Scribd
Upload
840 views1 page

Kao Corporation, S.A.: SK Fert FA80TS

This technical data sheet provides information about SK FERT FA80TS, an anti-caking agent based on a mixture of mineral oil and fatty derivates. It has a freezing point between 70-76°C, viscosity below 30 cSt at 95°C, and is a brown paste at 20°C. It has a density of 0.83 g/cm3 at 95°C, dropping point between 67-73°C, flash point over 180°C, and is insoluble in water. The anti-caking agent is recommended for application to porous AN at 95-110°C in doses of 500-1200 g per metric ton.

Uploaded by

Moustafa Helmy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
840 views1 page

Kao Corporation, S.A.: SK Fert FA80TS

This technical data sheet provides information about SK FERT FA80TS, an anti-caking agent based on a mixture of mineral oil and fatty derivates. It has a freezing point between 70-76°C, viscosity below 30 cSt at 95°C, and is a brown paste at 20°C. It has a density of 0.83 g/cm3 at 95°C, dropping point between 67-73°C, flash point over 180°C, and is insoluble in water. The anti-caking agent is recommended for application to porous AN at 95-110°C in doses of 500-1200 g per metric ton.

Uploaded by

Moustafa Helmy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Technical Data Sheet

Kao Corporation, S.A.


Member of Kao Chemicals Europe
Puig dels Tudons, 10 -E-08210 - Barberà del Vallès
Phone : +34-93-7399300 e-mail : [email protected]
Fax : +34-93-7399377 Web : www.kaochemicals-eu.com

SK FERT  FA80TS

DESCRIPTION
Anti-caking agent based on mixture of mineral oil and fatty derivates.

TECHNICAL SPECIFICATIONS
FREEZING POINT: 70 – 76ºC
VISCOSITY (cSt, 95ºC) 30 max
PHYSICAL ASPECT (20ºC) Brown paste

TYPICAL PROPERTIES
3
DENSITY (g/cm , 95ºC): 0.83
DROPPING POINT (ºC): 67 – 73
FLASH POINT (ºC): > 180º C
SOLUBILITY: Insoluble in water
MELTING POINT (ºC): 88ºC

APPLICATION PROPERTIES
APPLICATION: Porous AN

APPLICATION TEMPERATURE: 95 -110ºC.

RECOMMENDED DOSES: (500 – 1200) g / MT

The information and recommendations in this publication are to the best of our knowledge reliable. However, nothing herein
is to be construed as a warranty or representation. Users should make their own tests to determine the applicability of such
information or the suitability of any products for their own particular purpose.
Statements concerning the use of the products described herein are not to be construed as recommending the infringement
of any patent and no liability for infringement arising out of any such use is assumed.

SK FERT  FA-80-N JANUARY - 06


Reference: 1DF067 1 of 1

You might also like