Scribd
Upload
161 views1 page

CL2 Repair Clamps Specifications Guide

This document provides specifications for Style CL2 repair clamps in two sections for pipes. The clamps have stainless steel shells and ductile iron lugs. They come in various nominal outer diameter pipe size ranges and lengths. The document lists catalog numbers, prices, weights, bolt specifications and numbers of bolts for each size. It also provides material, gasket and certification information and limitations on clamp use.

Uploaded by

Al Jameel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
161 views1 page

CL2 Repair Clamps Specifications Guide

This document provides specifications for Style CL2 repair clamps in two sections for pipes. The clamps have stainless steel shells and ductile iron lugs. They come in various nominal outer diameter pipe size ranges and lengths. The document lists catalog numbers, prices, weights, bolt specifications and numbers of bolts for each size. It also provides material, gasket and certification information and limitations on clamp use.

Uploaded by

Al Jameel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

REPAIR CLAMPS [Link].

com • 1-800-426-9341

STYLE CL2 (two section)


WIDER RANGE .80” w/ REMOVABLE LUGS

MATERIAL SPECIFICATIONS
SHELLS: Stainless steel per ASTM A 240, type 304.
LUGS: Ductile iron per ASTM A 536, Grade 65-45-12. Boat-nose
fingers designed for ease of installation. Lugs are removable.
E-Coat epoxy coated for improved corrosion resistance.
REPAIR CLAMPS

BOLTS AND NUTS: Trackhead, 5/8” UNC rolled thread, high


strength, low alloy, corrosion-resistant steel per AWWA 111.
Stainless steel nuts and bolts available on request.
GASKETS: SBR per ASTM D 2000 MAA 610, compounded for
water and sewer service. Other compounds available on request.

MEETS
NSF61 certified upon request.
AWWA C230 MADE IN U.S.A.

CL2-9.39 X 12” REPAIR CLAMP

NOM. O.D. SIZE LENGTH


LENGTH/ /WEIGHT
WEIGHT
PIPE SIZE RANGE CATALOG NUMBER 71/2" 10" 12" 15" 20 " 25” 30”
4.47 - 5.27 CL2 - 5.27 x length
4.77 - 5.57 $186.59 $246.62 $291.15 $371.03 $553.99
4” 5.20 - 6.00
CL2 - 5.57 x length
21# 28# 34# 41# 55# N/A N/A
CL2 - 6.00 x length 1
6.57 - 7.37 CL2 - 7.37 x length
216.44 278.26 324.72 432.89 577.19 720.26 863.18
6” 6.84 - 7.64 CL2 - 7.64 x length 22# 29# 37# 44# 58# 73# 88#
7.20 - 8.00 CL2 - 8.00 x length 1
8.59 - 9.39 CL2 - 9.39 x length
244.79 309.20 360.75 492.17 639.00 812.99 986.86
8” 8.99 - 9.79 CL2 - 9.79 x length 23# 31# 39# 46# 62# 77# 93#
9.20 - 10.00 CL2-10.00 x length 1
10.70 - 11.50 CL2-11.50 x length 256.77 412.27 570.44 620.97 824.55 1,030.73 1,236.83
10” 11.04 - 11.84 CL2-11.84 x length 24# 33# 41# 49# 65# 80# 98#
11.40 - 12.20 CL2-12.20 x length
12.70 - 13.50 CL2-13.50 x length
13.15 - 13.95 CL2-13.95 x length 329.05 458.62 647.62 680.23 909.58 1,135.12 1,360.50
12” 13.50 - 14.30 CL2-14.30 x length 26# 34# 43# 52# 69# 86# 103#
13.71 - 14.51 CL2-14.51 x length

15.00 - 15.80 CL2-15.80 x length 481.22 767.89 823.06 1,105.41 1,494.48 1,878.54 2,262.36
14” 15.95 - 16.75 CL2-16.75 x length 28# 36# 45# 54# 72# 90# 108#

Add on for 304 stainless steel bolts & nuts 65.00 91.27 116.89 136.98 182.64 228.20 273.86
1
Recommended for use on CL200 ACRB.
FOR TAPPED CL2 SEE PAGE 2-14.

NUMBER OF BOLTS PER CLAMP LENGTH For higher working pressures, clamp length should equal or exceed diameter
of pipe. Some sizes and lengths not listed are available on request.
OD RANGE 71/2" 10" 12" 15" 20" 25" 30" Clamps are not to be used for joining plain end pipe.
All Ranges 6 8 10 12 16 20 24

TO ORDER: Specify catalog number x length of clamp desired.


EXAMPLE: For a two-section clamp for pipe with an O.D. between 8.59 and 9.39 and clamp length of 12” order CL2 - 9.39 x 12”

2-12 JULY 01, 2017

You might also like