -------)
edge 3
Edge Continuity +--------------------------+
Edge 1 1 / Ly |
Edge 2 0 edge 1 / Lx | edge 2
Edge 3 0 / |
Edge 4 0 +--------------------------+
edge 4
5 Ultimate moment
--- ------------ ------------ -
Bx = moment coefficient for sagging moment in direction of Lx
By = moment coefficient for sagging moment in direction of Ly
B1 & B2 = moment coefficient for hogging moment over edge 1 & 2
B3 & B4 = moment coefficient for hogging moment over edge 3 & 4
Moment in x direction
------------ ------------ ------------
Bx = 0.066 Mx = 16.98 kNm/m width kNm/m width
B3 = 0.000 M3 = 0.00 kNm/m width
B4 = 0.000 M4 = 0.00 kNm/m width
Moment in y direction
------------ ------------ ------------
By = 0.044 My = 11.21 kNm/m width
B1 = 0.058 M1 = 14.95 kNm/m width
B2 = 0.000 M2 = 0.00 kNm/m width
|::
B.P Teoh
6 Round bar reinforcement
--- ------------ ------------ ------------ --
Reinforcement in x direction Ultimate moment (kNm/m width)
------------ ------------ ------------ ------------ %As Design Resist. Extra Status
Bottom bar : R10-100 #N/A 16.98 #N/A #N/A #N/A
Top bar edge 3 : R10-150 #N/A 0.00 #N/A #N/A #N/A
Top bar edge 4 : R10-125 #N/A 0.00 #N/A #N/A #N/A
Reinforcement in y direction Ultimate moment (kNm/m width)
------------ ------------ ------------ ------------ %As Design Resist. Extra Status
Bottom bar : R10-100 #N/A 11.21 #N/A #N/A #N/A
Top bar edge 1 : R10-100 #N/A 14.95 #N/A #N/A #N/A
Top bar edge 2 : R10-200 #N/A 0.00 #N/A #N/A #N/A
Maximum spacing (mm)
%As Max Actual %[Link] Status fbar
Distribution bar : R10-200 #N/A #N/A #N/A 0.24 #N/A #N/A
6 Ultimate shear
--- ------------ ------------
Shear in x direction Ultimate shear (kN/m width)
------------ ------------ ------ Design Resist. Extra Status
Edge 3 : 23.87 79.06 55.19 O.K
Edge 4 : 23.87 #N/A #N/A #N/A
7 Deflection
--- ------------ ---
Mx/bdx2 = #N/A
Asreq = #N/A mm2
Asprov = #N/A mm2
fs = #N/A N/mm2
Tension reinforcement modification factor = #N/A
Basic Lx/dx = 20
Allowable Lx/dx = #N/A
Actual Lx/dx = #N/A #N/A
|::
8 Summary
---- --------- ---------
R10-150 (T)
<----- ------------ -------- -------- ------>
^ +------------|----|------------------------------------+ ^
| / | ^ | |
| / | R10-100 (B) | | |
| /<----- ------+ ------------- ------------- |--->| |
| / | | | |
R10-100 | / | | | | R10-200
(T) | | (T)
| / | | | |
| / | R10-100 (B) | |
| ------- ------| ------------- ------------- +------- |
| / | v | |
v +------------|----|-------------------------------------+ v
<----- ------- ------- -------- ------>
R10-125 (T)
Slab Reference :
Width of slab Lx = 5400 mm
Length of slab Ly = 6000 mm
Slab thickness : 150 mm Note : (/////// continuous edge)
Distribution bar : R10-200 (---- discontinuous edge)
B.P Teoh
--- ------------ ------------ ------------ ------------- ------------ ------------- ---------------------- ------------- ---------------
Reinforced Concrete Restrained of Cantilever Slab Design to BS 8110
BY : Jurutera Perunding Tegap S/B 10/01/2018
--- ------------ ------------ ------------ ------------- ------------ ------------- ---------------------- ------------- ---------------
Note : Rules in Section 3.5, Part 1: BS 8110 : 1985 should applied
Project : Brookland 2 - RD 1
Slab : S7 (Family Area)
1 Slab geometry 1 Slab geometry
--- ------------ ------
Width of slab w = 1075 mm P1 P2
Length of slab L = 1079 mm
Thickness of slab h = 125 mm
Top cover to bar c = 25 mm a
Bot. cover to bar c = 25 mm b
2 Slab loading
--- ------------ ----- L
Self weight = 3.00 kN/m2
Finishes = 0.90 kN/m2
Ceiling = 0.00 kN/m2
Partition = 0.00 kN/m2
Dead load Gk = 3.90 kN/m2
Live load Qk = 2.00 kN/m2 Ultimate load n = 8.66 kN/m2
Point Load, P1 = 0.00 kN ; Distance from support, a = 0.00 mm
Point Load, P2 = 0.00 kN ; Distance from support, b = 0.00 mm
3 Slab material
--- ------------ ------
Concrete characteristic strength, fcu = 25 N/mm2
Steel characteristic strength, fy = 410 N/mm2
4 Ultimate Moment
--- ------------ -----------
Hogging Moment over support, M-ve = 4.689 kNm/m width
Effective depth, d = 95 mm
k ( M/fcubd2 ) = 0.0208 ( < 0.156 )
Lever arm, z = 90.25 mm
[Link] = 188 mm2/m
[Link] = 314 mm2/m
% [Link] = 0.251 %
Maximum Spacing = 285 mm
Actual Spacing = 250
Provide top bars at support = Y10-250
|::
5 Ultimate Shear
--- ------------ -----------
Shear Force at the support, V = 8.7 kN/m width
100As/bd = 0.331
Shear stress, v = 0.070 N/mm2
Shear resistance, vc = 0.626 N/mm2 (>v)
** The shear check is satisfactory ! **
|::
6 Deflection
--- ------------ -----------
Actual L/d ratio = 11.36
M/bd2 = 0.520
Basic L/d ratio = 7.00
B.P Teoh
Design Service Stress, fs = 152.94 N/mm2
Modification Factor, m = 2.00
Allowable L/d ratioAllowable L/d ratio = 14.00 > (L/d)actual
** The deflection check is satisfactory ! **
|::
6 Summary
--- ------------ ------------
B.P Teoh
