Scribd
Upload
87 views1 page

Piezoresistive Pressure Transmitters Overview

The Series 22 M and S piezoresistive pressure transmitters offer a reliable and cost-effective solution for medium to high volume applications. They use an automatic brazing process without internal seals or O-rings for low-cost production. The Series 22 M has a brass housing with a steel insert and nickel diaphragm brazed in, while the Series 22 S uses all stainless steel. They are designed for wide temperature ranges suitable for automotive, hydraulic, and refrigeration uses.

Uploaded by

Saša Pejčić
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views1 page

Piezoresistive Pressure Transmitters Overview

The Series 22 M and S piezoresistive pressure transmitters offer a reliable and cost-effective solution for medium to high volume applications. They use an automatic brazing process without internal seals or O-rings for low-cost production. The Series 22 M has a brass housing with a steel insert and nickel diaphragm brazed in, while the Series 22 S uses all stainless steel. They are designed for wide temperature ranges suitable for automotive, hydraulic, and refrigeration uses.

Uploaded by

Saša Pejčić
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Piezoresistive Pressure Transmitters Series 22 M (Brass)

high volume / low cost / automotive and industrial applications Series 22 S (Steel)
Series 22 offers a reliable cost effective solution for customers requiring medium to high
­quantities, of mass produced transmitters. Utilising the KELLER automatic brazing lines, this
new technology allows crevice-free construction of the pressure port with no internal seals or
O-rings, making possible high volumes at low cost. In the brass 22 M, a steel insert and a nickel
diaphragm are brazed into a brass housing. In the steel 22 S, all parts are stainless steel (AISI
316 L). The glass feed-through header and silicon pressure sensor are welded to the steel insert
underneath the oil filling.
The electronic circuit is fitted to the Packard plug. EMC-protection-components are mounted on
the plug side, the amplifier on the sensor side. A flexible printed circuit “TAB” connects the sensor Series 22 M
with the electronics. The transmitters are designed to have exceptionally good EMC ratings and 3/8”-24 UNF-2A

operate over a wide temperature band, ideal for automotive, hydraulic and refrigeration control
applications.

Specifications Pressure Ranges


PAA-22 M / PAA-22 S 5 10 20 30 bar
PA-22 M / PA-22 S 5 10 20 30 50 100 200 250 bar
Overpressure 15 30 60 90 150 250 300 300 bar
PAA: Absolute. Zero at vacuum PA: Sealed Gauge. 1000 mbar absolute

Type 2-Wire 3-Wire


Supply 8…28 V 5 V ± 0,25 V
Output 4…20 mA 0,5 V…4,5 V ratiometric
Accuracy (Comp. Temp.-Range) ± 1 %FS (0…50 °C) Series 22 S
± 2 %FS (0…80 °C) 7/16”-20 UNF
± 4 %FS (-40…125 °C)
Isolation > 10 MΩ @ 50 VDC
Vibration / Shock 10 g / 5…2000 Hz, axes X/Y/Z / 20 g sine 11 ms
Response Time (0…99%) < 10 msec
Pressure Connection 3/8”-24 UNF-2A (with O-ring*), 7/16”-20 UNF (female),
G1/4” (with O-ring*)
EMC EN 61000-6-1 to -6-4 / EN 61326-2-3
Homologation E4-110R, E4-10R and E4-67R
(Homologation applies only to selected and authorised products)
Protection IP67
Weight ≈ 40 g
Options Intermediate ranges, customer-specific housings, Series 22 S
G1/4”
mating plug with cable
*oil and water resistant

Electrical Connections
16,5
16,5
16,5

Compatible with Packard-Plug


Type 12065286

GND
50,5

ca. 20
ca. 20
51

ø 21
55,5

ø 21 + OUT
ø 21
ca. 27

HEX 17 HEX 17
7
7

11,5

+ VCC
8,5
8,4
7,6

HEX 22
7

12

Series 22 M Series 22 S Series 22 S


3/8”-24 UNF-2A 7/16”-20 UNF G1/4”

KELLER AG für Druckmesstechnik KELLER Ges. für Druckmesstechnik mbH Edition 09/2015
CH-8404 Winterthur D-79798 Jestetten Subject to alterations
+41 52 235 25 25 +49 7745 9214 0 Companies approved to ISO 9001
info@[Link] eurocenter@[Link] [Link]

You might also like