SEMESTER 3

12A301 COMPLEX VARIABLES AND TRANSFORMS

3204
COMPLEX VARIABLES: Complex differentiation: Analytic function ,Cauchy Riemann equations , harmonic functions. (8+5)

COMPLEX INTEGRATION: Cauchy’s integral theorem, Cauchy’s integral formula, Taylor and Maclaurin series, Laurent series
(concepts and statements only),singularities and zeros, residue integration method, residue integration of real integrals. conformal
mapping, geometry of analytic functions, linear fractional transformations ,conformal mapping of exponential, trigonometric,
hyperbolic functions. (14+10)

LAPLACE TRANSFORMS: Laplace transform, inverse transform, linearity, s-shifting , transforms of derivatives and integrals, unit
step function, t- shifting , dirac’s delta function , periodic functions , convolution , differentiation and integration of transforms,
method of solving differential equations and integral equations by using Laplace transform technique. (12+8)

FOURIER TRANSFORM: Fourier integral, Fourier transform , Fourier cosine and sine transforms. (6+4)

Discrete Fourier transform , Fast Fourier transform. (5+3)

Total L: 45 + T: 30 = 75
TEXT BOOKS:
1. Erwin Kreyszig, “Advanced Engineering Mathematics”,John Wiley and Sons, 2011.
2. C. Ray Wylie and Louis C Barret, “Advanced Engineering Mathematics”, Tata McGraw-Hill, Noida, 1995.

REFERENCES:
1. John H.Mathews and Russell W.Howell, Complex Analysis for Mathematics and Engineering, Jones and Bartlett House, 2011.
2. Riley K F, Hobson M P and Bence S J, “Mathematical Methods for Physics and Engineering”, Cambridge University, 1998.
3. Eugene. L. Grant and Richard .S. Leavenworth, Tata Mc Graw Hill , 2010.
4. Richard A. Johnson, “Miller & Freund’s Probability and Statistics for Engineers”, Prentice Hall, 2009.

12A302 STRENGTH OF MATERIALS

3 1 0 3.5
STRESSES AND STRAINS: Stress and strain due to axial force, elastic limit, Hooke's law-factor of safety - stepped bars, uniformly
varying sections, stresses in composite bar due to axial force. Strain energy due to axial force- proof resilience, stresses due to
gradual load, sudden load and impact load. (5+1)

CHANGES IN DIMENSIONS AND VOLUME: Lateral strain - Poisson's ratio, volumetric strain, changes in dimensions and volume,
shear stress, shear strain, relationship between elastic constants. Hoop and longitudinal stresses in thin cylindrical and spherical
shells under internal pressure-changes in dimensions and volume. (6+2)

BENDING MOMENT AND SHEAR FORCE: Relationship between load, shear force and bending moment - shear force and
bending moment diagrams for cantilever, simply supported and overhanging beams under concentrated loads, uniformly distributed
loads, uniformly varying loads, concentrated moments - maximum bending moment and point of contra flexure. (7+2)

FLEXURE IN BEAMS: Theory of simple bending and assumptions - flexure equation, section modulus, normal stresses due to
flexure. (5+2)

TORSION: Theory of torsion and assumptions - torsion equation, polar modulus, stresses in solid and hollow circular shafts, power
transmitted by a shaft - close coiled helical spring with axial load. (5+2)

PRINCIPAL STRESSES AND PLANES: (Two dimensional only) State of stress at a point - normal and tangential stresses on a
given plane, principal stresses and their planes, plane of maximum shear stress, analytical method - Mohr's circle method,
application to simple problems. (7+2)

DEFLECTION OF DETERMINATE BEAMS: Governing differential equation - Macaulay's method - moment area method,
application to simple problems (cantilever beams and simply supported beams only. (6+2)

COLUMNS AND STRUTS: Columns – behaviour of axially loaded short, medium and long column members – buckling load –
Euler’s theory – different end conditions – Rankine’s formula. (4+2)

Total L: 45 + T: 15 = 60
TEXTBOOKS:
1. Jindal U C, “Strength of Materials”, Asian Books Pvt Ltd, New Delhi, 2007.
2. Rajput.R K, “Strength of Materials”, S.Chand & Co Ltd, New Delhi, 1996.

35
REFERENCES:
1. Egor P Popov, “Engineering Mechanics of Solids”, Prentice Hall of India, New Delhi, 1997
2. Subramanian R, “Strength of Materials”, Oxford University Press, Oxford Higher Education Series, Oxford, 2007
3. Hibbeler R.C, “Mechanics of Materials”, Pearson Education, New Jersey, 2007
4. Bansal R.K, “Strength of Materials”, Lakshmi Publications(P)Ltd, New Delhi
5. Ferdinand P Been, Russell Johnson,J.R. and John J Dewole, “Mechanics of Materials”, Tata Mcgraw Hill Publishing Co Ltd,
New Delhi, 2006

12A303 MECHANICS OF MACHINERY

3 1 0 3.5
MECHANISMS: Terminology and definitions, degree of freedom, mobility. Grashoff’s law. Mechanical advantage. Transmission
angle. Description of common mechanisms, introduction to four bar spatial mechanisms. Kinematic inversions – Four bar chain,
slider crank chain, applications of mechanisms. (3+2)

KINEMATICS: Displacement, velocity and acceleration analysis in simple mechanisms, graphical method, velocity and acceleration
polygons. Kinematic analysis by algebraic method, vector approach, Chace equation, computer applications in the kinematics
analysis of simple mechanisms. (8+2)
FORCE ANALYSIS OF MECHANISM: Static force analysis- Free Body diagram, conditions of equilibrium, two, three and four force
members, effect of friction. Dynamic force analysis of slider crank mechanism. Study of effect of friction. (6+2)
GEARS: Spur gear terminology and definitions. Fundamental law of toothed gearing and tooth forms. Interchangeable gears, gear
tooth action-Interference and undercutting. Helical, bevel, worm, rack and pinion gears (basics only). Gear trains, epicyclic gear
trains, differentials, automotive transmission gear trains. (8+3)

BALANCING: Balancing of revolving, reciprocating masses in single plane and several planes-Primary and secondary forces and
couples, balancing of multicylinder inline engine. Balancing of V type of engines, direct and reverse crank technique. Balancing
machines – Field balancing, single and two planes. (8+2)

VIBRATION: Basic features of vibratory systems-Elements, degrees of freedom, single degree of freedom system. Undamped free
vibration, equation of motion, natural frequency. Damped free vibration, equation of motion, logarithmic decrement, critical speed of
shaft. Torsional vibration of two and three rotor systems, geared systems. (12+4)

Total L: 45 + T: 15 = 60
TEXT BOOKS:
1. John J. Uicker, Gordon R. Pennock & Late Joseph E. Shigley ,” Theory of Machines and Mechanisms", SI Edition, International
Version, 2009
2. Rattan S S, “Theory of Machines”, Tata McGraw -Hill Publishers, New Delhi, 2009.

REFERENCES:
1. Thomas Beven, “The Theory of Machines”, CBS Publishers and Distributors, New Delhi, 2005
2. Rao J.S and Dukkipati R.V, “Mechanism and Machine Theory”, New Age International Publishers, New Delhi, 2006
3. Sharma C.S, Kamlesh Purohit, “Theory of Mechanisms and Machines”, PHI, New Delhi, 2006
4. Sadhu Singh, “Theory of Machines”, Pearson Education, New Delhi, 2009
5. Gupta B.V.R , “Theory of Machines”, I.K International publishing house Pvt Ltd, New Delhi, 2011

12A304 MATERIALS ENGINEERING

3003
PHASE DIAGRAMS AND PHASE TRANSFORMATION: Phase diagram - binary isomorphous systems – Iron-Carbon phase
diagram, development of microstructures in iron-carbon alloys. Isothermal transformation diagrams and continuous cooling
transformation diagrams. (8)

STEELS AND CAST IRONS: Composition, structure and properties of steels - carbon steels, low alloy steels stainless steels, tool
steels. Composition, structure and properties of cast irons - grey iron, ductile iron, white iron and malleable iron, commercial grades
of materials. (7)

NON-FERROUS ALLOYS: Composition, structure and properties of non-ferrous alloys - copper and its alloys, aluminum and its
alloys, magnesium and its alloys, nickel and its alloys, titanium and its alloys and commercial grades of materials. (7)

STRENGTHENING OF METALS: Principle - Precipitation hardening, solution hardening, strengthening by grain refinement. Heat
treatment - Process annealing, stress relief annealing, full annealing, normalising, spheroidising, hardening, tempering,
austempering, martempering, surface hardening - carburising, cyaniding, flame hardening, induction hardening, nitriding.
Hardenability – concepts, assessment - the Jominy end quench test. (7)

MECHANICAL TESTING OF METALS: Hardness testing - Rockwell hardness test, Brinell hardness test, Knoop and Vickers
hardness tests. Impact testing-Charpy and Izod tests. Non-destructive tests – liquid penetrant test, magnetic particle test,
radiography test (both x-ray and gamma ray) and ultrasonic test. (10)
Total L: 45

36
TEXT BOOKS:
1. Donald R Askeland, “The Science and Engineering of materials”, Cengage Learning India, 2012.
2. William D Callister Jr, "Materials Science and Engineering an Introduction", John Wiley and Sons Inc. 2004.

REFERENCES:
1. William F Smith, "Foundations of Materials Science and Engineering", McGraw- Hill Publishing Co., 2009.
2. George E Dieter, “Mechanical Metallurgy”, McGraw-Hill Science Engineering Co, 1988.
3. John Brown, “Foseco Ferrous and Non Ferrous Foundryman’s Handbook” Butterworth-Heinemann, 2000.
4. American Society for Metals “ASM Handbook - Volume 1- 4, Volume 8 and Volume 17”. 1998.

12A305 THERMODYNAMICS
3 1 0 3.5
BASIC CONCEPTS: System and their behavior, properties of a system, state and equilibrium, process and cycles, pure substance
and property diagram for phase change process, zeroth law and first law of thermodynamics - Applications, energy and energy
transfer - Heat and work interactions, general energy equation and applications to thermal equipments - Turbines, compressors,
nozzle and diffuser. (9+3)

SECOND LAW OF THERMODYNAMICS: Statements - Heat engines, heat pump and refrigerator. Energy conversion efficiency,
reversible and irreversible process, Carnot cycle and theorem, entropy - Clausius inequality, change of phases of entropy, exergy.
(9+3)

GAS POWER CYCLES: Basic consideration in the analysis of power cycles, Otto, diesel and dual cycles and their performance,
Brayton cycle with regeneration, intercooling and reheating - Performance analysis. (9+3)

VAPOUR POWER AND REFRIGERATION CYCLES: Rankine cycle with reheating and regeneration, open and closed feed water
heating system - Performance analysis and comparison with Carnot cycle, cogeneration, refrigeration cycle. vapour-compression
and absorption system. (9+3)

THERMODYNAMIC RELATION: Equations of state, Maxwell relations, Clapeyron equation, Gibbs equation, Joule-Thomson effect,
general relation for real gases - internal energy, enthalpy, and entropy. P-V-T relation for gas mixture, generalized charts and
conventional tables for thermodynamic properties. (9+3)

Total L: 45 + T: 15 = 60
TEXT BOOKS:
1. Cengel Y.A and Boles M.A, "Thermodynamics – An Engineering Approach” Fourth edition, Tata McGraw Hill Publishin
Company, New Delhi, 2003.
2. Nag P.K, "Engineering Thermodynamics", Tata McGraw Hill Publishing Company, New Delhi, 2004.

REFERENCES:
1. Moran M.J and Shapiro, H.N, “ Fundamentals of Engineering Thermodynamics” - Fourth edition, John Wiley and Sons Private
Limited, New Delhi, 2000.
2. Holman J.P, "Thermodynamics", McGraw Hill Book Company, Fourth Edition, New York, 1988.
3. Stephen R Turns, “Thermodynamics - Concepts and applications”, Cambridge University Press, New York, 2006.
4. Richard E, Sonntag, Gordon J. Van Wylen, Claus Borgnakke, “Fundamentals of Thermodynamics”, John Wiley and Sons
Private Limited, New Delhi, 2002.
5. Richard E, Sonntag, Claus Borgnakke, “Introduction to Engineering Thermodynamics”, John Wiley and Sons Private Limited,
New Delhi, 2006.

12A306 ENVIRONMENTAL SCIENCES AND ENGINEERING

3003
STRUCTURE AND COMPOSITION OF ATMOSPHERE: Environment - Definition, scope and importance- composition of
atmosphere- classification of elements, chemical speciation. Particles, ions and radicals in the atmosphere. Thermochemical and
photochemical reactions in the atmosphere. (6)

NATURAL RESOURCES: Forest resources- use- overexploitation, Water resources- use - over-utilization, dams-benefits and
problems - land resources-land degradation. Energy resources - Fossil fuels-classification, composition, physico-chemical
characteristics and energy content of coal, petroleum and natural gas. Principles of generation of hydroelectric power, tidal, Ocean
Thermal Energy Conversion, wind, geothermal energy; solar collectors, photovoltaics, solar ponds, nuclear energy-fission and
fusion, bio-energy, energy from biomass and biogas, anaerobic digestion; energy use pattern in different parts of the world. (10)

ECOSYSTEM AND BIODIVERSITY: Structure and functions, components, energy flow, food chains, food web, Ecological pyramids
and types. Ecological Succession. Biodiversity-levels of biodiversity- values of biodiversity– India as a mega-diversity nation –
hotspots of biodiversity –threats to biodiversity– endangered and endemic species of India – conservation of biodiversity. (10)

37
ENVIRONMENTAL POLLUTION AND DISASTER MANAGEMENT: Definition – causes, effects and control measures of (a) Air
pollution (b) Water pollution (c) Soil pollution (d) Marine pollution (e) Noise pollution (f) Thermal pollution (g) Nuclear hazards.
Disaster management: floods, earthquake, cyclone and landslides. Solid waste management: causes, effects and control measures
of municipal solid wastes (hospital wastes, hazardous wastes and e-wastes) – role of an individual in prevention of pollution. (10)

SOCIAL ISSUES AND THE ENVIRONMENT: From unsustainable to sustainable development – water conservation, rain water
harvesting, and watershed management- role of nongovernmental organization. Population growth, variation among nations –
population explosion - environment and human health – role of information technology in environment and human health. Process of
EIA - ISO 14000 - Environment protection act – Air (Prevention and Control of Pollution) act – Water (Prevention and control of
Pollution) act–Wildlife protection act – Forest conservation act. (9)

TEXT BOOKS:
1. De, A.K., ‘Environmental Chemistry”, New Age Publications (Academic),India, 1989.
2. Gilbert M.Masters, ‘Introduction to Environmental Engineering and Science’, Pearson Education, 2004.
3. Benny Joseph, ‘Environmental Science and Engineering’, Tata McGraw-Hill, New Delhi, 2006.
4. Deswal, “An Introduction to Environmental Science”, Dhanpat Rai & Co Pvt. Ltd., 2011.

REFERENCES:
1. Clair Nathan Sawyer, Perry L. McCarty, Gene F. Parkin, ‘Chemistry for Environmental Engineering and Science” McGraw-Hill,
Science, 2002.
2. Koteswara Rao M.V.R, “Energy Resources: Conventional & Non-Conventional “ BSP Publications, 2006.
3. Cunningham W.P. Cooper, T.H. Gorhani, ‘Environmental Encyclopedia’, Jaico Publ., House, Mumbai, 2001.
4. Rajagopalan R, ‘Environmental Studies-From Crisis to Cure’, Oxford University Press, 2005.
5. Trivedi R.K, “Handbook of Environmental Laws, Rules, Guidelines, Compliances and Standards”, Vol. I and II, Enviro Media.

12A310 MANUFACTURING PRACTICE LABORATORY

0 0 3 1.5
LIST OF EXPERIMENTS - LATHE:
1. Facing and chamfering
2. Step turning.
3. Drilling and taper turning.
4. Grooving, and knurling.
5. Thread cutting – External and internal.

LIST OF EXPERIMENTS – SPECIAL MACHINES:

1. Internal and external dovetail machining in shaper.
2. Milling of spur gear.
3. Keyway slotting.
4. Pocket Milling.
5. Grinding.

Total P: 45
REFERENCES:
1. Laboratory manual prepared by Department of Mechanical Engineering, 2012.

12A311 VEHICLE COMPONENTS LABORATORY

1 0 3 2.5
Study of the following engines and its components by dismantling, comparing with recent engine components and assembling of
various parts:
1. Four stroke petrol engine.
2. Four stroke diesel engine.
3. MPFI engine.
4. CRDI engine.
5. Two stroke engine.
6. Study and measurement of car chassis and truck chassis.
7. Study, dismantling and assembly of front axle and rear axle.
8. Study, dismantling and assembly of clutch and brake system.
9. Study, dismantling and assembly of gearbox and transfer case.
10. Study, dismantling and assembly of steering system and differential unit.

Total L: 15 + P: 45 = 60
REFERENCES:
1. Laboratory manual prepared by Department of Automobile Engineering, 2012.

38
 SEMESTER 4

12A401 PROBABILITY AND STATISTICS

3 1 0 3.5
PROBABILITY: Introduction, sample space and events , interpretations of probability, addition rules , conditional probability,
multiplication and total probability rules , independence , Baye’s Theorem. (4+1)

RANDOM VARIABLES AND PROBABILITY DISTRIBUTIONS: Random Variables - Discrete random variables ,probability
distributions and probability mass functions ,cumulative distribution functions ,mean and variance , discrete distributions- Binomial,
Poisson and geometric distributions. (6+2)

CONTINUOUS RANDOM VARIABLES: Probability distributions and probability density functions, cumulative distribution functions,
mean and variance ,continuous distributions – Uniform, normal exponential and Weibull distributions. (6+2)

JOINT PROBABILITY DISTRIBUTIONS: Two Discrete random variables ,marginal and conditional probability distributions,
independence , two continuous random variables, marginal and conditional probability distributions , independence , covariance,
correlation, simple linear regression by least square method. (8+3)

STATISTICAL INFERENCE: Sampling distribution, law of large numbers, central limit theorem, estimation, point estimates, interval
estimates, determination of sample size, maximum likely hood estimation. (5+2)

TESTS OF HYPOTHESIS: Procedure in hypothesis testing , types of errors, p value, large and small sample tests , inference
concerning means, variances and proportions - Chi -Square test of independence. (8+3)

ANALYSIS OF VARIANCE: Introduction, assumptions of analysis of variance, completely randomized design, randomized block
design. (4+1)

QUALITY CONTROL: Control charts for measurements, control charts for attributes, tolerance limits. (4+1)

Total L: 45 +T: 15 = 60
TEXT BOOKS:
1. Douglas C. Montgomery and George C. Runger, “Applied Statistics and Probability for Engineers,” John Wiley & Sons, 2003.
2. Richard A. Johnson, “Miller & Freund’s Probability and Statistics for Engineers”, Prentice Hall, 2009.

REFERENCES:
1. Jay L. Devore, “Probability and Statistics for Engineering and the Sciences”, Cengage Learning, 2011.
2. Ronald E. Walpole, Raymond H. Myers, Sharon L. Myers and Keying Ye, “Probability & Statistics for Engineers & Scientists”,
Pearson Education, 2007.
3. Eugene. L. Grant, Richard .S. Leavenworth, Tata Mc Graw Hill, 2010

12A402 FLUID MECHANICS AND MACHINERY

3 1 0 3.5
FLUID PROPERTIES: Specific gravity and weight, viscosity, capillarity and surface tension, compressibility, vapour pressure and
gas laws, Conservation of laws - mass, momentum and energy, continuum hypothesis - Newton’s viscosity law-Newtonian Vs Non-
Newtonian Fluids. Types of flow and significance. (9+3)

FLUID STATICS: Pressure in fluids at rest-hydrostatic force on submerged surfaces, Buoyancy and stability, Stream function and
vortices, potential function, Couette flow, dimensional analysis, significant dimensionless groups, flow similarity and model studies.
(9+3)

FLUID DYNAMICS: Motion of a fluid particle – Fluid deformation – Differential analysis of fluid motion – Continuity and Navier
Stokes equation, Euler and Bernoulli's Equation and their applications, Introduction to computational fluid dynamics - necessity,
limitations and applications. (9+3)

FLOW THROUGH PIPES AND FLOW MEASUREMENT DEVICES: Boundary layer theory Hagen-Poiseuille and Darcy's
equations for friction and pressure drop, Helmholtz's Theorems, flow through pipes - Major and minor losses through pipes,
Measurement of discharge - Venturi and Orifice Meter, flow nozzle, pitot tubes. (9+3)

FLUID MACHINERY: Impulse and reaction turbine - Hydraulic efficiency, velocity components at the entry and exit of the rotor -
Velocity triangle for single stage radial flow and axial flow machines, specific speed. Centrifugal and reciprocating pumps - Working
and performance analysis. (9+3)

Total L: 45 + T: 15 = 60

39
TEXT BOOKS:
1. Yunus A Cengel and John M Cimballa, “Fluid Mechanics - Fundamentals and Application”, Tata McGraw Hill Publishing
Company, New Delhi, 2006.
2. Munson, Young, Okiishi and Huebsch, “Introduction to Fluid Mechanics”, John Willey and Sons, New Delhi, 2011.

REFERENCES:
1. Streeter Wylie and Bedford, "Fluid Mechanics", McGraw- Hill Publishing Company Limited, New York, 1998.
2. Irwing H Shames, "Mechanics of Fluids", Third Edition, McGraw Hill Inc., New York, 1992.
3. Kumar K L, “Engineering Fluid Mechanics”, Eurasia Publications Limited, New Delhi, 1990.
4. John D Anderson, “Computational Fluid Dynamics – The Basics with Applications”, McGraw Hill, New Delhi, 1995.
5. Bansal R.K., Fluid Mechanics and Hydraulics Machines, Laxmi Publications (P) Ltd., New Delhi, 2005.

08A403 AUTOMOTIVE ENGINES

3003
IC ENGINES: Classification and components of internal combustion engine, Principle and working of four stoke and two stroke SI
and CI engine .Cylinder head, cylinder block, crank case, sump, cooling passages, cylinder liners, piston types, piston rings, piston
pin connecting rod types, crank shafts, valves, valve seat inserts, valve actuating mechanisms, drive mechanisms. (9)

COMBUSTION AND COMBUSTION CHAMBERS: Petrol engines - Ignition limits, stages of combustion, effect of engine variables,
knocking and detonation - theory, parameters affecting combustion, combustion chamber - different types and design. Diesel
engines – Air/Fuel Ratio, stages of combustion, knocking and detonation - theory, parameters affecting combustion, combustion
chamber - different types. (9)

FUEL FEED SYSTEMS: Carburetor, types, Air/Fuel mixture proportions, cold start and idle, normal running, acceleration and
transfer circuits. Diesel fuel injection pump, types, construction and working. Governing systems, types of nozzles. Introduction to
electronic fuel injection system. (9)

COOLING AND LUBRICATION SYSTEMS: Necessity of cooling, air cooling, water cooling, thermosyphon and pump cooling,
radiator, pump, thermostat, antifreeze solution and radiator fan. Lubrication Systems – Mist, splash, forced, dry sump and wet
sump, oil filters and oil pumps. (7)

SUPERCHARGING AND TURBOCHARGING: Necessity of supercharging and turbo charging, mechanical supercharging and
turbo charging, compressors and turbines for supercharging, degree of supercharging, methods of supercharging, efficiency of
supercharged engine. (7)

ENGINE TESTING: Types of dynamometers, measurement of torque, thermal efficiency, measurement of heat and mechanical
losses. (4)

Total L: 45
TEXT BOOKS:
1. Ganesan V, “Internal Combustion Engines", Tata Mc-graw Hill Publishing Co. Ltd, 2012.
2. John B Heywood, “Internal Combustion Engine Fundamentals” McGraw Hill Book Co., USA, 1988.

REFERENCES:
1. Martyr A J and Plint M A, “Engine Testing Theory and Practice”, SAE International, Warrendale, 2007.
2. Mathur L and Sharma R P, “Internal Combustion Engines”, Dhanpat Rai Publications (P), Ltd, New Delhi, 2002.
3. Heinz Heisler, “Advanced Engine Technology”, SAE, 1995.
4. Richard Stone, “Introduction to IC Engines”, Macmilan, 1992.
5. Russell Carrigan and Richard R.Kent, “Automotive Technology (Engine Performance)”, Cengage Learning Yes Dee Publishing
Pvt.Ltd,2011.

12A404 AUTOMOTIVE EMISSION AND NVH CONTROL

3 1 0 3.5
EMISSIONS FROM SI AND CI ENGINES: Emission formation. Emission norms – Euro and Bharath. Causes for the increase in
emissions in engines, engine modifications, Effect of fuel properties and additives. Emissions from alternate fuels. (9+3)

EMISSION TESTING: Emission test cycles, constant volume sampling method, non dispersive infrared (NDIR) analyzer, flame
ionization detectors (FID), chemiluminescence analyzer, smoke meters, gas chromatograph. (9+3)

EMISSION CONTROL TECHNIQUES: Crank case emission control, fuel evaporation and control, exhaust gas recirculation (EGR),
intake temperature control, air injected exhaust, thermal reactors, catalytic converters – Types, air fuel ratio (A/F) control. Effect of
combustion and other engine parameters. (9+3)

40
NOISE AND NOISE CONTROL: Sound wave and its propagation, sound measurement-Reverberation time and absorption of
sound-Resonance and its ill effects-Sources of vehicle noise, engine noise, noise from cooling system, transmission noise, tyre, inlet
and exhaust noise, techniques for measuring-Noise measuring instruments, control of air borne noise and structure borne noise -
evaluation of natural frequencies of critical members, machine enclosures-Anechoi chamber. (9+3)

VIBRATION MEASUREMENT AND CONTROL: Measurement of vibration, FFT analyzer- Engine and drivetrain vibrations, vehicle
and chassis vibration-Methods of vibration control, damping, mounting, balancing of rigid and flexible rotors. Optimization of
vibration and vibration analysis. (9+3)

Total L: 45 + T: 15 = 60

TEXT BOOKS:
1. Pundir B P, “Engine Emissions: Pollutant Formation and Advances in Control Technology”, Narosa Publishing House Pvt. Ltd.,
Delhi, 2007.
2. Vehicle Refinement: Controlling Noise and Vibration in Road Vehicles, Matthew Harrison, Butterworth-Heinemann, Burlington,
2011

REFERENCES:
1. Martyr A J and Plint M A, “Engine Testing Theory and Practice”, SAE International, Warrendale, 2007.
2. Rao S S, "Mechanical Vibrations", Addison Wesley Longman, New Delhi, 2006.
3. Heinz Heisler, “Advanced Engine Technology”, SAE 2005.
4. George S. Springer, Donald J. Patterson, “Engine Emissions: Pollutant Formation and Measurement”, Plenum Press, 1973.
5. Barry Hollembeak,” Automotive Technology (Fuels and Emissions)”, Cengage Learning Yes Dee Publishing Pvt.Ltd,2011

12A405 ENGINEERING DESIGN

3 1 0 3.5
INTRODUCTION: Concepts of design, preferred numbers – basic and derived series – concurrent engineering – static stress
equation in axial, bending and torsional loading – criteria for failure – factor of safety. (2+0)

DESIGN AGAINST STATIC AND FLUCTUATING LOAD: Static loading - Combination of normal stresses - combination of normal
and shear stresses - principal stresses - theories of failure – maximum shear stress, maximum principal stress, maximum strain
energy, maximum distortion energy. Fluctuating load- Mechanism of fatigue failure , fatigue limit and fatigue strength, S-N curves,
Soderberg, Goodman and Gerber equations - stress raisers - stress concentration factor, notch sensitivity factor, factors affecting
fatigue limit, equivalent stress, combined variable stress. (12+5)

DESIGN OF SHAFTS COUPLINGS AND BEARINGS : Forces on shafts due to gears, belts and chains, estimation of shaft size
based on strength and critical speed. Couplings, types – flexible and rigid, design of key. Bearings – Static and dynamic load
capacity, cubic mean load, variable load, probability of survival, selection of bearings - (deep groove, angular contact ball bearings
and taper roller bearings). (11+4)

SPRINGS: Helical springs, stresses and deflection in round wires, concentric springs - accounting for variable stresses. Design of
leaf springs - stress and deflection equations. (6+2)

RIVETED / BOLTED AND WELDED JOINTS: Strength equations, efficiency, design of riveted joints. Thread forms, initial stress,
stresses due to external loads, elastic analysis of bolted joints for pressure vessel flanges. Welded joints - types, weld symbols,
strength of welds, centrally loaded, unsymmetrical sections, axially loaded and eccentrically loaded joints. (8+2)

SELECTION OF TRANSMISSION BELTS AND CHAINS: Transmission belts – V belts - narrow multiple V belts – timing belts – V
ribbed belts. Belts for given power and velocity ratio. Selection of roller chain for power and speed ratio. (6+2)

Total L: 45 + T: 15 = 60
TEXT BOOKS:
1. Bandari V B, "Design of Machine Elements ", Tata McGraw Hill, 2010.
2. Shigley and Mische, “Mechanical Engineering Design", McGraw Hill, 2010.

REFERENCES:
1. Faculty of Mechanical Engineering, PSG College of Technology, “Design Data Book", DPV Printers, Coimbatore, 2012.
2. Maitra G M, "Handbook of Gear design", Tata McGraw Hill, New Delhi, 2004.
3. Gope P. C, “Machine Design: Fundamentals and applications”, PHI learning, 2012.
4. Robert L Mott, "Machine elements in Mechanical Design", Macmillan Publishing Co, 2003

41
 12C070 ECONOMICS FOR ENGINEERS
2 1 0 2.5
INTRODUCTION: Definition – Nature – Scope and Significance of Economics for Engineers. (4+0)

DEMAND AND SUPPLY: Demand – Types – Determinants – Law of Demand – Elasticity of Demand – Types – Significance –
Supply – Market price determination – Case Study in Demand Forecasting –- Meaning – Methods – Consumer Survey – Trend
Projections – Moving average. (4+2)

COST AND REVENUE: Concepts – Classifications – Short run and long run cost curves – Revenue – Concepts – Measurement of
Profit.(Case Study). (4+2)

MARKET STRUCTURE: Perfect Competition – Characteristics – Price and output determination in short run and long run –
Monopoly – Price Discrimination – Monopolistic Competition – Product Differentiation – Oligopoly and Duopoly. (4+2)

MARKET FAILURE: Causes – Type of Goods – Rivalrous and Non-rivalrous goods – Excludable and Non-excludable goods –
Solutions – Government Intervention. (6+0)

MONEY AND BANKING: Money – Functions – Quantity theory of money – Banking – Commercial Banks – Functions – Central
Bank (RBI) – Functions – Case Study in Recent Development in Banking. (3+3)

FOREIGN EXCHANGE: Terms of Trade – Balance of Payments – Exchange rate determination – Methods of foreign payments –
International Institutions – IMF, IBRD. (3+3)

BUSINESS CYCLE AND NATIONAL INCOME: Meaning – Phases of business cycle - Inflation – Causes – Control measures –
Deflation - National Income – Concepts – Methods of calculating national income – Problems in calculating national income. (2+3)

Total L: 30 + T: 15 = 45
TEXT BOOKS:
1. Dewett. K.K, “Modern Economic Theory”, S. Chand and Company Ltd, New Delhi, 2010.
2. Lipsey & Chrystal, “Economics”, Oxford University Press, 2010

REFERENCES:
1. Paul A Samuelson & William, “Economics”, Tata McGraw Hill, New Delhi, 2010.
2. Thingan M.L “Money, Banking, International Trade and Public Finance”, Vrinda Publication, 2009.
3. Ahuja H.L, “Macro Economic Theory and Policy”, S.Chand and Co, New Delhi, 2010.
4. Francis Cherinullem “International Economics”, McGraw Hill Education, 2008.
5. Dutt and Sundaram “Indian Economy”, S.Chand and Co, New Delhi, 2011

12A410 MATERIALS ENGINEERING LABORATORY

0 0 3 1.5
STRENGTH OF MATERIALS
1. (a) Tension test on metals- stress strain characteristics, ductility, resilence, toughness.
(b) Cupping test on metal sheets-load deformation characteristics, cupping load, cupping number.
2. Hardness test on metals-Brinell, Vicker and Rockwell Hardness tests.
3. (a) Impact test on metals--Charpy, izod impact tests.
(b) Shear test on metals-direct shear strength, single shear, double shear.
(c) Compression test-compressive strength of concrete and brick.
4. (a) Tests on helical springs-compression and tension springs –load deformation characteristics, stiffness, shear stress,
modulus of rigidity, energy.
(b) Torsion test on beams-torque and angle of twist characteristics, shear stress, modulus of rigidity, energy.
5. (a) Tests on wood-tension, compression and bending-load deformation characteristics, Young’s modulus, modulus of rupture.
(b) Deflection test on beams-load deformation characteristics, Young’s modulus, Maxwell’s reciprocal law verification.

METALLURGY:
1. (a) Specimen preparation for metallographic inspection.
(b) Study of metallurgical microscope.
2. (a) Study of grey cast iron and SG iron in unetched condition.
(b) Study of grey and SG irons in the etched condition.
(c) Study of white cast iron and malleable cast iron.
3. (a) Study of low carbon and medium carbon steel.
(b) Study of high carbon steel.
4. (a) Study of quenched and tempered steel.
(b) Study of case carburized steel.
5. (a) Study of Aluminium alloys.
(b) Study of copper alloys.

42
 Total P: 45
REFERENCES:
1. Laboratory Manual prepared by Department of Civil Engineering, 2012.
2. Kehl G L, ‘Metallographic Laboratory Practice’, McGraw Hill, Newyork, 1994.

12A411 ENGINE TESTING AND TROUBLESHOOTING LABORATORY

0 0 3 1.5
1. Engine component measurements.
2. Carburetor trouble shooting and servicing.
3. Ignition system trouble shooting and servicing.
4. Compression and vacuum test on petrol engine.
5. Valve clearance adjustment.
6. Nozzle testing and servicing.
7. Battery testing.
8. Servicing of alternator and starting system trouble shooting.
9. Morse test.
10. Exhaust gas emission measurement on diesel and petrol engine.

Total P: 45
REFERENCE:
1. Laboratory Manual prepared by Department of Automobile Engineering, 2012.
2. Ken Pickerill,” Automotive Engineering (Engine Performance- Shop Manual)”, Cengage Learning Yes Dee Publishing
Pvt.Ltd,2010
3. Chistopher Hadfield,” Automotive Engineering (Engine Repair & Rebuilding - Classroom Manual)”, Cengage Learning Yes Dee
Publishing Pvt.Ltd,2010
4. Tim Gilles,” Maintenance of Automotive Engines”, Cengage Learning Yes Dee Publishing Pvt.Ltd,2009

12A412 FLUID MACHINERY LABORATORY

0 0 3 1.5
1. Flow measurement using mouthpiece and orifice.
2. Calibration and comparison of instruments for measuring flow through pipes-orifice, venturi meter, water meter and rotameter.
3. Calibration and comparison of open channel flow measuring instruments - V-notch and rectangular notch.
4. Experiment on force induced on the vane due to impact of jets.
5. Model study in wind tunnel.
6. Performance test on single stage, multi stage and variable speed centrifugal pumps.
7. Load test on impulse water turbine.
8. Load test on reaction water turbine and cross flow turbine.
9. Performance test on axial flow fan.
10. Performance test on centrifugal blower.

Total P: 45
REFERENCE:
1. Laboratory Manual prepared by Department of Mechanical Engineering, 2012

SEMESTER 5

12A501 HEAT AND MASS TRANSFER

3 1 0 3.5
BASIC CONCEPTS OF HEAT TRANSFER: Application areas of heat transfer, modes of heat transfer. (2+0)

CONDUCTION: one-dimensional and multi-dimensional heat conduction equations for various geometries, steady state heat
conduction with 1-D and 2-D, heat transfer from extended surfaces, transient heat conduction – Lumped system analysis, spatial
effects - exact solution, semi-infinite solid, numerical solution for steady state and transient heat conduction. (9+3)

43
CONVECTION: Classification of fluid flows, concepts of boundary layers - Velocity and thermal, external forced convection -
Similarity solution, flow over flat plates, flow across cylinders and spheres, internal forced convection - Laminar and turbulent flow in
tubes, convective correlations for circular and non-circular geometry, natural convection - Influence of vertical and horizontal
surfaces, parallel plate channels and enclosures. (11+3)

RADIATION: Radiation process and properties, emissive power and black body radiation, shape factor, radiation heat transfer:
between surfaces, two-surface enclosures, for back, diffuse and gray bodies, radiation shield. (7+3)

HEAT EXCHANGERS: Single and multi tube - Parallel, counter and cross flow heat exchangers, overall heat transfer coefficient,
effectiveness method (NTU) to study performance of heat exchangers, fouling factor, compact heat exchangers, heat pipes. (10+3)

MASS TRANSFER: Rate equations, mass diffusion in binary mixtures, evaporation in a column, convective mass transfer, heat and
mass transfer analogies. (6+3)

Total L: 45 + T: 15 = 60
TEXT BOOKS:
1. Yunus A Cengel, “Heat and Mass Transfer – A Practical Approach”, Tata McGraw Hill, New Delhi, 2007.
2. Frank P. Incropera, Theodore L. Bergman, Adrienne S. Lavine, David P. DeWitt, “Fundamentals of Heat and Mass Transfer”,
John Wiley and Sons, New Delhi, 2011.

REFERENCES:
1. Holman J P, "Heat Transfer", McGraw Hill Inc., New York, 2001.
2. Kothandaraman C P, "Fundamentals of Heat and Mass Transfer", New Age International Publishers, Chennai, 1997.
3. Nag P K., "Heat and Mass Transfer", Tata McGraw Hill Publishing Company, New Delhi, 2004.
4. John D Anderson, “Computational Fluid Dynamics – The Basics with Applications”, McGraw Hill, New Delhi, 1995.
5. Necati Özışık M, "Heat Transfer: A basic approach", McGraw Hill Inc., New York, 1985.

12A502 VEHICLE COMPONENT DESIGN I

3 1 0 3.5
INTRODUCTION: Design of engine based on vehicle characteristics, engine mounting and its types. (3+1)

PISTON AND CONNECTING ROD: Calculation of gas forces, variation of gas forces, design of piston, calculation of side thrust,
piston pin, piston rings. Materials. Connecting rod - Design principles, procedure, selection of cross section, materials. (10+4)

CRANKSHAFT AND FLYWHEEL: Design of crankshaft for two and four wheelers, determination of primary and secondary forces,
balancing of forces, calculation of rotating mass, location of mass, selection of materials. Design of flywheel -- Co-efficient of
speed fluctuation. Stresses in flywheel rims. Design of hubs and arms of flywheel, turning moment diagram. (11+4)

VALVE AND VALVE ACTUATING MECHANISM: Design of inlet and outlet valves, valve springs, tappet Cam design, cam profile
generation, cam shaft design, rocker and rocker shaft design considerations, materials. (8+4)

CLUTCH AND GEARS: Design of single and multi-plate clutches. Design of spur, helical, straight, spiral bevel gear and gear box
design. (13+2)

Total L: 45 + P: 15 = 60
TEXT BOOKS:
1. Khurmi R S,Gupta J K “A Text Book of Machine Design”, Eursia Publishing house, New Delhi, 2010.
2. Lichty, “IC Engines”, Kogakusha Co., Limited , Tokyo, 1986.

REFERENCES:
1. Thomas D Gillespie, “Fundamentals of Vehicle Dynamics”, SAE USA 1992.
2. Giles J G, “Engine Design”, Illiffee Books Ltd., London 1968.
3. John Fenton., “Gasoline Engine analysis for CAD’, MEP, London 1986.
4. Fred Scarfer & Richard Van Basshuysen, “Internal Combustion Engine” Handbook-Basic Components, Systems and
Perspectives”, SAE, 2004.
5. Heldt P.M, “High Speed Combustion Engines”, Oxford IBH Publishing Co., Calcutta, 1996.

12A503 AUTOMOTIVE ELECTRICAL AND ELECTRONICS SYSTEMS

3003
BATTERIES: Lead acid and alkaline batteries, construction and working, battery rating, battery charging methods, testing and
maintenance. (5)

IGNITION SYSTEM: Introduction - Construction and working of magneto coil and battery coil ignition systems, spark plug types,
spark advance mechanisms, electronic ignition systems - Transistorized ignition system, solid state ignition systems, capacitor
discharge ignition system and distributor less ignition system. (6)

44
STARTING SYSTEM: Principle, construction and working of starter motor, working of different starter drive units. (5)

CHARGING SYSTEM: Alternators – Principle, construction and working - Regulators. (5)

LIGHTING SYSTEM: Insulated and earth return system, details of head light and side light, LED lighting system, head light
dazzling and preventive methods. Horn, wiper system and trafficator. Fuses, cables, connectors and selection, multiplexing and de-
multiplexing. (5)

SENSORS AND ACTUATORS: Classification of sensors, sensor for speed, throttle position, exhaust oxygen level, manifold
pressure, crankshaft position, coolant temperature, exhaust temperature, air mass flow for engine application. Solenoids, stepper
motors and relay. (9)

ELECTRONIC ENGINE CONTROLS: Concept of an electronic engine control system, electronic fuel injection - Throttle body fuel
injection, multi point fuel injection, gasoline direct injection, common rail direct injection, electronic ignition control, engine mapping,
on-board diagnostics – L- Jetronic Fuel Injection Systems. (10)

Total L: 45

TEXT BOOKS:
1. William B. Ribbens, Norman P. Mansour,” Understanding of Automotive Electronics”, Butterworth-Heinemann, United Kingdom
2003.
2. Kholi P L, “Automotive Electrical Equipment”, Tata McGraw Hill Co., Ltd., New Delhi, 2001.

REFERENCES:
1. Joseph Bell, “Diesel Engineering: Electricity and Electronics”, Cengage Learning, New Delhi, 2007.
2. Robert Bosch, “Automotive Hand Book” SAE, 2000.
3. “Automotive Electrics Automotive Electronics”, Robert Bosch GmbH, 2004.
4. Tom Denton, “Automobile Electrical and Electronics systems”, Routledge Taylor & Francis Group London & New York, 2002.
5. Al Santini, “Automotive Technology”, Cengage Learning, Yes Dee Publishing Pvt. Ltd, 2011.

12A504 TWO AND THREE WHEELERS

3003
POWER UNIT: Two stroke SI engine, symmetrical and unsymmetrical port timing diagrams, scavenging - Types, processes,
efficiency and pumps. Rotary valve engine, fuel system, lubrication system, air and water cooling system, magneto coil and battery
coil spark ignition system, electronic ignition system, variable timing ignition system (VTI), starting systems-kick starter, electric
starting. (12)

CHASSIS AND SUB-SYSTEMS FOR TWO WHEELERS: Main frame, its types, shaft drive and chain drive, single, multiple and
centrifugal clutches, gear box and gear controls, front and rear suspension systems, shock absorbers. Panel meters and controls on
handle bar, Electrical systems. Drum brakes, disc brakes, front and rear brake links layouts, spokes wheel, cast wheel, disc wheel,
tyres and tubes and its types, alloy wheels. (12)

CHASSIS AND SUB-SYSTEMS FOR THREE WHEELERS: Main frame, its types, engine mountings, clutch, single, multiple
clutches, gear box and gear controls, front and rear suspension systems, shock absorbers. Panel meters and controls on handle
bar, Electrical systems. Drum brakes, disc brakes, front and rear brake links layouts, cast wheel, disc wheel, tyres and tubes and
its types, alloy wheels. (12)

SERVICE AND MAINTENANCE: Servicing and maintenance of two and three wheelers. (9)

Total L: 45

TEXT BOOKS:
1. Irving P.E, “Motor cycle engineering”, Temple Press Book, London, 1992.
2. Giri N.K, “Automobile Mechanics” Kanna Publishers, New Delhi, 2006.

REFERENCES:
1. “The cycle Motor Manual”, Temple Press Ltd, 1990.
2. “Encyclopedia of Motor Cycling 20 Volumes”, Marshall Cavensih, New York and London, 1989.
3. Raymond Board, Lambretta, “A Practical Guide to Maintenance and Repair”, 1987.
4. Ganesan V, “Internal Combustion Engines” Tata McGraw Hill, New Delhi, 2003.

45
 12A510 TWO AND THREE WHEELERS LABORATORY
0 0 3 1.5
1. Road performance test of a two wheeler using chassis dynamometer.
2. Performance test of a shock absorber.
3. Performance test on coil spring.
4. Two wheeler chain tension test and adjustment.
5. Servicing of clutch assembly for two and three wheeler.
6. Servicing of brake assembly for two and three wheeler.
7. Dismantling and assembling of two wheeler gear box and finding gear ratio.
8. Dismantling and assembling of three wheeler gear box and finding gear ratios.
9. Determination of turning circle radius of three wheelers.
10. Electrical system diagnostics.

Total P: 45
REFERENCE:
1. Laboratory Manual prepared by Department of Automobile Engineering, 2012

12A511 AUTOMOTIVE ELECTRONICS LABORATORY

0 0 3 1.5
1. Study of 8 bit microcontroller architecture.
2. Study of an integrated development environment.
3. 8 bit arithmetic and logic operations.
4. Code conversion and Waveform (square and rectangle) generation.
5. Display interface using microcontroller.
6. Keyboard interface using microcontroller.
7. Sensor interface using microcontroller.
8. Stepper motor interface using microncontroller.
9. DC motor interface using microcontroller.
10. Simulation of automotive lighting system.
Total P: 45

REFERENCE:
1. Laboratory Manual prepared by Department of Automobile Engineering, 2012.

12A512 VEHICLE PERFORMANCE CHARACTERISTICS

1 0 3 2.5
1. Determination of dynamic axle loads at 10 kmph and 20 kmph
2. Determination of maximum traction for different terrains.
3. Determination of axle loads of different gradation.
4. Determination of minimum TCD and maximum speed at minimum TCD.
5. Determination of drawbar pull.
6. Determination of µ value for different surfaces.

Total L: 15 + P: 45 = 60
REFERENCE:
1. Laboratory Manual prepared by Department of Automobile Engineering, 2012.

SEMESTER 6

12A601 VEHICLE DYNAMICS

3 1 0 3.5
INTRODUCTION: Earth and vehicle coordinate system. Longitudinal, lateral and vertical vehicle dynamics. Dynamic axle loads.
Road loads - Aerodynamic forces and moments, viscosity effects, separation and its control; aerodynamic lift and its control, ground
effect, styling for minimum drag. Rolling resistance, grade loads. (10+3)

PERFORMANCE MODE: Acceleration - Free body diagram of accelerating vehicle, maximum transferable tractive force, gradability,
Deceleration - free body diagram of decelerating vehicle, maximum decelerating rates, stopping distance, maximum braking force.
Vehicle performance. (10+4)

46
RIDE MODE: Degrees of freedom-single, two and multi degrees of freedom system, free, forced and damped vibration, model of an
automobile, magnification factor, transmissibility, vibration absorbers, pitch and bounce motion, oscillation centers, active and semi
active suspension, orthogonality of mode shapes, modal analysis. (7+2)

SPRINGING SYSTEM: Requirements, sprung mass and un-sprung mass, wheel hop, shimmy, wheel wobble, choice of suspension
spring rate, calculation of effective spring rate. Tyres - mechanics, stability of vehicle on slope, on curve and banked road. (6+2)

HANDLING MODE: Vehicle control-low speed cornering and static steering-Ackerman steering geometry, steady-state cornering -
steering factors, vehicle control parameters (under steer, neutral steer and over steer) , roll steer, compliance steer, ride steer, slip
angle steer, steady state handling-lateral acceleration gain, characteristic speed, yaw velocity gain, critical speed, effect of braking
on vehicle handling. (12+4)

Total L: 45 + P: 15 = 60
TEXT BOOKS:
1. Thomas D Gillespie, “Fundamentals of Vehicle Dynamics”, SAE USA 1992.
2. Rao S.S “Mechanical Vibrations”, Pearson Education Publication, 2009.

REFERENCES:
1. Giri N.K “Automobile Mechanics”, Khanna Publishers, New Delhi, 2006.
2. Cole D.E., “Elementary Vehicle Dynamics”, Ann Arbor, Michigan, USA, 1972.
3. Wong J.Y, “Theory of Ground Vehicles”, John Wiley & Sons, New York, 1978.

12A602 PRODUCTION PLANNING AND OPERATIONS RESEARCH

3 1 0 3.5
PRODUCTION PLANNING AND CONTROL: Industrial productivity – types, measurement; motion study, PMTS, therbligs, work
sampling, work measurement, rating systems, ergonomics. Plant location – decision analysis; plant layout – types, characteristics,
design techniques – systematic layout planning (SLP), computerized relative allocation of facilities technique (CRAFT); material
handling principles – Equipments; introduction to line balancing. (8)

Demand Forecasting: Functions – demand management – forecasting techniques, forecast errors – sources; scheduling – basics
– single machine scheduling; flow shop scheduling; job shop scheduling, heuristic procedures; priority dispatching rules. (4+3)

OPERATIONS RESEARCH: Origin, scope, areas of application; mathematical modeling and solving a problem; linear programming
– problem formulation, deriving the solution – graphical, simplex methods; duality theory. (8+3)

TRANSPORTATION MODEL: Formulation, solution – northwest corner, Vogel’s, stepping stone, MODI methods; degeneracy;
Assignment models – Hungarian algorithm; Sequencing models – processing ‘n’ jobs through two machines and three machines,
processing two job through ‘n’ machines. (12+3)

INVENTORY MODELS: Classification of fixed order quantity models, deterministic demand models - types, inventory models with
probabilistic demand, price breaks, quantity discount, safety stocks, selective inventory control techniques. (8+3)

QUEUING MODELS: Elements, operating characteristics; single channel queuing theory – models for arrival and service times;
models for multi channel queuing theory. (5+3)

Total L: 45 + T: 15 = 60
TEXT BOOKS:
1. Hamdy A Taha, “Operations Research: An Introduction”, Prentice Hall of India, New Delhi, 2002.
2. Gupta P K and Hira D S, “Operations Research”, S. Chand & Co., New Delhi, 2008.

REFERENCES:
1. Chase R B, Jacob F R and Aquilano NJ, “Operations Management for Competitive Advantage”, Tata McGraw Hill, New Delhi,
2004
2. Frederick S Hillier and Gerald J Liberman, “Introduction to Operations Research”, Tata McGraw Hill Publishing Company Ltd.,
New Delhi, 2006.
3. Jay Heizer and Barry Render, “Production and Operations Management”, 9th Edition, Prentice Hall, 2008.
4. Paneerselvam R, “Production and Operations Management”, Second Edition, Prentice Hall of India (P) Ltd., 2007.
5. Kanti Swarup, “Operations Research”, S. Chand & Sons, New Delhi, 2000.

47
 12A603 MANUFACTURE OF AUTOMOTIVE COMPONENTS
3 1 0 3.5
ENGINE COMPONENTS: Engine block – Casting – Conventional and expendable pattern. Cylinder head – Casting and machining.
Crank shaft, connecting rod – Forging, machining and heat treatment. Piston - Gravity, squeeze, die casting, machining and
finishing. Gudgeon Pin - Machining & Finishing Valve forging, friction welding, machining, heat treatment and surface improvement.
Cylinder Liners, Piston ring - Centrifugal, HPDC, LPDC, machining and finishing. (9+3)

TRANSMISSION COMPONENTS: Flywheel - Casting and Machining. Clutch - Friction plate, clutch housing, pressure plate –
conventional and fine blanking, composite friction lining and composite molding of phenol formaldehyde. Gearbox - Casting,
precision forging, powder metallurgy, orbital forming, heat treatment and finishing. Propeller shaft - Continuous casting, extrusion,
dies heat treatment and surface hardening. Axle - Forging, casting and machining. Leaf and coil spring - Forging and machining,
composite leaf spring and wrap forming of coil spring. (9+3)

BODY COMPONENTS: Body Panel - Thermoforming and hydro forming, press forming, welding – Resistance welding and other
welding processes. Instrument Panel - Principle of injection molding, injection molding of instrument panel. Bumpers - Molding of
bumpers, reinforced reaction injection molding, tooling and tooling. Manufacture of metal / polymer/metal panels. (9+3)

SURFACE COATINGS: Introduction, chemical vapour deposition, physical vapour deposition, cryogenic grinding of powders,
sealents, sound deadners, structural adhesives. (9+3)

MISCELLANEOUS: Tire and tube manufacturing, spray painting, powder coating, coach work. (9+3)

Total L: 45 + T: 15 = 60
TEXT BOOKS:
1. Heldt P M, “High Speed Combustion Engines”, Oxford IBH publishing Co., Calcutta, 1996.
2. Philip F Ostwald and Jairo Munuz, “Manufacturing Processes and Systems”, John Wiley & Sons, New York, 1998.

REFERENCES:
1. Kalpakjian, “Manufacturing Engineering and Technology”, Pearson Education, 2005.
2. Degarmo E P, “Materials and process in Manufacturing”, Macmillan Publishing Co, 1997.

12A604 VEHICLE COMPONENTS DESIGN II

3 1 0 3.5
INTRODUCTION: Different vehicle layouts with reference to power plant, location and drive. (5+1)

FRAME AND AXLES: Types of frames, various forces acting on frames, different sections, crash safety. Frame materials,
purpose of axle settings, wheel base and track. Front axle - functions, forces acting, cross sections. Rear axles – functions, forces
acting and design. (10+4)

STEERING SYSTEM, WHEELS AND TYRES: Functions, requirements, conditions for true rolling – Ackerman and Davis
mechanisms, roll centre and roll axis. Steering geometry – camber, castor, king pin inclination, toe-in, toe out, steering angle and
steering ratio. Steering linkages, steering kinematics. Steering gear boxes - Recirculating ball, worm and worm wheel, rack and
pinion. Tyre requirements, selection of tyres, wheels and mountings – lateral force and friction co-efficient, self aligning torque and
caster offset, overturning moment, torque steer effects. Tyre construction. (10+4)

SUSPENSION SYSTEM: Types of suspension, factors affecting ride quality, suspension springs. Shock absorbers, suspension
spring design, gyroscopic effects. Different suspension systems. (10+4)

BRAKING SYSTEM: Function, stopping time and distance, weight transfer during braking, brake actuating mechanisms –
mechanical, hydraulic and pneumatic, disc and drum brakes - design and analysis of brake shoes and friction pads. Brake shoe
materials and leading and trailing brakes. (10+2)
.
Total L: 45 + T: 15 = 60

TEXT BOOKS:
1. Heinz Heisler, “Advanced Vehicle Technology”, SAE International, 2002.
2. Hans B.Pacejka, “Tyre and Vehicle Dynamics” Butterworth-Heinemann, 2006.

REFERENCES:
1. Heldt.P.M, “Automotive Chassis”, Chilton Co, New York, 1992
2. Steeds. W, “Mechanics of Road Vehicles”, Illiffe Books Ltd, London, 1990
3. Giles.K.G, “Steering, Suspension and tyres”, Illiffe Books Ltd, London, 1988
4. Fred Scarfer & Richard Van Basshuysen, “Internal Combustion Engine” Handbook-Basic Components, Systems and
Perspectives”, SAE, 2004.
5. Hall, Allen S Holowenko, Alfred R Laughlin, Herman G, “Schaum’s Outline of Theory and Problems of Machine Design”, Tata
McGraw Hill Publishers, 2002.

48
 12A610 VEHICLE SERVICING AND TESTING LABORATORY
1 0 3 2.5
1. Inspection and servicing of different types of clutches.
2. Inspection and servicing of different types of gear boxes.
3. Measurement of backlash and run out of differential unit.
4. Servicing of transaxle assembly.
5. Servicing of different types of rear axle assembly.
6. Servicing of steering gear boxes and verification of Ackerman steering geometry.
7. Head light beam alignment, tuning of electric horn system and wind screen wiper system.
8. Brake system troubleshooting and servicing.
9. Electrical system diagnostics.
10. Wheel balancing and wheel alignment

Assignment: Study and layout of an automobile repair, service and maintenance shop. Also prepare different statements / records
required for repair and maintenance works. (Two wheeler / Three Wheeler / LMV / HMV).
Total L: 15 + P: 45 = 60
REFERENCES:
1. Service Manuals of reputed vehicles.
2. Anderson Ashburn, “ Automotive Trouble shooting and Maintenance ", McGraw-Hill Book Company , 1990.
3. A practical approach to Motor vehicle engineering and maintenance By Allan Bonnick & Derek Newbold. Elsevier Publications
2005.
4. Tom Denton, “Advanced Automotive Fault Diagnosis”, Elsevier Butterworth-Heinemann, 2011.
5. Don Knowles,”Automotive Technology (Service and Maintenance) “ Cengage Learning Yes Dee Publishing Pvt.Ltd,2011

12A611 INNOVATION LABORATORY

0 0 3 1.5
The mini-project involves the following:
1. Preparing a project brief proposal including
Problem identification.
A statement of system / process specification proposed to be developed (Block diagram / concept tree).
List of possible solutions including alternative and constraints.
Cost benefit analysis.
Time Line of activities.
2. A report highlighting the design finalization (based on functional requirements & standards (if any))
3. A presentation including the following:
Implementation Phase (Hardware / Software / both).
Testing & Validation of the developed system.
Learning in the Project.
4. Consolidated report preparation.

Total P: 45

12A620 INDUSTRIAL VISIT CUM LECTURE

0 0 3 1.5
1. Visit to local industries arranged by the department to study the industrial practices.
2. Lectures by industrial experts will be arranged to gain exposure to the trends in design, manufacturing and quality control
in industries.

Total P: 45

49
 SEMESTER 7

12A701 METROLOGY AND QUALITY ENGINEERING

3 1 0 3.5
GEOMETRICAL MEASUREMENT AND INSTRUMENTATION: Accuracy, precision, sensitivity, range, error calibration attribute
measurement, Taylor’s principle, GO, NOGO gauge design, dial indicator, slip gauges, sine bar, optical profile projector,
comparators - Straightness, flatness, parallelism and roundness. Surface finish - Direct and indirect methods, angularity, - Contact
and non-contact types image vision systems. (12+4)

CMM AND GEAR METROLOGY: CMM types, application- Gear inspection. Gear run out checking with concentricity tester,
composite errors, base pitch measurement. Profile errors, instrument for checking backlash, alignment errors, thread measurement.
(6+2)

PRESSURE, TEMPERATURE AND FLOW MEASUREMENT: Bourdon pressure gauge, bellow gauges, inductive type pressure
transducer, piezo electric pressure measurement system to obtain p-ϴ diagrams of IC engines, Mc Leod, Pirani gauge -Bimetallic
thermometer, thermisters, thermocouples, radiation pyrometer, rotometer, magnetic flow meter, turbine type flow meter, alcock
viscous flow air meter, hot wire anemometer, laser Doppler anemometer, particle image velocimeter. (9+3)

LOAD AND TORQUE MEASUREMENT: Weigh bridge, strain gauge, torque measurement, rope and brake drum, prony brakes,
hydraulic dynamometer, eddy current dynamometer, electric swing field dynamometer, chassis dynamometer, torsion meters. (6+2)

QUALITY, PROCESS CONTROL AND RELIABILITY: QS9000, VDA6.1, TS16949, quality function deployment, customer services.
Off-line and on-line quality control methods, loss functions. Quality tools, X, R, X, , p-chart, c-chart, np, u chart, normal distribution,
six sigma and process capability. Life tests, concept of reliability importance, reliability and failure, causes of failure, MTTB, MTTE,
MTTR. (12+4)
Total L: 45 + T: 15 = 60
TEXT BOOKS:
1. Douglas Montgomery, “Design and Analysis of Experiments” John Wiley and Sons Inc., USA, 2012.
2. Gupta I.C, “Text Book of Engineering Metrology”, Dhanapatharai Publishers, New Delhi, 2003.

REFERENCES:
1. Jain R.K, “Engineering Metrology”, Khanna Publishers, Delhi, 2009
2. Douglas Montgomery, “Introduction to Statistical Quality Control”, John Wiley and Sons Inc., USA, 2005.
3. Gerald M.S, “Statistical Process Control and Quality Improvement”, Pearson Education, USA, 2004.
4. Stephen B.V and Marcur J.J, “Statistical Quality Assurance Methods for Engineers”, John Wiley and Sons Inc., USA, 2000.
5. Galyer J.F.W and Shotbolt C.R, “Metrology for Engineers”, ELBS, London, 1993.

12A702 AUTOMOTIVE ERGONOMICS AND VEHICLE BODY ENGINEERING

3 1 0 3.5
ERGONOMICS: Introduction, seating dimensions, interior ergonomics, ergonomics system design, seat comfort, suspension seats,
split frame seating, back passion reducers, dash board instruments, electronic displays, commercial vehicle cabin ergonomics,
mechanical package layout, goods vehicle layout. (8+2)

CAR BODY DETAILS: Types: saloon, convertibles, limousine, estate car, racing and sports car. Visibility - Regulations, driver’s
visibility, tests for visibility, methods of improving visibility and space in cars. Car body construction - Design criteria and initial tests.
(8+2)

TRUCK AND SPECIALITY PASSENGER VEHICLES: Commercial vehicle body technology, trends, special goods vehicle, special
haulage vehicles cab body. Buses and coaches PSV (Passenger Specialty Vehicle) structural design, low floor and arcticulated
buses, three wheelers and light weight trailers. (8+2)

VEHICLE BODY ANALYSIS: Introduction, criteria for vehicle body design, sheet metal representation, curved panels, equation for
flexure, torsion, twist and differential bending, beam idealization and flexural axis, instability of thin walled structures. Unit load
method and structural deflection, torsional stiffness car body idealization, symmetric bending and torsional loading, closed integral
car structure, bus body idealization for analysis, bus body in torsion. (10+4)

DESIGN, SAFETY AND FATIGUE ASPECTS: Design for press working, design for spot welding, adhesives and sealants, goods
vehicle structure design, chassis frame configuration, structural properties of chassis frame members. Crash tests, forces in roll
over, head on impact, plastic collapse and analysis, fatigue and vibration, structural vibration. (11+5)

Total L: 45 + T: 15 = 60
TEXT BOOKS:
1. Jnusz Pawlowski, “Vehicle Body Engineering”, Business books limited, 1989.
2. John Fenton, “Handbook of Automotive Body and Systems Design”, John Wiley & Sons, 2005

50
REFERENCES:
1. John Fenton, “Hand Book of Automotive Power Train and Chassis Design”, SAE, 1998.
2. Julian Happian Smith, “Introduction to Modern Vehicle Design”, Butterworth Publisher, 2001.

12A703 INTELLIGENT VEHICLE TECHNOLOGY

3 1 0 3.5
INTRODUCTION: Driver information, driver perception, driver convenience, driver monitoring, general vehicle control, longitudinal
and lateral control, collision avoidance, vehicle monitoring. (8+2)

TELEMATICS: Global positioning system, geographical information systems, navigation system, architecture, automotive vision
system, road recognition. (9+3)

SAFETY SYSTEMS: Active and passive safety, airbags, seat belt tightening system, forward collision warning systems, child lock,
anti lock braking systems, electronic brake distribution (EBD), electronic stability program (ESP), traction control system, lane
departure warning system, adaptive headlight system, day time running lights (DRL), automatic fire fighting system, automatic wiper
system. (10+4)

COMFORT SYSTEMS: Adaptive cruise control system, active suspension system, power steering, collapsible and tiltable steering
column, power windows, eight way seating system and climate control system. (10+4)

SECURITY SYSTEMS: Anti theft technologies – mechanical, electromechanical and electronic immobilizers, alarm system, stolen
vehicle tracking system, remote keyless entry, smart card system, number plate coding. (8+2)

Total L: 45 + T: 15 = 60
TEXT BOOKS:
1. Ronald K Jurgen, “Navigation and Intelligent Transportation Systems – Progress in Technology”, Automotive Electronics
Series. SAE, USA, 1998.
2. Ozguner, Tankut Acarman, Keith Redmill, "Autonomous Ground Vehicles", Artech House Publishers, 2011.

REFERENCES:
1. Robert Bosch, “Automotive Hand Book”, SAE, 2000.
2. Hong Cheng, “Autonomous Intelligent Vehicles: Theory, Algorithms, and Implementation”, Springer, 2011.
3. Robert Bosch GmbH, "Safety, Comfort and Convenience Systems", Wiley, 2007.
4. Robert Bosch GmbH,, Bosch Automotive Handbook", Bentley Publishers, 2011.
5. Ljubo Vlacic, Michel Parent and Fumio Harashima, “Intelligent Vehicle Technologies”, Butterworth-Heinemann Publications,
Oxford, 2001.

12A704 FINITE ELEMENT ANALYSIS

3 1 0 3.5
INTRODUCTION TO FEM: Engineering design analysis-Meaning and purpose, basic concepts of FEM. Applicability of FEM to
structural, heat transfer and fluid flow problems. Advantages and limitations of FEM. Test for convergence. Element choice.
Commercial finite element packages, organization-Advantages and limitations. (4+0)

ONE DIMENSIONAL FINITE ELEMENT ANALYSIS: General procedure of FEM. Skeletal and continuum structures. Discretization
of domain-Basic types of elements. Formulation of element stiffness matrices –One dimensional linear bar element – Quadratic
element , nodal approximation, development of shape functions, element matrices and vectors – Example problems. Extension to
plane truss– Development of element equations, assembly, element connectivity, global equations, solution methods –Beam
element, nodal approximation, shape functions, element matrices and vectors , assembly, solution – Example problems. (10+4)

TWO DIMENSIONAL FINITE ELEMENT ANALYSIS: Introduction, approximation of geometry and field variable – Three noded
triangular elements – Four noded rectangular elements – Higher order elements – Generalized coordinates approach to nodal
approximations, difficulties. Natural coordinates and coordinate transformations – Triangular and quadrilateral elements –
Isoparametric elements, plane problems of elasticity, element equations, assembly, need for quadrature formula, transformations to
natural coordinates – Gaussian quadrature – Example problems in plane stress, plane strain and axisymmetric applications. (10+4)

DYNAMIC ANALYSIS: Equations of motion for dynamic problems. Consistent and lumped mass matrices. Formulation of element
mass matrices. Element equations, solution of Eigen value problems, free vibration problem formulation. (9+3)

HEAT TRANSFER AND FLUID FLOW ANALYSIS: Basic equations of heat transfer and fluid flow problems. Finite element
formulation. One dimensional heat transfer and fluid flow problems. Steady state and transient heat conduction problems. (9+4)

INTRODUCTION TO MACHINE STRUCTURES: Force distribution on different parts of machine structure, design of the parts,
static, dynamic and thermal analysis of the parts using finite element method. Material redistribution to minimize stresses and
deflection. Optimization of location of ribs to maximize rigidity. (3+0)

Total L: 45 + T: 15 = 60

51
PROJECT BASED LAB SESSIONS:
1. The course includes at least one assignment with mathematical modeling and / or simulation of a practical situation.

TEXT BOOKS:
1. Logan D L, “A First Course in the Finite Element Method”, Ceneage Learning India Pvt Ltd, 2007.
2. Chandrupatla T R and Belegundu A D, “Introduction to Finite Elements in Engineering”, Prentice Hall India, 2009.

REFERENCES:
1. John D.A, “Computational Fluid Dynamics – The Basics with Applications”, International Edition, McGraw Hill, New Delhi, 2010.
2. Rao S.S, “The Finite Element Method in Engineering”, Elsevier, 2011.
3. Reddy J.N, “An Introduction to Finite Element Method”, McGraw Hill International, New Delhi, 2009.
4. Seshu P, “A Text book on Finite Element Analysis”, Prentice Hall of India, New Delhi, 2009.
5. Lakshminarayana H.V, “ Finite Element Analysis”, Univercities Press, Hyderabad, 2004.

12A710 DESIGN ANALYSIS LABORATORY

0 0 3 1.5
1. Transient analysis of connecting rod.
2. Crash analysis of bumper.
3. Thermal analysis of piston.
4. Contact stress analysis of leaf spring.
5. Coupled field analysis of brake shoes.
6. Combustion analysis.
7. Aerodynamic analysis.
8. Contact stress analysis of gear pair.
9. Stress analysis of composite structure.
10. Vibration analysis of quarter car model.

Total P: 45
REFERENCE:
1. Laboratory Manual prepared by Department of Automobile Engineering, 2012.

12A720 PROJECT WORK I

0042
1. Identification of a real life problem in thrust areas
2. Developing a mathematical model for solving the above problem
3. Finalisation of system requirements and specification
4. Proposing different solutions for the problems based on literature survey
5. Future trends in providing alternate solutions
6. Consolidated report preparation of the above

Total P: 60

52
 SEMESTER 8

12A820 PROJECT WORK II

0 0 12 6
The project work involves the following:
Preparing a project brief proposal including
Problem identification
A statement of system / process specification proposed to be developed (Block diagram / concept tree)
List of possible solutions including alternative and constraints
Cost benefit analysis
Time Line of activities
A report highlighting the design finalization (based on functional requirements & standards (if any))
A presentation including the following:
Implementation Phase (Hardware / Software / both)
Testing & Validation of the developed system
Learning in the Project
Consolidated project report preparation

Total P: 60

PROFESSIONAL ELECTIVES
(A minimum of three electives are to be opted)

MANUFACTURING ENGINEERING

12A001 MATERIALS FOR AUTOMOBILE INDUSTRY

3003
INTRODUCTION: Classification and characteristics of metals, ceramics, polymers and composites. (3)

IRON AND STEELS: Cast iron – Austempered ductile iron, compacted graphite iron, steels -Plain carbon steels, low alloy steels,
HSLA steels, IF steels, bake hardening steels, TRIP steels, ultra high strength steels, stainless steels - production, properties and
applications. (10)

NON-FERROUS ALLOYS: Aluminium alloys – Cast alloys, wrought alloys, age hardenable alloys, working and heat treatment,
applications in automobiles, Magnesium alloys – Cast and wrought alloys, working and heat treatment, applications. Titanium
alloys. (10)

POLYMERS AND CERAMICS: Processing of polymers, brief description of equipment and process details of extrusion, injection
moulding, thermoforming, blow moulding, concept of polymer design, and selection criteria. Preparation and forming of ceramics,
applications. (10)

COMPOSITE MATERIALS . Production of composite materials and products, moulding and forming of composites, machining and
joining of composites, application of composites in automobiles, metal matrix composites, polymer matrix composites and ceramic
matrix composites, applications. (5)

POWDER METALLURGY: Powder metallurgy – principle, materials and techniques. Automotive applications of powder
metallurgical products. (7)

Total L: 45
TEXT BOOKS:
1. Balram Gupta, “Aerospace Materials”, Vol. 1.2 and 3, Chand & Co., New Delhi 1996.
2. Dieter G.E, “Mechanical Metallurgy”, McGraw Hill, 1997.

REFERENCES:
1. American Society for Metals “Volume 1, 2, 4, 7, 20 and 21”, 1998.
2. John Brown, “Foseco Ferrous and Non Ferrous Foundryman’s Handbook” Butterworth-Heinemann, 1999.
3. Charles A Harper, Ed., “Handbook of Plastics, Elastomers and Composites”, McGraw Hill, 1997.
4. Suong Hoa, "Principals of the Manufacturing of Composite Materials", Destech Publications, 2009
5. Brian Cantor and Patrick Grant,”Colin JohnstonAutomotive Engineering (Light Weight,Functional, and Novel Materials)”,
Cengage Learning Yes Dee Publishing Pvt.Ltd,2010

53
 12A002 PROCESS PLANNING AND COST ESTIMATION
3003
PROCESS PLANNING- Introduction - Process & Production Planning, Process Planning & Concurrent Engineering-Types of
production- standardization - Production design & selection. Selection of processes, tools, cutting parameters & machine tools- Jigs
and Fixtures - Grouping of processes - Sequencing of operations - Selecting primary manufacturing processes for rough & refined
needs - Process capability, Process Charts. Study of pump, foundry process layouts. (10)

MANUAL AND COMPUTER AIDED PROCESS PLANNING: Retrieval type/variant approach, group technology – Generative
approach, logics decision tress and tables, axiomatic approach – AI expert systems – Feature recognition – Applications. Study of
CAPP software. (4)

COST ESTIMATION DIRECT AND INDIRECT COST COMPONENTS: Concepts, differences, different costing methods –
Classification of costs – Cost grid-problems Direct and Indirect costs, Labour – Material cost variances–problems. Overhead cost -
Elements – Factory, administrative, sales and distribution expenses – Methods of absorbing overheads – Direct Labour, Direct
Material, Machine Hour Rate methods – Depreciation, methods, accounting for service department expenses, problems. Cost
break up study of pumps. (12)

MACHINE HOUR RATE COST CALCULATIONS: Machined components–welded components, forged components, powder
metallurgy parts, calculation of sales cost, case studies, use of computers in cost estimation, cost of rejection. OPTIMUM
MACHINING CONDITIONS: Taylor’s equation, deriving the equation for optimum economic cutting velocity– selection of cutting
speed for optimum cost, problems process capability analysis. Study of process time in machine tools. (10)

BREAK EVEN ANALYSIS AND COST MANAGEMENT: Concept, make or buy decision, assumptions, merits and demerits of
break even analysis. Applications. Linear, multi product break-even analysis. Learning curves, product life cycle cost analysis -
Tools and techniques–activity based costing - concepts, cost drivers; introduction to target costing - need and applications.
Preparation of Break even charts for pump manufacturing. (9)

Total L: 45
TEXT BOOKS:
1. Kannappan D, “Mechanical Estimating and Costing”, Tata McGraw Hill Publishing Co. Ltd.,New Delhi, 2003
2. Frederic C Jelen and James H Black, “Cost and Optimization Engineering”, McGraw Hill International Book Company, New
Delhi, 1983.
3. Banga T.R and Sharma S C, “Mechanical Estimating and Costing”, Khanna Publishers, New Delhi, 2002.
4. Kesavon R and others, “Process Planning and Cost Estimation”, New Age International (P) Ltd., Chennai, 2005.

REFERENCE:
1. Samuel Eilon, “Elements of Production Planning and Control”, MacMillan, London, 1985.
2. ASME, “Manufacturing Planning and Estimation-Hand Book”, McGraw Hill, Inc., New Delhi, 1963.
3. Haslehurst M, “Manufacturing Technology”, ELBS, 1985.
4. Gideon Halevi and Roland D. Weill,” Principles of Process Planning “, Chapman & Hall, UK, 1995.
5. Thomas E.Vollmann, “Manufacturing Planning and Control Systems“, Galgotia Publications (P) Ltd, Delhi, 1998.

DESIGN ENGINEERING

12A005 AERODYNAMICS OF ROAD VEHICLES

3003
INTRODUCTION: Scope, historical developments, fundamentals of fluid mechanics, flow phenomenon related to vehicles, external
and Internal flow problem, resistance to vehicle motion, performance, fuel consumption and performance potential of vehicle
aerodynamics, engine cooling requirement, air flow to passenger compartment, duct for air conditioning, cooling of transverse
engine and rear engine. (8)

AERODYNAMIC DRAG OF CARS: Cars as a bluff body, flow field around car, drag force, types of drag force, analysis of
aerodynamic drag, drag coefficient of cars, strategies for aerodynamic development, low drag profiles. (8)

SHAPE OPTIMIZATION OF CARS: Front end modification, front and rear wind shield angle, boat tailing, hatch back, fast back and
square back, dust flow patterns at the rear, effects of gap configuration, effect of fasteners. (10)

VEHICLE HANDLING: Origin of forces and moments on a vehicle, lateral stability problems, methods to calculate forces and
moments – vehicle dynamics under side winds, the effects of forces and moments, characteristics of forces and moments, dirt
accumulation on the vehicle, wind noise, drag reduction in commercial vehicles. (10)

WIND TUNNELS FOR AUTOMOTIVE AERODYNAMICS: Introduction, principle of wind tunnel technology, limitation of simulation,
stress with scale models, full scale wind tunnels, measurement techniques, equipment and transducers, road testing methods,
numerical methods. (9)

54
 Total L: 45
TEXT BOOK:
1. Hucho W H, “Aerodynamic of Road vehicles ", Butterworth Co. Ltd, 1997.

REFERENCES:
1. Vehicle Aerodynamic, SP-1145, SAE, 1996.
2. Pope .A, “Wind Tunnel Testing ", John Wiley & Sons, New York, 1974.
3. Automotive Aerodynamic, Update SP-706, SAE, 1987.

12A006 AUTOMATIC TRANSMISSION

3003

CONCEPT: Principles of automatic transmission, advantages, limitations, types - Mechanical, hydrodynamic, hydro mechanical,
hydro static and electric. (2)

MECHANICAL: Principle of centrifugal clutches, comparison between conventional and centrifugal clutches, centrifugal clutches
used in two wheelers, over drives – Principle, operation, types, advantages and limitations. (7)

HYDRODYNAMIC DRIVES: Principle of fluid coupling, construction, operation and characteristics, fluid coupling with conventional
gear boxes. Introduction to torque converters, comparison between fluid coupling and torque converters, performance
characteristics, slip, principles of torque multiplication, types of torque converters. (9)

HYDRO-MECHANICAL DRIVES: Major components, principle of planetary gear trains, actuating mechanism, controls system –
Types - Manual, governor, throttle and hydraulic control systems. Principle of automatic gear shifting. Positive displacement pumps,
automatic variable displacement pump. Typical automatic transmissions. (9)

HYDROSTATIC DRIVES: Principles of hydrostatic drives, different systems of hydrostatic drives, constant displacement pump and
constant displacement motor, variable displacement pump and constant displacement motor, constant displacement pump and
variable displacement motor, variable displacement pump and variable displacement motor, applications, plunger type pump and
plunger type motor, advantages and limitations, typical hydrostatic drives. (9)
.
ELECTRIC DRIVES: Early Ward Leonard control system - Main features, generator, merits, reverse motion, modified Ward
Leonard control system - Main features, modifications. Modern electric drives - Main features, performance characteristics,
advantages and limitations. (9)

Total L: 45
TEXT BOOKS:
1. Jack Erjavec, “Automatic Transmissions”, Delmar Publishers, 2005.
2. Heinz Heisler, “Advanced Vehicle Technology”, SAE, 2002.

REFERENCES:
1. Theraja B.L, “Fundamentals of Electrical Engineering and Electronics”, S Chand & Company Ltd, 2009.
2. Tucker H.F, “Automatic Transmission”, Van Nostrand Reinhold Company, 1980.
3. Mathias F.B, “Automatic Transmission”, Prentice Hall, 1998.
4. John J.P, Tyler G.H, “Industrial Hydraulics”, MGH Published, 1980.
5. Jack Ejavec,” Automotive Engineering (Automatic Transmissions)” Cengage Learning Yes Dee Publishing Pvt.Ltd,2011

12A007 AUTOMOTIVE ELECTRONICS

(AlsoCommon for ECE, EEE and Mech Engineering Branches)
3003
AUTOMOTIVE ELECTRICALS AND ELECTRONICS: Automotive Mechanical Systems - Vehicle Systems - Power Train System
(air system, fuel system (carburetor & diesel fuel injection, ignition system, exhaust system and other auxiliary systems (cooling,
lubrications & electrical systems)), transmission system (front, rear & 4 wheel drive, manual, automatic transmission, differential).
braking system (drum, disc, hydraulic, pneumatic), steering system (rack and pinion, power steering). Need for Electronics in
Automotive Systems - Performance (speed, power, and torque), control (emission, fuel economy, drivability, and safety) &
legislation (environmental legislation for pollution & safety norms). Overview of Vehicle Electronic Systems - Basic electrical
components and their operation in an automobile - power train subsystem (starting systems, charging systems - Ignition systems –
electronic fuel control), chassis subsystem (ABS, TCS, & ESP) – Comfort and safety subsystems (night vision, airbags, seatbelt
tensioners, cruise control - Lane-departure - Warning, parking). (10)

INTRODUCTION TO EMBEDDED SYSTEMS: Embedded Systems Definition - Components of embedded systems - Hardware
Module - Microprocessor, microcontrollers, on-chip peripherals - Program memory(PM), Data memory (DM), parallel port
structures, timer, input capture & output compare units, ADC, PWM. Introduction to an embedded board. Software module - IDE-
Getting Started - Creating new project, creating new files, adding files to project, compile, build, debug and simulation of a project.
Embedded system programming - Up-loaders, ISP, ROM emulators, in-circuit emulators. Debug Interfaces - BDM and JTAG.

55
Introduction to embedded RTOS - Comparison of conventional OS with RTOS. Tasks & task states (Pre-emptive & Non-pre-
emptive, scheduler, interrupt – Interrupt latency and context switch latency) – Task, multi-tasking, task synchronization, inter-task
communication, shared data problem and its prevention - Features of a typical embedded RTOS (µC/OS-II). (20)

EMBEDDED SYSTEM IN AUTOMOTIVE APPLICATIONS: Engine management systems – Gasoline / diesel systems, various
sensors used in system – Electronic transmission control vehicle safety system – Electronic control of braking and traction. Body
electronics – Infotainment systems – Navigation systems – System level tests – Software calibration using engine and vehicle
dynamometers – Environmental tests for electronic control unit - Application of Control elements and control methodology in
automotive System. (9)

EMBEDDED SYSTEM COMMUNICATION PROTOCOLS: Introduction to control networking – Communication protocols in

embedded systems – SPI, I2C, USB. Vehicle communication protocols – Introduction to CAN, LIN, FLEXRAY, MOST, KWP2000. (6)

Total L: 45
TEXTBOOKS:
1. Denton.T ,” Automobile Electrical and Electronic Systems”, Elsevier Jordan Hill, Oxford, 2010.
2. BOSCH Automotive Handbook, Bentley Publications, Massachusetts Avenue, London, 2010

REFERENCE:
1. Knowles.D, “Automotive Electronic and Computer Controlled Ignition Systems”, Prentice Hall Publications, New Jersey, 2009
2. Joerg Schaeuffele, Thomas Zurawka, “Automotive Software Engineering – Principles, Processes, Methods and Tools”, SAE.
International Publication, 2005
3. Ronald K.J, “Automotive Electronics Handbook”, McGraw Hill Publications, Columbus, 2009
4. Nicholas Navit, “Automotive Embedded System Handbook”, CRC Press Publications, New Delhi, 2008

12A008 AUTOMOTIVE CONTROL SYSTEMS

3003
INTRODUCTION : Open loop and closed loop system – Examples - Elements of closed loop systems - Transfer function of
elements - Modeling of physical systems - Mechanical systems - Translational and rotational systems - Transfer function - Open
loop and closed loop control, elements of closed loop control, introduction to sampled data, digital control and multivariable control
systems - Block diagram – Signal flow graph - Mason's gain formula. (10)

TIME DOMAIN ANALYSIS: Standard Test signals– Time response of second order system- Time domain response -
Performance criteria - Types of systems - Steady state error constants - Generalized error series - Feedback characteristics
of control systems- Introduction to PID Controllers. (7)

SYSTEM STABILITY: Characteristic equation - Routh Hurwitz criterion of stability - Absolute and relative stability - Nyquist stability -
Nyquist stability criterion - Assessment of relative stability – Gain and phase margin. (7)

FREQUENCY DOMAIN ANALYSIS: Polar plots - Magnitude and phase angle curves - Straight line approximation - Corner
frequencies - Bode plots - Assessment of stability - Gain margin and phase margin Assessment- Bode plots for automotive
suspension. (7)

DRIVELINE CONTROL SYSTEM: Drive line modeling - Basic drive line equations- Modeling of neutral gear- Stationary and dynamic
gear shift equation- Drive line speed control modeling – Transmission torque control criterion – Torque control design. Signal flow
graph model for transmission system. (7)

ANTI – LOCK BRAKING CONTROL SYSTEMS: Anti-lock braking control systems, control cycles of ABS system - Control of the
yaw dynamics-PID for ABS system - Mathematical model for ABS model- vehicle controllability – Vehicle motion characteristics and
controllability-Possibility of handling quality evaluation based on driver model –Stability analysis for ABS model.
(7)
Total L: 45
TEXT BOOKS:
1. Kiencke and Nielsen,” Automotive control systems”, Springer /SAE – Verlag Berlin Heidelberg, 2007.
2. Ogata K, “Modern Control Engineering”, Pearson/Prentice-Hall Of India Pvt Ltd., New Delhi, 2008

REFERENCES:
1. Galip Ulsoy, Huei Peng, “Automotive Control Systems”, Cambridge University Press, London, 2012.
2. Wong J.Y, “Theory of Ground Vehicles”, John Wiley & Sons, New York, 2008.
3. Nagrath I.J, and Gopal M, “Control Systems Engineering", Prentice Hall of India, New Delhi, 2008.
4. Micheal Blundell and Damian Harty, “Multibody Systems Approach to Vehicle Dynamics”, Elsevier Jordan Hill, Oxford, 2006.
5. Masato Abe, “Vehicle Handling Dynamics”, Elsevier Jordan Hill, Oxford, 2009.

56
 12A009 AUTOMOTIVE PRODUCT DEVELOPMENT STRATEGIES
3003
INTRODUCTION TO PRODUCT DESIGN: Introduction, principles of new product development, success and failure in new
products, risk management, funnel and its stages, quality control of product development and meeting targets. The principles of
product styling-virtual perception of product style, attractiveness and product styling process. (9)

PRODUCT PLANNING: Product planning process, aim and opportunities in product planning, competing product analysis, style
planning, factors of contextual styling and Intrinsic styling, styling specifications. (9)

GLOBAL PRODUCTS AND ITS PROBLEMS: Importance, challenges and opportunities of global products, changes and
complexity in global products, global product problems – addressing potential problems, multiple causes and its effects, root cause
and network of causes and measures, everyday product problems and action. (9)

PLM ENABLING GLOBAL PRODUCTS: Product lifecycle management (PLM), key characteristics and functions, importance,
benefits of PLM, metrics and targets of PLM, PLM applications – data/document management, part/product management,
process/workflow management, program/project management etc. (9)

CHANGES FOR GLOBAL PRODUCTS: Changing roles of product organizations, increased regulation of product, better managed
product, multiple of new products, breakthrough computer aided product development. (9)
Total L: 45
TEXTBOOKS:
1. John Stark, “Global Products”, Springer-Verlag London Ltd, 2010.
2. Mike Baxter, “Product Design”, Stanley Thornes Publishers Ltd., UK, 1999.

REFERENCES:
1. Karl T. Ulrich and Steven D. Eppinger, “Product Design And Development”, Tata Mcgraw-Hill Publication, 2003.
2. David L. Rainey, “Product Innovation”, Cambridge University Press, 2005.
3. Anil Mital, Anoop Desai, Anand Subramanian and Aashi Mital, “Product Development”, Butterworth-Heinemann Publications,
2008.
4. Michael Z. Brooke and William Ronald Mills, “New Product Development”, Jaico Publishing House, 2008.
5. Antti Saaksvuori and Anselmi Immonen, “Product Lifecycle Management”, Springer, 2009.

12A010 DESIGN FOR MANUFACTURE AND ASSEMBLY

3 1 0 3.5
DFM APPROACH, SELECTION AND SUBSTITUTION OF MATERIALS IN INDUSTRY: DFM approach, DFM guidelines,
standardisation, group technology, value engineering, comparison of materials on cost basis. (6+2)

TOLERANCE ANALYSIS: Process capability, process capability metrics, Cp, Cpk , cost aspects, feature tolerances, geometric
tolerances, surface finish, review of relationship between attainable tolerance grades and different machining process, cumulative
effect of tolerances, sure fit law, normal law and truncated normal law, 6 concept. (6+2)

SELECTIVE ASSEMBLY: Interchangeable and selective assembly, deciding the number of groups, Model-I: group tolerances of
mating parts equal; Model-II: total and group tolerances of shaft, control of axial play-introducing secondary machining operations,
laminated shims, examples. (6+2)

DATUM SYSTEMS: Degrees of freedom, grouped datum systems - Different types, two and three mutually perpendicular grouped
datum planes, grouped datum system with spigot and recess, pin and hole, grouped datum system with spigot and recess pair and
tongue-slot pair, computation of translational and rotational accuracy, geometric analysis and applications. (5+2)

TRUE POSITION TOLERANCING THEORY: Comparison between co-ordinate and convention method of feature location,
tolerancing and true position tolerancing, virtual size concept, floating and fixed fasteners, projected tolerance zone, assembly with
gasket, zero true position tolerance, functional gauges, paper layout gauging, compound assembly, examples. (6+2)

FORM DESIGN OF CASTINGS AND WELDMENTS: Redesign of castings based on parting line considerations, minimising core
requirements, redesigning cast members using weldments, use of welding symbols – Case studies. (5+2)

DESIGN FOR MACHINING: Design features to facilitate machining, datum features - Functional and manufacturing, component
design-machining considerations, redesign for manufacture, examples. (5+1)

TOLERANCE CHARTING TECHNIQUE: Operation sequence for typical shaft type of components, preparation of process drawings
for different operations, tolerance worksheets and centrality analysis, examples. (6+2)

Total L: 45 + T: 15 = 75

57
TEXTBOOKS:
1. Harry Peck, "Designing for Manufacture", Pitman Publications, London, 1983.
2. Krulikowski A, “Fundamentals of Geometric Dimensioning and Tolerancing, Delmar Publishers, New York, 1991.

REFERENCES:
1. Spotts M. F, "Dimensioning and Tolerance for Quantity Production", Prentice Hall Inc., New Jersey, 1983.
2. Oliver R Wade, "Tolerance Control in Design and Manufacturing", Industrial Press Inc., New York, 1967.
3. James G Bralla, "Hand Book of Product Design for Manufacturing", McGraw Hill Publications, 1983.
4. Trucks H E, "Design for Economic Production", Society of Manufacturing Engineers, Michigan, 1987.
5. Creveling C. M, "Tolerance Design - A Hand Book for Developing Optimal Specifications", Addison Wesley Longman
Inc.,USA, 1997.
6. Pahl.G and Beitz .W, "Engineering Design-Systematic Approach", Springer Verlag Publications, 1996.

12A011 MECHATRONICS
3003
INTRODUCTION: Introduction to mechatronics systems, need and applications, role of mechatronics in automation for automotive
assembly, manufacturing, products and design and elements of mechatronics. (7)

TRANSDUCERS AND SENSORS: Importance of sensors in mechatronics, static and dynamic characteristics of sensors.
Classification – Transducers for measurement of displacement, strain, position, velocity, flow, pressure, temperature, humidity,
vibration, liquid level and light sensors. (7)

CONTROL ELEMENTS AND ACTUATORS: Control elements - ON/OFF push buttons, control relays, contactors, selector
switches, micro switches and solid state switches. Actuators - Solenoids, AC and DC motors, servo, stepper and linear motors.
Hydraulic and pneumatic controls - Control valves, cylinders and hydro motors - PLC systems for automotive industry. (8)

MICROPROCESSORS: Microprocessors - Introduction, 8085 architecture, types of memory, machine cycles and timing diagram,
addressing modes, instruction set, development of simple programs - Interfacing 8255: Basic concepts of I/O, I/O mapping and
memory mapping, 8255 block diagram, port structure, Interrupts, multiple interrupt processing. Applications-seven segment display
interface, keyboard interface. (10)

MICROCONTROLLER: 8051 Microcontroller architecture, registers, addressing modes, interrupts, port structure, timer blocks and
applications - Temperature control and stepper motor speed control. (7)

CASE STUDY: Steer by wire (SBW)- Drive by wire(DBW) - Brake by wire(BBW), propulsion mechatronic control system for fuel cell
electric vehicle. (6)

Total L: 45
TEXT BOOKS:
1. Bolton W, “Mechatronics”, Pearson Education Asia, New Delhi, 2009.
2. Fijalkowski B.T, “Automotive Mechatronics - Operational and Practical Issues Volume I and II” Springer Heidelberg Berlin,
2011.

REFERENCES:
1. Ramesh S Gaonkar, “Microprocessor Architecture, Programming, and Applications with the 8085”, Penram International,
Mumbai, 2008.
2. Nitaigour Premchand Mahalik, “Mechatronics- Principles, Concepts and Applications”, Tata McGraw Hill, New Delhi, 2009.
3. Doeblin E O, “Measurement Systems”, Tata McGraw Hill, New Delhi, 2011.
4. Kenneth J Ayala, “8051 Microcontroller, Architecture, Programming and Applications”, Cengage Learning, Mumbai, 2008.

12A012 SPECIAL VEHICLES

3003
TRACTORS: General description, specification and functions, light, medium and heavy wheeled tractors, crawler tracks mounted /
wheeled - Bull dozers, tilt dozers and angle dozers, front end loaders, factors affecting efficiency of output of tractors, simple
problems, merits and demerits. (4)

CRANES AND EXCAVATORS: General description, specifications and functions, excavator mounted cranes, mobile cranes with
strut and cantilever type jibs, tractor towed and tractor mounted cranes. General description, specification and functions,
classification based on attachments, face shovel, drag shovel, hoe, drag-line and grab or clam shell, advantages and limitations. (10)

GRADERS: Description, specification of tractor towed graders and motor graders, classification and functions of graders, functional
details of spreading, mixing, ditching, bank sloping, snow removal, stripping, scarifying, and finishing, elementary details of
transmission system (coupling, clutches, gear box, driving axles, propeller shafts), running gear and operating equipment air braking

58
system; hydraulic system and its components, steering system of lights, medium and heavy graders, merits and limitations of
graders. (8)

HAULAGE VEHICLES AND LIFT TRUCKS: General description, specification and functions, self-propelled and tractor towed
haulage vehicles and pneumatic – tires, dumpers – front tipping; trucks – rear tipping, tractor towed semi-trailers and trailers (rear
and side tipping, bottom dumping). General description, specification and functions, fork lift trucks, alternative front end equipment
(attachments) – Jib arm, shovel bucket, squeeze clamp, boom, fork extensions, barrel forks. Scissors lift trucks - Applications in
industry, advantages and disadvantages. (7)

ROOTERS, SCARIFIERS AND SCRAPERS: General description, specification and functions, tractor towed rooters and scarifiers -
Heavy duty, light duty. General description, specification and functions, tractor towed and motorized scrapers, scraper work in
cutting, cambering, side hill cutting, spreading on embankments, compaction of fill merits and demerits. (8)

COMPACTION VEHICLES AND OTHER SPECIAL PURPOSE VEHICLES: General description, specification and functions,
smooth wheeled rollers, pneumatic tired rollers, agricultural Rollers, sheep’s foot rollers, vibrating compactors. General description,
specification and functions, Ambulance, oil tankers, surveillance vehicle, television recording mobile unit, reefer vehicle, double
decker bus, vestibule bus, fire fighting vehicle. (8)

Total L: 45
TEXT BOOKS:
1. Peurifoy R.L “Construction planning, equipment and methods”, Tata McGraw-Hill Publishing Company, New Delhi, 2002.
2. Ian Graham, “Off-Road vehicles”, Heinemann Library, 2008

REFERENCES:
1. Wong J “ Terramechanics and Off-Road Vehicle Engineering”, Butterworth-Heinemann, 2009
2. Rovira Más, Francisco, Zhang, Qin, Hansen, Alan C, “Mechatronics and Intelligent Systems for Off-road Vehicles”, Springer,
2011
3. Roninson E.G, “Motor Graders”, MIR Publications, Moscow, 1985.
4. Rodhiev and Rodhiev, “Tractors and Automobiles”, MIR Publishers, Moscow, 1984.
5. Greenwich and Soreking, “Tractors“, MIR Publishers, Moscow, 1967.

12A013 VEHICLE CONCEPT STYLING AND DESIGN

3003
INTRODUCTION: Drawing in product design, drawing by hand, drawing by computer, mass production, geometric versus
naturalistic drawing, modernist design. Basic drawing skills - Perspectives, metric projections, spherical projections, orthographic
projections, sections and scrap views. Tools and materials - Pencils, pens, erasers, markers, paints, ink, airbrush, drawing
instruments, paper and aboard. (9)

COMPUTER SYSTEMS: The computer processor, system software, the central processing unit, memory, frame buffers, display,
input devices, hardcopy output, 3D output devices, networking, healthy and safety. Concept design - Satisfying the client, sketch,
schematic, evaluating the design, 3D modeling concepts, hybrid approach, commercial computer solutions, drawing in space,
creating organic forms. (9)

PRESENTATION DRAWING AND VISUALS: From watercolor washes to markers, painting by numbers, the art of design, visual
tricks, making marker drawing, 2D computer programs: paint and vector, 3D computer aided styling (CAS), creating virtual reality,
shading a computer model, ray tracing and radiosity, adding texture, fractals and commercial modelers. (9)

FROM GENERAL ARRANGEMENTS DRAWING TO PRODUCTION: Technical production documentation, the general
arrangement drawing, drafting standards, computer aided drafting, geometric constructions, controlling curves, parametric design,
CAD data - Exchange standards and all change in the CAD market. (9)

TECHNICAL ILLUSTRATION: Art of technical illustration, techniques of technical illustration, thick and thin lines, sections,
cutaways and ghosting, photo-tracing, annotation and labeling, computer aided illustration, interactive technical illustration and
commercial solutions. (9)

Total L: 45
TEXT BOOKS:
1. Alan Pipes, “Drawing for Designers”, Laurence King Publishing, 2007
2. Erik Olofsson, Klara Sjölén, “Design Sketching”, Keeos Design Books AB, 2005

REFERENCES:
1. Tony Lewin, Ryan Borroff, “How to Design Cars Like a Pro”, MotorBooks International, 2010.
2. Stuart Macey, Geoff Wardle, Ralph Gilles, Freeman Thomas, Gordon Murray , “H-Point: The Fundamentals of Car Design &
Packaging”, Design Studio Press, 2009
3. Thom Taylor, “How to Draw Cars Like a Pro”, MotorBooks International, 2006

59
 THERMAL ENGINEERING

12A017 AUTOMOTIVE AIR CONDITIONING

3003
INTRODUCTION: Air conditioning system - Schematic layout, compressor, condenser, expansion valve, evaporator, controlling
evaporator temperature, evaporator pressure regulator, evaporator temperature regulator. (9)

PSYCHROMETRY: Moist air behaviour, psychrometric chart, psychrometric processes - Summer and winter airconditioning, cooling
load calculations. (9)

REFRIGERANT: Properties of refrigerants, common refrigerants, containers, handling refrigerants, tapping into the refrigerant
container, ambient conditions affecting air conditioning system, refrigeration system diagnostics. (9)

AIR ROUTING & TEMPERATURE CONTROL: Evaporator care, air flow through recirculation unit and automatic temperature
control. Duct system - Controlling flow, vacuum reserve, testing the air control and handling systems. (9)

AIR CONDITIONING: Automotive heaters - Heater system, manually and automatically controlled air conditioner, air conditioning in
cars, busses, trucks, location, working and maintenance. (9)

Total L: 45
TEXT BOOK:
1. Boyce H Dwiggins, "Automotive Air conditioning", Cengage Learning, Stamford, 2002.
2. Arora C.P, “Refrigeration & Air conditioning” Tata McGraw Hill, New Delhi 2000.

REFERENCES:
1. Steven Daly “Automotive Air Conditioning and climate control systems”, Butterworth Heinemann, Burlington, 2011.
2. Russel Carrigan, John Eichelberer, “Automotive Technology Heating and Air Conditioning”,Cengage Learning, Stamford, 2011.
3. Mark Schnubel, “Automotive Engineering Heating & Air Conditioning”, Cengage Learning, Stamford, 2010.
4. Russell Carrigan and John Eichelberger,” Automotive Technology(Heating and Air Conditioning)”, Cengage Learning Yes Dee
Publishing Pvt.Ltd,2011.
5. Mark Schnubel,” Automotive Engineering (Heating and Air Conditioning -Classroom Manual)”, Cengage Learning Yes Dee
Publishing Pvt.Ltd,2010

12A018 MODELLING AND SIMULATION OF INTERNAL COMBUSTION ENGINES

3003
MODELING OF IC ENGINES: Heat of reaction - Hrp and Urp calculations, adiabatic, constant volume combustion, constant pressure
combustion, temperature drop due to fuel vaporization, adiabatic flame temperature, mean effective pressure, torque and thermal
efficiency at full throttle, part throttle and supercharged conditions. Spray models, flow models and combustion models. (9)

COMBUSTION IN SI ENGINES: Combustion in premixed flames - Stages of combustion, flame propagation, rate of pressure rise,
cycle-to-cycle variation, abnormal combustion – Theories and effect of engine operating variables on combustion. (9)

COMBUSTION IN CI ENGINES: Combustion in diffusion flames - Droplet and spray combustion theory, stages of combustion,
delay period, peak pressure, heat release, gas temperature and diesel knock. (9)

SIMULATION OF IC ENGINES: SI and CI engine simulation – Air standard cycle, fuel-air cycle, progressive combustion cycle and
actual cycle simulation – Part throttle, full throttle and supercharged conditions. (9)

SIMULATION OF NEW ENGINE CONCEPT: Dual fuel engine, low heat rejection engine, lean burn engine, variable compression
ratio engine, homogeneously charged compression ignition engine and controlled auto ignition engine. (9)

Total L: 45
TEXT BOOKS:
1. Ganesan V, “Computer Simulation of Spark-Ignition Engine Processes“, Universities Press (I) Ltd, Hyderabad, 1996.
2. Ganesan V, “Computer Simulation of Compression-Ignition Engine Processes”, University Press (I) Ltd, Hyderabad, 2000.

REFERENCES:
1. Ganesan V, “Internal Combustion Engines”, Tata McGraw-Hill Publishing Company Ltd., New Delhi, 2008.

60
2. Heywood J.B, “Internal Combustion Engine Fundamentals” McGraw Hill Book Co., USA, 1988.
3. Ramoss A.L, "Modeling of Internal Combustion Engines Processes", McGraw Hill Publishing Co., 1992.
4. Ashley Campbel, "Thermodynamic analysis of combustion engines", John Wiley & Sons, New York, 1986.
5. Benson R S, whitehouse.N.D., "Internal Combustion Engines", Paragon Press, Oxford, 1979.

12A019 ELECTRIC, HYBRID AND FUEL CELL VEHICLES

3003

ELECTRIC VEHICLES: Layout of an electric vehicle, performance of electric vehicles – Traction motor characteristics, tractive
effort, transmission requirements, vehicle performance, energy consumption, advantage and limitations. (9)

HYBRID VEHICLES: Hybrid electric drivetrains - Concepts, architecture, design, control strategies, merits and demerits. (9)

ELECTRIC PROPULSION SYSTEMS: DC motor drives, induction motor drives, permanent magnet motor drives and switched
reluctance motor drives. (9)

ENERGY STORAGE DEVICES: Electrochemical batteries – Reactions, thermodynamic voltage, lead-acid batteries, nickel based
batteries, lithium based batteries, flywheel and ultra-capacitors. (9)

FUEL CELL VEHICELS: Fuel cell thermodynamics, operating principle, fuel cell technologies, fuel reforming, hydrogen production
and storage. (9)

Total L: 45
TEXT BOOKS:
1. Mehrdad Ehsani, Yimin Gao, sebastien E. Gay and Ali Emadi, “Modern Electric, Hybrid Electric and Fuel Cell Vehicles:
Fundamentals, Theory and Design”, CRC Press, 2009.
2. Iqbal Husain, “Electric and Hybrid Vehicles: Design Fundamentals, CRC Press, 2011.

REFERENCES:
1. Seref Soylu “Electric Vehicles - The Benefits and Barriers”, InTech Publishers, Croatia, 2011.
2. Aulice Scibioh M. and Viswanathan B., “Fuel Cells – Principles and Applications”, University Press, India, 2006.
3. Barbir F., “PEM Fuel Cells: Theory and Practice” Elsevier, Burlington, 2005.
4. James Larminie and John Loury, “Electric Vehicle Technology-Explained”, John Wiley & Sons Ltd., 2003.
5. Hoogers G., “Fuel Cell Handbook” CRC Press, 2003.

12A020 ADVANCED THEORY OF INTERNAL COMBUSTION ENGINES

3003
COMBUSTION PROCESSES: Combustion in premixed and diffusion flames, combustion process in IC engines, adiabatic flame
temperature, effect of super charging and scavenging on combustion. (9)

ABNORMAL COMBUSTION IN SI ENGINES: Stages of combustion, flame propagation, rate of pressure rise, cycle-to-cycle
variation, abnormal combustion, theories of detonation, heat release. (9)

COMBUSTION AND KNOCK IN CI ENGINES: Droplet and spray combustion theory, stages of combustion, delay period, peak
pressure, heat release, gas temperature, diesel knock. (9)

COMBUSTION OF FUELS: Combustion stoichiometry of petrol, diesel, alcohol and hydrogen fuels, chemical energy and heating
values, chemical equilibrium and maximum temperature, flame velocity and area of flame front, fuel spray characteristics - Droplet
size, penetration and atomization. (10)

ADVANCED IC ENGINES: Adiabatic and low heat rejection engines, homogeneously charged compression ignition engines - MAN
combustion chamber and multi-fuel engines, stratified charged and lean burn engines. (8)

Total L: 45
TEXT BOOKS:
1. Heywood J B, “Internal Combustion Engine Fundamentals” McGraw Hill Book Co., USA, 1988.
2. Ganesan V. “Internal Combustion Engines", Tata Mc-graw Hill Publishing Co. Ltd., New Delhi 2008.

REFERENCES:
1. Lewis B, Pease.R.N. and Taylor.H.S., "Combustion Process High Speed Gas dynamics and Jet Propulsion Series", Princeton
University Press, New Jersey, 1976.
2. Taylor E.F, “The Internal Combustion Engines", International Book Co., Pennsylvania, 1982.
3. Spalding D.B, “Some Fundamental of Combustion", Butterworth Science Publications, London, 1985.

61
4. Ganesan V, “Computer Simulation of Spark Ignition Engine Processes", Universities Press (India) Ltd, Hyderabad, 1996.
5. Ganesan V, “Computer Simulation of Compression Ignition Engine Processes", Universities Press (India) Ltd, Hyderabad,
2000.

12A021 ALTERNATIVE FUELS

3003
GASEOUS FUELS: Properties, composition, production, storage, engine modifications, combustion, performance and emission
characteristics in SI and CI engines, advantages and disadvantages of compressed natural gas (CNG), liquefied petroleum gas
(LPG), hydrogen and ammonia. (10)

ALCOHOL FUELS: Properties, composition, production, storage, engine modifications, blends, combustion, performance and
emission characteristics in SI and CI engines, advantages and disadvantages of methanol ethanol and butanol. (10)

BIO-FUELS: Properties, composition, production, engine modifications, treatment, blends, performance and emission
characteristics, advantages and disadvantages of straight vegetable oils, bio-diesel and biogas. (9)

SYNTHETIC FUELS: Properties, composition, material compatibility, engine modifications, performance and emission
characteristics, advantages and disadvantages of hydrogen with CNG, dimethyl ether (DME), diethyl ether (DEE), syngas, producer
gas and plastic fuel. (8)

DUAL-FUEL AND MULTI-FUEL ENGINES: Technology, working principle, conversion of engine, operation, combustion,
performance and emission characteristics, advantages and disadvantages. (8)

Total L: 45
TEXT BOOKS:
1. Thipse S.S., “Alternate Fuels – Concepts, Technologies and Dvelopments”, Jaico Publishing House, Delhi, 2010.
2. Richard L. Bechfold, “Alternative Fuels Guide Book”, SAE International, Warrendale, 1997.

REFERENCES:
1. Ganesan V. “Internal Combustion Engines", Tata Mc-graw Hill Publishing Co. Ltd., New Delhi, 2012.
2. Mathur L and Sharma R.P, “Internal Combustion Engines”, Dhanpat Rai Publications (P), Ltd, New Delhi, 2002.
3. “Alcohols as motor fuels progress in technology”, Series No.19, SAE Publication, USA, 1980.

12A022 COMPUTATIONAL FLUID DYNAMICS

3003
INTRODUCTION: Application areas of CFD, Basic concepts of fluid flow - Governing equations, conservation of mass, momentum
and energy – Navier-stokes and energy equation for Newtonian fluid, Mathematical classification of flow - Hyperbolic, parabolic,
elliptic and mixed flow types. (8)

DISCRETISATION: Finite difference method - Forward, backward and central difference schemes, explicit and implicit methods -
Numerical solution for heat transfer and fluid flow problems for steady state and transient conditions, stability analysis and error
estimation. Grid generation - Choice of grid, grid oriented velocity components, cartesian velocity components, staggered and
collocated arrangements. (13)

CFD TECHNIQUES: Lax - Wendroff technique, MacCormack’s technique, relaxation technique. ADI technique, pressure correction
technique, SIMPLE algorithm. Fluid flow and convection problems - Upwind scheme and stability criteria. (9)

TURBULENCE MODELING: Turbulence energy equation - One-equation model, k-ω model and k- ε model. (9)

CASE STUDIES: Modelling and analysis of heat transfer, fluid flow and automobile components using CFD packages. (6)

Total L: 45
TEXT BOOKS:
1. John D Anderson, “ Computational Fluid Dynamics – The Basics with Applications”, McGraw Hill, New York, 1995.
2. Muralidhar K and Sundararajan T, “Computational Fluid Flow and Heat Transfer”, Narosa Publications, New Delhi, 2003.

REFERENCES:
1. Chung T.J, “Computational Fluid Dynamics”, Cambridge University Press, London, 2002.
2. David C Wilcox, “Turbulence Modeling for CFD”, DCW Industries, Inc, 1993.
3. Versteeg H.K and Malalasekara W, “An Introduction to Computational Fluid Dynamics - The Finite Volume Method', Longman,
1995.

62
 INDUSTRIAL ENGINEERING

12A026 VALUE ENGINEERING

3003
INTRODUCTION: Principle of value engineering, recommendations and programme advantages. Value engineer’s role, evaluation
of function, determining function, classifying function, evaluation of costs, evaluation of worth, determining worth and evaluation of
value. Cost estimation of product. (9)

VE JOB PLAN: Introduction, orientation, information phase, speculation phase, analysis phase, development phase,
implementation phase, and follow up phase. Study of a product for functions. (9)

SELECTION AND EVALUATION OF VE PROJECTS: Projects selection, methods, value standards, application of VE
methodology. General, functional concept, centralization, decentralization of VE staff, training - Industrial training – conduct of
training, continuous training and cost of training.Study of process for functions. (10)

FAST DIAGRAMMING AND VE LEVEL OF EFFORT: Value decision, decision process, queuing theory and Monte Carlo Method,
cost models, life cycle costs. VE team, co-ordinator, designer, different services, definitions, construction management contracts,
value engineering case studied. To draw FAST for a process. (10)

CASE STUDY: Case studies related to human resource, manufacturing and marketing field. (7)

Total L: 45
TEXT BOOKS:
1. Tufty Herald G, "Compendium on Value Engineering", The Indo American Society, 1983.
2. James H Janson, “Value Engineering in Manufacturing”, Prentice Hall, New Jersey, 1967.

REFERENCES:
1. Miles L.D, "Techniques of Value Engineering and Analysis", McGraw Hill, New York, 1972.
2. Khanna O.P, "Industrial Engineering and Management", Dhanpat Rai and Sons, New Delhi, 1993.

12A027 COMMERCIAL FLEET OPERATION

3003
INTRODUCTION: Modes of transport, road transport - Types of roads, advantages, motor transport in India. (5)

TRANSIT OPERATION: Route planning - Route location, stop location, route schedules, vehicle and labor scheduling. Traffic
control - Traffic signals, signal timing. (6)

FORMS OF OWNERSHIP: Sole proprietorship, partnership, private limited company, public limited company, statutory company,
local authority undertaking / municipal transport company, joint venture. (6)

COSTS & FARES: Operating costs and types of vehicles - types of fare structure, types of fare collecting methods - Requirement
of buses and frequency, construction of bus station. (6)

GARAGE MANAGEMENT AND VEHICLE MAINTENANCE : Garage administration, types of garages, one spanner, two spanner,
three spanner, break down truck symbol, government approved workshops – Tools- Objectives of maintenance, breakdown
maintenance, preventive maintenance, tyre maintenance tips and failures. Fuel saving techniques, fitness certificate. (10)

LEGAL ASPECTS: Motor vehicle act - Registration, necessity of permits, insurance, test of competence to drive, mistake / offences
for which a driver can be punished, adult workers - Hours of work, running time, split duty, journey time, round journey time,
layover, frequency. (12)

Total L: 45
TEXT BOOKS:
1. John Dolu, manage "Fleet management ", McGraw-Hill Co., 1984.
2. Crouse, William H, Anglin, Donald L, “Automotive Mechanics”, McGraw-Hill Companies, 2007.

REFERENCES:
1. Government Publication, "The Motor vehicle Act ", 1988.
2. Kitchin L.D, "Bus operation ", llliffe and Sons Ltd., London, 1992.
3. Gilles, Tim, “Automotive Service – Inspection, Maintenance, and Repair”, Alar Elken Publications, 2007.
4. Khanna O.P,” Industrial Engineering and Management”, Dhanpat Rai Publications, 2010.

63
 12A028 QUALITY ASSURANCE AND RELIABILITY
3003

STATISTICAL QUALITY CONTROL AND ACCEPTANCE SAMPLING. Statistical basis for control charts-control limits, control
charts for variables, attributes and defects, Single sampling plans for attributes. Double, multiple and sequential sampling. Military
standard 105 E (ANSI/SSQC Z1.4, 150 2859). Dodge – Romig sampling plans. (9)

PROBABILITY, RANDOM VARIABLE AND HYPOTHESIS. Axiomatic approach to probability - Law of addition of probability,
multiplication law of probability, conditional probability. Bayes theorem. Discrete random variable and distribution, Continuous
random variable and distribution, Level of significance-type I and type II errors, large sample tests, small sample tests, Tests based
on t, F, and chi-square distributions. (9)

CONCEPTS OF RELIABILITY. Definition of reliability. Definition of failure. Measures of reliability- failure rate, Mean Time To
Failure (MTTF), Mean Time Between Failure (MTBF),Derivation of the reliability function, reliability specifications. Classification of
failures. (9)

FAILURE PATTERNS, FITTING CURVES AND SYSTEM RELIABILITY. The bath tub curve-early failure period, constant failure
period, wear out failure period. Weibull distribution to describe bath tub curves-estimation of Weibull parameters, Weibull probability
plot, Series systems, parallel systems, mixed series and parallel systems, (k, n) systems, complex systems. (9)

TQM, QUALITY MANAGEMENT SYSTEMS AND SUPPORTING TOOLS. Total Quality Management (TQM), Introduction to quality
management systems -overview of ISO 9000 and 14000 series of standards, QS 9000, Tools of management, quality costing,
Quality Function Deployment (QFD) - quality project approach and the problem solving process, Six Sigma. (9)

Total L: 45
TEXT BOOKS:
1. Montgomery Douglas C, “Introduction to Statistical Quality Control”, John Wiley and Sons, Inc., New Delhi, 2001.
2. Ebeling Charles E, “An Introduction to Reliability and Maintainability Engineering”, Tata McGraw Hill Publishing Company, New
Delhi, 1997.

REFERENCES:
1. Eugene Grant, Richard Leavenworth, “Statistical Quality Control”, Seventh Edition, McGraw Hill, New York, 2000.
2. Fiegenbaum A.V, “Total Quality Control”, McGraw Hill Inc., New York, 1991.

12A029 PNEUMATIC CONTROL FOR AUTOMATION

3003
AUTOMATION: Introduction - fundamental concepts in manufacturing and automation, definition of automation, reasons for
automation, types of production and types of automation, automation strategies, levels of automation, Detroit type automation. (5)

PNEUMATIC SYSTEMS: Application of pneumatics, physical principles, basic requirement of pneumatic system, comparison with
hydraulic systems. Elements of pneumatics, constructional details of air compressors, air motors, pneumatic control valves,
actuators and mountings, filter, lubricator, regulator, types of cylinders. (8)

PNEUMATIC CIRCUITS: Basic pneumatic circuit, impulse operation, speed control, pneumatic motor circuit, sequencing of motion,
time delay circuits and their applications. (6)

PNEUMATIC CONTROL SYSTEM: General approach to control system design, symbols and drawing, schematic layout, travel step
diagram, circuit, control modes, program control, sequence control, Cascade, Karnaugh-Veitch mapping method, air hydraulic
control, fringe condition modules, start, emergency, start restriction, typical application circuits. (11)

ELECTRO PNEUMATIC AND PLC: Compound circuit, combinational circuit, ladder diagram, Programmable Logic Controller (PLC)
configuration, input, output ports, memory, timers and counters, PLC programming, advantages and limitations of PLC. (8)

SENSORS: P/E converter – optical, capacitance type, inductive type, reflexive nozzle, back pressure nozzle, interruptible airjet,
principle of operation and applications of proportional and servo valves, pneumatic sensors and applications. (7)

Total L: 45
TEXT BOOKS:
1. Wener Deppat and Kurt Stoll, “Pneumatic Control”, Vogel Buch Verlag Wruzbutg, 1987.
2. Peter Rohner, “Fluid Power Logic Circuit Design”, Mac Miller Company Publishers, 1979.

64
REFERENCES:
1. Festo K.G, “Pneumatic Tips”, Festo, Germany, 2009
2. Srinivasan R, “Hydraulics and Pneumatic Controls”, Vijay Nicole Imprint Pvt. Ltd, 2004.
3. Pippenger, J.J, “Industrial Hydraulics & Pneumatics”, McGraw Hill, 2002.
4. Esposito, Anthony, “Fluid Power with Applications”, Pearson Education, 2000.
5. Andrew Parr, “Hydraulics and Pneumatics”, Jaico Publishing House, 1999.

12A030 AUTOMOTIVE EMBEDDED SYSTEMS

3003
ELECTRONICS IN AUTOMOBILE: Power train Management – MPFI, GDI & CRDI, ignition systems, body and convenience
electronics, vehicle power supply controllers, lighting modules, door control modules, safety anti-lock braking system, electronic
stability program, supplementary restraint system, traction control system – 42 V technology. (9)

DRIVE-BY-WIRE: Challenges and opportunities of X-by-wire system & design requirements, steer-by-wire, brake-by-wire, electronic
throttle including adaptive cruise control, shift-by-wire. Semiconductor concepts for X-by-wire systems. (8)

HARDWARE MODULES: 16-bit Infineon microcontrollers-architectural overview of C166 family-memory organization, fundamental
CPU concepts and optimization measures, on-chip system resources, peripheral event controller (PEC) ad interrupt control, external
bus interface, parallel ports, general purpose timers(GPT), watchdog timer, serial channels, capture/compare units, pulse width
modulation unit, analog to digital converter, real time clock, on-chip I2C bus module, on-chip CAN module, universal serial bus
(USB) interface, SDLM interface, power management monitoring features, special features of XC166 family. Introduction to 32-bit
tri-core architecture. (10)

SOFTWARE DEVELOPMENT TOOLS: Introduction to KEIL integrated development environment (IDE), creating new project,
creating new file, adding files to project, options for target, compile and building project, simulation and debugging, set breakpoints,
monitor on-chip peripherals using simulators, study of example programs. Introduction to digital application virtual engineer (DAVE)
software, configuring the on-chip resources using DAVE software, automatic code generation using DAVE software. (9)

INTEGRATION OF HARDWARE AND SOFTWARE: Introduction to Infineon microcontroller development kit (easy kit), developing
project using KEIL software, downloading embedded software into target system, introduction to on-chip debugging resources
(JTAG), debugging target system using on-chip debugging support (OCDS). (5)

CASE STUDY: Driving of a brushless DC Motor without sensors. (4)

Total L: 45
TEXT BOOKS:
1. Ronald K Jurgen ,“Automotive Electronics Handbook” , McGraw Hill, 2000.
2. Werner Klingenstein & Team, “Semiconductors: Technical Information, Technologies and Characteristic Data”, Publicis
Corporate Publishing, 2004
3. Ljubo Vlacic, Michel Parent & Furnio Harshima, “Intelligent Vehicle Technologies: Theory and Applications”, Butterworth-
Heinemann Publications, 2001.

REFERENCES:
1. Arnold Berger, “Embedded System Design: An Introduction to Processes, Tools, and Techniques” CMP Books, 2001.
2. David E Simon, “An Embedded Software Primer”, Pearson Education, Asia, 2001.
3. Wayne Wolf, “Computers as Components” Morgan Kaufmann Publishers, 2001.

12A031 VIBRATION AND NOISE ENGINEERING

3003
INTRODUCTION: Relevance of and need for vibration analysis. Mathematical modeling of vibrating systems - Discrete and
continuous systems – Single degree of freedom systems, free and forced vibrations, various damping models.Study of cantilever
beam vibration. (6)

TWO AND MULTI DEGREES OF FREEDOM SYSTEMS: Generalized co-ordinates, principal co-ordinates, derivation of equations
of motion, co-ordinate coupling, Lagrange’s equation. Derivation of equations of motion, influence coefficients, orthogonality
principle, calculation of natural frequencies by Raleigh, Stodala, Dunkerley, Holzer and matrix iteration methods, branched system,
geared system. Study of car suspension. (12)

TRANSIENT VIBRATION: Impulse and arbitrary excitation, base excitation, Laplace transform formulation, response spectrum. (7)

VIBRATION MEASUREMENT AND CONTROL: Measurement of vibration, FFT analyzer. Methods of vibration control - Excitation
reduction at source, balancing of rigid, flexible and variable mass rotors. Dynamic properties and selection of structural materials -
Visco-elastic polymers, vibration absorbers - Tuned absorber, tuned and damped absorber (qualitative treatment only), un-tuned
viscous damper, vibration isolation. Engine vibration measurement. (12)

65
NOISE: Properties of sound, sound level meter, sound isolation - Machine enclosures, silencers and mufflers. Car engine, two
wheeler engine noise measurement. (8)

Total L: 45

TEXT BOOKS:
1. W.T, "Theory of Vibration with Applications", CBS Publishers and Distributors, New Delhi, 1990.
2. Ashok Kumar Mallik, “Principles of Vibration control”, Affiliated East-West Press (P) Ltd., New Delhi Press, 1990.
3. Bell, “Industrial Noise Control Fundamentals and Applications”, Marcel Dekkev Incl., New York, 1982.

REFERENCES:
1. Rao S.S, "Mechanical Vibrations", Addison Wesley, Longman, 1995.
2. Tse Morse and Hinkle, “Mechanical Vibration”, Prentice Hall of India Ltd., New Jersey,1987.
3. Grover G.K, "Mechanical Vibrations ", New Chand and Brothers, Roorkey, 1989.
4. Seto, “Mechanical Vibrations ", Schaum Outline Series, McGraw Hill Book Company, New Delhi, 1990.
5. Kewal Pujara, Pujara R.S, “Noise for Engineers”, Dhanpat Rai and Sons, New Delhi, 1984.

12A032 TOTAL QUALITY MANAGEMENT

3003
INTRODUCTION: Definitions of the terms - quality, quality planning, quality control, quality assurance, quality management, Total
Quality Management (TQM) as per ISO 8402 - overview on TQM - The TQM axioms - Commitment - Scientific knowledge -
Involvement - Consequences of total quality. ISO 9000 Series Quality System Standards: The structure of ISO 9000 series quality
system standards - certification process - action plan development for cases. Study of quality audit. (10)

THE DEMING AND JURAN APPROACH TO TQM: Deming's fourteen points on quality management - five DDs - implementing the
Deming philosophy - action plan - the Deming cycle - questions and opinions of Deming. : Developing a habit of quality - Juran
quality trilogy - the universal break through sequence - comparison Juran and Deming approaches. (10)

CROSBY AND THE QUALITY TREATMENT AND KAIZEN: Crosby's diagnosis of a troubled company - Crosby's quality vaccine -
Crosby's absolutes for quality management - Crosby's fourteen steps for quality improvement. Kaizen and innovation - the Kaizen
management practices - total quality control (TQC) - approaches of Faigenbaum, Ishikawa - Kaizen and TQC - Kanban systems -
small group activities - quality control circles - suggestion systems - comparison of Kaizen and Deming's approach. (10)

SUPPORTING TOOLS, ACTIVITIES AND TECHNIQUES IN TQM PROJECTS: Affinity diagram - bar chart - block diagram -
brainstorming - cause and effect analysis - customer-supplier relationship checklist - decision analysis - flow charts - force field
analysis - line graph/run charts - Pareto analysis - quality costing - Quality Function Deployment (QFD) - quality project approach
and the problem solving process. Quality in auto service station. (8)

STRATEGIC QUALITY MANAGEMENT: Integrating quality into strategic management - Quality and the management cycle -
Resources for Quality activities - Training for Quality - Self Managing Teams - Role of the Quality Director - Obstacles to achieving
successful Strategic Quality Management. Five S study. (7)

Total L: 45
TEXT BOOKS:
1. Logothetics N, "Managing for Total Quality - From Deming to Taguchi and SPC", Prentice Hall Ltd, New Delhi, 1997.
2. Juran J M and Gryna, F M, "Quality Planning and Analysis - From Product Development Through Use", Tata McGraw
Hill Publishing Limited, New Delhi, 1995.

REFERENCES:
1. Deming W E, " Out of the Crisis," MIT Press, Cambridge, MA, 1982.
2. Juran J M, Juran on " Leadership for Quality" - An Executive Handbook, The Free Press, New York, 1989.
3. Salor J H, "TQM-FIeld Manual," McGraw Hill, New York, 1992.
4. Crosby P B, " Quality is Free," McGraw Hill, New York, 1979.

12A033 INDUSTRIAL HYDRAULIC AND PNEUMATIC SYSTEMS

3003
ELEMENTS OF HYDRAULIC SYSTEMS: Introduction to fluid power, properties - Hydraulic fluids, air. Selection of hydraulic fluids,
comparison between hydraulics and pneumatics. Pumps, motors and cylinders - Types, characteristics. construction details. Valves
for control of direction, flow and pressure, types, construction details. (9)

HYDRAULIC SYSTEM DESIGN AND INDUSTRIAL APPLICATION: Power pack–elements, design. Pipes- material, pipe fittings.
seals and packing. maintenance of hydraulic systems. Selection criteria for cylinders, valves, pipes. Heat generation in hydraulic
system. Circuits for deceleration, regenerative circuits, differential circuits, feed circuits, sequencing circuits, synchronizing circuits,
fail-safe circuits. Design of hydraulic circuits. (9)

66
ELEMENTS OF PNEUMATIC SYSTEMS: Compressors- types, selection. Symbols of pneumatic elements. Cylinders - types,
typical construction details. Valves – Types, typical construction details. (9)

PNEUMATIC SYSTEMS DESIGN AND INDUSTRIAL APPLICATIONS: General approach, travel step diagram. Types - sequence
control, cascade, step counter method. K.V.Mapping for minimization of logic equation. Metal working, handling, clamping,
application with counters. Design of pneumatic circuits. (9)

ADVANCED TOPICS IN HYDRAULICS AND PNEUMATICS: Electro pneumatics, ladder diagram. Servo and Proportional valves -
types, operation, application. Hydro-Mechanical servo systems. PLC-construction, types, operation, programming. (9)

Total L: 45
TEXT BOOKS:
1. Yeaple F.D, “Hydraulic and Pneumatic Power and Control:Design”, McGraw-Hill, USA, 2007
2. Srinivasan R, “Hydraulic and Pneumatic Controls”, Vijay Nicole Imprints Private Ltd, 2005

REFERENCES:
1. Majumdar, S.R, “Oil Hydraulic Systems: Principles and Maintenance”, Tata McGraw- Hill, New Delhi, 2003.
2. Rohner P, “Fluid Power Logic Circuit Design – Analysis, Design Method and Worked Examples”, Macmillan Press Ltd., UK,
1979.
3. Sudin Izman and Venkatesh V C, “Precision Engineering”, Tata Mcgraw-Hill Inc.New Delhi , 2007.
4. Werner Deppert and Kurt Stoll, “Pneumatic Controls : An Introduction to Principles“, Vogel-Druck Wurzburg, Germany, 1975.
5. Pippenger J.J Tyler G Hicks, “Industrial Hydraulics”, Mcgraw-Hill, USA, 2007

ONE CREDIT COURSES

12AK01 FUEL INJECTION SYSTEM

1001
INTRODUCTION: Definition, need for common rail system (CRS), difference between electronic diesel control unit (EDC) and
mechanically governed fuel injection systems. (5)

AN OVERVIEW ON DIESEL FUEL INJECTION SYSTEM: Types - inline fuel injection pumps, distributor pumps, axial and radial
distribution pumps, single plunger PF pumps, common rail system (CRS). (10)

Total L: 15
TEXT BOOKS:
1. Richard Stone, “Introduction to IC Engines”, Macmilan,1992.
2. Heinz Heisler, “Advanced Engine Technology”, SAE 1995.
3. “Diesel Fuel – Injection System Common – Rail”, Robert Bosch GmBH, 2005.

REFERENCES:
1. John B Heywood, “Internal Combustion Engine Fundamentals”, McGraw Hill International Editions, 1988.
2. “Automotive Electrics Automotive Electronics”, Robert Bosch GmbH, 2004.
3. “Automotive Hand book”, Robert Bosch, 2004.
4. Ganesan V , “Internal Combustion Engines”, Tata McGraw Hill, New Delhi, 2003.
5. Mathur L and Sharma R P, “Internal Combustion Engines”, Dhanpat Rai Publications (P), Ltd, New Delhi, 2002.

12AK02 COMMON RAIL DIRECT INJECTION

1001
DESIGN, CONSTRUCTION AND WORKING OF CR COMPONENTS: Hydraulic circuit, low pressure circuit - Fuel tank, pre filters,
pre supply pumps, electrical and gear pumps, fuel filters and low pressure fuel lines. High pressure circuit - HP pump, common rail,
injectors, nozzles, high pressure fuel lines, pressure control valve, pressure limiting valve. Electronic diesel control unit (EDC) -
System block, sensors, electronic control unit (ECU) and actuators. (9)

COMMON RAIL SYSTEM FUNCTIONS: System, types - Passenger car and commercial vehicle system, field of application,
functions - Basic and auxiliary, injection technology, system functions, injector quantity adjustment (IQA), pressure wave correction
(PWC), zero fuel calibration (ZFC), fuel mean value adaptation (FMA), fuel balance control (FBC). (6)

Total L: 15
TEXT BOOKS:
1. Richard Stone, “Introduction to IC Engines”, Macmilan,1992.
2. Heinz Heisler, “Advanced Engine Technology”, SAE 1995.
3. “Diesel Fuel – Injection System Common – Rail”, Robert Bosch GmBH, 2005.

REFERENCES:
1. John B Heywood, “Internal Combustion Engine Fundamentals”, McGraw Hill International Editions, 1988.
2. “Automotive Electrics Automotive Electronics”, Robert Bosch GmbH, 2004.

67
3. “Automotive Hand book”, Robert Bosch, 2004.
4. Ganesan V , “Internal Combustion Engines”, Tata McGraw Hill, New Delhi, 2003.
5. Mathur L and Sharma R.P, “Internal Combustion Engines”, Dhanpat Rai Publications (P), Ltd, New Delhi, 2002.

12AK03 VEHICLE SYSTEM ENGINEERING

1001

INTEGRATION OF MAJOR ASSEMBLY: Selection of engine, matching of gear box and integration. Suspension system, axle and
steering system and integration with chassis member. (8)

Integration of controls: Clutch, gear box, brakes and steering linkages. (4)

Layout design of vehicle. (3)

Total L: 15
REFERENCES:
1. Garrett T K, Newton K and Steeds W, “Motor Vehicle”, Butter Worths & Co., Publishers Ltd., New Delhi, 2001.
2. Heinz Heister, “Vehicle and Engine Technology”, SAE, 1999.
3. Fenton J, “Hand book of Automotive Power Trains and Chassis Design”, Progressive publisher, 1998.

12AK04 MICROCONTROLLERS AND INTERFACING TECHNIQUES

1001

INTRODUCTION: Introduction to microprocessor, microcontrollers and analysis. (2)

ON-CHIP FEATURES: Program memory, data memory, parallel ports, timers, serial port and interrupt controllers. (4)

HANDS ON EXERCISES: Working with integrated development environment (IDE) - Creating new projects - Adding files to project,
editing, debugging, simulating simple programs and interfacing of basic input / output devices. (4)

APPLICATIONS: Microcontrollers in automotive lighting, body control module, active and passive safety systems. (5)

Total L: 15
REFERENCES:
1. Muhammad Ali Mazidi, Janice Gillispie Mazidi, Rolin D. Mckinlay,”The 8051 Microcontroller and Embedded Systems-Using
Assembly and C” Prentice Hall of India, New Delhi, 2006.

12AK05 COMPUTER AIDED INDUSTRIAL DESIGN FOR AUTOMOBILES

1001

INTRODUCTION: Computer aided industrial design tools, Alias design products, Alias design interface. (5)

AN OVERVIEW ON COMPUTER AIDED INDUSTRIAL DESIGN: Features of curve, Creating curves, Transform tools, Creating a
surface, Projecting curves on surface, Mirroring objects, Stretching a curve, Breaking a curve at inflections, Rebuilding and
planarizing a curve and Advanced surface creation. Data transfer from CAID to CAD. (10)

Total L: 15
TEXT BOOKS:
1. Alan Pipes, “Drawing for Designers”, Laurence King Publishing, 2007
2. Sham Tickoo, “Learning Autodesk Alias Design 2012”, CADCIM Technologies, USA, 2012.

REFERENCES:
1. Tony Lewin, Ryan Borroff, “How to Design Cars Like a Pro”, Motor Books International, 2010.

68
 12AK06 SKETCHING FOR DESIGNERS
1001
INTRODUCTION: Study of geometry of elements in products and its application in object drawing. (3)

SKETCHING: Product presentation in various media like pencil, ink and colour. Presenting thoughts and ideas in design through
sketches, perspective and exploded views. Presentation of product design concepts through simplified graphics presentation.
Typefaces, Typography and printing, Exposure to digital photography. (12)

Total L: 15

TEXT BOOKS:
1. Powell, Dick, “Design Rendering Techniques”, Little Brown Book Group, 2008.
2. Buxton, Bill, “Sketching User Experiences: Getting the Design Right and the Right Design”, Morgan Kaufmann, 2007.

REFERENCES:
1. Caplin Steve, Banks Adam, “The Complete Guide to Digital Illustration”, The Ilex Press, 2003.
2. Erik Olofsson, Klara Sjölén, “Design Sketching”, Keeos Design Books AB, 2005

12AK07 INDUSTRIAL DESIGN

1001
INTRODUCTION TO BASIC ELEMENTS: Line, texture, colour, form, symmetry, balance, scale, mass, unity and variety. Concept of
visual language and visual design. (3)

INDUSTRIAL DESIGN: Introduction to Gestalt laws, composition and figure and ground relationships .Introduction to concept of
negative space. Use of symmetry. Generation of patterns and textures using simple elements. Introduction to typography and fonts.
Use of grids in graphic composition. Colour circle, colour combinations and its dimensions: hue, value and chroma. Colour
meanings in traditions and psychological use of colours. (12)

Total L: 15
TEXT BOOKS:
1. Gail Greet Hannah, “Elements of Design”, Princeton Architectural Press, 2002
2. Itten Johannes, “The Art of Color”, Wiley Publications, 1997.

REFERENCES:
1. Kepes Gyorgy, “Language of Vision”, Dover Publications, 1995.
2. Elam Kimberly, “Geometry of Design: Studies in Proportion and Composition”, Princeton Architectural Press, 2001

12AK08 COMPUTER AIDED AUTOMOBILE STYLING

1001

INTRODUCTION: Surface Continuities, Construction Settings and its Importance, Curves and Construction techniques, Surface and
Surface Modeling techniques, Building Basic volumes. (5)

AN OVERVIEW ON COMPUTER AIDED STYLING: Sketch Modeling Exercise, Full Exterior Modeling Exercise, Full Interior
Modeling Exercise, Working with Industry level Class A Quality, Working with Scan, Patch planning and Modeling. (10)

Total L: 15
TEXT BOOKS:
1. Sham Tickoo, “Learning Autodesk Alias Design 2012”, CADCIM Technologies, USA, 2012.

REFERENCES:
1. Tony Lewin, Ryan Borroff, “How to Design Cars Like a Pro”, Motor Books International, 2010.
2. Alan Pipes, “Drawing for Designers”, Laurence King Publishing, 2007.

69
 12AK09 VEHICLE DESIGN PROCESS
1001
VEHICLE DESIGN PROCESS: Design Definitions and Design Spectrum, Product Attributes – Function and Emotion, Product
configurations and Component relationships, Introduction to Design Research, Product Analysis – Diachronic, Synchronic,
Understanding and Analyzing contexts, parallel situations, future situations, Understanding modularity and modular systems – 3D
lattice and structures, Design of Modular System – abstract design, Process of conception and its documentation. (15)

Total L: 15

TEXT BOOKS:
1. Jones, J.C , “Design methods”, Wiley, London, 1992.
2. Geoff Wardle, Stuart Macey, Ralph Gilles, “H-Point: The Fundamentals of Car Design and Packaging”, Design Studio Press,
2009.

REFERENCES:
1. Andereasen M.M, “Integrated Product Development”, IFS Publications Ltd. 1987.
2. Gorb, Peter, “Living by Design”, Lund Humphries, London 1978.

SCIENCE AND HUMANITIES ELECTIVES

(One elective from each of the following three categories listed below is to be opted)

MATHEMATICS ELECTIVE

12C040 OPTIMIZATION TECHNIQUES

3 1 0 3.5
LINEAR PROGRAMMING: Graphical method for two dimensional problems, central problems of linear programming – Definitions,
simplex algorithm ,phase I and phase II of simplex method. (8+2)

Simplex Multipliers ,dual and primal, dual simplex method ,transportation problem and its solution,assignment problem and its
solution by Hungarian method, Karmakar’s method , statement, conversion of the Linear Programming problem into the required
form, algorithm. (10+3)

NON LINEAR PROGRAMMING (ONE DIMENSIONAL MINIMIZATION: Introduction ,unrestricted search ,exhaustive search,
interval halving method – Fibonacci method. (9+3)

NON LINEAR PROGRAMMING : (UNCONSTRAINED OPTIMIZATION): Introduction ,random search method,uni variate method,
pattern search methods , Hooke and Jeeves method, simplex method, gradient of a function, steepest descent method , conjugate
gradient method. (11+5)

DYNAMIC PROGRAMMING: Introduction, multistage decision processes ,principles of optimality ,computation procedures. (8+2)

Total L: 45 +T:15=60
TEXT BOOKS:
1. Singiresu. S.Rao, “Engineering Optimization Theory and Practice”, New Age International,1996.
2. Hamdy A Taha , “Operations Research – An introduction”, Pearson Education , 2008.

REFERENCES
1. Kambo N.S., “Mathematical Programming Techniques”, Affiliated East – West Press, 1991.
2. Hillier / Lieberman, “Introduction to Operations Research”, Tata McGraw Hill, 2002.
3. Kalyanmoy Deb, “ Optimization for Engineering Design, Algorithms and Examples”, Prentice Hall, 2004.

12C043 LINEAR ALGEBRA AND NUMERICAL ANALYSIS

3 1 0 3.5
VECTOR SPACE: General vector spaces, real vector spaces, Euclidean n-space, subspaces, linear independence, basis and
dimension, row space, column space and null space, eigen values and eigen vectors, diagonalization. (12+3)

ERRORS: Computer arithmetic and errors. (2+1)

SYSTEM OF LINEAR EQUATIONS: Direct methods, Gauss elimination method, Gauss Jordan method, Crout’s method, iterative
methods, Gauss-Jacobi method, Gauss–Seidel method , convergence criteria. (4+1)

70
EIGEN VALUES AND EIGENVECTORS: Power method, Jacobi method. (3+1)

SOLUTONS OF NONLINEAR EQUATIONS:, False position method, Newton’s method, convergence criteria, Bairstow’s method,
Graeffe’s root squaring method. (4+1)

APPROXIMATING FUNCTIONS: Polynomial interpolation for uneven intervals , Lagrange’s interpolation polynomial, Newton’s
general interpolating formula, polynomial interpolation for even intervals, forward differences, backward differences. (5+2)

DIFFERENTIATION AND INTEGRATION: Numerical differentiation using forward and backward difference formulas, numerical
integration, closed Newton-Cotes formulas, trapezoidal and composite trapezoidal rule, simpson’s and composite simpson’s rule,
gaussian quadratures. (5+2)

ORDINARY DIFFERENTIAL EQUATIONS: Numerical methods for IVP, single step methods , Euler method , Runge-Kutta
methods, modified Euler method, midpoint method (corrected Euler), fourth order Runge-Kutta method, predictor corrector
methods- Milne Simpson method, Adams Bashforth moulton Method, solution of second order BVP by finite difference method.
(10+4)

Total L:45+T:15=60
TEXT BOOKS:
1. Howard Anton and Chirs Rorres “ Elementary Linear Algebra” John Wiley & Sons ,2010.
2. Curtis F Gerald and Patrick O Wheatly, “Applied Numerical Analysis”, Pearson Education, 2002.

REFERENCES:
1. David C.lay, “ Linear Algebra and its Applications ” Addison –Wesley ,2009.
2. Gareth Willams, “ Linear Algebra with Applications” Narosa Publishing House, 2009
3. Steven C Chapra and Raymond P Canale, “Numerical Methods for Engineers with Software and Programming Applications”,
Tata McGraw Hill, 2007
4. Rizwan Butt, “Introduction to Numerical Analysis Using Matlab” Infinity Science Press, 2008.

HUMANITIES ELECTIVE

12C071 INDUSTRIAL PSYCHOLOGY, SOCIOLOGY AND GLOBAL ISSUES

2 1 0 2.5
MANAGEMENT: Concept –Importance - Principles of Management – Functions of Management–Skills and Management Levels.
(4+0)

ORGANISATIONAND LEADERSHIP: Various classifications - Leadership styles and Communication in organization. (3+1)

HUMAN RESOURCE MANAGEMENT: Definition – Importance – Functions – Training &development. (4+2)

GLOBALISATION AND ITS IMPACT ON HRM: Work force diversity - Cross cultural Mgt and Multicultural Mgt. (4+2)

INDUSTRIAL PSYCHOLOGY: Objectives – Individual behaviour - Group behaviour-Group Dynamics – Motivation – Perception–
Industrial Fatigue. (3+3)

WORK ETHICS: Professional Values & Ethics – Need – Issues - Challenges. (4+0)

SOCIOLOGY: Definition – Scope – Significance – Society – Community – Institutions – Culture – Socialization – Social systems.
(2+2)

GLOBAL ISSUES: Environmental issues – Natural resources – Pollution. Social issues – National integration – Corruption –
Terrorism – Regionalism – Communalism - Adolescent problems - Causes and consequences. (2+2)

INDIAN CONSTITUTION: Introduction and Evolution of Indian Constitution, – Fundamental Rights and Duties - Centre-State
Relations– Union Government – Powers and Functions. (5+3)

Total L: 30 + T: 15 = 45
TEXT BOOKS:
1. Vikram Bisen & Priya, “Industrial Psychology”, New Age International (P) Ltd., Publishers, 2010.
2. Shankar Rao C. N., “Sociology : Primary Principles Of Sociology”, Sultan Chand & Co., 2006.

REFERENCES:
1. Harold Koontz, Heinz Weihrich and Ramachandra Aryasri, “Principles of Management” - Tata McGraw Hill, New Delhi, 2004.
2. Dezenzo A David and Robbins P Robbins, “Human Resource Management”, John Wiley and Sons, Inc, MA., 2002.

71
3. Murthy C.S.V, “Business Ethics”, Himalaya Publishing House, 2007.
4. Basu D. P, “Introduction to the Constitution of India”, Prentice Hall of India, 2001.

12C072 INDIAN ETHOS AND VALUES

2 1 0 2.5
HUMAN VALUES AND ETHOS: Meaning and Significance of Values – Sources of Individual Values - Value crisis in the
Contemporary Indian Society –Moral and Ethical Values. (3+2)

SOCIAL RESPONSIBILITY AND ETHICS: Concept of Social Responsibility – Need and Importance of Social Responsibility –
Business Ethics. (3+3)

APPLICATION OF VALUES: Relevance of Values in Management – Personal Values and Values at Work place – Values for
Managers. (4+2)

WORK ETHICS: Professional Values & Ethics – Need – Issues – Challenges – Ethical Leadership – Ethical dilemma - Case Study.
(4+2)

ORGANIZATIONAL CULTURE AND ITS CHALLENGES: Elements of strong organization culture – Brooks Perterson’s
classification of culture. (5+0)

SHARED VALUES IN THE ORGANIZATION AND ITS IMPACT: Need to identify and share values – the Value Construct and How
to Promote Shared Values. (6+0)

UNIVERSAL VALUES: Cross Cultural Values - Impact of Culture on Organizations and Managing Workforce Diversity. (3+2)

INTERPERSONAL RELATIONSHIP: Managing emotions – Emotional Intelligence – Building Better interpersonal Relations –
Dealing with Subordinates – Case Study. (2+4)

Total L: 30 + T: 15 = 45

TEXT BOOKS:
1. Tripathi A N, “Human values” – New Age international Pvt. Ltd., New Delhi, 2002
2. Murthy C.S.V, “Business Ethics”, Himalaya Publishing House, 2007.

REFERENCES:
1. Jayshree Suresh, Raghavan B.S., “Professional Ethics”, S. Chand & Company Ltd, New Delhi, 2005.
2. Nandagopal R. and Ajith Sankar RN., “Indian Ethos and Values in Management”, McGraw Hill, New Delhi, 2010.
3. Kiran D. R, “Professional Ethics and Human Values”, Tata McGraw Hill, New Delhi, 2007.
4. Proceedings of National Conference on Integrating Values & Social Concerns With Technical Education, PSG College of
Technology, 2010.

12C073 HUMAN RESOURCE MANAGEMENT

2 1 0 2.5
NATURE AND SCOPE OF HUMAN RESOURCE MANAGEMENT: Meaning and Definition of HRM, Objectives and Functions of
HRM, Models of HRM, HRM in a changing Environment, Human Resource Management in the wake of Globalization. (3+3)

TRAINING AND DEVELOPMENT: Principles of Learning, Objectives, Types and Training Methods, Management Development: Its
Meaning, Scope and Objectives. (4+2)

WAGE AND SALARY ADMINISTRATION: Principles and Techniques of Wage Fixation, Job Evaluation, Incentive Schemes. (5+0)

PERFORMANCE APPRAISAL: Process, Methods, Factors that distort appraisal, Case studies in Methods to Improve Performance,
Role of Performance in the Performance Management Process, Performance Appraisal Vs. Potential Appraisal. (2+4)

MORALE AND MOTIVATION OF EMPLOYEES: Morale-importance of Moral and Motivation Methods of Employees,
Empowerment – Factors Affecting Empowerment – Process – Benefits. (6+0)

WORK ENVIRONMENT AND TERMS AND CONDITIONS OF EMPLOYMENT: Fatigue – Safety – Accident Prevention Accident
Records – Factories Act of 1948 and pollution legislations. (1+3)

INTERNATIONAL HRM: Model, Variables that outline difference between local and International HRM approaches to IHRM, Linking
HRM to International Expansion Strategies. (6+0)

TRENDS IN HR: HR Outsourcing – HRIS – Management of Turnover and retention – Workforce Relationlization – Managing
Separation – Case studies in Trends in Employee Engagement and Retention. (3+3)

Total L: 30 + T: 15 = 45

72
TEXT BOOK:
1. Gary Dessler, “Human Resource Management”, Prentice Hall of India, New Delhi, 2009.
2. VSP Rao, “Human Resources Management Text and Cases”, Excel Books, 2010.

REFERENCES:
1. Dezenzo A David and Robbins P Robbins, “Human Resource Management”, John Wiley and Sons, Inc, MA., 2002.
2. Aswathappa K, “Human Resource and Personnel Management – Text and Cases”, Tata McGraw Hill, 2007.
3. Bernardin H, John, “Human Resource Management – An experiential Approach”, Tata McGraw Hill, 2004.
4. Cascio H, Wayne, “Managing Human Resources – Productivity, Quality of Work Life and Profits, Tata McGraw Hill, 2004.
5. Cynthia D.Fisher, Lyle F. Schoenfeldt and James B.Shaw, Human Resources Management, Biztantra, New Delhi, 2005.

12C074 INDIAN CONSTITUTION AND SOCIETY

2 1 0 2.5
PREAMBLE AND ITS PHILOSOPHY: Introduction and Evolution of Indian Constitution preamble and its Philosophy. (5+0)

CENTRE-STATE RELATIONS: Directive Principles of State Policy, Fundamental Rights and Duties, Centre-State Relations. (2+4)

UNION GOVERNMENT: Powers, Functions and Position of President, Vice-President and Council of Ministers (5+0)

COMPOSITION OF PARLIAMENT: Constitution Amendment Procedure, Financial Legislation in Parliament. Case Study (3+2)

FEDERAL SYSTEM: Features of Federal System, Administrative Relationship between Union and States, Powers, Functions and
Position of Governors, Function of Chief Ministers, Council of Ministers. Composition and powers of the State Legislature. (5+3)

JUDICIARY: The Union Judiciary - Supreme Court and High Court. (4+0)

PUBLIC SERVICES: All India Services, Central Civil Services, State Services, Local Services and Training of Civil Services. (4+2)

INTERNATIONAL POLITICS: Foreign Policy of India, Foreign Policy of USA, International Institutions like UNO, WTO, SAARC and
Environmentalism. (2+4)

Total L: 30 + T: 15 = 45
TEXT BOOKS:
1. Basu D.D., “Introduction to the Constitution of India” - Prentice Hall of India, 2001.
2. Durga Dasbasu, ”Introduction to the Constitution of India”, Lexisnerxis Butterwrths Wathax, Nagpur, 2010.
3. Briji Kishore Sharma, “Introduction to the Constitution of India”, Prentice Hall of India, 2005.

REFERENCES:
1. Pandey J.N., “Constitutional Law of India”, Central Law Agency, 1998.
2. Hoshiar Singh, “Indian Administration”, Kitab Mahal, 2003.
3. “Constitution of India”, Eastern Book Company, 1990.
4. Jain. M. C, “The Constitution of India”, Law House, New Delhi, 2001.
5. Shukla. V.N, “Constitution of India”, 2011.

12C075 ELEMENTS OF SOCIOLOGY AND ENVIRONMENT

2 1 0 2.5
SOCIOLOGY: Definition – Scope – Significance - Society – Community – Association – Institutions – Culture – Socialization – social
systems. (7+0)

FAMILY AND MARRIAGE IN INDIA: Family and Marriage – Meaning - Characteristics – Types – Changing functions – Recent
trends – Impact of westernization and globalization on family and marriage systems in India. (6+0)

SOCIAL ISSUES IN INDIA: Problems of national integration – corruption – terrorism – regionalism – gender discrimination –
communalism – causes and consequences. Adolescent problems - Alcoholism – Drug addiction – juvenile delinquency – crime -
AIDS – Population growth – causes and consequences. (8+0)

SOCIAL CONTROL: Meaning – importance - Types of agencies – Role of education in social control – value education for total well
being – Eternal values – Pollution of mind – respect for all religion – human dignity – respect for parents, teachers and fellow
beings. Human rights – Importance of socialization – role of family, and society in personality development. (4+4)

GLOBAL ISSUES – ENVIRONMENTAL ISSUES: Natural recourses – environmental pollution – air, water, soil, noise and thermal
– need for public awareness – role of individual in prevention of pollution. Climate change – global warming – ozone layer, acid rain,
nuclear accidents and holocaust. Environmental protection Act – Air (prevention & control of pollution) Act - Water Act – Forest
Conservation Act. (2+6)

73
ROLE OF ENGINEERS IN ENVIRONMENTAL PROTECTION: Importance of environment in human health – Hazardous waste and
environmental problems – toxic waste management in India – Nuclear energy and radioactive wastes – Energy from waste – Role of
IT in environment protection and human health – role of engineers in environmental protection. (3+5)

Total L: 30 + T: 15 = 45
TEXT BOOKS:
1. Shankar Rao C.N, “Sociology : Primary Principles Of Sociology”, Sultan Chand & Co., 2006
2. Ram Ahuja, “Social Problems in India”, Rawat Publication, 2010

REFERENCES:
1. Kapadia K.M, “Marriage & Family in India”, Oxford University Press, 1996.
2. Deepankar Roy, “Principles of Sociology”, Indian Publishing House, 2008.
3. Edward Alsworth Ross, “The Principles of Sociology”, Nabu Press, 2010.

12C076 PRINCIPLES OF MANAGEMENT

2 1 0 2.5
PRINCIPLES OF MANAGEMENT: Meaning, Definition and Significance of Management, Basic Functions of Management –
Planning, Organizing, Staffing, Directing and Controlling. (5+0)

ENGINEERS AND ORGANIZATIONAL ENVIRONMENT: Social, Economic, Technological and Political. Social Responsibility of
Engineers. (2+1)

MANAGEMENT CONCEPTS: MBO, Theory Z, Kaizen, Six Sigma, Quality Circles and TQM. (Case Study). (3+2)

BUSINESS PROCESS REENGINEERING: Need for BPR, Various phases of BPR, Production and Productivity in six sigma and
TQM – Factors Influencing Productivity. (4+3)

ORGANISATIONAL BEHAVIOUR: Significance of OB, Role of Leadership, Personality and Motivation, Stress, Attitudes, Values
and Perceptions at work. (7+0)

INDUSTRIAL AND BUSINESS ORGANIZATION: Growth of Industries (Small Scale, Medium Scale and Large Scale Industries).
Forms of Business Organizations. Resource Management – Internal and External Sources. (2+4)

HUMAN RESOURCE MANAGEMENT: Importance, Objectives and Functions, Job Analysis and Recruitment, Selection and
Placement, Training and Development – Case Discussion. (4+2)

WELFARE IN INDUSTRY: Working condition, service facilities, legal legislation – Factories Act, 1948 and Workmen’s
Compensation Act. (3+3)

Total L: 30 + T: 15 = 45
TEXT BOOKS:
1. Harold Koontz, Heinz Weihrich and Ramachandra Aryasri, “Principles of Management”, Tata McGraw Hill, New Delhi, 2004.
2. Mamoria, C.B, “Personnel Management”, Sultan Chand & Sons, New Delhi, 2005.

REFERENCES:
1. Robin Fincham and Peter Rhodes, “ Principles of Organisational Behaviour” Oxford University Press., 2010.
2. Gupta C B, “Management Theory and Practice” Sultan Chand and Sons., New Delhi, 2009.
3. Rao V.S.P, “Management Text and Cases” Excel books, New Delhi, 2009.
4. Fred Luthans, “Organisational Behaviour” Mc-Graw Hill, New York, 2005.
5. Aswathappa K, “Human Resource and Personnel Management – Text and Cases”, Tata McGraw Hill, 2007.
6. Khanna O.P, “Industrial Engineering & Management”, Dhanpat Rai Publications, New Delhi, 2003.
7. Joepeppard, Philip Rowland, “Business Process Reenginerring”, Kogan, 1996.
8. Gary Dessler, “Human Resource Management”, Prentice Hall of India, New Delhi, 2009.

12C077 ENTREPRENURSHIP
2 1 0 2.5
INTRODUCTION TO ENTREPRENEURSHIP: Definition – Characteristics and Functions of an Entrepreneur – Common myths
about entrepreneurs – Importance or Entrepreneurship. Seminar in R5 & R6. (2+2)

CREATIVITY AND INNOVATION: The role of creativity – The innovation Process – Sources of New Ideas – Methods of Generating
Ideas – Creative Problem Solving – Entrepreneurial Process. (3+2)

74
DEVELOPING AN EFFECTIVE BUSINESS MODEL: The Importance of a Business Model – Components of an Effective Business
Model – Case studies in Developing and Writing the Business Plan. (3+2)

APPRAISAL OF PROJECTS: Importance of Evaluating Various options – Case studies in Appraisal Techniques. (4+2)

FORMS OF BUSINESS ORGANIZATION: Sole Proprietorship – Partnership – Limited liability partnership - Joint Stock Companies
and Cooperatives. (3+2)

FINANCING THE NEW VENTURE: Determining Financial Needs – Sources of Financing – Equity and Debt Funding – Case studies
in Evaluating Financial Performance. (4+2)

THE MARKETING FUNCTION: Industry Analysis – Competitor Analysis – Marketing Research for the New Venture – Defining the
Purpose or Objectives – Gathering Data from Secondary Sources – Gathering Information from Primary Sources – Analyzing and
Interpreting the Results – The Marketing Process. (3+2)

MANAGING GROWTH OF NEW VENTURES: Challenges of Growth – Strategies for Firm Growth – Internal and External Growth
Strategies. (6+0)

ETHICAL AND SOCIAL RESPONSIBILITY CHALLENGES FOR ENTREPRENEURS: Ethics, Values and Social Responsibility –
Ethics and Business Decisions. (2+1)

Total L: 30 + T: 15 = 45
TEXT BOOKS:
1. Robert D Hisrich, Michael P Peters & Dean Shepherd, “Entrepreneurship”, Tata McGraw Hill, 2007.
2. Donald F.Kuratko and Richard M.Hodgetts, “Entrepreneurship: A Contemporary Approach”, Dryden Press, Illinois, 2001.

REFERENCES:
1. Thomas W.Zimmerer, Norman M.Scarborough, “Essentials of Entrepreneurship and Small Business Management”, Prentice
Hall of India, 2009.
2. Marc J Dollinger, “Entrepreneurship – Strategies and Resources”, Pearson Education, 2003.
3. Sudha G.S, “Management and Entrepreneurship Development”, Indus Valley Publication, 2009.
4. Mary Coulter, “Entrepreneurship in Action”, Prentice Hall of India, 2006.
5. Successful startups, IIM, Ahmadabad.
6. Successful Entrepreneurs, CII.
7. Vasant Desai, The Dynamics of Entrepreneurial Development and Management, Himalaya Publishing House, 2010.

LANGUAGE ELECTIVE

12C080 PROFESSIONAL ENGLISH

3003
COMMUNICATION SKILLS USING LITERARY TEXTS: Comprehension and critical evaluation of Literary Essays – Focus on
Language Style, Vocabulary, Variety of expression, and emphasis techniques – Review of Short Stories – Critical appreciation of
Poetry. (12)

ESSENTIALS OF PROFESSIONAL COMMUNICATION: Intra & Interpersonal Communication, Interview techniques, Group
Communication, Public speaking and presentation techniques ; Style and writing techniques, email writing, Cross – Cultural
Communication. (10)

FOCUS ON SOFT SKILLS: Etiquette, Body language, telephone conversation, team building. (4)

REPORT WRITING: Format and different types of formal reports, memos, proposals. (5)

PRACTICALS: Presentations & Reviews – Group Discussions – Mock Interviews, Case studies. (14)

Total L:45
TEXT BOOK:
1. Teaching Material prepared by the Faculty, Department of English

REFERENCES:
1. IMS Learning Resources, “Communication Skills Builder”, IMS Publications, Mumbai, 2008.
2. Dorothy E.Z and Lynn Stafford – Yilmaz, “Writers at Work: The Essay”, Cambridge University Press, Cambridge, 2008.
3. Dhanavel, S.P, “English and Soft Skills”, Orient BlackSwan, Hyderabad, 2010.
4. Murphy, Herta A, Hildelrandt, Herbert W and Thomas, Jane P, “Effective Business Communication”, Tata Mc-Graw Hill
Publishing Company Ltd., New Delhi, 2008.
5. Rizvi, M.Ashraf, “Effective Technical Communication”, Tata Mc-Graw Hill Publishing Company Ltd., New Delhi, 2005.

75
6. Sharma, C.M. Ed., “Twelve Short Stories: An Anthology of Short Stories”, Oxford University Press, New Delhi, 2001.
7. Amitav Ghosh, “River of Smoke”, Penguin India, New Delhi, 2011.
8. David Mitchell, “Cloud Atlas”, Random House Publications, United States, 2009.
9. Priyadarshi Patnaik, “Group Discussion and Interview Skills”, Indian Institute of Technology, Kharagpur, 2011.

12C081 BASIC GERMAN

3003
INTRODUCTION: German Culture, Tradition, Universities and Companies , Alphabets, Greetings, Vocabulary. (3)

GRAMMAR: Pronouns, Verbs (sein) and their conjugations, Articles, Question words, Statements and Questions,Negation,Countries,
nationalities and Languages. Simple dialogues, Exercises. (7)

USAGE OF NOUNS & ADJECTIVES: Singular & Plural, Possessive Pronouns, Family, Professions, Number system, A short
text and dialogues related to family - Exercises. (8)

IRREGULAR VERBS: Subject – Verb agreement (with regular & irregular Verbs), Accusative and dative declensions of pronouns
and articles. Modal verbs and their related grammatical structure. (4)

SYNTAX: Word order and sentence formation, Usage of nicht/klein. Dialogues and usage of modal verbs. Exercises. (4)

TIME: Formal & informal expressions. Usage of adverbs, daily routines, related verbs and question words. Related vocabulary and
grammar. Sample dialogues and exercises. (8)

Invitations and telephone conversations. (2)

PRACTICALS: Listening, Speaking, Reading and Writing. (9)

Total L: 45
TEXT BOOK:
1. Course material prepared by the Faculty, Dept. of English.

REFERENCES:
1. Tangram Aktuell 1 (Deutsch als Fremdsprache) - Rosa-Maria Dallapiazza, Eduard von Jan, Til Schönherr - Max Hueber
Verlag (2004).
2. Grundkurs Deutsch - Roland Schäpers, Renate Luscher , Manfred Glück (1980).
3. Lernziel Deutsch - Wolfgang Hieber - Max Hueber Verlag (1983).
4. Studio d A1 – Hermann Funk, Christina Kuhn, Silke Demme. Goyal Publishers & Distributors Pvt. Ltd (2009).

12C082 BASIC FRENCH

3003
INTRODUCTION: (2)

UNITÉ-1: Faire connaissance – inviter et répondre à une invitation – décrire les personnes- articles définis et indéfinis – genre
etnombre des noms et des adjectifs- interrogation et négation – conjugaison du présent. Paris monuments et lieux publics – la vie
de quatre parisiens de professions différentes. (11)

UNITÉ-2: Exprimer l’ ordre et l’obligation demander et commander – evaluer et apprécier- féliciter et remercier – articles partitifs -
adjectifs démonstratifs et possessifs prépositions et adverbes de quantité et de l’imperatif verbes pronominaux – une région
deFrance la Bourgogne – vie quotidienne à la compagne. (11)

UNITÉ-3: Raconter et rapporter – donner son avis – se plaindre et réprimander – expliquer et justifier – pronoms compléments –
futur proche – passé composé et imparfait. Plusieurs régions de France – différents univers sociaux. (11)

UNITÉ-4: Demander l’autorisation – interdire – formuler des projects – discuter et débattre. Pronoms < en > et < y > – pronoms
relatifs et superlatifs – conjugaison du futur – présent continu et passé récent.La vie administrative et régionale – problems
economiques et écologiques – traditions et modernité. (10)

Total L: 45
TEXT BOOKS:
1. Le Nouveau Sans Frontières – Philippe Dominique , Jacky Girardet
2. Michèle Verdelhan , Michel Verdelhan

REFERENCES:

76
1. Dondo Modern French Course ---Mathurin Dondo
2. Modern French Grammar---Margaret Lang and Isabelle Perez.

12C083 BASIC JAPANESE

3003
Orientation Session, Geographic & Socio, economic perspective to Japan, Japanese people and culture and Basic greetings and
responses. (2)

Basic script, Method of writing hiragana and katakana, and Combination sounds and simple words. (2)

Topic marker “wa”, Desu / dewa arimasen cupolas, Interrogative particle “ka”, Grammar particles “mo”, “no”, ‘’Introducing some
one: “Kochira wa ~“ and Self introductions: Hajimemashite”. (2)

Demonstratives “Kore”, “Sore”, “Are”, Demonstrative “Kono”, “Sono”, “Ano” , Possessive noun particle “no” and Japanese
apartments: Greeting your neighbor. (2)

Place marakers “Koko”, “Soko”, “Asoko”, Direction markers “Kochira”, “Sochira”, “Achira” and Japanese department stores: Asking
for and buying something. (2)

Asking for and telling the time, Paticle “ni (at)” for time, kara (from) ~ made (until), Particle “to (and)”, Time periods: Days of the
week, months, time of day, Verbs (Present / future and past tense) and Telephone enquiry: Asking for a phone no. And business
hours. (2)

Destination particle “e”, Particles “de (mode of transportation)” and “to (with) and Japanese train station: Asking for Fare and track
no. / types of trains. (2)

Direct object particle “o”, Particle “de (place of action)” , Verbs (“~masen ka”, “~mashou”) and “Ohanami” Cherry blossom viewing.
(2)

Particle “de (by means of)” , Particle “ni (to)”, ,Aaemasu (give) and Moraimasu (receive) and Visiting a Japanese house. (2)

Adjectives (“i” and “na” type), Adjectives (Positive and negative useage), Particle “ga (however, but), “Dore which?)” and Leaving a
room, thanking some one for hospitality. (2)

Likes and dislikes, Potential verbs (wakarimasu and dekimasu), “Kara ( ~ because)”, Adverbs and Asking some one out over the
phone. (2)

Verbs denoting presence: “Imasu” and “arimasu”, Particle “ni (in)”, “Dare (who?)” , Adverbs (“Chikaku ni ~“), Particle “dare mo
(negative ~ no one)” , Dare ka (anyone), dare ga (who) , Nani ka (anything) , nani ga (what) - ~ya (and) ~ nado (etc.) and Asking
for directions. (2)

Counters and Counting suffixes. (2)

Introduction to Adjectives (na and ii type), Different usages of adjectives, Comparison, Likes and dislikes and Going to a trip. (2)

Need and desire (ga hoshii), Wanting to … (Tabeti desu), Going for a certain purpose (mi –ni ikimasu) and Choosing from a menu

Verb groups, I, II and III and Exercises to group verbs. (2)

Please do (te kudasai), Present continuous tenses (te imasu), Shall I? ( ~ mashou ka) and Describing a natural phenomenon (It is
raining). (2)

To grant permission (~te mo ii desu), Asking for permission ( ~ te mo ii desu ka) and Should not do ( ~ te wa ikemasen). (3)

Describing a continuing state and Describing a habitual action. (3)

Roleplays in Japanese. (3)

A demonstration on usage of chopsticks and Japanese tea party. (2)

Total L: 45
TEXT BOOK:
1. Minna no nohongo – Romaji ban (first 10 lessons of this book)

REFERENCE:

77
1. Minna no Nihongo I Honsatsu Roma – ji ban (Main Textbook Romanized Version). International publisher – 3A Corporation,
Tokyo, Indian distributor – Goyal Publishers & Distributors, New Delhi.

OTHER DEPARTMENT ELECTIVES**

COMPUTER SCIENCE ELECTIVE

12C090 DATABASE MANAGEMENT SYSTEMS

3003
BASIC CONCEPTS: Introduction to databases – Conventional file Processing – Data Modeling for a database – Three level
architecture – Data Independence – Components of a Database Management System (DBMS) – Advantages and disadvantages of
a DBMS – System Environment – users of DBMS. (6)

DATA MODELS: Introduction – Data Associations – entities, attributes, relationships – Entity relationship data models (ERD) –
Generalization – Aggregation – Conversion of ERD into tables – applications – Introduction to Network data model and Hierarchical
data model. (7)

FILE ORGANIZATION: Storage device Characteristics – constituents of a file – Operations on file - Serial files – Sequential files –
Index Sequential files – Direct files – Binary and Secondary key retrieval – Indexing using Tree structures. (6)

RELATIONAL MODEL: Introduction – Relational databases – Relational Algebra – Relational algebra queries. (5)

RELATIONAL DATABASE MANIPULATION: Structured Query Language (SQL) - Basic data retrieval – Condition specification -
SQL Join – views and update, Query Processing. (6)

DATA BASE DESIGN THEORY: Functional dependencies – axioms – Normal forms based on primary keys – Second Normal form
Third Normal form, Boyce – Codd Normal form – examples. Multivalued dependencies – Fourth Normal form – Data base design
process – Database Tuning. (7)

DATABASE SECURITY, INTEGRITY AND CONTROL: Security and Integrity threats – Access Controls and measures, Defense
mechanisms-Transaction management, and concurrency control mechanisms. (4)

ADVANCED DATABASE SYSTEM: Introduction to distributed database, parallel database, spatial database and mobile database.
(4)
Total L:45
TEST BOOK:
1. Elmasri R and Navathe S.B, “Fundamentals of Database Systems”, Pearson Education, 2009.

REFERENCES:
1. Bipin C.Desai, “An Introduction to Database System ‘’, Galgotia Publisher, 2004.
2. Silberschatz A., Korth H and Sudarshan S., “Database System Concepts”, McGraw Hill Inc., 2010.
3. Raghu Ramakrishnan and Johannes Gehrke, “Database Management System”, McGraw Hill Inc., 2009.

12C091 ENTERPRISE COMPUTING

3003
Distributed Computing: Basis of distributed computing – decomposition approaches – layers vs. tiers – basis of client/server
computing – components – client/server computing approaches – application development – advantages, disadvantages and
obstacles of client/server technology – multitier computing overview – benefits – disadvantages – tier separations and interaction.
Enterprise Foundations: Enterprise Architectural overview - object oriented software development for enterprise - Component
Based software development for enterprise. Java Enterprise System. (4)

Enterprise Data Enabling: Enterprise Data - Basis of JDBC - interfaces –drivers - Advanced JDBC features. (5)

Enterprise Web and Communications Enabling: Distributed Enterprise Communications Basis - RMI Communication - Web
Browsers and Web Servers in Enterprise. Web Programming – XML - Java Servlets - Java Server pages. (6)

Multitier Enterprise Computing: EJB – Session stateless and stateful beans – message driven beans – entities - Tools for
Enterprise Computing - Patterns – Framework. (8)

Services for Distributed Enterprise Systems: Naming Services, Directory and Trading services, Activation Services, Message
Services, Transaction Services, Security Services and High assurance Enterprise applications. (8)

78
Enterprise Interoperability: Enterprise Application Integration, Interoperability between various computing technologies – RMI-
IIOP – CORBA. (6)

Total L: 45
TEXT BOOK:
1. Paul J Perrone, Venkata S R Krishna R and Chayanti, "Building Java Enterprise Systems with J2EE", Techmedia, 2000.

REFERENCE:
1. Jeri Edwards, “ 3-Tier Client/Server at Work”, John Wiley and Sons, 1999.
2. Karen Watterson, “Client / Server Technology for Managers” Addison-Wesley, 1996.
3. Dustin R Callaway, "Inside Servlets" - Addison Wesley, 2001.
4. Jason Hunter, "Java Servlet Programming", O’ Reily & Associates Inc., 2001.
5. George Reese, "Database programming, with JDBC and Java”, O'Reily, 2000.
6. Rima Patel Sriganesh, Gerald Brose and Micah Silverman - John Wiley & Sons - 2006.
7. Bill Burke and Richard Monson Haefel, "Enterprise Java Beans 3.0" O'Reily, 2006.

12C092 C++ AND DATA STRUCTURES

3 0 0 3
PRINCIPLES OF OBJECT ORIENTED PROGRAMMING: Software Crisis - Software Evolution - Procedure Oriented Programming,
Object Oriented Programming paradigm - Basic concepts and benefits of OOP - Object Oriented Language - Application of OOP -
Structure of C++ - Applications of C++ - Tokens, Expressions and Control Structures - Operators in C++ - Manipulators.
(4+2)

FUNCTIONS IN C++: Function Prototyping - Call by Reference - Return by reference - Inline functions - Default, Const Arguments -
Function Overloading - Friend and Virtual Functions - Classes and Objects - Member functions - Nesting of Member functions -
Private member functions - Memory allocation for Objects - Static data members - Static Member Functions - Arrays of Objects -
Objects as Function Arguments - Friend Functions - Returning Objects - Const Member functions - Pointers to Members. (8+5)

CONSTRUCTORS: Parameterized Constructors - Multiple Constructors in a Class - Constructors with Default Arguments - Dynamic
Initialization of Objects - Copy and Dynamic Constructors - Destructors overloading - Overloading Unary and Binary Operators -
Overloading Binary Operators using Friend functions. (5+3)

INHERITANCE: Defining Derived Classes - Single Inheritance - Making a Private Member Inheritable - Multiple Inheritance -
Hierarchical Inheritance – Hybrid Inheritance - Virtual Base Classes - Abstract Classes - Constructors in Derived Classes - Member
Classes - Nesting of Classes. (5+3)

DATA STRUCTURES: Abstract data Types - Primitive data structures - Analysis of algorithms - Best, worst and average case time
complexities - Notation. (3+2)

ARRAYS: Operations - Implementation of one, two, three and multi dimensioned arrays - Sparse and dense matrices -
Applications. (3+2)

STACKS: Primitive operations - Sequential implementation - Applications: Subroutine handling, Recursion. (4+3)

QUEUES: Primitive operations - Sequential implementation - Dequeues - Applications: Image component labeling, Machine shop
simulation. (4+3)

LISTS: Primitive Operations - Singly linked lists, Doubly linked lists, Circular lists – Applications: Addition of Polynomials, Sparse
Matrix representation and Operations - Linked Stacks - Linked queues. (6+5)

SORTING: Insertion sort - Selection sort - Bubble sort - Radix sort - Algorithms and their time complexities. (3+2)

Total T 45+ P 30 = 75
TEXT BOOKS:
1. Bjarne Stroustrup, “The C++ Programming Language”, Pearson Education, New Delhi, 2012.
2. Stanley B Lippman, Josee Lajoie and Barbara E Moo, “The C++ Primer”, Pearson Education, New Delhi, 2009.
3. Aaron M Tanenbaum, Moshe J Augenstein and Yedidyah Langsam, "Data structures using C and C++",
Pearson Education, New Delhi, 2009.
4. Sahni Sartaj, "Data Structures, Algorithms and Applications in C++", Universities Press, Hyderabad, 2005.

REFERENCES:
1. Harvey M Deitel,and Paul J Deitel, “C++ How to Program”, Prentice Hall, New Delhi, 2008.
2. Herbert Schildt, “C++ - The Complete Reference", Tata McGraw Hill, New Delhi, 2012.

79
3. Nell Dale, “C++ Plus Data Structures”, Jones & Bartlett, Massachusetts, 2011.
4. Mark Allen Weiss, “Data Structures and Algorithm Analysis in C”, Pearson Education, New Delhi, 2007.
5. Robert L Kruse, Bruce P Leung and Clovin L Tondo, “Data Structures and Program Design in C”,
Pearson Education, New Delhi, 2009.

MANAGEMENT ELECTIVES
(To be offered by the PSG Institute of Management)

12C095 FINANCIAL AND MANAGERIAL ACCOUNTING

3003

Introduction. (3)
Financial Statements. (3)
Transactional Analysis. (3)
Current Assets. (3)
Property, Plant & Equipment. (3)
Liabilities. (3)
Owner’s Equity. (3)
Income Statement. (3)
Statement of Cash Flows. (3)
Fundamental Interpretations of Financial Statements. (3)
Financial Statement Analysis. (3)
Managerial Accounting. (3)
CVP Analysis. (4)
Budgets & Performance. (3)
Segments & Flexible Budget. (3)

Total L: 45
TEXT BOOK:
1. Marshall and McManus, “Accounting: What the Numbers Mean”, shrink-wrapped with the student supplement: Study Outlines,
Solutions to odd-numbered problems and Ready-Notes, 5th Edition, Irwin-McGraw Hill Publishers.

REFERENCE:
1. http://highered.mcgraw-hill.com/sites/0072379006.

12C096 MANAGERIAL FINANCE

3003
Overview; Managerial Finance, Taxes. (5)
Financial Statements and Analysis. (5)
Cash Flow and Financial Planning. (5)
Working Capital & Current Asset Management. (5)
Current Liabilities Management. (5)
Time Value of Money. (5)
Capital Budgeting & Cash Flows. (5)
Risk & Return. (5)
Interest Rates. (5)

Total L: 45

TEXT BOOK:
1. Gitman and Lawrence J, “Principals of Managerial Finance-Brief”, 3rd Edition, Addition Wesley, Longman, Inc 2003

REFERENCE:
1. http://finance.utoledo.edu/tutors.htm

80
 12C097 APPLIED BUSINESS STATISTICS
3003

Statistics, Data and Statistical thinking. (4)

Describing Sets of Data. (4)
Basic Probability Concepts. (4)
Discrete Random Variables. (3)
Continuous Random Variables. (3)
Sampling Distributions. (3)
Estimation with Confidence Interval, Single Sample. (3)
Hypothesis Testing, Single Sample. (3)
Inferences Based on Two Samples. (3)
Simple Linear Regression. (3)
Multiple Linear Regression. (4)
Analysis of Variance. (4)
Categorical Data Analysis. (4)

Total L: 45
TEXT BOOK:
1. McClave, Benson and Sincich, “Statistics for Business and Economics”, 9 th Edition, Prentice Hall, 2004

12C098 MARKETING SYSTEMS

3003

Introduction and Overview. (3)

Marketing: managing Profitable Customer Relationships. (3)
Company and Marketing Strategy. (3)
Marketing in the Digital Age. (2)
The Marketing Environment. (2)
Managing Marketing Information. (2)
Consumer Markets and Buyer Behaviour. (2)
Business Markets and Business Behaviour. (2)
Segmentation. (2)
Products, Services and Branding. (2)
New Product Development. (2)
Pricing Considerations. (2)
Pricing Strategies. (2)
Marketing Channels. (2)
Integrated Marketing Communications. (2)
Advertising, Public Relations. (3)
Personal Sellin. (3)
The Global Marketplace. (3)
Forecasting. (3)

Total L: 45

TEXT BOOK:
1. Kotler and Armstrong, “Principles of Marketing”, 10th Edition, Upper Saddle NJ: Prentice Hall

81
 12C099 ANALYSIS OF MANUFACTURING AND SERVICE SYSTEMS
3003

Operations As a competitive weapon 3. (3)

Operations Strategy. (3)
Project Management. (3)
Managing Processes. (3)
Process Analysis. (3)
Process Performance and Quality. (3)
Constraint Management. (3)
Process Layout. (3)
Lean System. (3)
Supply Chain Strategy. (3)
Location. (3)
Inventory Management. (3)
Sales and Operations Planning. (3)
Resource Planning. (3)
Scheduling. (3)

Total L: 45
TEXT BOOK:
1. Lee J Krajewsi, Larry P Ritzman and Majon K Malhotra, “Operations Management – Processes and Value Chains”, 8th Edition,
PHI Learning P.Ltd., New Delhi, 2008

HUMANITIES ONE CREDIT COURSES

12OK01 PERSONALITY DEVELOPMENT – “A CAREER COPING STRATEGY”

1001
KNOWING ONESELF: Explore habits, attitudes, preferences and experience and tune them to suit the organizations, Become
aware of strengths and weaknesses, talents and problems, emotions and ideas, Know your ambitions, goals and values, IQ,EQ &
SQ. (5)

SELF MANAGEMENT: Time management, Ability to Socialize. (2)

INTEGRATED PERSONALITY DEVELOPMENT: Recognizing the growth of different dimensions of one’s personality such as,
Physical, Intellectual, Emotional, Moral, Social and Spiritual. (4)

PERSONAL COMPETENCES: Developing rapport, Listening skills, Developing tem spirit, Assertiveness and negotiation skills,
Leadership Skills, Giving and receiving constructive Criticism, Positive thinking and creative thinking, Interview techniques and
grooming. (4)

Total: 15
REFERENCES:
1. RajivK Mishra, “Personality Development”, Rupa & Co., 2008.
2. Selvam S. K. P., “Personality Development”, Aph Publishing Corporation, 2010.
3. Materials provided by Guest Speakers.

12OK02 STOCK MARKET OPERATIONS AND ON-LINE TRADING

1001
FINANCIAL MARKETS: Types of investments, Characteristics of investments. (5)

STOCK EXCHANGES IN INDIA: BSE & NSE Trading, Computation of Index. (2)

DERIVATIVES: Call and Put Options Futures and Forward Contracts, Swaps. (3)

82
DEMAT ACCOUNT AND TRADING ACCOUNT ON-LINE TRADING: Order placing, Cancellation of order, Speculation. (5)
Total:15
REFERENCES:
1. Bhalla, “Investment Management”, Sultan Chand Books in India, 2008.
2. MachuRaju, “Indian Financial Market”, Vikas Publishing House, 2nd Edition, 2002.
3. Panday I. M., “Financial Management”, Vikas Publishing House, 9th Edition, 2007.

12OK03 FINANCIAL ACCOUNTING AND COST ACCOUNTING FOR ENGINEERS

1001

INTRODUCTION OF ACCOUNTING: Branches of Accounting – Types of Accounting Concepts and Conventions – Subsidiary
Books. (3)

TRADING, PROFIT & LOSS ACCOUNT: Balance Sheet. (3)

COST ACCOUNTING: Concepts – Objectives – Methods of Costing. Cost Sheet – Elements of Cost – Cost Concepts –
Classification – Cost Sheet. (3)

JOB ORDER COSTING: Features Objectives – Procedure – Job Cost Sheet. Activity Based Costing – Methodology - Applications.
(3) CURRENT TRENDS IN ACCOUNTING: Annual Reports – Skill Application. (3)
Total: 15
REFERENCES:
1. Grewal T.S., “Double Entry Book-Keeping”, Sultan Chand & Sons, 5th Edition.
2. Shukla, “Principles of Accounting”, Sultan Chand & Sons, New Delhi, 2005.
3. Gaur & Narang, “Cost Accounting”, Kalyani Publishing Co., Ltd., New Delhi, 2011.

12OK04 VALUES AND ETHICS AT WORK PLACE

1001

HUMAN VALUES AND ETHOS: Meaning and Significance of Values – Sources of Individual Values - Value crisis in the
Contemporary Indian Society –Moral and Ethical Values. (4)

APPLICATION OF VALUES: Relevance of Values in Management – Personal Values and Values at Work place – Values for
Managers. (2)

WORK ETHICS: Professional Values & Ethics – Need – Issues – Challenges – Ethical Leadership – Ethical dilemma - Case Study.
(4)

SHARED VALUES IN THE ORGANIZATION AND ITS IMPACT: Need to identify and share values – the Value Construct and How
to Promote Shared Values. (2)

UNIVERSAL VALUES: Cross Cultural Values - Impact of Culture on Organizations and Managing Workforce Diversity. (3)
Total : 15
REFERENCES:
1 Tripathi A. N., “Human values” – New Age international Pvt. Ltd., New Delhi, 2002.
2 Murthy C.S.V., “Business Ethics”, Himalaya Publishing House, 2007.
3 Jayshree Suresh, Raghavan B.S., “Professional Ethics”, S. Chand & Company Ltd., New Delhi, 2005.
4 Nandagopal R. and Ajith Sankar RN., “Indian Ethos and Values in Management”, McGraw Hill, New Delhi, 2010.
5 Kiran D. R., “Professional Ethics and Human Values”, Tata McGraw Hill, New Delhi, 2007.
6 Proceedings of National Conference on Integrating values & Social Concerns with Technical Education, PSG College of
Technology, 2010.

12OK05 INSURANCE & RISK MANAGEMENT

1001

INTRODUCTION TO RISK MANAGEMENT: Risk in Our Society. (3)

INSURANCE AND RISK: Client Side – Components of the Costs of Risk. (3)
PRINCIPLES OF INSURANCE: Insurance Company Operations – Documents. (3)

83
MASS CONTROL: Insurance Intermediaries – Insurance Companies and their Role in Deducting Business / Role Risks. (3)
FINANCIAL RISKS: Shift of Risks – Risk Derivatives. (3)
Total: 15
REFERENCES:
1. George E Rejda, “Principles of Risk Management & Insurance”, 11th Ed., 2010.
2. John Hull, “Risk Management & Financial Institution”, 2012.
3. Alka Mittal & S. L. Gupta, “Principles of Insurance & Risk Management”, 2006.

12OK06 EXPORT - IMPORT MANAGEMENT

1001

INTRODUCTION: Export – Import Business – Preliminaries for starting Export – Import Business – Registration. (3)

EXPORT PROCEDURES: Obtaining an Export Licence – Export Credit Insurance – Procedures and Documentation. (3)

FOREIGN EXCHANGE: Finance for Exports – Pricing - Understanding Foreign Exchange Rates. (3)

IMPORT PROCEDURES: Import Policy – Licence - Procedure and Documentation. (3)

EXPORT INCENTIVES: Incentives – Institutional Support. (3)

Total:15
REFERENCES:
1. C. Ramagopal, “Export Import Procedures - Documentation and Logistics”, New Age International.
2. “Inco terms Export Costing and Pricing with Case Studies Case Law and Exercises”, Paras Ram Anupam Publications, Edt. 23,
Rs 495.
3. Cherian and Parab, “Export Marketing”, Himalaya Publishing House, New Delhi, 2008.
4. Rathod, Rathor and Jani, “International Marketing”, Himalaya Publishing House, NewDelhi, 2008.
5. “Government of India: Export-Import Policy, procedures, etc.”, (Volumes I, II and III) NewDelhi.
6. “Government of India: Handbook of Procedures, Import and Export Promotion”, New Delhi.
7. Duty Drawback, “(with New Drawback Rates w.e.f. 1st October, 2011)”, Nabhi’s Board of Editors, 49th edition, October 2011,
Rs.670.
8. “Duty Entitlement Pass Book Scheme (DEPB)”, Nabhi’s Board of Editors, 24th, September 2010, Rs.340.
9. “EXPORTERS Manual and Documentation with Free Complimentary book How to Export (OUT OF PRINT)”, Nabhi’s Board of
Editors, 2009, Rs.695.
10. “How to Export 2012”, Nabhi’s Board of Editors, 19th Edition, August 2012, Rs 240.
11. “How to Import 2012”, Nabhi’s Board of Editors, 18th Edition, August 2012, Rs.190.
12. M I Mahajan, “Import Policy procedures and Documentation 2012-13”, Edt. 7, Jain Book Publishers, Rs 650.

12OK07 CORPORATE COMMUNICATION

1001
INTRODUCTION: Basics of Corporate Culture, Etiquette, Code governing manners and conduct, Personal Grooming, People
relationship, Worthy goals/ideals. (3)

CORPORATE COMMUNICATION (ORAL): Communicating in Organizational Settings, Recognizing effective Communication,

Mastering Listening and Nonverbal Communication Skills, Overcoming Barriers to Communication, Communicating in Teams and
Cross, Culturally and Fine, Tuning Corporate Communication Skills. (4)

WRITTEN COMMUNICATION: Planning, Writing, and completing business messages, Writing messages for Electronic Media,
Creating effective E-mail messages, Writing routine and positive and negative messages, Writing persuasive messages, Guidelines
for writing Reports and proposals/Format and layout of Business Documents. (5)

PRESENTATION AND NEGOTIATION SKILLS. (3)

Total: 15
REFERENCES:
1. Herta A. Murphy, Hebert W. Hildebrandt, and Jane P. Thomas, “Effective Business Communication”, McGraw – Hill,
VII Edition, New Delhi, 2008.
2. Courtland L. Bove’e, John V. Thill, and Mukesh Chaturvedi, “Business Communication Today”, Dorling Kindersley India (Pvt).
Ltd., 2009.

84
 12OK08 INTERPERSONAL SKILLS
1001
INTRODUCTION: Process of Communication, Types of Communication, Barriers to Communication, Case studies. (2)
ORAL COMMUNICATION: Communication in the work place. (1)
Conversational Skills. (1)
Presentation Skills (1)
Interview Techniques (2)
Team Management Skills (1)
Spoken English (2)
Personality Development (2)
Practicals (3)
Total:15

REFERENCES:
1. Kitty O Locker and Stephen Kyo Kaczmarek, “Business Communication”, McGraw – Hill, III Edition, New York, 2008.
2. Ashraf Rizvi M., “Effective Technical Communication”, McGraw – Hill, New York, 2005.
3. Sasikumar V., Kiranmai Dutt P. , and Geetha Rajeevan, “Oral Communication Skills”, Cambridge University Press India Pvt.
Ltd., New Delhi, 2009.

12OK09 SOFT SKILLS

1001
SOFT SKILLS: Importance and types of soft skills, Hand skills Vs soft skills in the world of work. (2)

INTERPERSONAL SKILLS: Significance, Interpersonal Skills for Team building, Making small Talks. (1.5)

EMAIL ETIQUETTE: Do’s and Don’ts of Email drafting. (3)

NEGOTIATION SKILLS: The need and Significance of negotiation Skills in work contexts. (2)

CROSS CULTURAL COMMUNICATION: The need for Cross Cultural Communication in the global context, Understanding Cross
Cultural Communication. (1.5)

CORPORATE COMMUNICATION: The Essence of Corporate Communication, Conversations in Transactional Situations,

Discussions/Meetings/Team Skills, Social Grace, Attitude Building. (5)
Total: 15
REFERENCES:
1. E.H. McGrath, S.J. “Basic Managerial Skills for All” Prentice – Hall of India Private Limited, New Delhi , 2008.
2. Kumar E. Suresh. “Communication Skills & Soft Skills : An Integrated Approach”. Pearson Education India, 2011.
3. Herta A. Murphy, Hebert W. Hildebrand t, and Jane P. Thomas, “Effective Business Communication”, McGraw – Hill,
VII Edition, New Delhi, 2008.
4. Courtland L. Bove’e, John V. Thill, and Mukesh Chaturvedi, “Business Communication Today”, Dorling Kindersley India (Pvt).
Ltd., 2009.

12OK10 TECHNICAL WRITING

1001

INTRODUCTION: Fundamentals of Technical Writing, Using multifarious resources, Collecting and Organizing information,
Understanding Audience/Readers, Analyzing Source credibility. (4)

TECHNICAL WRITING: Use of Language, Punctuation and Mechanics, Pre-writing Techniques, Documentation, Manipulating
Written material, Proof reading, Paraphrasing and Summarizing. (4)

REPORT WRITING: Types of Reports, Creating an outline for Project Reports, Drafting information verbally and visually, Handling
Presentation Tools, MS Word/MS Power Point, Using the library and the Internet, Quoting Bibliographical references, Plagiarism.
(5)

PRACTICAL: Spotting the Error, Rewriting a given document, Producing Oral Reports. (2)

Total : 15

REFERENCES:
1. Blake, Gary & Robert W. Bly. The Elements of Technical Writing: The essential guide to writing. NY: MacMillan, 1993. ISBN:
0-02-013085-6
2. Society for Technical Communication. Technical Communication 38, 4(1991). Special Issue: Collaborative Writing.
3. Tichy, Henrietta J. Effective Writing For Engineers, Managers, Scientists. New York: John Wiley, 1988.

85
4. Strunk, William, Jr., and White, E. B. The Elements of Style. New York: Macmillan, 1979.

12OK11 MEASUREMENTS FOR SCIENCE AND ENGINEERING WITH OPEN SOURCE TOOLS
1001
BLOCK DIAGRAM OF THE EXPEYES PLATFORM AND ITS FUNCTIONAL DESCRIPTION: Fundamental building blocks of the
ExpEYES user library in C and Python. ExpEYES Graphical User interface. Using the input and output terminals. Voltage current
ratings and timing. Measuring voltage and current . Voltage and current sources. Studying waveforms- amplitude, frequency and
time measurement. FFT analyser. (7)

PYTHON PROGRAMMING BASICS: Introduction to the MinGW IDE. Experiment development using Python or C. Temperature
measurement using PT100 and LM35. Oscillatory motion. Cooling curves. Magnetic induction. Capacitor charge and discharge.
LCR circuits. Optical measurements-light sensor for timing signals. Electrical conductivity of electrolytes . Ultrasonic sensors. (8)

Total = L: 15 = 15
REFERENCES:
1. Ajith kumar BP, ExpEYES User Manual , IUAC publications New Delhi, 2012
2. Ajith kumar BP , ExpEYES Junior User manual, IUAC publications New Delhi, 2012
3. Ajith kumar BP, ExpEYES Programmers manual, IUAC publications, New Delhi, 2012
4. Ajith Kumar B.P, Python for Education, IUAC publications New Delhi , 2010
5. Mark lutz, Learning Python, O'Reilly media, 2009, USA
6. WEB RESOURCES:
a. Versions 2012 of IUAC publications for expEYES available for download on-line under OGL at
i. IUAC official website www.iuac.res.in
ii. System hardware and software source files and other resources available at ExpEYES official website http://expeyes.in
b. Python programming language official website www.python.org

86