KlassikDrain features
Wide choice of grates - In various Channel identification -
materials and styles (including ADA Channels feature numbering
compliant) for applications from Load on sidewalls and base of
Class A to Load Class E. channel (to allow easy
See next page for more details. identification after concrete
encasement). Brickslot 100 & 200 - A discreet
drainage solution for use with brick or
QuickLok™ & DrainLok™ - Patented, boltless
stone pavers. Available as standard,
locking systems provide quick fitting and removal
Heel Resistant and Twinslot versions.
of grates. Helps reduce installation/maintenance
See page 58
time and cost.
Direction arrows - Cast on Profiled side walls - Strengthening
side of channel indicate flow pillars and frost keys provide
direction and ensure channels channel body strength and
Steel edge rail - Provides additional are installed correctly. mechanical keying to surrounding
strength and protects channel body concrete.
from damage. Stainless steel edge
rail also available.
Shipping gipple/groove -
Side interlocking feature ensures
safer stacking of channels
on pallets for shipping and
Interconnecting end profiles - minimizes breakage.
Allow easy and effective joining
of channels. Appropriate sealant
can be used to create a sealed
joint.
K300 12” internal width
Polymer concrete - A
durable, yet lightweight
K200 8” internal width material made from
polyester a resin binder
System numbering - reinforced by mineral
Each end of the channel aggregates and fillers. It
indicates the number K100 4” internal width provides up to four times
of the channel that will the compressive strength
connect to it. of cement concrete.
K50 2” internal width
See page 136 for
material properties.
MiniKlassik K50 - A 2” internal width,
Sloped (0.5%) channel constant depth system for high profile,
Anti-shunt lugs -
units - Meter long units aesthetic applications where a barrier is
Protrusions in grate
provide 131'-3” continuous required to separate wet and dry areas.
Knock-outs - Included on all channel units fit into recesses on
slope - equates to 1/17” See page 54.
to allow vertical evacuation of the system the edge rail to prevent
fall per linear foot. Constant
along the run. See product pages for longitudinal movement.
depth units can be used to
sizes for each system. extend run lengths.
15 16
[Link]
