Scribd
Upload
104 views1 page

(Repairable) : Clean Steam Thermostatic Steam Trap

This document summarizes a thermostatic clean steam trap model FDA600. It is made of 316L stainless steel with tri-clamp, NPT, or tube weld connections. It is used to drain clean steam applications and CIP/SIP systems, operating by expanding and contracting a stainless steel thermal element in response to steam and condensate temperatures. Key features include all wetted parts being 316L stainless steel and self-draining operation when vertically mounted.

Uploaded by

Paulo Costa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
104 views1 page

(Repairable) : Clean Steam Thermostatic Steam Trap

This document summarizes a thermostatic clean steam trap model FDA600. It is made of 316L stainless steel with tri-clamp, NPT, or tube weld connections. It is used to drain clean steam applications and CIP/SIP systems, operating by expanding and contracting a stainless steel thermal element in response to steam and condensate temperatures. Key features include all wetted parts being 316L stainless steel and self-draining operation when vertically mounted.

Uploaded by

Paulo Costa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

STEAM TRAPS

Steam Traps FDA600


Clean Steam Thermostatic Steam Trap Thermostatic Clean Steam
(Repairable)

Model FDA600
Sizes 1/2”, 3/4”, 1”
Connections Tri-clamp, NPT, Tube Weld
Body Material Stainless Steel
PMO Max. Operating Pressure 110 PSIG
TMO Max. Operating Temperature Saturated Steam Temperature
PMA Max. Allowable Pressure 145 PSIG up to 338ºF
TMA Max. Allowable Temperature 350ºF @ 132 PSIG

Typical Applications
DRIP, PROCESS: FDA600 Series thermostatic clean steam FLOW
traps are used as drip traps on piping runs on clean steam
applications and for drainage for CIP/SIP systems and various 4.2
process vessels. Tube
NPT
How It Works 1/2” - 3.7 1.9
3/4” - 3.8 Sanitary
This trap contains a welded 316L stainless steel thermal 1” - 5.0
element that expands when heated and contracts when cooled.
When air and subcooled condensate are present, the trap is in
an open discharge position. When steam reaches the trap,
the element expands, closing the trap tightly.
Features
• All wetted parts are 316L stainless steel
• Operates close to saturation curve to minimize Units: Inches
2.4
condensate back-up
• Completely self-draining in the vertical downward flow
orientation Size/Connection Model PMO Weight
Inlet x Outlet Code PSI lbs
Sample Specification
The Steam Trap shall be all 316L stainless steel thermostatic 1/2” TC x TC FDA600-12-TCTC 110 1.25
type with a balanced pressure bellows that operates close to 3/4” TC x TC FDA600-13-TCTC 110 1.25
saturated steam temperatures. The unit shall have a split-body 1” TC x TC FDA600-14-TCTC 110 1.25
design for easy maintenance. Trap shall be completely 1/2” TC x NPT FDA600-12-TCNP 110 1.25
self-draining when mounted vertically.
3/4” TC x NPT FDA600-13-TCNP 110 1.25
Installation and Maintenance 1” TC x NPT FDA600-14-TCNP 110 1.25
Trap is designed to be installed in a vertical, downward 1/2” NPT x NPTT FDA600-12-NPNP 110 1.25
flow orientation to ensure that the self-draining clean steam 3/4” NPT x NPT FDA600-13-NPNP 110 1.25
requirement is satisfied. If purchased with tube weld connections
with the intention of welding in-line, the thermal element and 1” NPT x NPT FDA600-14-NPNP 110 1.25
gasket must be removed during the welding process or heat 1/2” TW X TW FDA600-12-TWTW 110 1.25
damage may occur.
C A PA C I T I E S – Condensate (lbs/hr)
M AT E R I A L S Condensate
Temp Below Differential Pressure (PSI)
Body Stainless Steel, AISI 316L Saturation 1 5 10 20 50 75 110
Thermal Element Stainless Steel, AISI 316L 10 ˚F 32 105 175 290 615 805 1160
O-Ring, FDA Grade Teflon Coated Silicone/FEP 20 ˚F 42 115 225 440 1060 1500 1850
Nuts & Bolts Stainless Steel, AISI 316L Cold Water 735 1070 1375 1900 3100 3500 4600

118 [Link] •• Pottstown PA • USA • Tel: 610-495-5131

You might also like