SN54/74LS137

3-LINE TO 8-LINE
DECODERS/DEMULTIPLEXERS
WITH ADDRESS LATCHES
3-LINE TO 8-LINE
DECODERS/ DEMULTIPLEXERS
WITH ADDRESS LATCHES

 
LOW POWER SCHOTTKY

       
       

      J SUFFIX
CERAMIC
  CASE 620-09
     16
1

     

      

   N SUFFIX
PLASTIC
16 CASE 648-08
1

D SUFFIX
SOIC
16
1 CASE 751B-03

ORDERING INFORMATION
SN54LSXXXJ Ceramic
SN74LSXXXN Plastic
SN74LSXXXD SOIC

GUARANTEED OPERATING RANGES

Symbol Parameter Min Typ Max Unit
VCC Supply Voltage 54 4.5 5.0 5.5 V
74 4.75 5.0 5.25
TA Operating Ambient Temperature Range 54 – 55 25 125 °C
74 0 25 70
IOH Output Current — High 54, 74 – 0.4 mA
IOL Output Current — Low 54 4.0 mA
74 8.0

FAST AND LS TTL DATA

5-225
 SN54/74LS137

FUNCTION TABLE
INPUTS
OUTPUTS
ENABLE SELECT
GL G1 G2 C B A Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7
X X H X X X H H H H H H H H
X L X X X X H H H H H H H H
L H L L L L L H H H H H H H
L H L L L H H L H H H H H H
L H L L H L H H L H H H H H
L H L L H H H H H L H H H H
L H L H L L H H H H L H H H
L H L H L H H H H H H L H H
L H L H H L H H H H H H L H
L H L H H H H H H H H H H L
Output corresponding to stored
H H L X X X
address, L; all others, H
H = high level, L = low level, X = irrelevant

(1) (15)
A Y0

(14)
Y1

(13)

(2) Y2
SELECT
B
INPUTS
(12)
Y3

DATA

(11) OUTPUTS
Y4
(3)
C

(10)
Y5

(9)
(4) Y6
GL

(7)
ENABLE
Y7
(5)
INPUTS
G2

(6)
G1

FAST AND LS TTL DATA

5-226
 SN54/74LS137

DC CHARACTERISTICS OVER OPERATING TEMPERATURE RANGE (unless otherwise specified)

Limits
Symbol Parameter Min Typ Max Unit Test Conditions
Guaranteed Input HIGH Voltage for
VIH Input HIGH Voltage 2.0 V
All Inputs
54 0.7 Guaranteed Input LOW Voltage for
VIL Input LOW Voltage V
74 0.8 All Inputs

VIK Input Clamp Diode Voltage – 0.65 – 1.5 V VCC = MIN, IIN = – 18 mA
54 2.5 3.5 V VCC = MIN, IOH = MAX, VIN = VIH
VOH Output HIGH Voltage
74 2.7 3.5 V or VIL per Truth Table

54, 74 0.25 0.4 V IOL = 4.0 mA VCC = VCC MIN,

VOL Output LOW Voltage VIN = VIL or VIH
74 0.35 0.5 V IOL = 8.0 mA per Truth Table

20 µA VCC = MAX, VIN = 2.7 V

IIH Input HIGH Current
0.1 mA VCC = MAX, VIN = 7.0 V
IIL Input LOW Current – 0.4 mA VCC = MAX, VIN = 0.4 V
IOS Short Circuit Current (Note 1) – 20 –100 mA VCC = MAX
ICC Power Supply Current 18 mA VCC = MAX
Note 1: Not more than one output should be shorted at a time, nor for more than 1 second.

AC CHARACTERISTICS (VCC = 5.0 V, TA = 25°C)

Levels of Limits
Symbol Parameter Delay Min Typ Max Unit Test Conditions
tPLH 2 11 17
Propagation Delay Time, A, B, C to Y ns
tPHL 4 25 38
tPLH 3 16 24
Propagation Delay Time, A, B, C to Y ns
tPHL 3 19 29
tPLH 2 13 21 VCC = 5.0 V
Propagation Delay Time, Enable G2 to Y ns
tPHL 2 16 27 CL = 15 pF
tPLH 3 14 21
Propagation Delay Time, Enable G1 to Y ns
tPHL 3 18 27
tPLH 3 18 27
Propagation Delay Time, Enable GL to Y ns
tPHL 4 25 38

AC SETUP REQUIREMENTS (TA = 25°C, VCC = 5.0 V)

Limits
Symbol Parameter Min Typ Max Unit Test Conditions
tW Pulse Width — Enable at GL 15 ns
ts Setup Time, A, B, C 10 ns VCC = 5.0 V
th Hold Time, A, B, C 10 ns

FAST AND LS TTL DATA

5-227
 Case 751B-03 D Suffix
"!
16-Pin Plastic  !  "   !

SO-16 &  

-A-  "  ! " 

 !     " # 

 " #!

 %#   " #!   

16 9  !

 ) ! !" $ !" 

)

-B- P      

      
1  
8        
   
 



   
R X 45°  
    

G C  
   

    

   !  !

-T-         
 J 
D   M F
    

K  °
 ( °
 ( °
 ( °
 (

       
    "  !  !
     

Case 648-08 N Suffix

"!
16-Pin Plastic  !  "   !

&  
-A-  "  ! 

 ! ' " "  ! $

   
16 9  ! ' ! " # 

!
B  #   ! "

1 8  ) " # ) !" $ !" 

)

      
F        
C L
    

S  
     

   
    
-T-   
 
  

   

  !  !

H K J M    !  !

   
  
G  

  

D        


 
 °  ° °  °
   " 
     

Case 620-09 J Suffix

-A- 16-Pin Ceramic Dual In-Line "!

 !  "   !

&  
16 9  "  ! 

 !  " "   $
-B-    

   &  $ "  

 $ 
1 8 "  " ! "   &

 ) " # ) !" $ !" 

C L )

      
       
    

  
   
-T-
 *  *  
   K
  
 
  

  !  !

   

E N M   !  !

 
   

F G J    *  *  

D     ! 
 !
    "  !
  °  °  °  °
    "  !  
   


FAST AND LS TTL DATA

5-228
 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.

Literature Distribution Centers:

USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036.
EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England.
JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan.
ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.

◊ FAST AND LS TTL DATA

5-229