Scribd
Upload
90 views2 pages

2G/3G Drive Test Review Report

The document provides instructions for testing the performance of a cluster of mobile sites. It outlines 10 test methods for 2G and 3G including idle time, short and long calls, packet data transfer while stationary and moving, ping tests, and call setup delays. It defines KPI formulas for call setup success rate, handover success rate, call blocking rate, drop call rate, and data session setup success rate. It also provides settings for ping tests and defines MOS ranges. Formulas are given for 3G to 2G handover rates, packet reselection success rates, Gb link throughput, and TBF drop rates.

Uploaded by

Emma Robbert
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
90 views2 pages

2G/3G Drive Test Review Report

The document provides instructions for testing the performance of a cluster of mobile sites. It outlines 10 test methods for 2G and 3G including idle time, short and long calls, packet data transfer while stationary and moving, ping tests, and call setup delays. It defines KPI formulas for call setup success rate, handover success rate, call blocking rate, drop call rate, and data session setup success rate. It also provides settings for ping tests and defines MOS ranges. Formulas are given for 3G to 2G handover rates, packet reselection success rates, Gb link throughput, and TBF drop rates.

Uploaded by

Emma Robbert
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd

Review Report Cluster

- Number of PO (waiting from Huawei).


- Drivetest Method:
1.MS1 -- Idle
2.MS2 -- Short Call (call to 212 : call 80-90 s/wait 10 s) (2G)
3.MS3 -- Long Call (Call to 3 number 500s until end include MOS test) (2G)
4.MS4 -- 2G Moving packet data transfer (UL 1 MB)---output average throughput
5.MS5 -- 2G Moving packet data transfer (DL 1 MB)---output average throughput
6.MS6 -- 3G Short Call mode(unlock) (Normal)
7.MS7 -- 3G Moving packet data transfer DL(unlock) (Normal)
8.MS8----ping test (2G)
9.MS9----call PSTN for call setup delay time (2G)
10.MS10—3G Movig packet data transfer UL(unlick) (Normal) for KPI

 Site in this cluster (Evaluation Report Before Swap -- Page 2) must complete filled at column BSC
Name,Site Name,SIte ID,Cluster No & Remarks. And for RFC Site give blue color.
 Cluster Map by Google Earth Screenshoot (Evaluation Report Before Swap -- Page 3) Gcell must
be cleared & souronding site outside the cluster border must be shown.
- KPI OSS (BSC Level -- Busy Hour).

KPI Formula :
1. Call Setup Success Rate (CSSR)= (total call established/total call attempt)*100
2. Handover Success Rate (HOSR)= (Total succsess HO/total HO attempt)*100 => HO success= HO
attempt - HO Failure
3. Call Blocking Rate = (total block call/ total call attempt)*100
4. Drop Call Rate = (total call drop/call established)*100
5. Data session setup succes rate : (PDP Context activation-PDP context fail)/pdp context
activation *100
6. Moving MS FTP download/upload 1MB for 2G :average of session app. means throughput
(DL/UL).
7. Call Setup Delay --> event --> allerting -->event info : diambil data MO call,setuptime x ms -->
average (3 number to PSTN Number)
8. Mean PESQ Score --> direction -->DL--> MS6 SQI MOS make data blank --> highlight.
9. So I suggest to select FTP call drop as Session Drop which we can find Session Drop
Rate=(Session Start-Session End)/Session start *100%,
10. 60 sec means session duration that 1M file FTP download is required less than 60 seconds
(1M/18KBPS is around 60 sec)

- Setting untuk ping test


equipment : DC9
phone book entry : 3data
phone number : *99#
user : 3grps
pass : 3grps
remote address : [Link]
packet size : 20 byte
wait time : 1
number of ping : 20
stationary : 5 places (represent cluster condition)
output : average delay (sum of all places and then average)s

1. MS initiated service setup time --> export lgfile ms 4 & 5 with option (event information --.>
mode report detail checked)--> in result : message type : active pdp context accept --> event info
: pdp context completion time : X ms

- For MOS range : (3 number to 3 number)


0 < X <= 1
1 < X <= 2
2 < X <= 3
3 < X <= 4
4 < X <= 5

3G to 2G Handover successful rate : Handover from Utran and Handover from Utran Fail => formula HO
Success Rate= Handover from Utran/ (Handover from Utran+Handover from Utran Fail)

Packet re-selection Success Rate during data transfer from 3G to 2G

NSN Formula ( Gb Link throughput)

GbULThroughput =(Sum(MUTHBS(1,2,3))+MSTHBS(1))*8/1000 Kbps


GbDLThroughput =(Sum(MUTHBS(4,5,6))+MSTHBS(2))*8/1000 Kbps

* tbf drop rate (UL) = sum(UNSTETBF 1...3,UNSTETBF_13?5,UNSTETBF_19?1))/sum(SULACCEL_1…


SULACCEL_3...SULACCEL_4 - BR10 Only)

* tbf drop rate (DL) = sum(UNSTETBF_4?,UNSTETBF_16?8,UNSTETBF_22?4))/sum(SULACCEL_5…


SULACCEL_7)

You might also like