LubeRight MKII
LubeRight components
Software
USB‐cable
Grease Meter
Greasing nipple with tag
(transponder)
How it works
Registration of greasing points
• Name
• Group
• Lubricant amount
• Interval
• Lubricant
Target greasing points are transferred to the grease meter
Performing the greasing
The name of the greasing point and the The real amount fed into the
amount of grease required is shown on greasing point will be registred by
the display. the meter.
The performed lubrication is transferred from the meter to the
computer.
Follow up
Avaliable information:
• Which points have
been lubricated.
• When.
• How much.
• Which points have
been forgotten.
LubeRight OFFERS TOTAL CONTROL OF EVERY SINGLE
GREASING POINT
Hardware
Grease meter
Digital grease meter with antenna for communication with
lubrication nipples. The grease meter has a contact for connection
to the power supply and communication unit.
Data
Max. pressure 70 MPa
Grease connection int. ISO‐G1/8
Weight 0.8 kg
Hose length 400 mm
Flow range 0‐1000 cm³/min.
Accuracy +/‐ 3 % up to 300 bar
Protection IP54
Temp. range ‐20 °C ‐ +40 °C
The grease meter is equipped with a resettable total counter. It can be calibrated and
can show the grease amounts in cm³, g, oz. or fl. oz.
The display of the grease meter is equipped with a backlight for use in dark working
environments.
Hardware
Lubrication nipple with transponder
The transponder has a unique number that the grease
meter identifies.
Stiffening plate and locking ring in acidproof steel.
Lubrication nipple in zinc plated or acid proof steel.
Transponder in epoxy.
Connection thread: ISO‐G1/8 or NPT 1/8
Type of lubrication nipple in accordance with DIN 71412
Temperature range: ‐40 °C to +85 °C
Protection: IP66
Weight: 20 g
Software
[Link]
Software for planning and follow up the lubrication.
Data base: Microsoft SQL Server Express
System requirements: Microsoft Windows 7 or Windows 8
Use
Settings
You can choose if you want the program to plan one or two
years ahead.
If you don’t have longer lubrication intervals than one year,
you should chose one year.
The program extends the schedule with one week for each
week that passes.
Use
Administration
At the administration tab you find the tools to register the lubrication points.
Use
Add a new group and lubricant
Use
Add a new lubrication point
The transponders are
numbered
Hold a transponder in front
of the nozzle.
Use
cm3
Lubrication order
‐1 => any amount
10, 20, 30, etc…
0 => check point
91
Use
Information texts
The information text is shown before this round order number.
Use
Perform the lubrication
1. Click
2. Click
Connect the meter, start it and click ”This week’s lubrications” and ”Transfer data”.
Use
Lubrication
Information text
Performed lubrication
Remaining lubrications
To acknowledge the information text and
show the lubrication point name.
Use
Lubrication
Lubrication point name
Menu
Use
Lubrication
Planned lubrication amount
Lubricate down to zero.
The screen flash!
Use
After the lubrications are performed
Click
Connect the meter, start it and click ”Transfer data”.
Use
Follow up
Internet [Link]
¡GRACIAS POR SU
ATENCIÓN!
Aviso Legal
Copyright© - Derechos de Autor.
Este artículo y su contenido constituye derechos de autor reservados
exclusivamente a BACEMEX. Queda estrictamente prohibido usar,
copiar, modificar, grabar, reproducir o transmitir por cualquier medio,
Bacemex Industrial SA de CV publicar o distribuir, parcial o totalmente, la información que en el
EV Guerrero 326, Nonoalco, Delegación mismo se contiene sin el previo consentimiento por escrito de
Cuauhtémoc, CP 06900 México, D.F. BACEMEX. La información, literatura técnica, dibujos o fotografías
contacto@[Link] contenidos en el artículo es información registrada que está protegida
+52 55 7090-3465 por la Legislación Mexicana y tratados internacionales en materia de
+52 55 7090-4738 Derechos de Autor.
Copyright© ‐ Bacemex Industrial S.A. de C.V. 2016 Derechos de Autor 24
