¢ GIRDER

NOTE TO DETAILER: ¢ DIAPHRAGM ¢ DIAPHRAGM

BARRIER REINF. ~ ¢ GIRDER
2 #4 BETWEEN Revise Details to show correct ¢ BRG. ¢ BRG.
SEE BARRIER SHEETS
GIRDERS (TYP.) girder shape and girder spacing.
FOR DETAILS 6" #4 STIRRUP ~ OPTIONAL FIELD
£#6 (TYP.)
(TYP.) SPA. @ 1'-0" MAX. (TYP.) BEND (TYP.)
1½" SEE EXPANSION JOINT, EDGE
TOP OF OVERLAY 3 £#6 (3'-0" MIN.
CLR. A BEAM AND ABUTMENT TOP OF OVERLAY
SPLICE WHEN REQUIRED)
(TYP.) DETAILS ON BRIDGE SHEETS
2'-0" TOP OF GIRDER

CLR.
2½"
GRADE
#4 AT EXT.
GIRDERS (TYP.)

1'-0" MAX.
ROTATE END HOOKS
AS REQUIRED #4 BETWEEN

SPACE @ 1'-0" MAX.

GIRDERS (TYP.)
2 #4
EDGE BEAM #4 STIRRUP
EDGE BEAM AND END SOFFIT (TYP.)
DIAPHRAGM SOFFIT
TO MATCH BOTTOM EDGE BEAM
EDGE OF GIRDER SOFFIT 2 #7 (TYP.)

(TYP.)
¢ DIAPHRAGM NORMAL

1'-1"
TO GIRDER BOTTOM

3"
BEARING PAD

INTERSECTION OF
2  #7 FULL WIDTH ¢ DIAPHRAGM &
GIRDER STOP
(2'-7" MIN. SPLICE ADJACENT ¢ BEARING
SEE "ANCHOR (TYP.)
TO GIRDERS WHEN REQUIRED)
DETAIL" THIS SHEET
SEE FRAMING PLAN 6" 6"
NOTE TO DESIGNER:
ADJUST GIRDER STOP HEIGHT TO PROVIDE END OF GIRDER
1'-0"
2" MIN. GAP TO BOTTOM OF DIAPHRAGM.
01/01/2015

ELEVATION SYMM. ABOUT ¢ PIER (EXCEPT GRADE)

END DIAPHRAGM
DIMENSIONS ARE ALONG ¢ DIAPHRAGM SECTION A
LONGITUDINAL DIMENSIONS
ARE NORMAL TO DIAPHRAGM.
GIRDER STOP NOT SHOWN FOR CLARITY.

NOTES: FACE OF WEB

1. GIRDERS SHALL BE HELD RIGIDLY IN PLACE WHEN 1½" MIN.

DIAPHRAGMS ARE PLACED. 6" MAX. THREAD 1"ø BOLT (TYP.)

2. IT MAY BE NECESSARY TO THREAD #7 REINFORCING BARS

THROUGH HOLES IN GIRDERS PRIOR TO PLACING EXTERIOR
GIRDERS.
1'-6"
3. CUT/RELEASE GIRDER TEMPORARY STRANDS BEFORE CASTING
DIAPHRAGM. SEE TEMPORARY STRAND CUTTING SEQUENCE.

4. FOR CONCRETE PLACEMENT PROCEDURE SEE CONSTRUCTION ANCHOR DETAIL

SEQUENCE SHEETS. ASTM A-307

M:\STANDARDS\Girders\WFDG\WFDG INTERMEDIATE PIER [Link]

5.6-A6-7

WF DECK GIRDER DIAPHRAGM

AT INTERMEDIATE PIER DETAILS
Tue Mar 10 [Link] 2015