Product Brochure NDT Equipment
Pundit 250 Array
The Pundit 250 Array is the latest development in
Ultrasonic Pulse Echo equipment from Proceq. This unit
combines an 8 channel shear wave transducer array with
the industry leading Pundit Touchscreen controller, the
probe can also be upgraded to 16 channel by combining
two transducer arrays. The Pundit 250 Array is available
as a unit with touchscreen controller or as an upgrade to
any Pundit PL unit.
Ultrasonic Pulse Echo Method
The Pulse Echo technology widely extends the application
range of the Pundit Touchscreen Unit and offers a variety
of special features.
Scan Modes Applications
Real Time B-Scan
Thickness measurement of elements up to
approximately 1m
Location of defect such as honeycombing,
voiding and the depth and extent of concrete
delamination.
Detection of embedments such as pipes,
tendon ducts beneath a layer of rebar
Location of objects and defects in fibre
reinforced concrete
Panorama B-Scan
Features
Durable ceramic contact points on dry contact
transducers
Superior near field performance [Detection of
objects and embedments close to test
subject's surface]
Upgradeable to a 16 channel array with 2
probe units
Single or double handle configurations
System control buttons on handles and probe
Other Compatible Pundit Sensors
for quick single operator use
The Pundit touchscreen is also compatible with the Single
Raw data export
Channel UPE transducer and Proceq's range of Ultrasonic
Real Time B Scan updates
Pulse Velocity transducers, the links below discuss the
Extended B scan panoramas
relevant systems:
Automatic estimation of the Pulse Velocity or
Pundit PL 200 - Ultrasonic Pulse Velocity
calibration to a known thickness
Pundit PL-200 PE – Single Channel Ultrasonic Pulse
Echo
Perth: 0408 034 668 Melbourne: 0428 315 502 Auckland: 64 274 738758
Sydney: 0418 381 709 Brisbane: 0419 477 715
[Link] [Link]
Product Brochure NDT Equipment
Pundit 250 Array
Transducer Specifications
The Pundit Array transducer is a rugged and lightweight 8
Technical Specifications
channel array of shear wave transducers. One channel Pundit Array Transducer
will transmit a sonic pulse the remaining 7 receive, this
Gain 0 to 80 dB
measurement is repeated for each channel transmitting
in turn. The 56 A-Scan signals are mapped using Synthetic Analog bandwidth 15 to 100 kHz
Aperture into a B-Scan Image like the examples above, Nominal transducer 50 kHz shear wave
showing information on changes in material such as the frequency
back surface of a slab, embedments or defects internal to Range / resolution 0 to 1000 us / 1 us
it. Pulse voltage ± 150 V
Pulse shape Square wave
Pulse delay 8 to 200 ms
Number of channels 8 [Upgrade to 16]
Battery lifetime > 7 hours
Dimensions (mm) 240 x 273 x 153
Weight 3 kg approx.
Pundit Touchscreen
Display 7 " colour display, 800 x
Form Supplied 480 pixels
Pundit 250 Array Memory Internal 8 GB flash
Pundit Touchscreen memory
Pundit Array Transducer Regional settings Metric and imperial units,
Pundit 250 Array Software multi language
Pundit Array cable, 12 pin 1.5 m Power input 12 V ± 25 % / 1.5 A
Pundit Array Contact Tester Battery 3.6 V, 14 Ah
Rechargeable batteries, power supply Battery lifetime > 8 hours
USB cable Humidity <95 % RH, non condensing
Calibrated tape, DVD with software
Operating -10 to + 50 °C
Documentation temperature
Carrying Strap and Carry Case
IP Classification IP 54
Upgrade Kit to 250 Array Dimensions 250 x 162 x 62 mm
Pundit Array Transducer Weight 1.5 kg aprox
Pundit 250 Array Software
Pundit Array cable, 12 pin 1.5 m About PCTE
Pundit Array Contact Tester
Rechargeable Batteries PCTE have over 30 years’ experience in the
Calibrated tape, DVD with software, documentation measurement and testing of construction
Carry Case materials. PCTE can provide more than just the
equipment, they can provide expert training.
Accessories PCTE have a service centre in Sydney in which
Pundit array transducer battery pack complete they can provide calibration, repairs and
Rechargeable batteries warranty repairs.
Calibrated tape [5 pack]
Perth: 0408 034 668 Melbourne: 0428 315 502 Auckland: 64 274 738758
Sydney: 0418 381 709 Brisbane: 0419 477 715
[Link] [Link]
