Leopard DI550 T3
SURFACE DRILLS
TECHNICAL SPECIFICATION
KEY FEATURES
Leopard DI550 is a diesel powered, self-contained
Hole diameter: 90 - 165 mm 3½” – 6 ½”
ENG/METRIC. © Sandvik Mining and Rock Technology SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
crawler mounted drilling rig designed for DTH blasthole
drilling in the mining, quarry and construction industries. Drill pipes: 76, 89, 102 and 114 mm 3”,
The drill is equipped with an operator’s cabin, fixed boom, 3½”, 4” and 4½”
dry dust collector and drill pipe changer. The design and DTH-Hammer 4”, 5” and 6”
the lay-out are according to latest state-of-art. Engine output: 328 kW (Tier 3)
Air delivery 24,4 m3/min at 24 bar 862 cfm
at 348 psi
Production capacity: 1,85 Mt/a, one shift
Total weight : 23 700 kg
1. TECHNICAL SPECIFICATION – Leopard DI550 T3 - 1 –2017-07-10
ROTARY HEAD Transmission type Direct
Rotary head HTRH6 Screw compressor type GHH CF 1000H
Drill pipes 76 / 89 / 102 / 114 mm 3” / 3½” Air filters 2 pcs, dry type
/ 4” / 4½”
Operating pressure 180 bar Fuel tank 930 litres
Rotation speed 0…80 rpm
Maximum rotation torque 4300 Nm HYDRAULIC SYSTEM
Hammer lubrication Air / oil mist Filtration rate 10 micron
Flushing Air Cooling capacity Up to +55°C ambient
Weight 478 kg Hydraulic oil tank 350 l
Shank lubrication device SLU 50
FEED
Feed type Chain feed CONTROL SYSTEM
Total length 10050 mm Control system type PLC controlled electro-
Rotary head travel 5990 mm proportional hydraulics
Tramming/boom/ drilling PLC controlled
Length of tubes 5000 mm control
Hose reel Standard User interface Electro proportional joysticks
and screen
Feed extension travel 1200 mm Antijamming system Standard
Feed/pull out force 32 kN Collaring control Automatic
Feed swing -30/+95° Voltage 24 VDC
Feed tilt -35/+93°
DUST COLLECTOR
Dust collector type X-150
Capacity/vacuum 51 m3/min at 500 mm WG
Filter elements/material 4 pcs / fiber
PIPE CHANGER
Total filter surface 16 m2
Pipechanger type Carousel
Primary cyclone Standard
Storage capacity 7+1 (76 to 102 mm pipes)
5+1 (114 mm drill pipe) Movable suction head Standard
Pipe length 5000 mm
Max. hole depth 40 m *
CARRIER
Track type FL 6
BOOM Grouser plate width 400 mm
Boom type Fixed Ground contact length 2450 mm
Boom extension 500 mm (Optional) Ground pressure 1.2…1.3 kg/cm2
Boom reach 3,6 m Ground clearance 360 mm
Boom swing 0/+20° Oscillation angles +/- 10°
Collaring height + 0,5 / -3,8 m Tramming force 140 kN
Horizontal holes To the right Max. tramming speed 1.6 / 3.2 km/h
CABIN
Cabin type HVC550
Certificates FOPS and ROPS
Noise level in the cabin <80 dB (A)
Air conditioning Standard*
Pressurization Standard
Seat Ergonomic, adjustable
Vibration dampening Standard
Windows Safety laminated, tinted
* Air condition system contains fluorinated greenhouse gases
HFC-134a
POWERPACK
Engine type Caterpillar C13 (Tier 3)
Number of cylinders 6
den and other countries.
Engine output 328 kW / 1800 rpm
2. TECHNICAL SPECIFICATION – Leopard DI550 T3 - 1 –2017-07-10
STANDARD COMPONENTS SELECTION OF OPTIONS
Rotary head HTRH6
Chain feed
Pipe changer, carousel type
Fixed boom
Cabin HVC550
Carrier, track mounted
Powerpack, diesel driven, hydraulic pumps and onboard
compressor
Dust collector X-150
Hydraulic system, load sensing
Control system
Working lights, 11 pcs, 3 pcs in engine compartment
ENG/METRIC. © Sandvik Mining and Rock Technology. SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
1 Set Manuals, paper copy
1 Set Manuals, CD rom
THE JAWS FOR DRILL STEELS
DRILL STEEL TYPE DRILL STEEL RECOMMENDED
DIAMETER HOLE DIAMETER
Pipes 76/89 mm 89 - 127 mm 3½" -
5"
Pipes 102/114mm 114 - 165 mm 4½"
- 6 ½"
3. TECHNICAL SPECIFICATION – Leopard DI550 T3 - 1 –2017-07-10
COVERAGE AREA AND DIMENSIONS
ENG/METRIC. © Sandvik Mining and Rock Technology. SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
DIMENSIONS
Weight 23 700 kg
Width 2.49 m
Height a/b, 3.37/3.29 m
Total length c/d, 12.6/12.1 m
Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification to users.
Please contact a Sandvik representative for clarification on specifications and options.
[Link]
4. TECHNICAL SPECIFICATION – Leopard DI550 T3 - 1 –2017-07-10
