Scribd
Upload
213 views10 pages

Basic Gas Turbine Course Overview

This document introduces a 6-week basic gas turbine course at PIA Training Centre in July 2009. The course will cover gas turbine fundamentals, components, systems and related topics over 3 phases totaling 210 hours. It provides information on duration, instructors, prerequisites, training modes, materials, examination requirements, schedules, and contact details.

Uploaded by

Interogator5
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPSX, PDF, TXT or read online on Scribd
213 views10 pages

Basic Gas Turbine Course Overview

This document introduces a 6-week basic gas turbine course at PIA Training Centre in July 2009. The course will cover gas turbine fundamentals, components, systems and related topics over 3 phases totaling 210 hours. It provides information on duration, instructors, prerequisites, training modes, materials, examination requirements, schedules, and contact details.

Uploaded by

Interogator5
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPSX, PDF, TXT or read online on Scribd

BASIC GAS TURBINE

Course Introduction

Welcome to
PIA Training Centre
for

BASIC GAS TURBINE


COURSE

[Link] Yazdani PIA Training Centre July 2009 1


BASIC GAS TURBINE
Course Introduction

BASIC GAS TURBINE


COURSE

[Link] Yazdani PIA Training Centre July 2009 2


BASIC GAS TURBINE
Course Introduction

•Duration: 6 weeks (210 hours)


• From: 20th July 2009
• To: 28th August 2009
• Instructor(s): Engr. M. Omar Yazdani
Rab Nawaz Amjad (Supervisor)

• Training Level: ATA Spec 104 Level I, II & III


• Pre-requisite: Apprenticeship or 3 yrs aviation exp
• Modes of Training:
• Class-Room: Instructor Lead (TPs, Multimedia, CBT)
• Field Trip: Visits to Hangar/Overhaul shops
•Training Material:
• Book: Gas Turbine Engine & its ops (PW200)
• Hand outs
• Reference Books
[Link] Yazdani PIA Training Centre July 2009 3
BASIC GAS TURBINE
Course Introduction

Course Breakdown
 Phase A (70 hours):
General Engineering and Gas Turbine Fundamentals
 Mathematics
 Physics
 Thermodynamics
 Atmosphere/Aerodynamics
 Engine Thrust
 Workshop Practices/Hardware/Materials
 Hangar/Shop visit
 Phase Examination/Review

[Link] Yazdani PIA Training Centre July 2009 4


BASIC GAS TURBINE
Course Introduction
 Phase B (70 hours):
Engine Components and Systems
 Air Intake
 Gas Turbine Compressor
 Combustion Chamber and Fuel Nozzle
 Turbines
 Exhaust Section
 Materials
 Fuel System
 Lubrication System
 Starting System
 Ignition System
 Anti-icing and De-icing Systems
 Thrust Augmentation
 Engine Control System
 Maintenance Practices
 Hangar/Shop visit
 Phase Examination/Review
[Link] Yazdani PIA Training Centre July 2009 5
BASIC GAS TURBINE
Course Introduction

 Phase C (70 hours):


Propellers and Miscellaneous Systems
 Propellers
 Thrust Reverser System
 Noise Suppression System
 Fire Protection System
 Basic Electricity and Instruments
 Engine Ground Running
 Development in Modern Aircraft Engines
 Air Legislation
 Hangar/Shop visit
 Phase Examination/Review
 Course Evaluation/Comments

[Link] Yazdani PIA Training Centre July 2009 6


BASIC GAS TURBINE
Course Introduction

General Instructions
 Attendance:
 Minimum 80% in each phase

 Examination Passing marks:


 Minimum 70% in each phase

 Timings:
 Class-room hours: 0800 to 1500 hrs

 Tea Breaks: 1000 to 1030 hrs


1200 to 1230 hrs

 Lunch/Prayer Break: 1400 to 1430 hrs

[Link] Yazdani PIA Training Centre July 2009 7


BASIC GAS TURBINE
Course Introduction

General Instructions
 Keep cell phones off or on silent mode

 PTC Building is No Smoking Area

 Learn Fire Safety Instructions

 Park Your Vehicles near Employment Office

[Link] Yazdani PIA Training Centre July 2009 8


BASIC GAS TURBINE
Course Introduction

Contact Information:
 Principal PTC:
 Tel: 904-4725
 Chief Instructor Aerospace:
 Tel: 904-4221

 Chief Examiner Engineering:


 Tel: 904-3229

 Instructor:
 [Link] Yazdani: Cell: 0333-217 9482
E-mail: yazdani@[Link]

[Link] Yazdani PIA Training Centre July 2009 9


BASIC GAS TURBINE
Course Introduction

Enjoy your learning experience.


Have a pleasant stay at PTC!

[Link] Yazdani PIA Training Centre July 2009 10

You might also like