Scribd
Upload
1K views5 pages

Aluminum Alloy Composition Overview

The document provides the chemical composition ranges for various aluminum alloys. It lists the elemental composition limits for common alloying elements like silicon, iron, copper, manganese, magnesium and others. Over 30 different aluminum alloys are shown along with their allowed chemical composition specifications.

Uploaded by

Anonymous cgcKzFtX
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views5 pages

Aluminum Alloy Composition Overview

The document provides the chemical composition ranges for various aluminum alloys. It lists the elemental composition limits for common alloying elements like silicon, iron, copper, manganese, magnesium and others. Over 30 different aluminum alloys are shown along with their allowed chemical composition specifications.

Uploaded by

Anonymous cgcKzFtX
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

Aluminum Alloy Chemical Composition

Aluminum Alloy

Aluminum Alloy Chemical Composition

Alloy Si Fe Cu Mn Mg Ni Zn Sn Ti Pb Cr

AC1A 1.20max 0.40max 4.0-5.0 0.30max 0.20max 0.05max 0.30max 0.05max 0.25max 0.05max 0.05max

AC1B 0.20max 0.30max 4.2-5.0 0.10max 0.20-0.35 0.05max 0.10max 0.05max 0.05-0.30 0.05max 0.05max

AC2A 4.0-6.0 0.70max 3.0-4.5 0.55max 0.25max 0.30max 0.55max 0.05max 0.20max 0.15max 0.15max

AC2B 5.0-7.0 0.80max 2.0-4.0 0.50max 0.50max 0.35max 1.00max 0.10max 0.20max 0.20max 0.20max

AC3A 10.0-13.0 0.70max 0.25max 0.35max 0.15max 0.10max 0.30max 0.10max 0.20max 0.10max 0.15max

AC4A 8.0-10.0 0.40max 0.25max 0.3-0.6 0.35-0.60 0.10max 0.25max 0.05max 0.20max 0.10max 0.15max

AC4B 7.0-10.0 0.80max 2.0-4.0 0.50max 0.50max 0.35max 1.00max 0.10max 0.20max 0.20max 0.20max

AC4C 6.5-7.5 0.40max 0.25max 0.35max 0.25-0.45 0.10max 0.35max 0.05max 0.20max 0.10max 0.10max

AC4CH 6.5-7.5 0.17max 0.20max 0.10max 0.30-0.45 0.05max 0.10max 0.05max 0.20max 0.05max 0.05max

AC4D 4.5-5.5 0.50max 1.0-1.5 0.50max 0.45-0.60 0.20max 0.30max 0.05max 0.20max 0.10max 0.15max

AC5A 0.60max 0.70max 3.5-4.5 0.35max 1.30-1.80 1.7-2.3 0.15max 0.05max 0.20max 0.05max 0.15max

AC7A 0.20max 0.25max 0.10max 0.60max 3.60-5.50 0.05max 0.15max 0.05max 0.20max 0.05max 0.15max

AC8A 11.0-13.0 0.70max 0.8-1.3 0.15max 0.80-1.30 0.8-1.5 0.15max 0.05max 0.20max 0.05max 0.10max

AC8B 8.5-10.5 0.80max 2.0-4.0 0.50max 0.60-1.50 0.1-1.0 0.50max 0.10max 0.20max 0.10max 0.10max

AC8C 8.5-10.5 0.80max 2.0-4.0 0.50max 0.60-1.50 0.50max 0.50max 0.10max 0.20max 0.10max 0.10max

AC9A 22.0-24.0 0.70max 0.5-1.6 0.50max 0.60-1.50 0.5-1.5 0.20max 0.10max 0.20max 0.10max 0.10max

AC9B 18.0-22.0 0.70max 0.5-1.6 0.50max 0.60-1.50 0.5-1.5 0.20max 0.10max 0.20max 0.10max 0.10max

ADC1 11.0-13.0 0.9max 1.0max 0.3max 0.3max 0.5max 0.5max 0.1max

ADC3 9.0-10.0 0.9max 0.6max 0.3max 0.4-0.6 0.5max 0.5max 0.1max

ADC5 0.3max 1.1max 0.2max 0.3max 4.1-8.5 0.1max 0.1max 0.1max

ADC6 1.0max 0.6max 0.1max 0.4-0.6 2.6-4.0 0.1max 0.4max 0.1max

ADC10 7.5-9.5 0.9max 2.0-4.0 0.5max 0.3max 0.5max 1.0max 0.3max


ADC10Z 7.5-9.5 0.9max 2.0-4.0 0.5max 0.3max 0.5max 3.0max 0.3max

ADC12 9.6-12.0 0.9max 1.5-3.5 0.5max 0.3max 0.5max 1.0max 0.3max

ADC12Z 9.6-12.0 0.9max 1.5-3.5 0.5max 0.3max 0.5max 3.0max 0.3max

ADC14 16.0-18.0 0.9max 4.0-5.0 0.5max 0.50-0.65 0.3max 1.5max 0.3max

Alloy Si Fe Cu Mn Mg Ni Zn Sn Ti Pb Cr

ZL101A 6.5-7.5 0.2max 0.1max 0.1max 0.25-0.45 0.1max 0.01max 0.08-0.2 0.03max

ZL102 10-13 0.7max 0.3max 0.5max 0.1max 0.1max 0.2max

ZL104 8-10.5 0.6max 0.1max 0.2-0.5 0.17-0.30 0.2-0.5 0.25max 0.01max 0.15max 0.05max

ZL106 7.5-8.5 0.6max 1.0-1.5 0.3-0.5 0.3-0.5 0.2max 0.01max 0.1-0.25 0.05max

ZL107 6.5-7.5 0.5max 3.5-4.5 0.5max 0.1max 0.3max 0.01max 0.05max

ZL108 11-13 0.7max 1.0-2.0 0.3-0.9 0.4-1.0 0.3max 0.2max 0.01max 0.2max 0.05max

ZL109 11-13 0.7max 0.5-1.5 0.2max 0.8-1.3 0.8-1.5 0.2max 0.01max 0.20max 0.05max

ZL201 0.3max 0.3max 4.5-5.3 0.6-1.0 0.05max 0.1max 0.2max 0.15-0.35

YL102 10-13 1.2max 0.6max 0.6max 0.05max 0.3max

YL104 8.5-10.5 1.0max 0.3max 0.2-0.5 0.17-0.3 0.3max 0.01max 0.05max

YL108 11-13 1.0max 1.0-2.0 0.3-0.9 0.4-1.0 0.05max 1.0max 0.01max 0.05max

YL112 7.5-9.5 1.2max 3.0-4.0 0.5max 0.3max 0.5max 1.2max 0.1max 0.10max

YL113 9.6-12 1.2max 1.5-3.5 0.5max 0.3max 0.5max 1.0max 0.1max 0.10max

YL117 16-18 1.2max 4.5-5.0 0.5max 0.45-0.65 0.1max 1.2max 0.1max

YL302 0.8-1.3 1.2max 0.1max 0.1-0.4 4.5-5.5 0.2max 0.2max

DIN226 8.0-11.0 1.0max 2.0-3.5 01.-0.4 0.1-0.5 0.3max 1.2max 0.1max 0.15max 0.2max

356.1 6.5-7.5 0.5max 0.25max 0.35max 0.25-0.45 0.35max 0.25max

360.1 9.0-10.0 1.0max 0.6max 0.35max 0.45-0.6 0.5max 0.4max 0.15max

380.1 7.5-9.5 1.0max 3.0-4.0 0.5max 0.1max 0.5max 2.9max 0.35max

383.1 9.5-11.5 1.0max 2.0-3.0 0.5max 0.1max 0.3max 2.9max 0.15max

413.1 11-13 1.0max 1.0max 0.35max 0.1max 0.5max 0.4max 0.15max

413.2 11-13 0.6max 0.1max 0.05max 0.05max 0.05max 0.05max 0.05max

Aluminum Alloy Chemical Composition

Alloy Si Fe Cu Mn Mg Ni Zn Sn Ti Pb Cr

LM2 9.0-11.5 1.0max 0.7-2.5 0.50max 0.3max 0.5max 2.0max 0.20max 0.2max 0.30max

LM4 4.0-6.0 0.8max 2.0-4.0 0.2-0.6 0.15max 0.3max 0.5max 0.10max 0.2max 0.10max
LM5 0.3max 0.6max 0.1max 0.3-0.7 3.0-6.0 0.1max 0.1max 0.05max 0.2max 0.05max

LM6 10.0-13.0 0.6max 0.1max 0.5max 0.1max 0.1max 0.1max 0.05max 0.2max 0.10max

LM9 10.0-13.0 0.6max 0.1max 0.3-0.7 0.2-0.6 0.1max 0.1max 0.05max 0.2max 0.10max

LM10 0.25max 0.35max 0.1max 0.1max 9.5-11 0.1max 0.1max 0.05max 0.2max 0.05max

LM12 2.5max 1.0max 9.0-11 0.6max 0.2-0.4 0.5max 0.8max 0.10max 0.2max 0.10max

LM13 10.0-12.0 1.0max 0.7-1.5 0.5max 0.8-1.5 1.5max 0.5max 0.10max 0.2max 0.10max

LM16 4.5-5.5 0.6max 1.0-1.5 0.5max 0.4-0.6 0.25max 0.1max 0.05max 0.2max 0.10max

LM18 4.5-6.0 0.6max 0.1max 0.5max 0.1max 0.1max 0.1max 0.05max 0.2max 0.10max

LM20 10.0-13.0 1.0max 0.4max 0.5max 0.2max 0.1max 0.2max 0.10max 0.2max 0.10max

LM21 5.0-7.0 1.0max 3.0-5.0 0.2-0.6 0.1-0.3 0.3max 2.0max 0.10max 0.2max 0.20max

LM22 4.0-6.0 0.6max 2.8-3.8 0.2-0.6 0.05max 0.15max 0.15max 0.05max 0.2max 0.10max

LM24 7.5-9.5 1.3max 3.0-4.0 0.5max 0.3max 0.5max 3.0max 0.20max 0.2max 0.30max

LM25 6.5-7.5 0.5max 0.1max 0.3max 0.2-0.45 0.1max 0.1max 0.05max 0.2max 0.10max

LM26 8.5-10.5 1.2max 2.0-4.0 0.5max 0.5-1.5 1.0max 1.0max 0.10max 0.2max 0.20max

LM27 6.0-8.0 0.8max 1.5-2.5 0.2-0.6 0.3max 0.3max 1.0max 0.10max 0.2max 0.20max

LM28 17-20 0.7max 1.3-1.8 0.6max 0.8-1.5 0.8-1.5 0.2max

Mechanical Properties Aluminum Pipes


Aluminum pipes and mechanical properties like tensile
strength. yield strength and more
Sponsored Links

Mechanical properties for some aluminum alloys are indicated below:

Elastic Modulus Shear Modulus


Yield Strength Tensile Strength
Alloy Temper -E- -G-
6
(103 psi) (103 psi)
(10 psi) (106 psi)

1100 10.0 3.75 3.5 11

1100 H12 10.0 3.75 11 14

2014 10.8 4.00 8 22

2014 T6 10.6 4.00 58 66


2014 T62 10.8 4.00 59 67

2017 T4 10.5 3.95 32 55

2024 T3 10.6 4.00 42 64

2024 T4 10.6 4.00 40 62

2025 T6 10.4 3.90 33 52

2124 T851 10.4 4.00 57 66

2219 T62 10.5 4.00 36 54

2618 T61 10.7 4.10 42 55

3003 10.0 3.75 5 14

3003 H18 10.0 3.75 25 27

3003 H112 10.0 3.75 10 17

354 T61 10.6 4.00 36 47

355 T51 10.2 3.80 22 27

355 T6 10.3 3.80 23 37

356 T7 10.3 3.85 21 29

356 T6 10.3 3.85 20 30

5052 10.2 3.80 9.5 25

5052 H32 10.2 3.80 23 31

5056 H38 10.3 3.75 50 60

5056 ANL 10.3 4.00 22 42

6061 T4 10.0 3.80 16 30


6061 T6 10.0 3.80 35 42

6062 10.0 3.75 5 14

6062 T4 10.0 3.75 16 26

6062 T6 10.0 3.75 35 38

6063 T42 10.0 3.75 10 17

6063 T5 10.0 3.75 16 22

6063 T6 10.0 3.75 25 30

6151 T6 10.1 3.85 37 44

7075 T6 10.4 3.90 70 78

A356 T61 10.4 3.90 28 38

D712 T5 10.3 3.80 20 32

Component Amount (wt.%)


Aluminium Balance
Magnesium 0.8-1.2
Silicon 0.4 – 0.8
Iron Max. 0.7
Copper 0.15-0.40
Zinc Max. 0.25
Titanium Max. 0.15
Manganese Max. 0.15
Chromium 0.04-0.35
Others 0.05

You might also like