Self-aligning

ball bearings

Nomenclature
1220 _K M C3

2 4
1 3

1. Internal design: 3. Cage designs:

— Standard internal design TN9 Injection molded polyamide

6.6 cage with glass fiber
E Improved internal design reinforcement

M Machined brass cage

TN Injection molded polyamide

6.6 cage

2. Variations: 4. Clearance:

K Bearing with 1 to 12 C2 Radial internal clearance

tapered bore < Normal

2RS1 Contact seal acrylonitrile (C0)* Normal radial internal

butadine rubber (NBR) with clearance
sheet steel on both sides
of bearing C3 Radial internal clearance
> Normal
KAM Bearing kit, includes bearing
and adapter sleeve C4 Radial internal clearance
> C3

*Not marked on bearing or package

73
 Self-aligning ball bearings

Technical
Product features
Details

Boundary dimensions In accordance with ISO 15-1998

Tolerances ABEC 1, ISO 492-2002

Max. temperature 248° F (120° C) for open bearings only

Misalignment Series 108, 126, 127, 129, 135 3.0 degrees

Series 12 (E) 2.5 degrees
Series 13 (E) 3.0 degrees
Series 22 (E) 2.5 degrees
Series 22 E-2RS1 1.5 degrees
Series 23 (E) 3.0 degrees
Series 23 E-2RS1 1.5 degrees
Series 112 (E) 2.5 degrees
Series 130, 139 3.0 degrees

Cage material
Standard Polyamide (TN)
Glass fiber reinforced polyamide (TN9)
Optional Machined brass (M) large bearings

Axial load – max Fap = 3 x B x d where

for adapter B = bearing width in mm
sleeve d = bearing bore in mm
mounting Fap = axial load in Newtons

Seals 2RS1 synthetic rubber (NBR) seals

Grease Lithium soap with mineral oil

4FMGBMJHOJOH
4FMGBMJHOJOH

CBMM
CFBSJOH
PQFO
EFTJHO
CBMM
CFBSJOH
TFBMFE
EFTJHO

EBUB
UBCMFT
PO
QBHF

EBUB
UBCMFT
PO
QBHF


74
 Introduction

Introduction Variations
Self-aligning ball bearings have two rows
Product highlights
Sealed bearings
of balls with a common sphered raceway SKF self-aligning ball bearings are also avail-
in the outer ring. This feature gives the bear- able in a sealed (2RS1) version with rubbing
ings their self-aligning property, permitting Optimum performance
seals on both sides. The seals are made of oil SKF self-aligning ball bearings have
angular misalignment of the shaft relative to and acrylonitrile butadine rubber (NBR) and
the housing. Therefore, they are particularly been designed to provide optimum
have a sheet steel reinforcement. The operat- performance in a wide range of
suitable for applications where misalignment ing temperature range for the seal material is
can arise from errors in mounting or from machinery and equipment applications
-40° to +248° F (-40° to +120° C). The out-
shaft deflection. and are particularly suitable for appli-
side diameter of the seal is retained in a
For applications where the load carrying cations where misalignment can arise
recess in the outer ring giving a tight seal
capacity of self-aligning ball bearings is from errors in shaft and housing align-
without deformation, while the lip of the seal
insufficient, spherical roller bearings, which ment or shaft deflection and high
exerts a slight pressure against a recess in the
have the same self-aligning property, should speed is a requirement.
inner ring shoulder.
be used instead. The sealed bearings are supplied as stan-
SKF self-aligning ball bearings of the E dard filled with a lithium base grease which
Capacity for resistance-free,
design have higher load carrying capacity than is suitable for the operating temperature self-alignment
bearings of the original standard design range -22° to +230° F (-30° to +110° C). In the event of minor angular misalign-
because of improvements to the internal The bearings are lubricated for life and are ment, the problems which beset many
design. This makes them suitable for a wider maintenance free. They should not be other bearing types do not occur—
range of applications than their predecessors; heated at temperatures greater than 250° F allowing for increased operational life,
the same size of bearing can be used to carry (120° C) prior to mounting and must on no lower friction and temperature, less
heavier loads, or if the loads remain the same, account be washed. wear and noise during operation, and
operational reliability is enhanced and bearing SKF self-aligning ball bearings with seals reduced stress on both the cages and
life is longer. Self-aligning ball bearings of the are available with a cylindrical bore or with a lubricants.
E design are fitted with a glass fiber reinforced tapered bore, the taper being 1:12 as for the
polyamide 6.6 cage (TN9) as standard. basic bearings. Sealed bearings—greased for life
SKF self-aligning ball bearings are available SKF self-aligning ball bearings are
in several designs of which the most common available with contact seals on both
are shown in this catalog: sides which protect the bearing from
• Basic open (unsealed) design bearings Special solutions for contaminants during handling and
operation. This allows for longer bear-
• Bearings with seals on both sides
bearings with extended ing service life, is environmentally
friendly, and requires no relubrication—
inner ring making the bearing maintenance free.
Basic design Self-aligning ball bearings with extended
inner ring (series 11200) are used for Large product assortment
Self-aligning ball bearings of the basic design
applications employing commercial ground Available in a wide range (5 to 130 mm
are available with a cylindrical bore as well as
shafting. The special bore tolerance of inside bore diameter), the basic SKF
with a tapered bore (taper 1:12).
these bearings allows easy mounting and design is available with a choice of
For self-aligning ball bearings with a
dismounting. seals, cage materials, and extended
tapered bore, SKF supplies appropriate
Self-aligning ball bearings with extended inner rings.
adapter sleeves with which the bearings can
be secured simply and rapidly to smooth or inner ring are located axially by pins or
stepped shafts. The adapter sleeves are sup- shouldered screws which engage in a slot at Application flexibility
plied complete with nut and locking device. one side of the inner ring. The pins or Self-aligning bearings are used in high
Additional information can be found in the screws also prevent the inner ring from speed applications where alignments
Split Pillow Block sections (inch and metric) turning on the shaft. When these bearings may be a problem and running accuracy
under “Mounted Accessories”. are used in pairs, the slots of the inner rings is required. Examples include fans and
must either be adjacent or at the outboard blowers, textile equipment and general
positions. Otherwise, the shaft will be conveyor equipment.
located in one direction only.
Details on these special solution products
are available in other SKF publications,
which can be supplied upon request.

75
 Self-aligning ball bearings
Introduction

Special feature Clearance Mounting bearings with

Self-aligning ball bearings of series 14 as well
as some sizes of series 12 (K) and 13 (K) have Radial internal clearance tapered bore
balls which protrude somewhat from the bear- SKF self-aligning ball bearings are produced Bearings with a tapered bore are always
ing; the actual values are given in the adjacent with Normal radial internal clearance (CN or C0 mounted with an interference fit on the shaft,
table. This should be remembered when not marked on bearing) as standard. Radial adapter sleeve or withdrawal sleeve. As a
designing adjacent components. clearance selection is based on factors such as measure of the degree of interference of the fit,
high speed, operating temperature, shaft fits either the reduction in radial internal clearance
and axial movement limitations. Bearings with of the bearing or the axial displacement of the
a tapered bore are normally supplied with a C3 inner ring on the tapered bearing seating can
radial internal clearance (marked on the bear- be used.
ing). Bearings having clearances that are The mounting of self-aligning ball bearings
greater than (C3 or C4) or less than (C2) with tapered bore calls for experience and skill
Protrusion of balls from Normal are available on request. as they have a relatively small internal clearance,
bearing side faces The clearance values are given in Table 1. and a reliable measurement of the clearance
They are valid for unmounted bearings without reduction is not always possible. There are spe-
measuring load, and conform to ISO 5753- cific mounting instructions for these bearings in
1981 (ABMA standard 20). the SKF Bearing Installation and Maintenance
Guide (140-710) or by visiting the SKF website
C1
Loads [Link]/mount for exact mounting
instructions.
Equivalent dynamic bearing loads

P = Fr + Y1Fa where Fa / Fr ≤ e
Frequency vibration data
P = 0.65 Fr + Y2 Fa when Fa / Fr > e Frequency vibration data is available on the SKF
website [Link], in the Interactive
Values of factors e, Y1 and Y2 for each Engineering Catalog or by contacting SKF
individual bearing are given in the bearing Applications Engineering.
Table 2, page 78.

Minimum load
In order to provide satisfactory operation of
Bearing Protrusion all ball and roller bearings they must always
C1 be subjected to a given minimum load.
mm in This is also true of self-aligning ball bearings,
particularly if they run at high speeds where
1224(K) 1.3 0.0512 the inertia forces of the balls and cage, and the
1226 1.4 0.0551 friction in the lubricant can have a detrimental
influence on the rolling conditions in the bearing
1318(K) 1.0 0.0394
1319(K) 1.5 0.0591 and may cause damaging sliding movements to
1320(K) 2.5 0.0984 occur between the balls and the raceways.
1322(K) 2.6 0.1024 The requisite minimum radial load to be
applied in such cases can be determined by
using the Interactive Engineering catalog on the
SKF website [Link] or by contacting SKF
Applications Engineering. However, the weight
of the components supported by the bearing,
together with the external forces, often exceeds
the requisite minimum load. If this is not the
case, an additional radial load must be applied
to the bearing; for example, by increasing belt
tension or similar means.

76
 Introduction

Table 1

Radial internal clearance of self-aligning ball bearings

Bore Radial internal clearance

diameter
d C2 Normal C3 C4
over incl. min max min max min max min max min max min max min max min max
mm µm in µm in µm in µm in

Bearings with cylindrical bore

2.5 6 1 8 0.0000 0.0003 5 15 0.0002 0.0006 10 20 0.0004 0.0008 15 25 0.0006 0.0010

6 10 2 9 0.0001 0.0004 6 17 0.0002 0.0007 12 25 0.0005 0.0010 19 33 0.0007 0.0013
10 14 2 10 0.0001 0.0004 6 19 0.0002 0.0007 13 26 0.0005 0.0010 21 35 0.0008 0.0014

14 18 3 12 0.0001 0.0005 8 21 0.0003 0.0008 15 28 0.0006 0.0011 23 37 0.0009 0.0015

18 24 4 14 0.0002 0.0006 10 23 0.0004 0.0009 17 30 0.0007 0.0012 25 39 0.0010 0.0015
24 30 5 16 0.0002 0.0006 11 24 0.0004 0.0009 19 35 0.0007 0.0014 29 46 0.0011 0.0018

30 40 6 18 0.0002 0.0007 13 29 0.0005 0.0011 23 40 0.0009 0.0016 34 53 0.0013 0.0021

40 50 6 19 0.0002 0.0007 14 31 0.0006 0.0012 25 44 0.0010 0.0017 37 57 0.0015 0.0022
50 65 7 21 0.0003 0.0008 16 36 0.0006 0.0014 30 50 0.0012 0.0020 45 69 0.0018 0.0027

65 80 8 24 0.0003 0.0009 18 40 0.0007 0.0016 35 60 0.0014 0.0024 54 83 0.0021 0.0033

80 100 9 27 0.0004 0.0011 22 48 0.0009 0.0019 42 70 0.0017 0.0028 64 96 0.0025 0.0038
100 120 10 31 0.0004 0.0012 25 56 0.0010 0.0022 50 83 0.0020 0.0033 75 114 0.0030 0.0045

120 140 10 38 0.0004 0.0015 30 68 0.0012 0.0027 60 100 0.0024 0.0039 90 135 0.0035 0.0053

Bearings with tapered bore

18 24 7 17 0.0003 0.0007 13 26 0.0005 0.0010 20 33 0.0008 0.0013 28 42 0.0011 0.0017

24 30 9 20 0.0004 0.0008 15 28 0.0006 0.0011 23 39 0.0009 0.0015 33 50 0.0013 0.0020
30 40 12 24 0.0005 0.0009 19 35 0.0007 0.0014 29 46 0.0011 0.0018 40 59 0.0016 0.0023

40 50 14 27 0.0006 0.0011 22 39 0.0009 0.0015 33 52 0.0013 0.0020 45 65 0.0018 0.0026

50 65 18 32 0.0007 0.0013 27 47 0.0011 0.0019 41 61 0.0016 0.0024 56 80 0.0022 0.0031
65 80 23 39 0.0009 0.0015 35 57 0.0014 0.0022 50 75 0.0020 0.0030 69 98 0.0027 0.0039

80 100 29 47 0.0011 0.0019 42 68 0.0017 0.0027 62 90 0.0024 0.0035 84 116 0.0033 0.0046
100 120 35 56 0.0014 0.0022 50 81 0.0020 0.0032 75 108 0.0030 0.0043 100 139 0.0039 0.0055

77
 Self-aligning ball bearings

Table 2

Calculation factors for self-aligning ball bearings

Designation Calculation factors

Bearings with
cylindrical bore e Y1 Y2

126 0.33 1.9 3.0

127 0.33 1.9 3.0
129 0.33 1.9 3.0
1200 E 0.33 1.9 3.0
1201 E 0.33 1.9 3.0
1202 E 0.33 1.9 3.0
1203 E 0.31 2.0 3.1
1204 E 0.30 2.1 3.3
1205 E 0.28 2.2 3.5
1206 E 0.25 2.5 3.9
1207 E 0.23 2.7 4.2
1208 E 0.22 2.9 4.5
1209 E 0.21 3.0 4.6
1210 E 0.21 3.0 4.6
1211 E 0.19 3.3 5.1
1212 E 0.19 3.3 5.1
1213 E 0.18 3.5 5.4
1214 0.18 3.5 5.4
1215 0.17 3.7 5.7
1216 0.16 3.9 6.1
1217 0.17 3.7 5.7
1218 0.17 3.7 5.7
1219 0.17 3.7 5.7
1220 0.17 3.7 5.7
1221 0.17 3.7 5.7
1222 0.17 3.7 5.7
1224 0.19 3.3 5.1
1226 0.19 3.3 5.1

135 0.33 1.9 3.0

1301 E 0.35 1.8 2.8
1302 E 0.31 2.0 3.1
1303 E 0.30 2.1 3.3
1304 E 0.28 2.2 3.5
1305 E 0.28 2.2 3.5
1306 E 0.25 2.5 3.9
1307 E 0.25 2.5 3.9
1308 E 0.28 2.2 3.5
1309 E 0.23 2.7 4.2
1310 E 0.24 2.6 4.1
1311 E 0.23 2.7 4.2
1312 E 0.23 2.7 4.2
1313 E 0.22 2.9 4.5
1314 0.22 2.9 4.5
1315 K 0.22 2.9 4.5
1316 K 0.22 2.9 4.5
1317 K 0.22 2.9 4.5
1318 K 0.22 2.9 4.5
1319 K 0.23 2.7 4.2
1320 0.23 2.7 4.2
1322 0.22 2.9 4.5

78
 Table 2

Calculation factors for self-aligning ball bearings

Designation Calculation factors

Bearings with
cylindrical bore e Y1 Y2

1412 0.33 1.90 3.0

2200 E 0.54 1.15 1.8

2201 E 0.50 1.25 2.0
2202 E 0.43 1.50 2.3
2203 E 0.43 1.50 2.3
2204 E 0.40 1.60 2.4
2205 E 0.35 1.80 2.8
2206 E 0.33 1.90 3.0
2207 E 0.31 2.00 3.1
2208 E 0.22 2.90 4.5
2209 E 0.26 2.40 3.7
2210 E 0.23 2.70 4.2
2211 E 0.23 2.70 4.2
2212 E 0.24 2.60 4.1
2213 E 0.24 2.60 4.1
2214 0.27 2.30 3.6
2215 0.25 2.50 3.9
2216 E 0.22 2.90 4.5
2217 0.25 2.50 3.9
2218 0.27 2.30 3.6
2219 0.27 2.30 3.6
2220 0.27 2.30 3.6
2221 0.28 2.20 3.5
2222 0.28 2.20 3.5

2301 0.60 1.05 1.6

2302 0.52 1.20 1.9
2303 0.52 1.20 1.9
2304 0.52 1.20 1.9
2305 0.48 1.30 2.0
2306 0.44 1.40 2.2
2307 E 0.46 1.35 2.1
2308 E 0.23 2.70 4.2
2309 E 0.33 1.90 3.0
2310 0.43 1.50 2.3
2311 0.40 1.60 2.4
2312 0.33 1.90 3.0
2313 0.37 1.70 2.6
2314 0.37 1.70 2.6
2315 0.37 1.70 2.6
2316 0.37 1.70 2.6
2317 0.37 1.70 2.6
2318 0.37 1.70 2.6
2319 0.37 1.70 2.6
2320 0.37 1.70 2.6
2322 0.37 1.70 2.6

79
 Self-aligning ball bearings
Double row
B B
Open, cylindrical and tapered bore
Series: 126 — 1226 M
Size: 6 mm — 130 mm
0.2362 in — 5.1181 in

D d D d

Cylindrical Bore Tapered Bore

Cylindrical bore Tapered bore

Designation Principal dimensions Basic load ratings Speed rating Mass Designation Mass
Bore Outside diameter Width Dynamic Static
Reference Limiting Tapered Adapter
d D B C C0 speed speed bore sleeve
mm in mm in mm in N lbf N lbf r/min r/min kg lb kg lb

126 6 0.2362 19 0.7480 6 0.2362 2 510 560 480 110 70 000 45 000 0.01 0.10 — — — —
127 7 0.2756 22 0.8661 7 0.2756 2 650 600 560 130 63 000 40 000 0.01 0.10 — — — —
129 9 0.3543 26 1.0236 8 0.3150 3 900 880 820 180 60 000 38 000 0.02 0.10 — — — —

1200 E 10 0.3937 30 1.1811 9 0.3543 5 530 1 240 1 180 270 56 000 36 000 0.03 0.10 — — — —
1201 E 12 0.4724 32 1.2598 10 0.3937 6 240 1 400 1 430 320 50 000 32 000 0.04 0.10 — — — —
1202 E 15 0.5906 35 1.3780 11 0.4331 7 410 1 670 1 760 400 45 000 28 000 0.05 0.20 — — — —

1203 E 17 0.6693 40 1.5748 12 0.4724 8 840 1 990 2 200 490 38 000 24 000 0.07 0.20 — — — —
1204 E 20 0.7874 47 1.8504 14 0.5512 12 700 2 850 3 400 760 32 000 20 000 0.12 0.30 1204 EK H 204 0.04 0.08
1205 E 25 0.9843 52 2.0472 15 0.5906 14 300 3 210 4 000 900 28 000 18 000 0.14 0.40 1205 EK H 205 0.07 0.14

1206 E 30 1.1811 62 2.4409 16 0.6299 15 600 3 510 4 650 1 050 24 000 15 000 0.22 0.50 1206 EK H 206 0.09 0.19
1207 E 35 1.3780 72 2.8346 17 0.6693 19 000 4 270 6 000 1 350 20 000 13 000 0.32 0.80 1207 EK H 207 0.12 0.26
1208 E 40 1.5748 80 3.1496 18 0.7087 19 900 4 470 6 950 1 560 18 000 11 000 0.42 1.00 1208 EK H 208 0.16 0.35

1209 E 45 1.7717 85 3.3465 19 0.7480 22 900 5 150 7 800 1 750 17 000 11 000 0.47 1.10 1209 EK H 209 0.21 0.46
1210 E 50 1.9685 90 3.5433 20 0.7874 26 500 5 960 9 150 2 060 16 000 10 000 0.53 1.20 1210 EK H 210 0.24 0.53
1211 E 55 2.1654 100 3.9370 21 0.8268 27 600 6 200 10 600 2 380 14 000 9 000 0.71 1.60 1211 EK H 211 0.28 0.62

1212 E 60 2.3622 110 4.3307 22 0.8661 31 200 7 010 12 200 2 740 12 000 8 500 0.90 2.00 1212 EK H 212 0.31 0.68
1213 E 65 2.5591 120 4.7244 23 0.9055 35 100 7 890 14 000 3 150 11 000 7 000 1.15 2.60 1213 EK H 213 0.36 0.79
1214 70 2.7559 125 4.9213 24 0.9449 35 800 8 050 14 600 3 280 11 000 7 000 1.25 2.80 — — — —

1215 75 2.9528 130 5.1181 25 0.9843 39 000 8 770 15 600 3 510 10 000 6 700 1.35 3.00 1215 K H 215 0.66 1.45
1216 80 3.1496 140 5.5118 26 1.0236 39 700 8 920 17 000 3 820 9 500 6 000 1.65 3.70 1216 K H 216 0.81 1.80
1217 85 3.3465 150 5.9055 28 1.1024 48 800 10 970 20 800 4 680 9 000 5 600 2.05 4.60 1217 K H 217 0.94 2.05

1218 90 3.5433 160 6.2992 30 1.1811 57 200 12 860 23 600 5 310 8 500 5 300 2.50 5.60 1218 K H 218 1.10 2.45
1219 95 3.7402 170 6.6929 32 1.2598 63 700 14 320 27 000 6 070 8 000 5 000 3.10 6.90 1219 K H 219 1.25 2.75
1220 100 3.9370 180 7.0866 34 1.3386 68 900 15 490 30 000 6 740 7 500 4 800 3.70 8.20 1220 K H 220 1.40 3.10

1221 105 4.1339 190 7.4803 36 1.4173 74 100 16 660 32 500 7 310 7 000 4 500 4.35 9.60 1221 K H 221 1.60 3.55
1222 110 4.3307 200 7.8740 38 1.4961 88 400 19 870 39 000 8 770 6 700 4 300 5.15 11.40 1222 K H 222 1.80 3.95
1224 M 120 4.7244 215 8.4646 42 1.6535 119 000 26 750 53 000 11 910 6 300 4 000 6.75 14.90 1224 KM H 3024 1.80 3.95

1226 M 130 5.1181 230 9.0551 46 1.8110 127 000 28 550 58 500 13 150 5 600 3 600 8.30 18.30 — — — —

8BSOJOH
5IF
OFX
SFGFSFODF
BOE
MJNJUJOH
TQFFET
BSF
OPU UP
CF
VTFE BT
B
EJSFDU TVCTUJUVUJPO
GPS UIF
QSFWJPVT
PJM
BOE
HSFBTF
TQFFE
SBUJOHT
4FF
QBHF

GPS EFUBJMT

$POTVMU 4,' 64" *OD
QSJPS UP
EFTJHO
DIBOHF
PS PSEFS QMBDFNFOU

80
 Double row
B B
Open, cylindrical and tapered bore
Series: 135 — 1322 M
Size: 5 mm — 110 mm
0.1969 in — 4.3307 in

Series: 1412 M
D d D d
Size: 60 mm (2.3622 in)

Cylindrical Bore Tapered Bore

Cylindrical bore Tapered bore

Designation Principal dimensions Basic load ratings Speed rating Mass Designation Mass
Bore Outside diameter Width Dynamic Static
Reference Limiting Tapered Adapter
d D B C C0 speed speed bore sleeve
mm in mm in mm in N lbf N lbf r/min r/min kg lb kg lb

135 5 0.1969 19 0.7480 6 0.2362 2 510 560 480 110 63 000 45 000 0.01 0.10 — — — —
1301 E 12 0.4724 37 1.4567 12 0.4724 9 360 2 100 2 160 490 40 000 28 000 0.07 0.20 — — — —
1302 E 15 0.5906 42 1.6535 13 0.5118 10 800 2 430 2 600 580 34 000 24 000 0.09 0.20 — — — —

1303 E 17 0.6693 47 1.8504 14 0.5512 12 700 2 850 3 400 760 28 000 20 000 0.13 0.30 — — — —
1304 E 20 0.7874 52 2.0472 15 0.5906 14 300 3 210 4 000 900 26 000 18 000 0.16 0.40 1304 EK H 304 0.04 0.09
1305 E 25 0.9843 62 2.4409 17 0.6693 19 000 4 270 5 400 1 210 22 000 15 000 0.26 0.60 1305 EK H 305 0.07 0.16

1306 E 30 1.1811 72 2.8346 19 0.7480 22 500 5 060 6 800 1 530 19 000 13 000 0.39 0.90 1306 EK H 306 0.10 0.21
1307 E 35 1.3780 80 3.1496 21 0.8268 26 500 5 960 8 500 1 910 16 000 11 000 0.51 1.20 1307 EK H 307 0.14 0.31
1308 E 40 1.5748 90 3.5433 23 0.9055 33 800 7 600 11 200 2 520 14 000 9 500 0.72 1.60 1308 EK H 308 0.17 0.37

1309 E 45 1.7717 100 3.9370 25 0.9843 39 000 8 770 13 400 3 010 12 000 8 500 0.96 2.20 1309 EK H 309 0.23 0.51
1310 E 50 1.9685 110 4.3307 27 1.0630 43 600 9 800 14 000 3 150 12 000 8 000 1.20 2.70 1310 EK H 310 0.27 0.60
1311 E 55 2.1654 120 4.7244 29 1.1417 50 700 11 400 18 000 4 050 11 000 7 500 1.60 3.60 1311 EK H 311 0.32 0.71

1312 E 60 2.3622 130 5.1181 31 1.2205 58 500 13 150 22 000 4 950 9 000 6 300 1.95 4.30 1312 EK H 312 0.36 0.79
1313 E 65 2.5591 140 5.5118 33 1.2992 65 000 14 610 25 500 5 730 8 500 6 000 2.45 5.50 1313 EK H 313 0.42 0.93
1314 70 2.7559 150 5.9055 35 1.3780 74 100 16 660 27 500 6 180 8 500 6 000 3.00 6.60 -

1315 75 2.9528 160 6.2992 37 1.4567 79 300 17 830 30 000 6 740 8 000 5 600 3.55 7.80 1315 K H 315 0.78 1.70
1316 80 3.1496 170 6.6929 39 1.5354 88 400 19 870 33 500 7 530 7 500 5 300 4.20 9.30 1316 K H 316 0.95 2.10
1317 85 3.3465 180 7.0866 41 1.6142 97 500 21 920 38 000 8 540 7 000 4 800 5.00 11.00 1317 K H 317 1.10 2.45

1318 90 3.5433 190 7.4803 43 1.6929 117 000 26 300 44 000 9 890 6 700 4 500 5.80 12.80 1318 K H 318 1.30 2.85
1319 95 3.7402 200 7.8740 45 1.7717 133 000 29 900 51 000 11 460 6 300 4 300 6.70 14.80 1319 K H 319 1.40 3.10
1320 100 3.9370 215 8.4646 47 1.8504 143 000 32 150 57 000 12 810 6 000 4 000 8.30 18.30 1320 K H 320 1.60 3.55

1322 M 110 4.3307 240 9.4488 50 1.9685 163 000 36 640 72 000 16 190 5 300 3 600 12.00 26.50 1322 K H 322 2.05 4.50

1412 M 60 2.3622 150 5.9055 42 1.6535 125 000 28 100 41 500 9 330 9 000 6 300 3.95 8.70 — — — —

8BSOJOH
5IF
OFX
SFGFSFODF
BOE
MJNJUJOH
TQFFET
BSF
OPU UP
CF
VTFE BT
B
EJSFDU TVCTUJUVUJPO
GPS UIF
QSFWJPVT
PJM
BOE
HSFBTF
TQFFE
SBUJOHT
4FF
QBHF

GPS EFUBJMT

$POTVMU 4,' 64" *OD
QSJPS UP
EFTJHO
DIBOHF
PS PSEFS QMBDFNFOU

81
 Self-aligning ball bearings
Double row
B B
Cylindrical and tapered bore
Open and sealed
Series: 2200 E — 2222
Size: 10 mm — 110 mm
0.3937 in — 4.3307 in

D d D d

2RS1

Cylindrical Bore Tapered Bore

2RS1
Cylindrical bore Tapered bore 2RS1

Designation Principal dimensions Basic load ratings Speed rating Mass Designation Mass
Bore Outside diameter Width Dynamic Static
Reference Limiting Tapered Adapter
d D B C C0 speed speed bore sleeve
mm in mm in mm in N lbf N lbf r/min r/min kg lb kg lb

2200 E 10 0.3937 30 1.1811 14 0.5512 8 060 1 810 1 730 390 50 000 34 000 0.05 0.10 — — — —
2201 E 12 0.4724 32 1.2598 14 0.5512 8 520 1 920 1 900 430 45 000 30 000 0.05 0.10 — — — —
2202 E 15 0.5906 35 1.3780 14 0.5512 8 710 1 960 2 040 460 38 000 26 000 0.06 0.10 — — — —

2203 E 17 0.6693 40 1.5748 16 0.6299 10 600 2 380 2 550 570 34 000 24 000 0.09 0.20 — — — —
2204 E 20 0.7874 47 1.8504 18 0.7087 16 800 3 780 4 150 930 28 000 20 000 0.14 0.30 — — — —
2205 E 25 0.9843 52 2.0472 18 0.7087 16 800 3 780 4 400 990 26 000 18 000 0.16 0.40 2205 EK H 305 0.07 0.16

2206 E 30 1.1811 62 2.4409 20 0.7874 23 800 5 350 6 700 1 510 22 000 15 000 0.26 0.60 2206 EK H 306 0.10 0.21
2207 E 35 1.3780 72 2.8346 23 0.9055 30 700 6 900 8 800 1 980 18 000 12 000 0.40 0.90 2207 EK H 307 0.14 0.31
2208 E 40 1.5748 80 3.1496 23 0.9055 31 900 7 170 10 000 2 250 16 000 11 000 0.51 1.10 2208 EK H 308 0.17 0.37

2209 E 45 1.7717 85 3.3465 23 0.9055 32 500 7 310 10 600 2 380 15 000 10 000 0.55 1.20 2209 EK H 309 0.23 0.51
2210 E 50 1.9685 90 3.5433 23 0.9055 33 800 7 600 11 200 2 520 14 000 9 500 0.60 1.30 2210 EK H 310 0.27 0.6
2211 E 55 2.1654 100 3.9370 25 0.9843 39 000 8 770 13 400 3 010 12 000 8 500 0.81 1.80 2211 EK H 311 0.32 0.71

2212 E 60 2.3622 110 4.3307 28 1.1024 48 800 10 970 17 000 3 820 11 000 8 000 1.10 2.45 2212 EK H 312 0.36 0.79
2213 E 65 2.5591 120 4.7244 31 1.2205 57 200 12 860 20 000 4 500 10 000 7 000 1.45 3.20 2213 EK H 313 0.42 0.93
2214 70 2.7559 125 4.9213 31 1.2205 44 200 9 940 17 000 3 820 10 000 6 700 1.50 3.30 — — — —

2215 E 75 2.9528 130 5.1181 31 1.2205 58 500 13 150 22 000 4 950 9 000 6 300 1.60 3.55 2215 K H 315 0.78 1.7
2216 E 80 3.1496 140 5.5118 33 1.2992 65 000 14 610 25 500 5 730 8 500 6 000 2.00 4.40 2216 EK H 316 0.95 2.1
2217 85 3.3465 150 5.9055 36 1.4173 58 500 13 150 23 600 5 310 8 000 5 600 2.50 5.50 2217 K H 317 1.10 2.45

2218 90 3.5433 160 6.2992 40 1.5748 70 200 15 780 28 500 6 410 7 500 5 300 3.40 7.50 2218 K H 318 1.30 2.85
2219 M 95 3.7402 170 6.6929 43 1.6929 83 200 18 700 34 500 7 760 7 000 5 000 4.10 9.05 2219 KM H 319 1.40 3.1
2220 100 3.9370 180 7.0866 46 1.8110 97 500 21 920 40 500 9 100 6 700 4 800 5.00 11.00 2220 K H 320 1.60 3.55

2221 M 105 4.1339 190 7.4803 50 1.9685 108 000 24 280 45 000 10 120 6 300 4 500 6.10 13.50 2221 K H 321 1.85 4.1
2222 110 4.3307 200 7.8740 53 2.0866 124 000 27 880 52 000 11 690 6 000 4 300 7.10 15.50 2222 K H 322 2.05 4.5

8BSOJOH
5IF
OFX
SFGFSFODF
BOE
MJNJUJOH
TQFFET
BSF
OPU UP
CF
VTFE BT
B
EJSFDU TVCTUJUVUJPO
GPS UIF
QSFWJPVT
PJM
BOE
HSFBTF
TQFFE
SBUJOHT
4FF
QBHF

GPS EFUBJMT

$POTVMU 4,' 64" *OD
QSJPS UP
EFTJHO
DIBOHF
PS PSEFS QMBDFNFOU

82
 B B
Double row
Cylindrical and tapered bore
Open and sealed
Series: 2302 — 2320 M
Size: 15 mm — 100 mm
0.5906 in — 3.9370 in

D d D d

2RS1

Cylindrical Bore Tapered Bore

2RS1
Cylindrical bore Tapered bore 2RS1

Designation Principal Dimensions Basic load ratings Speed rating Mass Designation Mass
Bore Outside diameter Width Dynamic Static
Reference Limiting Tapered Adapter
d D B C C0 speed speed bore sleeve
mm in mm in mm in N lbf N lbf r/min r/min kg lb kg lb

2302 15 0.5906 42 1.6535 17 0.6693 11 900 2 680 2 900 650 32 000 24 000 0.11 0.20 — — — —
2303 17 0.6693 47 1.8504 19 0.7480 14 600 3 280 3 550 800 30 000 22 000 0.16 0.40 — — — —
2304 20 0.7874 52 2.0472 21 0.8268 18 200 4 090 4 750 1 070 26 000 19 000 0.21 0.50 — — — —

2305 25 0.9843 62 2.4409 24 0.9449 24 200 5 440 6 550 1 470 22 000 16 000 0.34 0.70 2305 K H 2305 0.09 0.19
2306 30 1.1811 72 2.8346 27 1.0630 31 200 7 010 8 800 1 980 18 000 13 000 0.50 1.10 2306 K H 2306 0.11 0.24
2307 E 35 1.3780 80 3.1496 31 1.2205 39 700 8 920 11 200 2 520 16 000 12 000 0.68 1.50 2307 EK H 2307 0.16 0.35

2308 E 40 1.5748 90 3.5433 33 1.2992 54 000 12 140 16 000 3 600 14 000 10 000 0.93 2.10 2308 EK H 2308 0.22 0.49
2309 E 45 1.7717 100 3.9370 36 1.4173 63 700 14 320 19 300 4 340 13 000 9 000 1.25 2.80 2309 EK H 2309 0.27 0.6
2310 50 1.9685 110 4.3307 40 1.5748 63 700 14 320 20 000 4 500 14 000 9 500 1.65 3.60 2310 K H 2310 0.34 0.75

2311 55 2.1654 120 4.7244 43 1.6929 76 100 17 110 24 000 5 400 11 000 7 500 2.10 4.60 2311 K H 2311 0.39 0.86
2312 60 2.3622 130 5.1181 46 1.8110 87 100 19 580 28 500 6 410 9 500 7 000 2.60 5.70 2312 K H 2312 0.45 0.99
2313 65 2.5591 140 5.5118 48 1.8898 95 600 21 490 32 500 7 310 9 000 6 300 3.25 7.20 2313 K H 2313 0.52 1.15

2314 70 2.7559 150 5.9055 51 2.0079 111 000 24 950 37 500 8 430 8 000 6 000 3.90 8.60 — — — —
2315 75 2.9528 160 6.2992 55 2.1654 124 000 27 880 43 000 9 670 7 500 5 600 4.70 10.40 2315 K H 2315 1.10 2.45
2316 80 3.1496 170 6.6929 58 2.2835 135 000 30 350 49 000 11 020 7 000 5 300 6.10 13.40 2316 K H 2316 1.20 2.65

2317 85 3.3465 180 7.0866 60 2.3622 140 000 31 470 51 000 11 460 6 700 4 800 7.05 15.50 2317 K H 2317 1.35 3
2318 M 90 3.5433 190 7.4803 64 2.5197 153 000 34 390 57 000 12 810 6 300 4 500 8.45 18.60 2318 K H 2318 1.60 3.55
2319 M 95 3.7402 200 7.8740 67 2.6378 165 000 37 090 64 000 14 390 6 000 4 500 9.80 21.60 2319 K H 2319 1.80 3.95

2320 M 100 3.9370 215 8.4646 73 2.8740 190 000 42 710 80 000 17 980 5 600 4 000 12.50 27.60 2320 K H 2320 2.00 4.4

8BSOJOH
5IF
OFX
SFGFSFODF
BOE
MJNJUJOH
TQFFET
BSF
OPU UP
CF
VTFE BT
B
EJSFDU TVCTUJUVUJPO
GPS UIF
QSFWJPVT
PJM
BOE
HSFBTF
TQFFE
SBUJOHT
4FF
QBHF

GPS EFUBJMT

$POTVMU 4,' 64" *OD
QSJPS UP
EFTJHO
DIBOHF
PS PSEFS QMBDFNFOU

83
 Self-aligning ball bearings
Double row
B B
Cylindrical and tapered bore
Open and sealed
Series: 2200 E 2RS1KTN9 — 2208 E 2RS1KTN9
Size: 10 mm — 40 mm
0.3937 in — 1.5748 in

D d D d

2RS1

Cylindrical Bore Tapered Bore

2RS1
Cylindrical bore Tapered bore 2RS1

Designation Principal dimensions Basic load ratings Speed rating Mass Designation Mass
Bore Outside diameter Width Dynamic Static Sealed
Reference Limiting Tapered Adapter
d D B C C0 speed speed bore sleeve
mm in mm in mm in N lbf N lbf r/min r/min kg lb kg lb

2200 E-
2RS1TN9 10 0.3937 30 1.1811 14 0.5512 5 530 1 240 1 180 270 — 17 000 0.05 0.10 — — — —

2201 E-
2RS1TN9 12 0.4724 32 1.2598 14 0.5512 6 240 1 400 1 430 320 — 16 000 0.05 0.10 — — — —

2202 E-
2RS1TN9 15 0.5906 35 1.3780 14 0.5512 7 410 1 670 1 760 400 — 14 000 0.05 0.10 — — — —

2203 E-
2RS1TN9 17 0.6693 40 1.5748 16 0.6299 8 840 1 990 2 200 490 — 12 000 0.10 0.20 — — — —

2204 E-
2RS1TN9 20 0.7874 47 1.8504 18 0.7087 12 700 2 850 3 400 760 — 10 000 0.14 0.30 — — — —

2205 E- 2205 E-
2RS1KTN9 25 0.9843 52 2.0472 18 0.7087 14 300 3 210 4 000 900 — 9 000 0.16 0.40 2RS1K H 305 C 0.07 0.20

2205 E-
2RS1TN9 25 0.9843 52 2.0472 18 0.7087 14 300 3 210 4 000 900 — 9 000 0.16 0.40 — — — —

2206 E- 2206 E-
2RS1KTN9 30 1.1811 62 2.4409 20 0.7874 15 600 3 510 4 650 1 050 — 7 500 0.26 0.60 2RS1K H 306 C 0.10 0.30

2206 E-
2RS1TN9 30 1.1811 62 2.4409 20 0.7874 15 600 3 510 4 650 1 050 — 7 500 0.26 0.60 — — — —

2207 E- 2207 E-
2RS1KTN9 35 1.3780 72 2.8346 23 0.9055 19 000 4 270 6 000 1 350 — 6 300 0.41 0.90 2RS1K H 307 C 0.14 0.40

2207 E-
2RS1TN9 35 1.3780 72 2.8346 23 0.9055 19 000 4 270 6 000 1 350 — 6 300 0.41 0.90 — — — —

2208 E- 2208 E-
2RS1KTN9 40 1.5748 80 3.1496 23 0.9055 19 900 4 470 6 950 1 560 — 5 600 0.50 1.10 2RS1K H 308 C 0.17 0.40

8BSOJOH
5IF
OFX
SFGFSFODF
BOE
MJNJUJOH
TQFFET
BSF
OPU UP
CF
VTFE BT
B
EJSFDU TVCTUJUVUJPO
GPS UIF
QSFWJPVT
PJM
BOE
HSFBTF
TQFFE
SBUJOHT
4FF
QBHF

GPS EFUBJMT

$POTVMU 4,' 64" *OD
QSJPS UP
EFTJHO
DIBOHF
PS PSEFS QMBDFNFOU

84
 Double row
B B
Cylindrical and tapered bore
Open and sealed
Series: 2308 E 2RS1TN9 — 2308 E 2RS1TN9
Size: 15 mm — 70 mm
0.5906 in — 2.7559 in

D d D d

2RS1

Cylindrical Bore Tapered Bore

2RS1
Cylindrical bore Tapered bore 2RS1

Designation Principal dimensions Basic load ratings Speed rating Mass Designation Mass
Bore Outside diameter Width Dynamic Static Sealed
Reference Limiting Tapered Adapter
d D B C C0 speed speed bore sleeve
mm in mm in mm in N lbf N lbf r/min r/min kg lb kg lb

2208 E-
2RS1TN9 40 1.5748 80 3.1496 23 0.9055 19 900 4 470 6 950 1 560 — 5 600 0.50 1.10 — — — —

2209 E- 2209 E-
2RS1KTN9 45 1.7717 85 3.3465 23 0.9055 22 900 5 150 7 800 1 750 — 5 300 0.53 1.20 2RS1K H 309 C 0.23 0.60

2209 E-
2RS1TN9 45 1.7717 85 3.3465 23 0.9055 22 900 5 150 7 800 1 750 — 5 300 0.53 1.20 — — — —

2210 E- 2210 E-
2RS1KTN9 50 1.9685 90 3.5433 23 0.9055 22 900 5 150 8 150 1 830 — 4 800 0.57 1.30 2RS1K H 310 C 0.27 0.60

2210 E-
2RS1TN9 50 1.9685 90 3.5433 23 0.9055 22 900 5 150 8 150 1 830 — 4 800 0.57 1.30 — — — —

2211 E- 2211 E-
2RS1KTN9 55 2.1654 100 3.9370 25 0.9843 27 600 6 200 10 600 2 380 — 4 300 0.79 1.70 2RS1K H 311 C 0.32 0.80

2211 E-
2RS1TN9 55 2.1654 100 3.9370 25 0.9843 27 600 6 200 10 600 2 380 — 4 300 0.79 1.70 — — — —

2212 E-
2RS1TN9 60 2.3622 110 4.3307 28 1.1024 31 200 7 010 12 200 2 740 — 3 800 1.05 2.30 — — — —

2213 E- 2213 E-
2RS1KTN9 65 2.5591 120 4.7244 31 1.2205 35 100 7 890 14 000 3 150 — 3 600 1.40 3.10 2RS1K H 313 C 0.42 1.00

2213 E-
2RS1TN9 65 2.5591 120 4.7244 31 1.2205 35 100 7 890 14 000 3 150 — 3 600 1.40 3.10 — — — —

2214 E-
2RS1TN9 70 2.7559 125 4.9213 31 1.2205 35 800 8 050 14 600 3 280 — 3 400 1.45 3.20 — — — —

2302 E-
2RS1TN9 15 0.5906 42 1.6535 17 0.6693 10 800 2 430 2 600 580 — 12 000 0.11 0.20 — — — —

8BSOJOH
5IF
OFX
SFGFSFODF
BOE
MJNJUJOH
TQFFET
BSF
OPU UP
CF
VTFE BT
B
EJSFDU TVCTUJUVUJPO
GPS UIF
QSFWJPVT
PJM
BOE
HSFBTF
TQFFE
SBUJOHT
4FF
QBHF

GPS EFUBJMT

$POTVMU 4,' 64" *OD
QSJPS UP
EFTJHO
DIBOHF
PS PSEFS QMBDFNFOU

85
 Self-aligning ball bearings
Double row
B B
Cylindrical and tapered bore
Open and sealed
Series: 2200 E — 2200 E 2RS1KTN9
Size: 17 mm — 50 mm
0.6693 in — 1.9685 in

D d D d

2RS1

Cylindrical
Cylindrical Bore Tapered Bore
2RS1
Tapered bore 2RS1
bore

Designation Principal dimensions Basic load ratings Speed rating Mass Designation Mass
Bore Outside diameter Width Dynamic Static Sealed
Reference Limiting Tapered Adapter
d D B C C0 speed speed bore sleeve
mm in mm in mm in N lbf N lbf r/min r/min kg lb kg lb

2303 E-
2RS1TN9 17 0.6693 47 1.8504 19 0.7480 12 700 2 850 3 400 760 — 11 000 0.16 0.40 — — — —

2304 E-
2RS1TN9 20 0.7874 52 2.0472 21 0.8268 14 300 3 210 4 000 900 — 9 000 0.21 0.50 — — — —

2305 E-
2RS1TN9 25 0.9843 62 2.4409 24 0.9449 19 000 4 270 5 400 1 210 — 7 500 0.34 0.70 — — — —

2306 E-
2RS1TN9 30 1.1811 72 2.8346 27 1.0630 22 500 5 060 6 800 1 530 — 6 700 0.51 1.10 — — — —

2307 E-
2RS1TN9 35 1.3780 80 3.1496 31 1.2205 26 500 5 960 8 500 1 910 — 5 600 0.70 1.50 — — — —

2308 E-
2RS1TN9 40 1.5748 90 3.5433 33 1.2992 33 800 7 600 11 200 2 520 — 5 600 0.96 2.10 — — — —

2309 E-
2RS1TN9 45 1.7717 100 3.9370 36 1.4173 39 000 8 770 13 400 3 010 — 4 500 1.30 2.90 — — — —

2310 E-
2RS1TN9 50 1.9685 110 4.3307 40 1.4173 43 600 9 800 14 000 3 150 — 4 000 1.65 3.60 — — — —

8BSOJOH
5IF
OFX
SFGFSFODF
BOE
MJNJUJOH
TQFFET
BSF
OPU UP
CF
VTFE BT
B
EJSFDU TVCTUJUVUJPO
GPS UIF
QSFWJPVT
PJM
BOE
HSFBTF
TQFFE
SBUJOHT
4FF
QBHF

GPS EFUBJMT

$POTVMU 4,' 64" *OD
QSJPS UP
EFTJHO
DIBOHF
PS PSEFS QMBDFNFOU

86