Smart Laser Sensor
E3NC Series
• Precise Laser spot of min. 0.8 mm
• Independency of color or surface structure
• Adjustable focus and line beam
• EtherCAT connectivity
Accessories (Sold Separately) Presence E3NC-L series of Compact Laser Sensors
Lens Attachments
E39-P51 (For E3NC-LH03 Retro-reflective Models)
E39-P52 (For E3NC-LH02 Diffuse-reflective Models)
Handle Even More
E3NC-L series
Applications with
a Line Beam
Approx. 52 mm
(at 600 mm)
Approx. 50 mm
(at 500 mm)
Approx. 25 mm
E3NC-LH02+
(at 250 mm)
E39-P52
And, Convenient!
PAT.P
Select the Line Beam Shape
You can mount a Lens Attachment to the
E3NC-LH02 and adjust the spot to create
E3NC-LH03+ various shapes of line beams. Adjusting the
E39-P51 beam shape to the workpiece enables even
more-stable detection.
Rubber Packing
The Lens Attachments have internal rubber
Vertical line Vertical Horizontal Horizontal
packings to reduce the entry of dirt between ellipse ellipse line
the Sensor Head and Lens Attachment. Line beam shapes
Application
Presence Detection of Detection of Presence Detection of
Powders or Liquids Faulty Cap Assembly Rubber Sheets
With a wider beam, you can stably detect Using a line beam allows you to detect caps that The wide sensing area helps eliminate the
powders and liquids because they are less likely are not attached correctly with only one Sensor. influences of color differences in the rubber sheet
to fall outside of the beam. to enable stable detection.
10
Presence Detection
Laser Amplifier Units E3NC-LA
Laser Amplifier Units (CMOS Type) E3NC-SA
Consistent Operating Methods for All N-Smart Amplifier Units.
E3NC-L series
White Display Characters for High Visibility.
Select the Best Tuning Method
According to the Application
Smart Tuning
Basic Tuning High-speed Workpieces Additional High-precision
Common
Functions
* Two-point Common
Functions
* Full Auto E3NC-LA Positioning
Functions Position Tuning
Tuning Tuning
The larger incident level between measurements You can adjust to moving workpieces High-precision, pinpoint workpiece
with and without a workpiece is set to 9,999. without stopping the line. positioning is possible.
* The common functions are provided by both the E3NC-LA and the E3NC-SA.
Additional Long-term Stable Detection with Essentially No Maintenance Even When the Sensor Is Dirty
E3NC-LA Incident level
DPC (Dynamic Power Control)
E3NC-S series
Functions Target value 9999 9999 9999
(displayed incident level) Dirt
Display value compensation DPC
Even if dirt or machine vibration reduces the amount of 9000 Display flashes.
Dirt
light received, OMRON’s unique DPC automatically Incident light
level drops. 8000
Dirt
compensates the displayed incident level to achieve Incident light Compensation
Compensation limit value level drops. 6000 limit value
stable, high-precision detection.
Set value
(threshold value) Time
And, Convenient!
Additional Stable Detection of Everything But the Background
E3NC-SA Easy Adjustment after Head Installation
Functions Tuning without a Workpiece
Easy-to-understand
The background is used as a reference to detect everything but the [Link]
Distance Display
surface conditions or inclination of the workpiece do not influence detection, so stable
detection is maintained without changing the settings even if the workpiece is changed.
(
*
Approximation)
You can see the distance at a glance, which
With Workpiece Background With Workpiece
simplifies adjustment. After head installation, you
can reduce adjustment time after line switchovers
and reduce line stoppage time.
* Digital value of 10 = Approx. 1 mm
50
CMOS light-receiving elements CMOS light-receiving elements CMOS light-receiving elements
100 (mm)
ON OFF ON
11
Would you like to know more?
OMRON EUROPE B.V.
+31 (0) 23 568 13 00
[Link]
Stay in touch
[Link]/omroneurope
[Link]/user/omroneurope
[Link]/company/omron
Austria Germany Portugal Turkey
Tel: +43 (0) 2236 377 800 Tel: +49 (0) 2173 680 00 Tel: +351 21 942 94 00 Tel: +90 212 467 30 00
[Link] [Link] [Link] [Link]
Belgium Hungary Russia United Kingdom
Tel: +32 (0) 2 466 24 80 Tel: +36 1 399 30 50 Tel: +7 495 648 94 50 Tel: +44 (0) 1908 258 258
[Link] [Link] [Link] [Link]
Czech Republic Italy South Africa
Tel: +420 234 602 602 Tel: +39 02 326 81 Tel: +27 (0)11 579 2600
[Link] [Link] [Link]
Denmark Netherlands Spain
Tel: +45 43 44 00 11 Tel: +31 (0) 23 568 11 00 Tel: +34 902 100 221
[Link] [Link] [Link]
Finland Norway Sweden
Tel: +358 (0) 207 464 200 Tel: +47 (0) 22 65 75 00 Tel: +46 (0) 8 632 35 00
[Link] [Link] [Link]
France Poland Switzerland
Tel: +33 (0) 1 56 63 70 00 Tel: +48 22 458 66 66 Tel: +41 (0) 41 748 13 13 More Omron representatives
[Link] [Link] [Link] [Link]
Although we strive for perfection, Omron Europe BV and/or its subsidiary and affiliated companies do not warrant
or make any representations regarding the correctness or completeness of the information described in this document.
CD_EU-01_E3NC_brochure We reserve the right to make any changes at any time without prior notice.
