PERFORMANCE TEST
SPECIFIC INSTRUCTION FOR THE CANDIDATE
QUALIFICATION : ELECTRONIC PRODUCTS ASSEMBLY AND
SERVICING NCII
COC 1 Title : ASSEMBLE ELECTRONIC PRODUCTS
PLEASE READ CAREFULLY:
Given the necessary tools, materials and equipment, you are required to assemble electronic
products in accordance with accepted institutional/industry standard. (Allotted time: 4 hours)
1.
LIST OF EQUIPMENT, TOOLS AND MATERIALS
EQUIPMENT
QTY Description
1 unit Multimeter (analog/digital)
1 set ESD free work bench with mirror Back-to-back/one-sided
1 set High grade magnifying glass with lamp
1 unit Variable power supply
1 unit Variable transformer
1 unit Hot air soldering station
1 unit Oscilloscope, digital
1 unit Signal generator
1 unit Function generator
1 unit Table top reflow oven
1 unit Lead-free soldering system
SUPPLIES AND MATERIALS
1 spool Soldering wire
50 ml SMD soldering paste
500 ml SMD soldering flux
1 pc. Cleaning brush
1 bottle Thinner/alcohol
5ml Thermal paste
1 bottle Ferric chloride
5 units Pale or water bucket
5m Stranded/solid/ hook-up wires
10m wire stranded, #22, red
10m wire stranded, #22, black
10m wire stranded, #22, white
10m wire stranded, #22, blue
10m wire stranded, #22, yellow
10m wire stranded, #22, green
10m Solid wires, assorted color
1 set Assorted electronic components
50 pcs resistors (different values)
50 pcs capacitors (different values)
TOOLS
1 set Pliers assorted, Long nose, Side cutter
1 set Screw driver assorted, Phillips, slotted
1 set Desoldering tools
1 set Wrenches assorted
1 set Allen wrench/key
1 pc Utility knife/stripper
1 set Test jigs
1 pc Wire stripper
1 pc Digital micrometer
1 pc Anti-static strap
1 pc Anti-static brush
1pc Anti-static mat
1 set Bread boards
1 set Pliers assorted, Long nose, Side cutter
PERFORMANCE CRITERIA CHECKLIST
Trainee’s Name: Date:
CRITERIA YES NO
1. Does electronic components for assembly prepared in
accordance with OH&S policies and procedures?
2. Does the printed circuit board modules prepared/made following
acceptable methods and standard?
3. Does the electronic components mounted and soldered in
accordance with soldering principle?
4. Is the assembling electronic components are performed in
accordance with OH&S policies and work instructions?
5. Is the assembled electronic products tested and inspected in
accordance with quality standards, procedures and
requirements?
6. Are safety rules and procedures applied?
Comments/Suggestions:
Trainer: MIANNEWALLY M. AGBAYANI Date:
