Scribd
Upload
332 views4 pages

XK3Y Setup for Hitachi & Liteon Drives

This 3-step guide shows how to configure an XK3Y device for use with Hitachi & Liteon 16D5S slim Xbox consoles. It involves: 1) Creating cpu.txt and dvd.txt files containing the console's CPU and DVD keys extracted during the RGH process. 2) Extracting the fcrt_enc.bin file from the NAND dump using Nand Flash Tool. 3) Creating a 0500.txt, 0502.txt or 1175.txt file to specify the drive type, and copying all files to the XK3Y SD card.

Uploaded by

Numa Key Luma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
332 views4 pages

XK3Y Setup for Hitachi & Liteon Drives

This 3-step guide shows how to configure an XK3Y device for use with Hitachi & Liteon 16D5S slim Xbox consoles. It involves: 1) Creating cpu.txt and dvd.txt files containing the console's CPU and DVD keys extracted during the RGH process. 2) Extracting the fcrt_enc.bin file from the NAND dump using Nand Flash Tool. 3) Creating a 0500.txt, 0502.txt or 1175.txt file to specify the drive type, and copying all files to the XK3Y SD card.

Uploaded by

Numa Key Luma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

XK3Y Guide for Hitachi & Liteon 16D5S Drives

This guide shows you how to configure your XK3Y for use with Hitachi & Liteon 16D5S Slim Xbox
consoles.

Step 1 RGH
Many guides to performing the RGH are available on the internet. Boot Xell and obtain your CPU and
DVD keys. You should also a dump of your Xbox’s NAND flash during the RGH process.

Step 2 Create the Keys Files


Use notepad to create a new file, copy in your CPU key, save the file as ‘’[Link]”

Use notepad to create a new file, copy in your DVD key, save the file as ‘’[Link]”

Make a note of the directory where you have saved these files
Step 3 Extract the FWCRT File
Start “Nand Flash Tool” v0.97 and load your Xbox NAND dump file. Click on the “Extract” button,
select the “Generic Files”

Then select “Generic Files”, “Firmware Challenge Response Table”. Click OK and browse to the folder
where you saved the [Link] and [Link] files. Click OK and Nand Flash Tool will create a folder called
“GenericFiles”, inside it you will find a file called “fcrt_enc.bin”. Copy “fcrt_enc.bin” to the parent
folder and delete the “GenericFiles” folder.
Step 4 Configure Your Drive Type
Open Explorer and browse to the folder that contains the [Link], [Link] and fcrt_enc.bin.

If you have a Hitachi 0500 revision drive, create an empty text file called “[Link]”

If you have a Hitachi 0502 revision drive, create an empty text file called “[Link]”

If you have a Liteon 16D5S drive, create an empty text file called “[Link]”
You should now have four files. Copy the files to your XK3Y SD card, be sure to “safely remove” the
SD card.

You might also like