Scribd
Upload
506 views2 pages

NF 200 Bench Top Centrifuge Overview

The NF 200 bench top centrifuge is ideal for separating blood and urine samples in laboratories. It has a programmable microprocessor control system and two digital displays for speed/RCF and time. The body, lid, and chamber are made of epoxy-polyester powder coated steel, making it resistant to external and internal effects. It ensures minimal temperature increase through continuous air flow and has a locking lid that prevents opening during use.

Uploaded by

Andres Pinilla Torres
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
506 views2 pages

NF 200 Bench Top Centrifuge Overview

The NF 200 bench top centrifuge is ideal for separating blood and urine samples in laboratories. It has a programmable microprocessor control system and two digital displays for speed/RCF and time. The body, lid, and chamber are made of epoxy-polyester powder coated steel, making it resistant to external and internal effects. It ensures minimal temperature increase through continuous air flow and has a locking lid that prevents opening during use.

Uploaded by

Andres Pinilla Torres
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

NF 200 BENCH TOP CENTRIFUGE

NF 200 bench top centrifuge is ideal for separation of blood


samples, urine particle sedimentation and other routine
applications in the laboratories.

The body, lid and chamber of NF 200 is


made of epoxy-polyester powder coated
steel which means that the centrifuge is
resistant to external and internal effects.

With programmable microprocessor control system,


the operations are accurate and reliable.
There are two digital displays
for speed/RCF and time.
The centrifugal force (RCF)
can also be programmed instead of
[Link] use of the control panel is
very easy and practical and there
are no knobs for manual adjustment.

NF 200 ensures mimimum increase of


sample temperature by means of the
continuous air flow system through the
air channels in the lid.

By means of the lid locking system,


the lid can not be opened while the
rotor is spinning and the program
can not be started if the lid is open.
The motor is protected
against overheating.

Quiet, direct drive and brushless induction


motor does not require any routine maintenance
throughout years of use.

There is a pulse key for short cenrifugation requirements.


The rotor spins as long as the key is pressed.

NF 200 is delivered with angle rotor made of polypropylene and


has capacity of 12x15 ml. There are also adaptors for
1.5/2, 5 and 7 ml tubes as well.
TECHNICAL SPECIFICATIONS
NF 200
Maximum Speed 5.000 rpm
Maximum RCF 2.822 xg
Maximum Capacity 12x15 ml
Control System Programmable Microprocessor Control System
Speed Set Range 1.000-5.000 rpm
Speed Set Step 10 rpm
Timer Set Range 1 - 99 min. and hold position
Timer Set Step 1 minute
Power Supply 230 V, 50/60 Hz
Net / Gross Weight, kg. 12 / 15
Overall Dimensions (WxDxH) mm 285x364x275
Packing Dimensions (WxDxH) mm 350x420x460

ROTOR
Rotor Type Capacity Max. Tube Dia. (mm) Radius (mm) Max. Speed Max. RCF
Angle 12 x 15 ml 17 101 5.000 rpm 2.822xg

ADAPTORS *
Catalogue No Tube Type [Link] Dia. (mm)
G 03 012 1.5/2 ml microtubes 11
G 03 014 7 ml vacuumed / non-vacuumed tubes 13
G 03 015 5 ml vacuumed / non-vacuumed tubes 13

* Should be ordered 12 pcs.

We reserve the right to modify the design and description

NÜVE SANAYİ MALZEMELERİ


İMALAT VE TİCARET A.Ş.
Esenbo¤a Yolu, 22 km.
Akyurt 06750 ANKARA TURKEY
(B)
[Link]

Tel : (90.312) 399 28 30 (pbx)


10.12/Z15. K 34 065

Fax : (90.312) 399 21 97


[Link]
sales@[Link]

ISO 9001:2008
ISO 13485:2003

You might also like