SECTION titleSaw

GUILLOTINE

Famous “Wachs Saw” is

used around the world

Unique elliptical stroke

for extended blade life

Goliath Saw shown on

large diameter conductor

Fast Setup & Cutting, Horizontal or Vertical

E.H. Wachs family of portable Guillotine® pipe saws are designed to
cold cut 2in - 32in (DN 50-800) pipe, as well as solids such as bar stock,
rails and beams. Their compact design and easy setup make it the ideal
saw for contractors, pipeline operations, refineries, petrochemical and
processing plants and anywhere a fast, safe cut is needed.

In use virtually everywhere, Wachs Guillotine reciprocating saws

are strong yet light, simple to mount, simple to operate and simply
bulletproof. It’s no wonder that when pipe saws are first mentioned, the
“Wachs Saw” is mentioned first.

48 | | 600 Knightsbridge Parkway | Lincolnshire, Illinois 60069 | +1.847.537.8800 | sales@[Link] | [Link]

GUILLOTINE Saw

Super C, Model D, Super D, Goliath

• Rugged yet compact design requires minimal clearances
• Four models cut from 2in - 32in (DN 50-800)
• Fast setup and cutting, both horizontally or vertically
• Pneumatic, hydraulic and electric drive options
• Optional autofeed and autoclamping on select models
Easy Setup, Vertical or Horizontal
A chain pipe vise clamps the Guillotine Saw to the pipe. The machined cast
iron “V”-saddle base assures square cuts at right angles. It can be mounted
on horizontal as well as vertical piping. Custom bases for unusual workpiece
shapes such as I beams available by special order.
Guillotine Super C
Quick Cold Cuts, Minimal Clearance
Wachs Guillotine saws require minimal clearance (the model Super C needs
as little as 1.5in (38.1mm) on one side of the pipe). All models feature finger
tip feed control. The pipe is cold cut in a matter of minutes. A 6in (152.4mm)
standard wall steel pipe is cut in only 6 minutes. A 16in (406.4mm) diameter
0.5in (12.7mm) wall steel pipe is cut in about 20 minutes.

Portable, Rugged Design

The Guillotine Saws combine compact size and light weight with simple, rugged
­construction for ease of operation and low maintenance.

Long Blade Life

The high-speed steel blades are easily changed. The unique Guillotine cutting
action lifts the blade from the cut on the return stroke, extending blade life.
Elliptical cutting action, long blade life

DIMENSIONS SUPER C MODEL D SUPER D GOLIATH

2-12in 6-18in 10-24in 16-32in

Machine capacity (DN 50-300) (DN 150-450) (DN 250-600) (DN 400-800)
12.75in 18.625in 24.5in 33in
Solids through (324mm) (473mm) (622mm) (838mm)
28in 32in 39in 66in
Clearance overall width (711mm) (813mm) (991mm) (1.676mm)
Clearance on one side 2.5in 3in 3in 66in
min. (63.5mm) (76mm) (76mm) (1.676mm)
115lb 340lb 515lb 1800lb
Operating Weight (52kg) (154kg) (234kg) (816.5kg)
180lb 415lb 620lb 1800lb
Shipping Weight (82kg) (188kg) (281kg) (816.5kg)
23.5in 31.25in 38.25in 66in
Dimension A (596,9mm) (794mm) (972 mm) (1676.4mm)
12.75in 14.5in 14.5in 25in
Dimension B (323,85mm) (368mm) (368mm) (635mm)
31.5in 37in 44in 76.5in
Dimension C (800mm) (940mm) (1118mm) (1943mm)
13.25in 18.75in 24.75in 33in
Dimension D (337mm) (476mm) (629mm) (838mm)
2in 2in 4in
Stroke (51mm) (51mm) (102mm)
Shipping dimensions 26in x 29in x 22in 63in x 47in x 29in CALL CALL
(estimated) (66cm x 74cm x 56cm) (160cm x 119cm x 74cm)

| 600 Knightsbridge Parkway | Lincolnshire, Illinois 60069 | +1.847.537.8800 | sales@[Link] | [Link] | 49

 SECTION titleSpecifications
GUILLOTINE

Specifications
Drive options: Pneumatic or hydraulic (Goliath hydraulic drive only)
Pneumatic drive: 50 cfm at 85 psi (1.4 m³ /min at 5.0 BAR)
Electric drive: 15 A, 110 or 220 Volt single phase
Hydraulic drive: 10gal/min at 1500 psi (38 l/min at 106 BAR)
Controls: Single crank, manual feed. Motor on-off.
Lubrication: Grease fittings at all wear points
Finish: Powder coat frame with zinc coated bow

Standard Equipment Optional Equipment Guillotine cutting pipe

• Drive motor (pneumatic or • Blades: HSS and carbide blades
hydraulic) (depending on the machine
• 1 Standard saw blade version)
• Wrench 1 1/4in (31.75mm) • Control Panel for remote operation
• Air lubricator and filter (Air Model) • Autoclamp mechansim
• Steel storage case • Autofeed mechanism
(Model C and D only) • Custom mounting bases
• Lifting eyes (Model D and Super D)
• Mounting chains
• Manual

Guillotine Saw Kits

Guillotine Goliath cutting
DESCRIPTION PIPE OD PART # powerplant turbine shaft

Super C Pneumatic 2-12in (DN 50-300) 24-000-02

Super C Hydraulic 2-12in (DN 50-300) 24-000-03

Super C Autoclamp Hydraulic 2-12in (DN 50-300) P06-150-502

Super C Autoclamp & Autofeed Hydraulic 2-12in (DN 50-300) P06-150-500

Model D Pneumatic 6-18in (DN 150-457) 04-000-02

Model D Hydraulic 6-18in (DN 150-457) 04-000-03

Cuts a wide variety of materials

Super D Pneumatic 10-24in (DN 250-610) 25-000-01

Super D Hydraulic 10-24in (DN 250-610) 25-000-03

Super D Autoclamp Hydraulic 10-24in (DN 250-610) P06-150-512

Super D Autoclamp & Autofeed Hydraulic 10-24in (DN 250-610) P06-150-510

Goliath Hydraulic 16-32in (DN 400-800) P06-150-523

Goliath Autoclamp Hydraulic 16-32in (DN 400-800) P06-150-522

Goliath Autoclamp & Autofeed Hydraulic 16-32in (DN 400-800) P06-150-520

Field proven performance

50 | | 600 Knightsbridge Parkway | Lincolnshire, Illinois 60069 | +1.847.537.8800 | sales@[Link] | [Link]

SECTION titleAccessories
GUILLOTINE

Miscellaneous Accessories & Spare Parts

MODEL COMPATIBILITY
DESCRIPTION PART #
MODEL C SUPER C MODEL D SUPER D
Air motor conversion
x 03-414-00
(replaces all obsolete motors)
Lubricator retrofit kit x x x x 03-500-10
Spare parts kit x x 03-500-01
Spare parts kit x 04-500-01
Spare parts kit x 25-500-01 Diesel Powered
HPU Hydraulic Power Unit
Manual - Electronic version via e-mail available free upon request. 03-MAN-01

Hydraulic Power Units

For available Hydraulic Power Unit options, see page 74.

Cutting Lubrication
Water soluble, biodegradable, non-hazardous, fully synthetic cooling fluid that
extends the tooling life
DESCRIPTION VERSION WEIGHT PART #
Cutting lubrication KSS-TOP Pump sprayer with 500 ml 1.39lb (630 g) OT790.060.226
Cutting lubrication KSS-TOP refill canister Canister with 10 l 24.25lb (11kg) OT790.060.227

Cutting Lubrication KSS Top

Saw Blades
PROFILE DESCRIPTION APPLICATION PART #

Model C HSS standard blade For general use 03-405-00

Model Super C Carbon steel pipe, stainless steel and other

24-405-00
standard blade - general use high alloy materials

Model Super C carbide blade Cast, ductile and concreted lined pipe 24-405-01

Carbon steel pipe, stainless steel and other

Model D HSS standard blade 04-402-00
high alloy materials

Model D carbide blade Cast, ductile and concreted lined pipe 04-405-01

Carbon steel pipe, stainless steel and other

Model Super D heavy duty blade 25-402-00
high alloy materials

Goliath heavy duty blade For general use P06-150-701

| 600 Knightsbridge Parkway | Lincolnshire, Illinois 60069 | +1.847.537.8800 | sales@[Link] | [Link] | 51