1
SNEP Linear S+
Datasheet
Mechanical properties
Protection class I
Degree of protection IP44 / IP64
IK-classification IK08
Operating temperature -25…+40 °C
-40…+50 °C (Industry)
Body structure / other technical information Frame aluminium profile, ends durable and fire-retardant V-0-fire
classificated PC-plastic.
General information / product information SNEP Linear S + is the latest addition to the S-luminaire family. The cost-
effective general lighting fits especially for lattice installations in renovation
and new buildings. The recycled aluminum body removes heat from the
electronic components of the luminaire and applications vary depending
on the chosen optic options, including from shelf spaces to the production
spaces. The Linear S +, which meets the requirements of the sporting ballast
test (DIN 18032-3), is also suitable for sports facilities and coupling options
make installation easy. Lighting is manufactured in Finland.
Diffuser / optics Optical diffuser, high efficiency optical cover micro prism, clear or satin PC.
Mounting Ceiling, lighting suspension rail, cable, suspended or with adjustable ramp
bracket. Installation kits available separately.
Sähkötekniset ominaisuudet
Voltage 220 - 240 V
Frequency 50 / 60 Hz
Power 54 / 68 / 88 W
Control / dimming On/off, DALI
Light source LED
Electrical connection ** Quick connector or preassembled connection cable (3x1,5mm2/5x2,5mm2)
Power factor > 0,95
Luminaire lifespan * L80B50 100.000 h
Failure rate * 100.000h /10%
* In normal room temperature Ta +25°C
** Also available with different types of cables, lengths, connectors and through-wirings
Not to be installed in condensing environments
There is a ± 5 % tolerance in output power and luminous flux
Measurements
A B
A 1510 mm
B 85 mm C
C 75 mm D
D 1550 mm
Weight 3,7 kg
17/10/18 All rights reserved Purso Lighting Systems | tel. +358 3 3404111 | snep@[Link] | [Link]
2
SNEP Linear S+
Product number
1 LED
properties 2 Optical
properties 3 Mechanical
properties
8 30
Minimum Colour
P1 C 44 S
Degree of
Optics Optical cover Colour
CRI temperature protection
LED options Light distributions Degree of protection options
830 = CRI min. 80 typ. 85, Polarised light distributions can be 44 = IP44 Protection against
CCT 3000K found at the end of this datasheet. object sized over a 1mm
and splashing of water
840 = CRI min. 80 typ. 85, P1C = High efficiency optical diffuser
CCT 4000K and clear cover 64 = IP64 Cover against
dust and splashing water
850 = CRI min. 80 typ. 85, P1M = High efficiency optical diffuser
CCT 5000K and micro prism cover
P1S = High efficiency optical diffuser
and satin cover Colour options
S = Anodised grey
4 Electrical
properties
56 Power
1
Connection type
1
Cable length
0
Connector
0
Electronics
Power options Cable length options Connector options
56 = 54W 0 = no cable 0 = No connector
70 = 68W 1 = 1,5m 1 = Wago Winsta (IP 20)
90 = 88W 2 = 4m 2 = Enstonet (IP 20)
Through-wiring (*) 3 = Schuko plug
3 = 1,5m+1,9m
4 = 2,4m+1,9m
5 = 1,5m+3,9m
Connection options 6 = 1,5m+0,9m Control options
*The stated cable lengths are the actual
0. Quick connection Phoenix QPD 3x1,0-1,5mm² lengths that the cable comes out of the 0 = No control
luminaire (±0,1 m)
1. Connection cable from end (MSK) 1,5mm² 2 = DALI
3. Rubber cable from end (VSKB) 1,5mm² 4 = Industrial (-40…+50°C)
4. Connection cable through-wiring (MSK) 2,5mm² 5 = Industrial DALI (-40…+50°C)
5. Connection cable through-wiring (VSKB) 2,5mm²
6. Quick connection through-wiring 5x1,5-2,5mm²
7. Connection cover 5x2,5mm²
8. Connection cover through-wiring 5x2,5mm²
Every combination is not possible
17/10/18 All rights reserved Purso Lighting Systems | tel. +358 3 3404111 | snep@[Link] | [Link]
3
SNEP Linear S+
Standard products
Linear S+ Vakiotuotteet
Degree of Operating Luminous flux
Type IK-class Optics Power
protection temperatre (luminaire)
SNEP Linear S+ 840-P1C-44S-701100 IP44 -25…+40°C IK08 P1C 68W 11180 lm
SNEP Linear S+ 840-P1M-44S-701100 IP44 -25…+40°C IK08 P1M 68W 9960 lm
SNEP Linear S+ 840-P1S-44S-701100 IP44 -25…+40°C IK08 P1S 68W 10820 lm
SNEP Linear S+ 840-P1S-44S-901100 IP44 -25…+40°C IK08 P1S 88W 12930 lm
Luminous flux persistence
Luminous flux persistance [%]
Linear S+ 54 W Ta 25 °C
Linear S+ 54 W Ta 40 °C
LED-module lifetime [h]
Light distribution charts
P1C P1M P1S
17/10/18 All rights reserved Purso Lighting Systems | tel. +358 3 3404111 | snep@[Link] | [Link]
4
SNEP Linear S+
Datasheet
P1C
Colour temperature Luminous flux lm Luminous efficacy lm/W
Power W CRI (Ra)
(CCT) (luminaire) (luminaire)
54 3000K typ. 85 8590 159
54 4000K typ. 85 8950 166
54 5000K typ. 85 9200 170
68 3000K typ. 85 10710 158
68 4000K typ. 85 11180 164
68 5000K typ. 85 11490 169
88 3000K typ. 85 12820 146
88 4000K typ. 85 13370 152
88 5000K typ. 85 13730 156
P1M
Colour temperature Luminous flux lm Luminous efficacy lm/W
Power W CRI (Ra)
(CCT) (luminaire) (luminaire)
54 3000K typ. 85 7660 142
54 4000K typ. 85 7980 148
54 5000K typ. 85 8200 152
68 3000K typ. 85 9560 141
68 4000K typ. 85 9960 146
68 5000K typ. 85 10230 150
88 3000K typ. 85 11430 130
88 4000K typ. 85 11920 135
88 5000K typ. 85 12240 139
P1S
Colour temperature Luminous flux lm Luminous efficacy lm/W
Power W CRI (Ra)
(CCT) (luminaire) (luminaire)
54 3000K typ. 85 8310 154
54 4000K typ. 85 8660 160
54 5000K typ. 85 8900 165
68 3000K typ. 85 10370 153
68 4000K typ. 85 10820 159
68 5000K typ. 85 11100 163
88 3000K typ. 85 12410 141
88 4000K typ. 85 12930 147
88 5000K typ. 85 13280 151
17/10/18 All rights reserved Purso Lighting Systems | tel. +358 3 3404111 | snep@[Link] | [Link]
