/*
* I2J Version: 10.1R2 / 3/03/2018
* Parse Date: Mon Sep 23 22:23:42 PDT 2019
* Error Lines: 100
* Warning Lines: 7
* Information Lines: 1
* Generated from IOS config file: cisco_bgp.txt
*
* NOTE: This config is NOT PERFECT. It must be carefully
* examined to ensure correctness.
*/
system {
host-name SOLV-CHN01-ILP-RTR001;
login {
class superuser {
idle-timeout 15;
}
user cisco {
class superuser;
authentication {
encrypted-password "password MUST be changed to become valid";
}
}
user solv {
class superuser;
authentication {
encrypted-password "password MUST be changed to become valid";
}
}
}
ntp {
boot-server 202.92.239.215;
server 202.92.239.215;
}
services {
telnet;
}
syslog {
file messages {
any warning;
}
host 202.92.239.26 {
any debug;
/* The default IOS facility is local7 */
facility-override local7;
}
host 202.92.238.232 {
any debug;
/* The default IOS facility is local7 */
facility-override local7;
}
console {
any notice;
}
}
}
interfaces {
ge-0/0/0 {
hold-time up 0 down 2000;
unit 0 {
proxy-arp;
family inet {
address 182.76.42.102/30;
}
}
}
ge-0/0/1 {
hold-time up 0 down 2000;
unit 0 {
proxy-arp;
family inet {
address 103.228.19.5/24 {
vrrp-group 1 {
virtual-address 103.228.19.1;
priority 90;
advertise-interval 3;
preempt;
}
}
}
}
}
ge-0/0/2 {
disable;
hold-time up 0 down 2000;
unit 0 {
proxy-arp;
}
}
lo0 {
description "loopback Interface for Bharti Manage Services(E-NOC)";
hold-time up 0 down 2000;
}
}
snmp {
community enocsolv {
authorization read-write;
clients {
default restrict;
202.92.239.0/24;
202.92.238.0/24;
}
}
}
routing-options {
autonomous-system 133282;
static {
route 0.0.0.0/0 {
next-hop 103.228.19.6;
preference 21;
}
route 202.92.238.0/24 next-hop 182.76.42.101;
route 202.92.238.224/27 next-hop 182.76.42.101;
route 202.92.239.0/24 next-hop 182.76.42.101;
}
}
protocols {
bgp {
path-selection cisco-non-deterministic;
log-updown;
group group-1 {
type external;
neighbor 182.76.42.101 {
export [ bgp-redistributes bgp-policies-group-1-1-export ];
peer-as 9498;
}
}
}
}
policy-options {
community all members "*:*";
policy-statement bgp-policies-group-1-1-export {
term strip-communities {
then {
community delete all;
next term;
}
}
term explicit-default-action {
then next policy;
}
}
policy-statement bgp-redistributes {
term direct {
from protocol direct;
then accept;
}
term static {
from protocol static;
then accept;
}
term sourced-bgp-network {
from route-filter 103.228.19.0/24 exact;
then accept;
}
term from-bgp {
from protocol bgp;
then next policy;
}
term ios-implicit-deny {
then reject;
}
}
}
firewall {
family {
inet {
filter 182 {
term T1 {
from {
protocol tcp;
source-address {
202.92.238.224/27;
202.92.239.0/24;
103.228.19.0/24;
182.76.42.100/30;
182.76.42.102/32;
182.75.15.151/32;
}
destination-port telnet;
}
then {
accept;
}
}
term T2 {
then {
discard;
log;
}
}
}
}
}
}
FPC / PIC / Port numbers MUST ALWAYS be changed to match your Juniper Networks
hardware.
1:! NVRAM config last updated at 15:44:52 IST Tue Apr 2 2019 by a1wppe8v
2:!
3:version 15.4
4:service tcp-keepalives-in
Lines related to services are not supported by I2J. Further service-related
messages will be suppressed
5:service timestamps debug datetime msec
6:service timestamps log datetime localtime show-timezone
7:service password-encryption
This is the default in JUNOS
8:no platform punt-keepalive disable-kernel-core
Line not yet supported by I2J
9:platform hardware throughput level 100000
Line not yet supported by I2J
10:!
11:hostname SOLV-CHN01-ILP-RTR001
12:!
13:boot-start-marker
Line not yet supported by I2J
14:boot-end-marker
Line not yet supported by I2J
15:!
16:!
17:vrf definition Mgmt-intf
Line not yet supported by I2J
18: !
19: address-family ipv4
Line not yet supported by I2J
20: exit-address-family
Line not yet supported by I2J
21: !
22: address-family ipv6
Line not yet supported by I2J
23: exit-address-family
Line not yet supported by I2J
24:!
25:logging buffered 51200 warnings
26:enable secret 5 $1$jbsB$IM5X1IQLg8hiUb72xKpQS0
Line not yet supported by I2J
27:!
28:aaa new-model
29:!
30:!
31:aaa authentication login default group tacacs+ local
Line not yet supported by I2J
32:aaa authorization config-commands
Line not yet supported by I2J
33:aaa authorization exec default group tacacs+ local
Line not yet supported by I2J
34:aaa accounting commands 0 default start-stop group tacacs+
Line not yet supported by I2J
35:aaa accounting commands 1 default start-stop group tacacs+
Line not yet supported by I2J
36:aaa accounting commands 7 default start-stop group tacacs+
Line not yet supported by I2J
37:aaa accounting commands 15 default start-stop group tacacs+
Line not yet supported by I2J
38:!
39:!
40:!
41:!
42:!
43:aaa session-id common
Line not yet supported by I2J
44:clock timezone IST 5 30
JUNOS uses geographical location rather than GMT time. Use set system time-zone to
set location
45:!
46:!
47:!
48:!
49:!
50:!
51:!
52:!
53:!
54:
55:
56:no ip bootp server
Line not yet supported by I2J
57:no ip domain lookup
Line not yet supported by I2J
58:
59:!
60:!
61:!
62:!
63:!
64:!
65:!
66:!
67:!
68:!
69:subscriber templating
Line not yet supported by I2J
70:multilink bundle-name authenticated
Line not yet supported by I2J
71:!
72:!
73:!
74:!
75:license udi pid ISR4321/K9 sn FDO20210AGS
Line not yet supported by I2J
76:!
77:username cisco password 7 094F471A1A0A
Password must be changed
78:username enoc privilege 15 secret 5 $1$VZgo$HlqLXMlai6bW2DS371cYV/
Line not yet supported by I2J
79:username solv privilege 7 password 7 1316181E1D2C557878
I2J does not support AAA yet. Password must be changed
80:!
81:redundancy
IOS and JUNOS redundancy features are too platform-specific to convert
automatically
82: mode none
Line not yet supported by I2J
83:!
84:!
85:no cdp run
CDP equivalent LLDP protocol is enabled by default on EX/MX switches.To disable,
delete under protocol stanza.
86:!
87:track 3 ip sla 100 reachability
Line not yet supported by I2J
88:!
89:!
90:!
91:!
92:!
93:interface Loopback0
94: no ip address
Line not yet supported by I2J
95:!
96:interface Loopback100
97: description loopback Interface for Bharti Manage Services(E-NOC)
Line not yet supported by I2J
98: ip address 182.75.15.151 255.255.255.255
Line not yet supported by I2J
99:!
100:interface GigabitEthernet0/0/0
101: ip address 182.76.42.102 255.255.255.252
Line not yet supported by I2J
102: load-interval 30
Line not yet supported by I2J
103: negotiation auto
Line not yet supported by I2J
104:!
105:interface GigabitEthernet0/0/1
106: ip address 103.228.19.5 255.255.255.0
Line not yet supported by I2J
107: standby 1 ip 103.228.19.1
Line not yet supported by I2J
108: standby 1 priority 90
Line not yet supported by I2J
109: standby 1 preempt
Line not yet supported by I2J
110: standby 1 track 3 decrement 30
Line not yet supported by I2J
111: load-interval 30
Line not yet supported by I2J
112: negotiation auto
Line not yet supported by I2J
113:!
114:interface GigabitEthernet0
115: vrf forwarding Mgmt-intf
Line not yet supported by I2J
116: no ip address
Line not yet supported by I2J
117: shutdown
Line not yet supported by I2J
118: negotiation auto
Line not yet supported by I2J
119:!
120:router bgp 133282
121: bgp log-neighbor-changes
Line not yet supported by I2J
122: network 103.228.19.0 mask 255.255.255.0
Line not yet supported by I2J
123: redistribute connected
Line not yet supported by I2J. JUNOS will redistribute subnets, unlike IOS
124: redistribute static
Line not yet supported by I2J. JUNOS will redistribute subnets, unlike IOS
125: neighbor 182.76.42.101 remote-as 9498
Line not yet supported by I2J
126: neighbor 182.76.42.101 allowas-in 6
Line not yet supported by I2J
127:!
128:ip forward-protocol nd
Line not yet supported by I2J
129:no ip http server
Line not yet supported by I2J
130:no ip http secure-server
Line not yet supported by I2J
131:ip tftp source-interface GigabitEthernet0
In JUNOS you may use the system->default-address-selection command to set the
source address for most internally generated packets
132:ip route 0.0.0.0 0.0.0.0 103.228.19.6 21
133:ip route 202.92.238.0 255.255.255.0 182.76.42.101
134:ip route 202.92.238.224 255.255.255.224 182.76.42.101
135:ip route 202.92.239.0 255.255.255.0 182.76.42.101
136:ip tacacs source-interface Loopback100
Line not yet supported by I2J
137:!
138:!
139:ip sla 100
Line not yet supported by I2J
140: icmp-echo 182.76.42.101 source-ip 182.76.42.102
Line not yet supported by I2J
141:ip sla schedule 100 life forever start-time now
Line not yet supported by I2J
142:logging history debugging
Line not yet supported by I2J
143:logging trap debugging
144:logging source-interface Loopback100
In JUNOS you may use the system->default-address-selection command to set the
source address for most internally generated packets
145:logging host 202.92.239.26
146:logging host 202.92.238.232
147:access-list 98 permit 202.92.239.0 0.0.0.255
148:access-list 98 permit 202.92.238.0 0.0.0.255
149:access-list 98 deny any log
150:access-list 182 permit tcp 202.92.238.224 0.0.0.31 any eq telnet
Access list was unused -- Converted into filter
151:access-list 182 permit tcp 202.92.239.0 0.0.0.255 any eq telnet
152:access-list 182 permit tcp 103.228.19.0 0.0.0.255 any eq telnet
153:access-list 182 permit tcp 182.76.42.100 0.0.0.3 any eq telnet
154:access-list 182 permit tcp host 182.76.42.102 any eq telnet
155:access-list 182 permit tcp host 182.75.15.151 any eq telnet
156:access-list 182 deny ip any any log
157:!
158:snmp-server community enocsolv RW 98
159:snmp ifmib ifindex persist
Line not yet supported by I2J
160:!
161:tacacs-server host 202.92.239.217
Line not yet supported by I2J. Further tacacs-server-related messages will be
suppressed
162:tacacs-server timeout 10
163:tacacs-server directed-request
164:tacacs-server key 7 0317520D1F2F265F410A
165:!
166:!
167:!
168:control-plane
Line not yet supported by I2J
169:!
170:privilege exec level 7 traceroute
Line not yet supported by I2J. Further messages about this line will be suppressed
171:privilege exec level 7 ping ip
172:privilege exec level 7 ping
173:privilege exec level 7 show ip bgp
174:privilege exec level 7 show ip route
175:privilege exec level 7 show ip
176:privilege exec level 7 show processes
177:privilege exec level 7 show configuration
178:privilege exec level 7 show
179:privilege exec level 7 clear counters
180:privilege exec level 7 clear
181:banner motd ^C
JUNOS only supports login banners
182:*****************************************************************************
183: THIS SYSTEM IS FOR THE USE OF AUTHORIZED USERS ONLY.
184:
185:USERS HAVE NO EXPLICT OR IMPLICIT EXPECTATIONS OF PRIVACY.
186: ANY OR ALL USE OF THIS SYSTEM AND ALL FILES ON THIS SYSTEM
187: MAY BE INTERCEPTED,MONITORED, RECORDED, COPIED, AUDITED,
188:INSPECTED, AND DISCLOSED TO THE NECESSARY AUTHORITIES. BY
189: USING THIS SYSTEM, THE USER CONSENTS TO SUCH INTERCEPTION.
190:UNAUTHORIZED OR IMPROPER USE, OR ATTEMPTED USE, OF THIS
191:SYSTEM MAY RESULT IN ADMINISTRATIVE DISCIPLINARY ACTION AND
192: CIVIL AND CRIMINAL PENALTIES. BY CONTINUING TO USE THIS SYSTEM
193: YOU INDICATE YOUR AWARENESS OF, AND CONSENT TO THESE TERMS
194: AND CONDITIONS OF USE. LOG OFF IMMEDIATELY IF YOU DO NOT AGREE
195:TO THE CONDITIONS THAT ARE STATED IN THIS WARNING.
196:
197:****************************************************************************
198:^C
199:!
200:line con 0
Only line vty supported -- Not converting this whole section
201: exec-timeout 5 0
Line not yet supported by I2J
202: password 7 14161B191801260B21263C36
Line not yet supported by I2J
203: stopbits 1
Line not yet supported by I2J
204:line aux 0
Only line vty supported -- Not converting this whole section
205: exec-timeout 0 1
Line not yet supported by I2J
206: no exec
Line not yet supported by I2J
207: stopbits 1
Line not yet supported by I2J
208:line vty 0 4
209: exec-timeout 15 0
Line not yet supported by I2J
210: password 7 0448020016014B5D061A
Line not yet supported by I2J
211: transport input all
Line not yet supported by I2J
212: transport output none
Line not yet supported by I2J
213:line vty 5 15
Previous line vty section already converted to loopback -- Not converting this
whole section
214: exec-timeout 15 0
Line not yet supported by I2J
215: password 7 120A0C110B2B0B172528
Line not yet supported by I2J
216: transport input telnet
Line not yet supported by I2J
217: transport output none
Line not yet supported by I2J
218:!
219:ntp source Loopback100
There was no equivalent JUNOS IP Address to convert the source interface to
220:ntp server 202.92.239.215
221:!
222:end
[Interface Conversion Messages]
IOS interfaces without explicit clocking will have internal clocking in JUNOS by
default
