Gas Analyser
Opus 400
AquaSense
Protects the optical bench from water.
Communication
The Opus 400 now features both
Bluetooth and USB
Very fast warm-up
The time from starting the machine
until it is ready to measure is less than
10 seconds and full accuracy within 2
minutes.
Upgrades
New firmware can be dowloaded
directly from service software
Measurement
Both the accuracy and the resolution
are improved.
The success with the Opus 40 series continues with the new Opus Optical bench
Solid state detector, OIML class 0
400. Many of the Opus 40 key features are kept, they just worked
(highest class) with the latest
too well to change. Other features are new to further improve the technology and highest accuracy.
mesurements and handling.
Stability
12 months calibration interval
The start up time for the Opus 400 up is much shorter and the new
water protection system AquaSense keeps the instrument from
beeing damaged by water.
The measurements are very easy to read thanks to the large and
very bright LED display, even at long distances.
Communication now also with Bluetooth enables flexible solutions
for the modern workshop and vehicle inspection.
OPUS 400 is made of the best available components of industrial
quality for testing cars, motorcycles and mopeds in vehicle
inspection applications and professional workshops.
With the OPUS 100 option the OPUS 400 becomes a combination unit for
measuring petrol, LPG cars and diesel vehicles.
Technical data
Range Accuracy Resolution
+/-abs (+/-rel.)
0 - 10 vol. % 0.02 % (3 %) 0.01
CO
10.01% -15% 5%
0 - 2000 ppm 4 ppm (3%) 1
HC 2001-5000 ppm (5%)
5001-15000 ppm (10%)
CO2 0 - 16 vol. % 0.3 (3%) 0.01
16.01%-20% (5%)
O2 0 - 25 vol. % 0.02% (1%) 0.01
Lambda 0,6 - 1,7 0.001
AFR 0-35 0.01
NOx 0 - 5000 vol. ppm 1
Rpm 0 - 9999 r/m 1
(2/4 stroke)
Oil temperature 0 - 160oC 1
Warm-up time Full accuracy in 2 minutes.
Response time < 5 sec. to 95 % of measured value
Pump capacity 5-7 l/min, minimum
Max exhaust gas temp 400o C
Hose and Probe 7 m gas sampling hose with stainless steel probe
Optical bench Non-dispersive infrared (NDIR)
Solid state detector
Printer Thermal Printer
Accessories Bluetooth
RPM by Battery voltage measurement, Piezo electric, OBD
IR temperature
Sensor for oil dip-stick or IR
Power supply 100-240 VAC. 50-60 Hz., 10-30 VDC
Size (WxHxD) 400x240x260
Operating conditions Relative air humidity: up to 90 %
Atmosph. ambient pressure: 750 mbar – 1100 mbar
Power variation: 230 VAC -15% to +10%
50 Hz +/- 2%
Warranty 12 Months
Agent:
Opus Prodox AB Bäckestensgatan 11C Tel +46 31 748 34 00 sales@[Link]
SE-431 49 Mölndal Fax +46 31 28 86 55 [Link]
Sweden