Scribd
Upload
121 views2 pages

KH-Villa Footing Design Details

This document summarizes the design of a spread footing. Key details include: - The footing is 1.7m x 1.7m x 0.25m thick and designed to support a column load of 42.657 tons. - Calculations check that the ultimate and factored soil pressures are less than the permissible pressure. Shear and moment capacities are also checked. - Reinforcements of 7 bars of 14mm diameter bars spaced at 0.258m are selected for both directions to resist the bending moments. Bond stresses are checked to be within limits.

Uploaded by

lavy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
121 views2 pages

KH-Villa Footing Design Details

This document summarizes the design of a spread footing. Key details include: - The footing is 1.7m x 1.7m x 0.25m thick and designed to support a column load of 42.657 tons. - Calculations check that the ultimate and factored soil pressures are less than the permissible pressure. Shear and moment capacities are also checked. - Reinforcements of 7 bars of 14mm diameter bars spaced at 0.258m are selected for both directions to resist the bending moments. Bond stresses are checked to be within limits.

Uploaded by

lavy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

>>>>> DESIGN OF SPREAD FOOTING

DESIGN CRITERIA Project : KH-VILLA Developer : Natthawit J.

fc' = 200 ksc. Footing : F1 Engineer : LON LAVY

fy = 4000 ksc. Filename : FOOTING2-SDM Date : July 29, 2019

PD = 23.390 ton. MD = 0.000 ton-m. Load Factor, LFD = 1.40


PL = 5.830 ton. ML = 0.000 ton-m. LFL = 1.70

Column load, Pu = 42.657 ton. Column section Pu = 42.657 ton.

Mu = 0.000 ton-m. b = 0.40 m.


Mu = . ton-m.

e = - m. h = 0.40 m. 0.50 ton/sq.m.

Footing size, S = 1.70 m.


L = 1.70 m.
Thk = 0.25 m.

Cov dc = 0.075 m.

Permissible soil pressure (qa) = 13.5 ton/sq.m.

0.25 m.
L = 1.70 m.
Factor of Safety (FS) = 3.0

Ultimate soil pressure (qult) = 40.5 ton/sq.m. 14.76 ton/sq.m. 14.76 ton/sq.m.
14.76 ton/sq.m. qnu = 14.76 ton/sq.m.
Surcharge = 0.500 ton/sq.m.
Soil pressure above footing = 2.000 ton/sq.m. Reinforcements
Total pressure under footing (q) = 13.211 ton/sq.m. OK Bar of long dir. = 14 mm. Average d = 0.161 m.

Factored soil pressure (qnu) = 14.760 ton/sq.m. Bar of short dir. = 14 mm. ɸMc = 12.342 ton-m / m width

= 14.760 ton/sq.m.

· Check two-way shear Calculation zone :

p(+d/2) = 14.760 ton/sq.m. b1 = 0.85 bc = 1.00

p(-d/2) = 14.760 ton/sq.m. rmin = 0.0018 b+d = 0.561 m.

Vup = 38.012 ton. rmax = ####### h+d = 0.561 m.

Mup = 0.000 ton-m. ɸm = 0.90 bᴏ = 2.244 m.

ɸVc = 46.04 ton. OK ɸv = 0.85 Jc = m4

vu,max = 10.52 ksc. OK ɸvc = 6.37 ksc. ɸvc2 = 15.81 ksc.

vu,min = 10.52 ksc. OK ɸvc1 = 19.47 ksc. ɸvc3 = 12.74 ksc.


· Check beam action shears
- Short panel p(+d) = 14.760 ton/sq.m. - Long panel avg.p(d) = 14.760 ton/sq.m.

Vu = 12.270 ton. Vu = 12.270 ton.

ɸVc = 17.44 ton. OK ɸVc = 17.44 ton. OK

· Reinforcements
- Long direction p(+b/2) = 14.760 ton/sq.m. - Short direction
MUS = 5.301 ton-m. MUL = 5.301 ton-m.

As = 9.54 [Link]. -- OK As = 9.54 [Link]. -- OK

As,min = 7.65 [Link]. As,min = 7.65 [Link].

Select : 7-DB14 @ 0.258 m Select : 7-DB14 @ 0.258 m


· Check bond stresses
- Reinforcement in long direction - Reinforcement in short direction

- Embedded length Lbd = 26.12 cm. < 57.5 m. OK Lbd = 26.12 cm. < 57.5 m. OK

7-DB14
7-DB14

L = 1.70 m. 0.25 m.
Remark Steel Bar on Short Direction 7-DB14 Total Amount No Need to Follow With Red Mark

You might also like