Scribd
Upload
242 views1 page

Rubber Product Specs for Engineers

This 3 sentence summary provides the high level information from the document: The document is a material data sheet from Zurich Industries L.L.C that lists 11 test specifications for a moulded and extruded rubber product including its maximum operating temperature, hardness, tensile strength, elongation at break, tear strength, compression set, abrasion loss, resilience, and specific gravity. The test results are obtained during normal test conditions and may vary between laboratories by up to 10%. The company disclaims responsibility for consequences arising from wrong usage of the material.

Uploaded by

Sajir Thiyam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
242 views1 page

Rubber Product Specs for Engineers

This 3 sentence summary provides the high level information from the document: The document is a material data sheet from Zurich Industries L.L.C that lists 11 test specifications for a moulded and extruded rubber product including its maximum operating temperature, hardness, tensile strength, elongation at break, tear strength, compression set, abrasion loss, resilience, and specific gravity. The test results are obtained during normal test conditions and may vary between laboratories by up to 10%. The company disclaims responsibility for consequences arising from wrong usage of the material.

Uploaded by

Sajir Thiyam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

ZURICH Industries L.L.

C
Mfg: Moulded & Extruded Rubber Products
P O Box: 17422, Ajman. U.A.E
Tel: +9716 7486828, Fax: +971 6 7486818 E – mail: zurichae@[Link]

MATERIAL DATA SHEET

Srl TEST
PHYSICAL
1. List the maximumPROPERTIES
Operating UNIT SPECIFICATION
No STANDARD
temperature.
[Link] the bearing strength.
1 Base Polymer Teflon

2 Hardness DIN 2240-91 Shore Ä 95

BS 903 Pt- psi 2250


3 100% Modules Mpa
A2ISO 37 (Mpa) (15.5)

BS 903 Pt- psi 4350


4 300% Modules Mpa
(Mpa)
A2ISO 37 (30.0)

BS 903 Pt- psi 6380


5 Tensile Strength Mpa
(Mpa)
A2ISO 37 (44.0)

BS 903 Pt-
6 Elongation at break Mpa 400
A2ISO 37

BS 903 Pt- 575


7 Tear Strength KN/m
A2ISO 34-1 (100.6)

BS903 Pt.
8 Compression Set % 31
A6 ISO 815

9 Abrasion Loss DIN 53516 mm 36

ASTM 2632-
10 Resilience % 44
92

11 Specific Gravity g/cm 1.12

The test results are obtained during normal test conditions, results may vary from one laboratory
to another by maximum of 10 %.
The information provided is believed to be accurate but the company disclaims any responsibility
for consequences arising from wrong usage of the material.

PDF created with pdfFactory trial version [Link]

You might also like