Scribd
Upload
58 views1 page

Embossing Material Specs Guide

The document provides specifications for double and single embossing processes including the thickness of materials, baking/cooling mould thicknesses, and Z heights to be maintained for different material thickness combinations. For double embossing, the thickness of materials ranges from 1/1 mm to 1.5/1.5 mm while the baking mould thickness is 2mm and Z heights range from 4.5mm to 5.5mm. Single embossing specifications are provided for aluminum plates that are 3mm and 4mm thick, with material thickness combinations from 0.8/2mm to 1.5/8mm, a cooling mould thickness of 6mm, and Z heights ranging from 12mm to 19.5

Uploaded by

Perminder Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
58 views1 page

Embossing Material Specs Guide

The document provides specifications for double and single embossing processes including the thickness of materials, baking/cooling mould thicknesses, and Z heights to be maintained for different material thickness combinations. For double embossing, the thickness of materials ranges from 1/1 mm to 1.5/1.5 mm while the baking mould thickness is 2mm and Z heights range from 4.5mm to 5.5mm. Single embossing specifications are provided for aluminum plates that are 3mm and 4mm thick, with material thickness combinations from 0.8/2mm to 1.5/8mm, a cooling mould thickness of 6mm, and Z heights ranging from 12mm to 19.5

Uploaded by

Perminder Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd

Double Emboss

Thickness of Material 1/1 mm 1.2/1.2 mm 1.5/1.5 mm


Baking Mould Thickness 2mm 2mm 2mm
Z Height to be maintained 4.5mm 5mm 5.5mm

Single Emboss For Aluminium Plate 3.0 mm


Thickness of Material 0.8/2 mm 1.0/3.0 mm 1.0/4.0 mm 1.2/4.0 mm 1.2/5.0 mm 1.2/6 mm 1.2/8 mm 1.5/4 mm 1.5/5 mm 1.5/6 mm 1.5/8 mm
Cooling Mould Thickness 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm
Z Height to be maintained 12 mm 13 mm 14 mm 14.2 mm 15.2 mm 16.2 mm 18.2 mm 14.5 mm 15.5 mm 16.5 mm 18.5 mm

Single Emboss For Aluminium Plate 4.0 mm


Thickness Of Material 0.8/2 mm 1.0/3.0 mm 1.0/4.0 mm 1.2/4.0 mm 1.2/5.0 mm 1.2/6 mm 1.2/8 mm 1.5/4 mm 1.5/5 mm 1.5/6 mm 1.5/8 mm
Cooling Mould Thickness 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm 6.0 mm
Z Height to be maintained 13 mm 14 mm 15 mm 15.2 mm 16.2 mm 17.2 mm 19.2 mm 15.5 mm 16.5 mm 17.5 mm 19.5 mm

Note: If Baking Mould Thickness is used then as actual Z Height shall be maintained.

You might also like