BENDING
BENDING M
MACHINES
ACHINES SPB 66-20
20 STANDARD
CE Approved
For bending pipe from 6” through 20”
SPECIFICATIONS
HYDRAULIC SYSTEM
Type Gear
Maximum oil flow 12.6 U.S. gal/min / 48 lt/min
Pressure 2,900 p.s.i. / 200 bar
CONTROLS
Type Danfoss 5 valves proportional operated
Control Manual
ELECTRIC SYSTEM
Voltage 12 V
Batteries in series, maintenance free 1
Mandrel not included
Total rating 100 Amp/hr
Alternator 30 Amperes
AVAILABLE ENGINES Starter 4 kW
ENGINE CATERPILLAR PERKINS * DEUTZ
Net flywheel power (DIN 6271) 47 HP 37 HP 41 HP WINCH
Model C2.2 104.19 Silent-Pack F3L 1011F Type Hydraulic drive
Governed speed 2,600 rpm 2,500 rpm 2,500 rpm Motor Orbital type
Number of cylinders 4 4 4 Line-pull 6,615 lb / 3,000 daN
Displacement 2.2 Liters 1.99 Liters 1.366 Liters Cable diameter 1/2” / 12 mm
Bore x stroke 84 X 100 mm 84 x 90 mm 91 x 105 mm Working pressure 1,990 p.s.i. / 140 bar
Sound proofing type yes yes yes Speed at first layer 12.1 ft/min / 3.7 mt/min
* Default engine
TIRES
SHIPPING WEIGHT AND DIMENSIONS Type Tubeless
Shipping Length 161.4” (4,100 mm) Size 115/80 - 15.3
Shipping Width 81.9” (2,080 mm)
Gauge 1,750 mm
Shipping Height 74.8” (1,900 mm)
Parking brake Drum type
Shipping Net Weight (Complete) 11,250 lb / 5,100 Kg
Operating Weight 11,250 lb / 5,100 kg
CAPACITIES
Tires Pneumatic Tires Tubeless 115/80-15.3
Hydraulic System Max. Operating Pressure 2,900 p.s.i. / 200 bar Fuel tank 60 liters / 16 U.S. gal
Extra hydraulic control valves 2 Hydraulic system 120 liters / 32 U.S. gal
SPD 6-20 Standard Pipe Bending Machine
SPB 6-20 standard is our classic machine, resulting from over 35 valves enable the operator to set the mandrel pressure indepen-
years of experience. The demand for this small pipe bender is due dently from the machine.
to its semplicity and its strong structure.
The hydraulic cylinders are sized in such a way that they can
operate with pressures exceeding 200 bar.
The frame is made of high quality steel, and the parts mostly
subject to stresses have been ribbed and boxed to ensure
The diesel engine is in a fully insulated and hinged compartment,
maximum resistance, though keeping the machine weight as
which swings open and enables the operator to gain access to
light as possible. the engine for maintenance purposes. The SPB 6-20 Standard
is installed on rubber wheels, which make its travel easy on any
The hydraulic system has 5 spools; the fourth and fifth spool may job site, although it is undoubtedly the best solution, especially in
be used to control the hydraulic mandrel, if fitted. The separate small- and medium-sized projects.
BENDING
BENDING M
MACHINES
ACHINES SPB 66-20
20 STANDARD
SPECIFICATIONS
Cylinder Two Out-Board Two In-Board One Pin-Up
Bore 7.8” / 200 mm 7” / 180 mm 5.1” / 130 mm
Stroke 12.4” / 315 mm 6” / 150 mm 29.5” / 750 mm
Max. Push 332,275 lb / 150,720 kg 228,439 lb / 103,620 kg 70,194 lb / 31,840 kg
Auxiliary Quick Disconnect Size Maximum Flow Adj. Pressure
Aux-1 1/2” 24 U.S. gal/min / 90 liters/min 2,844 p.s.i. / 200 bar
Aux-2 3/8” 12.6 U.S. gal/min / 48 liters/min 2,844 p.s.i. / 200 bar
BENDING DATA (U.S.)
Pipe O.D. Maximum Wall Thickness By Grade (Inch) Recommended Bend
inch X52 X60 X65 X70 Degree per Radius Max Degree
Arc Foot Feet Per 40 Feet
6 2-3/4 2-3/16 1-5/16 1-5/16 4.41 13 132.30
8 2-3/16 2-3/16 1-5/16 1-9/32 3.82 15 114.60
10 2-3/16 1-5/16 1-9/32 1-1/4 2.86 20 85.80
12 2-1/16 1-1/4 1-3/32 1-3/32 2.30 25 69.00
14 1-3/4 1-1/32 31/32 7/8 1.70 34 51.00
16 1-3/16 13/16 3/4 11/16 1.51 38 45.30
18 1-1/32 5/8 9/16 17/32 1.10 52 33.00
20 11/16 7/16 9/32 11/32 0.83 69 24.90
BENDING DATA (METRIC)
Pipe O.D. Maximum Wall Thickness By Grade (mm) Recommended Bend
mm/in X52 X60 X65 X70 Ratio Radius Max Degree
Radius: O.D. Meter Per 12 Meters
6 / 168 55.8 55.8 33.8 33.8 23.6 3.96 132.30
8 / 219 55.8 55.8 33.8 33 20.9 4.57 114.60
10 /273 55.8 33.8 33 31.43 22.3 6.10 85.80
12 / 324 52.8 31.43 27.94 27.94 23.5 7.62 69.00
14 / 355.6 44 26.21 24.45 22.68 29.1 10.36 51.00
16 / 406.4 34.9 20.9 19.22 17.46 28.5 11.58 45.30
18 / 457.2 26.21 15.69 13.97 13.10 34.7 15.85 33.00
20 / 508 17.46 11.34 10.48 8.71 41.4 21.03 24.90
DIMENSIONS
A 4.1 m / 13.5'
B 3.03 m / 6.8'
C 1.9 m / 6.25'
D 2.05 m / 6.7'
K E 87 cm / 2.85'
C
F 68 cm / 2.25'
G 1.94 m / 6.4'
J
H 61 cm / 2'
I
I 45.5 cm / 1.5'
J 71.5 cm / 2.4'
E F G H D K 40 cm / 1.3'
L 30 cm / 1'
A B
CONTACT INFORMATION
Main office – General inquiries Worldwide offices Latin America
SUPERIOR Manufacturing Europe and Australia Salvador Villasana
16031 East Freeway Juergen Hafemann Phone +52.81.8.394.0160
Channelview, TX 77530 Phone +49.0.231.963.3073 Germany
[email protected]U.S.A. Phone +61.0.400.144.432 Australia
Phone 281.457.4400
[email protected] North America
Fax 281.452.5455 Rick Layh
U.S. Toll Free 800.383.2666 India Phone +1.281.457.4400
Abhishek Bhotika
[email protected]Intl. Toll Free 800.9675.3948
Phone +91.11.414.59230
[email protected] [email protected]www.worldwidemachinery.com
Africa
Italy office
Evan Greenberg
SUPERIOR Manufacturing Phone +1.281.452.5800
Via Roma, 18 [email protected]
San Pancrazio, Parma
Italy Russia, China
and the Middle East
Sergio Braoude
Phone +39.349.198.1281 Italy
Evan Greenberg Phone +7.495.507.4827 Russia
Vice-President of Intl. Operations [email protected]
DISCLAIMER
DISCLAIMER
DISCLAIMER
The information contained in this brochure is intended to be of a general nature only. The SUPERIOR Manufacturing Company
may at any time and from time to time, for technical or other necessary reasons, modify any of the details or specifications of
the product described in this brochure. Illustrations do not necessarily show products in standard conditions. The dimensions,
weights and capacities shown herein, as well as any conversion data used, are approximate only and are subject to variations
within normal manufacturing techniques.
