0% found this document useful (0 votes)
62 views13 pages

I. Data Pengamatan

The document contains calibration curves for the flow rates of two pumps (G1 and G2) at different opening percentages. It also includes conductivity data from three runs of a reaction at different flow rate combinations of G1 and G2. The data is used to calculate the reactant concentrations at the inlet of the reactor and the conversion (XA) at different time points for each run. Plots of conversion vs conductivity are shown, indicating a linear relationship between the two for each run.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
62 views13 pages

I. Data Pengamatan

The document contains calibration curves for the flow rates of two pumps (G1 and G2) at different opening percentages. It also includes conductivity data from three runs of a reaction at different flow rate combinations of G1 and G2. The data is used to calculate the reactant concentrations at the inlet of the reactor and the conversion (XA) at different time points for each run. Plots of conversion vs conductivity are shown, indicating a linear relationship between the two for each run.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

I.

DATA PENGAMATAN

Volume Tangki Umpan = 15 Liter


Volume Reaktor = 0,8 Liter

 Kalibrasi Laju Alir


1.) Kalibrasi Laju Alir Umpan G1

Bukaan pompa Laju Alir


t (s) V (mL)
G1 (mL/s)
20% 39,1 10 0,256
30% 29,15 10 0,343
40% 14,33 10 0,698
50% 9,95 10 1,005
60% 7,71 10 1,297
70% 7,47 10 1,339
80% 6,35 10 1,575
90% 5,9 10 1,695
100% 3,8 10 2,632

2.) Kalibrasi Laju Alir Umpan G2

Bukaan pompa Laju Alir


t (s) V (mL)
G2 (mL/s)
20% 47 10 0,213
30% 22,63 10 0,442
40% 15,63 10 0,640
50% 11,33 10 0,883
6% 9,45 10 1,058
70% 8,34 10 1,199
80% 6,62 10 1,511
90% 5,71 10 1,751
100% 5,2 10 1,923
3.) Kurva Kalibrasi

Kurva Kalibrasi Laju Alir (mL/s) terhadap


Bukaan Valve (%)
3.000
2.500
Laju Alir (mL/s)
2.000
1.500
1.000
0.500
0.000
20% 30% 40% 50% 60% 70% 80% 90% 100%
Valve G1 0.256 0.343 0.698 1.005 1.297 1.339 1.575 1.695 2.632
Valve G2 0.213 0.442 0.640 0.883 1.058 1.199 1.511 1.751 1.923
Bukaan Valve (%)

 Tabel Data Pengamatan


1.) Run ke =1
Bukaan Valve G1 = 50%
Bukaan Valve G2 = 50%
C0NaOH = 0,1 N
C0Etil Asetat = 0,1 N

Ʌ
No waktu (menit)
(mS/cm)
1 0 3
2 2 3,36
3 4 2,39
4 6 3,4
5 8 3,66
6 10 3,49
7 12 3,63
8 14 3,6
9 16 3,65
10 17 3,68

2.) Run ke =2
Bukaan Valve G1 = 70%
Bukaan Valve G2 = 70%
C0NaOH = 0,1 N
C0Etil Asetat = 0,1 N

Ʌ
No waktu (menit)
(mS/cm)
1 0 1,76
2 2 1,93
3 4 3,47
4 6 3,44
5 8 3,53
6 10 3,38
7 12 3,65
8 14 3,7
9 16 3,69
10 17 3,59

3.) Run ke =3
Bukaan Valve G1 = 90%
Bukaan Valve G2 = 90%
C0NaOH = 0,1 N
C0Etil Asetat = 0,1 N

Ʌ
No waktu (menit)
(mS/cm)
1 0 3,68
2 2 3,71
3 4 4,18
4 6 4,09
5 8 4,13
6 10 4,11

II. PENGOLAHAN DATA


1.) Run ke =1
Bukaan Valve G1 = 50%
Bukaan Valve G2 = 50%
C0NaOH = 0,1 N
FNaOH = 0,883 mL/s
FEtil Asetat = 1,005 mL/s
 Menghitung Konsentrasi Reaktan pada Inlet Reaktor
𝐢𝐧
𝐂𝐍𝐚𝐎𝐇
𝑖𝑛 𝐹𝑁𝑎𝑂𝐻 𝐷1
𝐶𝑁𝑎𝑂𝐻 =𝐹 𝐶𝑁𝑎𝑂𝐻
𝑁𝑎𝑂𝐻 +𝐹𝐸𝑡𝐴𝑜

𝑖𝑛 0,883 𝑚𝐿/𝑠
𝐶𝑁𝑎𝑂𝐻 = (0,883+1,297)𝑚𝐿/𝑠 𝑥 0,1 𝑁
𝑖𝑛
𝐶𝑁𝑎𝑂𝐻 = 0,04 𝑁

𝐢𝐧
𝐂𝐄𝐭𝐀𝐨
𝑖𝑛 𝐹𝐸𝑡𝐴𝑜 𝐷2
𝐶𝐸𝑡𝐴𝑜 =𝐹 𝐶𝐸𝑡𝐴𝑜
𝑁𝑎𝑂𝐻 +𝐹𝐸𝑡𝐴𝑜

𝑖𝑛
1,297 𝑚𝐿/𝑠
𝐶𝐸𝑡𝐴𝑜 = 𝑥 0,1 𝑁
(0,883 + 1,297)𝑚𝐿/𝑠
𝑖𝑛
𝐶𝐸𝑡𝐴𝑜 = 0,059 𝑁

𝑖𝑛 𝑖𝑛 ∞ 𝑖𝑛
Apabila 𝐶𝑁𝑎𝑂𝐻 ≤ 𝐶𝐸𝑡𝑖𝑙 𝐴𝑠𝑒𝑡𝑎𝑡 maka 𝐶𝑁𝑎𝑂𝐻 = 𝐶𝑁𝑎𝑂𝐻 = 0,04 𝑁

 Menghitung Nilai Konversi (XA) pada waktu tertentu (t)


Contoh perhitungan pada t = 2 menit
𝑡
𝐴𝑜 − 𝐴𝑡 ∞ 0 0
𝐶𝑁𝑎𝑂𝐻 =( ) (𝐶𝑁𝑎𝑂𝐻 − 𝐶𝑁𝑎𝑂𝐻 ) + 𝐶𝑁𝑎𝑂𝐻
𝐴𝑜 − 𝐴∞
𝑡
3 − 3,36
𝐶𝑁𝑎𝑂𝐻 =( ) (0,04 − 0,1)𝑁 + 0,1 𝑁
3 − 3,68
𝑡
𝐶𝑁𝑎𝑂𝐻 = 0,068 𝑁
0 𝑡
𝐶𝑁𝑎𝑂𝐻 −𝐶𝑁𝑎𝑂𝐻
Maka XA = 0
𝐶𝑁𝑎𝑂𝐻
0,1 𝑁 −0,068 𝑁
= 0,1 𝑁

= 0,318

Waktu Ʌ Cᵗ NaOH
XA
(menit) (mS/cm) (N)
0 3 0,100 0,000
2 3,36 0,068 0,318
4 2,39 0,154 -0,538
6 3,4 0,065 0,353
8 3,66 0,042 0,582
10 3,49 0,057 0,432
12 3,63 0,044 0,556
14 3,6 0,047 0,529
16 3,65 0,043 0,574
17 3,68 0,040 0,600
Kurva Hubungan Konversi (Xa) terhadap
Konduktivitas Run 1
0.800

0.600
y = 0.8824x - 2.6471
0.400 R² = 1
Konversi Xa

0.200

0.000
0 0.5 1 1.5 2 2.5 3 3.5 4
-0.200

-0.400

-0.600
Konduktivitas (mS/cm)

2.) Run ke =2
Bukaan Valve G1 = 70%
Bukaan Valve G2 = 70%
C0NaOH = 0,1 N
FNaOH = 1,575 mL/s
FEtil Asetat = 1,199 mL/s
 Menghitung Konsentrasi Reaktan pada Inlet Reaktor
𝐢𝐧
𝐂𝐍𝐚𝐎𝐇
𝑖𝑛 𝐹𝑁𝑎𝑂𝐻 𝐷1
𝐶𝑁𝑎𝑂𝐻 =𝐹 𝐶𝑁𝑎𝑂𝐻
𝑁𝑎𝑂𝐻 +𝐹𝐸𝑡𝐴𝑜

𝑖𝑛 1,199
𝐶𝑁𝑎𝑂𝐻 = 1,199+1,575 𝑥 0,1 𝑁
𝑖𝑛
𝐶𝑁𝑎𝑂𝐻 = 0,034 𝑁

𝐢𝐧
𝐂𝐄𝐭𝐀𝐨
𝑖𝑛 𝐹𝐸𝑡𝐴𝑜 𝐷2
𝐶𝐸𝑡𝐴𝑜 =𝐹 𝐶𝐸𝑡𝐴𝑜
𝑁𝑎𝑂𝐻 +𝐹𝐸𝑡𝐴𝑜

𝑖𝑛
1,575
𝐶𝐸𝑡𝐴𝑜 = 𝑥 0,1 𝑁
1,199 + 1,575
𝑖𝑛
𝐶𝐸𝑡𝐴𝑜 = 0,056 𝑁
𝑖𝑛 𝑖𝑛 ∞ 𝑖𝑛
Apabila 𝐶𝑁𝑎𝑂𝐻 ≤ 𝐶𝐸𝑡𝑖𝑙 𝐴𝑠𝑒𝑡𝑎𝑡 maka 𝐶𝑁𝑎𝑂𝐻 = 𝐶𝑁𝑎𝑂𝐻 = 0,034 𝑁

 Menghitung Nilai Konversi (XA) pada waktu tertentu (t)


Contoh perhitungan pada t = 2 menit

𝑡
𝐴𝑜 − 𝐴𝑡 ∞ 0 0
𝐶𝑁𝑎𝑂𝐻 =( ) (𝐶𝑁𝑎𝑂𝐻 − 𝐶𝑁𝑎𝑂𝐻 ) + 𝐶𝑁𝑎𝑂𝐻
𝐴𝑜 − 𝐴∞
𝑡
1,76 − 1,93
𝐶𝑁𝑎𝑂𝐻 =( ) (0,034 − 0,1)𝑁 + 0,1 𝑁
1,76 − 3,59
𝑡
𝐶𝑁𝑎𝑂𝐻 = 0,094 𝑁
0 𝑡
𝐶𝑁𝑎𝑂𝐻 −𝐶𝑁𝑎𝑂𝐻
Maka XA = 0
𝐶𝑁𝑎𝑂𝐻
0,1 𝑁 −0,094 𝑁
= 0,1 𝑁

= 0,061

Waktu Ʌ Cᵗ NaOH
XA
(menit) (mS/cm) (N)

0 1,76 0,1 0

2 1,93 0,094 0,061

4 3,47 0,038 0,617

6 3,44 0,039 0,606

8 3,53 0,036 0,638

10 3,38 0,042 0,584

12 3,65 0,032 0,682

14 3,7 0,030 0,700

16 3,69 0,030 0,696

17 3,59 0,034 0,660


Kurva Hubungan Konversi (Xa) terhadap
Konduktivitas Run 2
0.8
0.7
y = 0.3607x - 0.6348
0.6 R² = 1
Konversi Xa
0.5
0.4
0.3
0.2
0.1
0
0 0.5 1 1.5 2 2.5 3 3.5 4
Konduktivitas (mS/cm)

3.) Run ke =3
Bukaan Valve G1 = 90%
Bukaan Valve G2 = 90%
C0NaOH = 0,1 N
FNaOH = 1,695 mL/s
FEtil Asetat = 1,751 mL/s
 Menghitung Konsentrasi Reaktan pada Inlet Reaktor
𝐢𝐧
𝐂𝐍𝐚𝐎𝐇
𝑖𝑛 𝐹𝑁𝑎𝑂𝐻 𝐷1
𝐶𝑁𝑎𝑂𝐻 =𝐹 𝐶𝑁𝑎𝑂𝐻
𝑁𝑎𝑂𝐻 +𝐹𝐸𝑡𝐴𝑜

𝑖𝑛 1,695
𝐶𝑁𝑎𝑂𝐻 = 1,751+1,695 𝑥 0,1 𝑁
𝑖𝑛
𝐶𝑁𝑎𝑂𝐻 = 0,049 𝑁

𝐢𝐧
𝐂𝐄𝐭𝐀𝐨
𝑖𝑛 𝐹𝐸𝑡𝐴𝑜 𝐷2
𝐶𝐸𝑡𝐴𝑜 =𝐹 𝐶𝐸𝑡𝐴𝑜
𝑁𝑎𝑂𝐻 +𝐹𝐸𝑡𝐴𝑜

𝑖𝑛
1,751
𝐶𝐸𝑡𝐴𝑜 = 𝑥 0,1 𝑁
1,751 + 1,695
𝑖𝑛
𝐶𝐸𝑡𝐴𝑜 = 0,05 𝑁
𝑖𝑛 𝑖𝑛 ∞ 𝑖𝑛
Apabila 𝐶𝑁𝑎𝑂𝐻 ≤ 𝐶𝐸𝑡𝑖𝑙 𝐴𝑠𝑒𝑡𝑎𝑡 maka 𝐶𝑁𝑎𝑂𝐻 = 𝐶𝑁𝑎𝑂𝐻 = 0,049 𝑁

 Menghitung Nilai Konversi (XA) pada waktu tertentu (t)


Contoh perhitungan pada t = 2 menit

𝑡
𝐴𝑜 − 𝐴𝑡 ∞ 0 0
𝐶𝑁𝑎𝑂𝐻 =( ) (𝐶𝑁𝑎𝑂𝐻 − 𝐶𝑁𝑎𝑂𝐻 ) + 𝐶𝑁𝑎𝑂𝐻
𝐴𝑜 − 𝐴∞
𝑡
3,68 − 3,71
𝐶𝑁𝑎𝑂𝐻 =( ) (0,049 − 0,1)𝑁 + 0,1 𝑁
3,68 − 4,41
𝑡
𝐶𝑁𝑎𝑂𝐻 = 0,096 𝑁
0 𝑡
𝐶𝑁𝑎𝑂𝐻 −𝐶𝑁𝑎𝑂𝐻
Maka XA = 0
𝐶𝑁𝑎𝑂𝐻
0,1 𝑁 −0,096 𝑁
= 0,1 𝑁

= 0,036

Waktu Cᵗ NaOH
Ʌ (mS/cm) XA
(menit) (N)

0 3,68 0,1 0

2 3,71 0,096 0,036

4 4,18 0,041 0,593

6 4,09 0,051 0,486

8 4,13 0,047 0,534

9 4,11 0,049 0,510


Kurva Hubungan Konversi (Xa) terhadap
Konduktivitas Run 3
0.7
0.6
y = 1.186x - 4.3647
0.5 R² = 1
Konversi Xa

0.4
0.3
0.2
0.1
0
3.6 3.7 3.8 3.9 4 4.1 4.2 4.3
-0.1
Konduktivitas (mS/cm)
III. PEMBAHASAN
Praktikum Continou Stirrer Tank Reactor digunakan tangki yang dipasang seri.
Dan pengujian reaksi digunakan dengan bahan yang memiliki konsentrasi sama yaitu
0.1 N NaOH dan 0.1 N etitasetat. Reaktor ini memiliki sifat steady state pada aliran
umpan dan hasil yang tetap pada reaktan. Dan reaksi yang terjadi pada praktikum kali
ini memiliki persamaan seperti berikut :
CH3COOC2H5 + NaOH → CH3COONa + C2H5OH

Konduktivitas adalah ukuran seberapa kuat larutan dalam menghantarkan listrik .


Dalam larutan elektrolit terjadi karena adanya penghantaran ion dalam air. NaOH
merupakan elektrolit kuat sedangkan etil asetat merupakan larutan non elektrolit
sehingga nilai konduktivitas tertinggi terjadi saat t = 0.

Variasi laju alir yang diberikan akan mempengaruhi waktu reaksi . Semakin besar
bukaan semakin cepat waktu reaksi dan nilai konduktivitas semakin tinggi hal
tersebut membuktikan bahwa reaksi berlangsung semakin cepat. Variasi laju alir yang
digunakan adalah 50%, 70%, dan 90%
IV. KESIMPULAN

 Mekanisme reaksi yang terjadi adalah


CH3COOC2H5 + NaOH → CH3COONa + C2H5OH
 Semakin besar bukaan semakin cepat reaksi terjadi ditunjukan dengan waktu
steady statenya feed
 Konduktivitas terus berkurang sampai mencapai keadaan stabil ( steady state )
V. LAMPIRAN

You might also like