F&T APPAREL LLC

UNIVERSAL FOLDING & HANGING MANUAL

Metroplex Corporate Center #1, Suite 320

4000 Chemical Road, Suite 500
Plymouth Meeting, PA 19462-1708
Tel: (610) 828-8400
Fax: (610) 828 5812

June 14th, 2012

 © 2012 F&T Apparel LLC all rights reserved.

Metroplex Corporate Center #1, Suite 320

4000 Chemical Road, Suite 500
Plymouth Meeting, PA 19462-1708
Tel: (610) 828-8400
Fax: (610) 828 5812

B · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

Contents

1. INTRODUCTION..............................................................................................................3
Fold Method Codes & Descriptions.......................................................................................................4

2. PACKING INSTRUCTIONS BY PRODUCT TYPE

Sets................................................................................................................................................... 7-81
Dresses / Jumpers........................................................................................................................... 82-84
Suits & Suit Sets........................................................................................................................... 85-110
Blazers....................................................................................................................................... 111-116
Vests............................................................................................................................................117-118
Tops............................................................................................................................................ 119-158
Bottoms...................................................................................................................................... 159-189
Outerwear...................................................................................................................................188-200

3. Universal Packing List...................................................................................................201

4. Carton Box Specificans...........................................................................................202-205

5. APPENDIX.............................................................................................................206-207

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 1

2 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00
Introduction

This Folding and Packing manual has been created to provide guidelines on how to prep merchandise for
safe and efficient movement from our factories to our distribution centers and customers. This manual is to
be used in conjunction with the specific customer manuals.

These guidelines pertain to all product categories.

The following guidelines should be followed before and while folding or hanging the finished garment.

• Fold or hang using the method code identified in the Packing Instructions on the purchase order.

• Make certain the work surface is clean, flat, and large enough to accommodate entire finished garment.

• Before folding or hanging, the finished garment should be laid flat on the table. All wrinkles and folds
should be smoothed out and the garment should be in its natural position, free of tension.

• If the finished garment has pleats, gathers, etc. please check purchase order specifications as to how to
fold or hang; open or side presentation.

• All folded items must be neatly folded and packaged snugly so that the item fold is maintained during
handling.

• The Fold / Hang method codes contain 3 components:

1. 3 - 4 letters identifying garment type (i.e. SET).

2. The letter (F) for Folded or the letter (H) for Hanging items.

3. The last digit will identify what diagram to reference since the same garment type can be folded /
hung various ways.

4. If a garment type is currently hung / folded in only one method, the code will still end with the
#1 in order to keep the coding system consistent.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 3

FOLD / HANG METHOD CODES & DESCRIPTIONS
SET - H1 Vest / Sweater Set - Pant SIDE presentation - Hanging (Option 1)

SET - H2 Vest / Sweater Set - Pant SIDE presentation - Hanging (Option 2)

SET - H3 Vest / Sweater Set - Pant SIDE presentation - Hanging (Option 3)

SET - H4 Vest / Sweater Set - Pant SIDE presentation - Hanging (Option 4)

SET - H5 Vest / Sweater Set - Pant SIDE presentation - Hanging (Option 5)

SET - H6 Vest / Sweater Set - Pant OPEN presentation - Hanging (Option 6)

SET - H7 Vest / Sweater Set - Pant OPEN presentation - Hanging (Option 7)

SET - H8 Sweater/ Jacket Set – Pant OPEN presentation – Hanging (Option 8)

SET - H9 Sweatshirt/ Jacket Set – Pant OPEN presentation – Hanging (Option 9)

SET - F1 Vest / Sweater Set - Pant SIDE presentation - Folded (Option 1)

KSET - H1 Knit Set 2pc - Hanging (Option 1)

KSET - H2 Knit Set 2pc - Hanging (Option 2)

KSET - H3 Knit Set 2pc - Hanging (Option 3)

KSET - H4 Knit Set 3pc - Hanging (Option 4)

KSET - H5 Infant Knit Set 3pc - Hanging (Option 5)

KSET - H6 Infant Knit Set 3pc - Hanging (Option 6)

KSET - F1 Knit Set - Folded (Option 1)

KSET - F2 Knit Set - Folded (Option 2)

KSET - F3 Knit Set - Folded (Option 3)

KSET - F4 Knit Set - Folded (Option 4)

KSET - F5 Knit Set - Folded (Option 5)

GSET - H1 Girls Infant / Toddler Dress 2pc Set - HANGING (Option 1)

DRS - H1 Dress / Jumper - Hanging (Option 1)

SUIT - H1 Suit - Hanging (Option 1)

SUIT - H2 Suit Set - Hanging (Option 2)

4 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

FOLD / HANG METHOD CODES & DESCRIPTIONS
SUIT - H3 Suit Set - Hanging (Option 3)

SUIT - H4 Suit Set - Hanging (Option 4)

SUIT - H5 Suit Short Set - Hanging (Option 5)

SUIT - F1 Suit – Folded (Option 1)

SUIT - F2 Suit – Folded (Option 2)

BLZR - H1 Blazer – Hanging (Option 1)

BLZR - H2 Blazer – Hanging (Option 2)

BLZR - F1 Blazer – Folded (Option 1)

VEST-F1 Vest, Sleeveless, Cap Sleeve Top - Folded (Option 1)

TOP - H1 Shirt - Hanging (Option 1)

TOP - H2 Shirt - Hanging (Option 2)

TOP - H3 Shirt - Hanging (Option 3)

TOP - H4 Shirt - Hanging (Option 4)

TOP - H5 Shirt - Hanging (Option 5)

TOP - F1 Shirt - Folded (Option 1)

TOP - F2 Shirt - Folded (Option 2)

TOP - F3 Shirt - Folded (Option 3)

TOP - F4 Shirt - Folded (Option 4)

TOP - F5 Shirt - Folded Option 5 (Cuff folded to the front)

TOP - F6 Shirt - Folded Option 6 (Cuff folded to the front)

PKGD - F1 Packaged Woven Shirt - Folded (Option 1)

PKGD - F2 Packaged Woven Shirt - Folded (Option 2)

PKGD - F3 Packaged Woven Shirt - Folded (Option 3)

PKGD - F4 Packaged Woven Shirt - Folded Option 4 (Cuff folded to the front)

TRSR - H1 BOYS Trouser - Hanging (Option 1)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 5

FOLD / HANG METHOD CODES & DESCRIPTIONS
TRSR - H2 BOYS Trouser - Hanging (Option 2)

TRSR - H3 MENS Trouser - Hanging (Option 3)

TRSR - H4 MENS Trouser - Hanging (Option 4)

TRSR -H5 MENS Trouser - Hanging (Option 5)

BOT - H1 Bottom - Open Presentation Hanging (Option 1)

BOT - H2 Bottom - Open Presentation Hanging (Option 2)

BOT - H3 Bottom - Open Presentation Hanging FLAT (Option 3)

TRSR - F1 Casual Trouser - Folded (Option 1)

TRSR - F2 Casual Trouser - Folded (Option 2)

TRSR - F3 Casual Trouser - Folded (Option 3)

TRSR - F4 Casual Trouser - Folded (Option 4)

TRSR - F5 Casual Trouser - Folded (Option 5)

BOT - F1 Bottom - Flat Folded (Option 1)

BOT - F2 Bottom - Flat Folded (Option 2)

BOT - F3 Bottom - Flat Folded (Option 3)

BOT - F4 Bottom - Flat Folded (Option 4)

JKT - H1 Outerwear Jacket - Hanging (Option 1)

JKT - F1 Outerwear Jacket - Folded Option 1 (No Hood)

JKT - F2 Outerwear Jacket - Folded Option 2 (With Hood)

JKT - F3 Outerwear Jacket - Folded Option 3 (No Hood)

JKT - F4 Outerwear Jacket - Folded Option 4 (With Hood)

JKT - F5 Outerwear Jacket - Folded Option 5 (With or Without Hood)

6 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 VEST / SWEATER SETS

Plastic clips cannot be used to hold up the hem of the shirt.

We must now use a "micro-pin" attached on either side
THROUGH THE SEAM.
It is very important that in order not to damage the shirt
CARE MUST BE TAKEN TO ATTACH THE PIN THROUGH THE SIDE SEAM.

1. Put shirt on hanger.

2. Fold the hem inside the shirt.
3. Attach micro-pin on both sides.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 7

 SET - H1: Vest / Sweater Set - Pant SIDE presentation - Hanging (Option 1)

1. Put shirt on hanger, fold tail of shirt in up to armhole. Secure with micro-pins at each side.

MICRO-PIN PLACEMENT

2. Hang pant as shown.

8 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SET - H1

3. Assemble set as shown.

4. Fold sleeves to the back and place garments in a Master poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 9

 SET - H1

5. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open.)

6. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

10 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

SET - H2: Vest / Sweater Set - Pant SIDE presentation - Hanging (Option 2)

1. Put shirt on hanger, fold tail of shirt up to armhole. Secure with micro-pins at each side.

MICRO-PIN PLACEMENT

2. Hang pant as shown.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 11

 SET - H2

3. Assemble set as shown.

4. Fold sleeves to the back and place garments in a Master poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)

12 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SET - H2

5. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open.)

6. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 13

 SET - H3: Vest / Sweater Set - Pant SIDE presentation - Hanging (Option 3)

1. Put shirt on hanger, fold tail of shirt up to armhole. Secure with micro-pins at each side.

MICRO-PIN PLACEMENT

2. Hang pant as shown.

14 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SET - H3

3. Assemble set as shown.

Place pant inside shirt and attach the hook through the hole on the shirt hanger.

4. Fold sleeves to the back and place garments in a Master poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 15

 SET - H3

5. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open.)

6. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

16 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

SET - H4: Vest / Sweater Set - Pant SIDE presentation - Hanging (Option 4)

1. Hang pant as shown.

2. Put shirt on hanger, place shirt on top of pant and tuck the tail of shirt into the "hooks"
of the hanger at back. The shirt should be folded up right after clipping.

Close-up of shirt tail.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 17

 SET - H4

3. Hook pant drop hanger OVER the shirt hanger so that pant is at back.

FRONT BACK

4. Put vest over shirt so that the tail of the shirt is NOT hanging below the sweater vest.

18 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SET - H4

5. Fold sleeves to the back and place garments in a Master poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)

6. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 19

 SET - H4

7. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

20 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

SET - H5: Vest / Sweater Set - Pant SIDE presentation - Hanging (Option 5)

1. Put shirt on hanger, fold tail of shirt in up to armhole. Secure with micro-pins at each side.

MICRO-PIN PLACEMENT

2. Hang pant as shown.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 21

 SET - H5

3. Assemble set as shown.

4. Fold sleeves to the back.

22 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SET - H5

5. Fold set in half.

BACK VIEW

6. Fold garment in thirds.

BACK VIEW FRONT VIEW

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 23

 SET - H5

7. Place garments in poly-bag and tape bag shut.

8. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

24 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

SET - H6: Vest / Sweater Set - Pant OPEN presentation - Hanging (Option 6)

1. Put shirt on hanger, fold tail of shirt up to armhole. Secure with micro-pins at each side.

MICRO-PIN PLACEMENT

2. Hangg pant as shown.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 25

 SET - H6

3. Assemble set as shown. Place pant inside shirt and attach the hook
through the hole on the shirt hanger.

4. Fold sleeves to the back and place garments in a Master poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)

26 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SET - H6

5. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open.)

6. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 27

 SET - H7: Vest / Sweater Set - Pant OPEN presentation - Hanging (Option 7)

1. Hang pant as shown.

2. Put shirt on hanger, place shirt on top of pant and tuck the tail of shirt into the "hooks"
of the hanger at back. The shirt should be folded up right after clipping.

Close up of shirt tail.

28 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SET - H7

3. Hook pant drop hanger OVER the shirt hanger so that pant is at back.

4. Put vest over shirt so that the tail of the shirt is NOT hanging
below the sweater vest.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 29

 SET - H7

5. Fold sleeves to the back and place garments in a Master poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)

30 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SET - H7

6. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open.)

7. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 31

SET - H8: 3PC SET - Vest / Sweater / Jacket Set - Pant OPEN presentation - Hanging (Option 8)

1. Put shirt on hanger.

2. Hang pant as shown 3. Hook pant drop hanger OVER the shirt hanger
so that pant is at back.

32 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SET - H8

EXAMPLE A: DRESS SHIRT / PANT EXAMPLE B: T-SHIRT / PANT

FRONT VIEW FRONT VIEW

4. Place sweater / jacket over shirt & pant.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 33

 SET - H8

5. If hooded garment, fold hood back first.

Then fold sleeves to the back and place garments in Master poly-bag.
(Quantity will be specified in Purchase Order packing requirements.)

6. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open.)

34 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SET - H8

7. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 35

 SET - H9: 2PC SET - Sweatshirt / Jacket Set - (Hood or No Hood) Pant OPEN presentation - Hanging (Option 9)

1. Place pant on hanger as below. 2. Hook pant drop hanger OVER the shirt
hanger so that pant is at the back.

3. Put sweatshirt / jacket on shirt hanger so that pant hangs INSIDE.

36 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SET - H9

4. If hooded garment, fold hood back first.

Then fold sleeves to the back and place garments in Master poly-bag.
(Quantity will be specified in Purchase Order packing requirements.)

6. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 37

 SET - H9

6. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

38 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

SET - F1: Vest / Sweater Set - Pant SIDE presentation - Folded (Option 1)

1. Fold shirt sleeves to the FRONT.

2. Fold the shirt in half (front to front).

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 39

 SET - F1

3. Fold vest in half (back to back).

4. With pant in side presentation, lay flat and fold in half

by bringing the bottom of leg up just below the waistband.

a)

b)

40 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

SET - F1
5. STACK ALL OF THE PIECES ON TOP OF EACH OTHER:
PANTS on the bottom, SHIRT in the middle and VEST on the top.

6. Place set in poly-bag adn tape bag shut.

(front view)

vest set

sweater set

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 41

 SET - F1

7. Reverse garment direction in carton.

(Poly-bags must be 4" longer than garments.)

42 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 2-PIECE SETS

KSET - H1: Knit Set 2pc - Hanging (Option 1)

1. Put shirt and bottom on separate hangers.

2. Clip the sweep of the shirt to the bottom hanger.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 43

 KSET - H1

3. Put the two hangers together.

4. Put the sweater over the entire set.

44 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

KSET - H1

5. Place garments in a Master poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)

6. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 45

 KSET - H1

7. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

46 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 KSET - H2: Knit Set 2pc - Hanging (Option 2)

1. Put shirt and bottom on separate hangers.

2. Loop bottom hanger over the hook of the top hanger so that
the front of the pant is showing OUTSIDE.
EXAMPLE A: T-SHIRT / PANT EXAMPLE B: JACKET / PANT
BACK VIEW BACK VIEW

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 47

 KSET - H2

EXAMPLE A: T-SHIRT / PANT EXAMPLE B: JACKET / PANT

FRONT VIEW FRONT VIEW

3. Fold sleeves to the back and place garments in a Master poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)

EXAMPLE A: T-SHIRT / PANT EXAMPLE B: JACKET / PANT

BACK VIEW BACK VIEW

48 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 KSET - H2

4. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open.)

EXAMPLE A: T-SHIRT / PANT EXAMPLE B: JACKET / PANT

5. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 49

 3-PIECE SETS

KSET - H3: Knit Set 3pc - Hanging (Option 3)

1. Place t-shirt on hanger as below.

2. Place pant on hanger as below.

50 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

KSET - H3
3. Place jacket on hanger as below.
FRONT VIEW BACK VIEW

4. On the t-shirt, 5. On the jacket, fold the 6. Place garments in a

fold the sleeves to the front. sleeves to the back so the Master poly-bag.
two sets of sleeves overlap. (Quantity will be specified in Purchase
Order packing requirements.)

42
F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 51
 KSET - H3

7. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open.)

8. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

52 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 KSET - H4: Knit Set 3pc - Hanging (Option 4)

1. Place first shirt on hanger as below.

S/S Shirt S/S Onesie

2. Place second shirt on hanger as below.

Double S/S Shirts S/S Shirt & L/S Shirt

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 53

 KSET - H4

3. Place pant on hanger as below. 4. Hook pant drop hanger over the
shirt hanger so that pant is at back.

(BACK VIEW)

EXAMPLE A: Double S/S Shirts/Pant Combo EXAMPLE B: S/S & L/S Shirts/Pant Combo
FRONT VIEW FRONT VIEW

54 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 KSET - H4

5. If L/S Shirt Combo, fold the sleeves 6. Place garments in a Master poly-bag.
to the front so it overlaps the S/S Shirt. (Quantity will be specified in Purchase Order
packing requirements.)

7. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open).

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 55

 KSET - H4

8. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

56 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

KSET - H5: Infant Knit Set 3pc - Hanging (Option 5)

1. Place onesie on hanger below.

2. Place pant on hanger as below.

3. Hook pant drop hanger over the shirt hanger so that pant is at back.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 57

 KSET - H5

4. Swift tack the bib through the hole in the hanger.

(FRONT VIEW) (BACK VIEW)

5. If long sleeved garment, fold sleeves to the back first. Then place garments in Master poly-bag.
(Quantity will be specified in Purchase Order packing requirements.)

6. Fold the entire set in half and tape bag shut. (Except for JC Penney, keep bags open).

58 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 KSET - H5

7. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 59

 KSET - H6: Knit Set 2pc - Hanging (Option 6)

1. Place t-shirt on lower hanger as below.

2. Flip hanger over so the back 3. Secure the set together swift tacked
of the t-shirt is facing up. at the side seam and hem seam between
Place the sweatshirt/jacket on the the two tops.
upper hanger as below.
(The front of each shirt should face
outward when flipped over.)

BACK OF T-SHIRT

60 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 KSET - H6

4. Flip set back over so t-shirt is on the top.

5. On the t-shirt, 6. On the jacket, fold the 7. Place garments in a Master

fold the sleeves to the front. sleeves to the back so the poly-bag. (Quantity will be
two sets of sleeves overlap. specified in purchase order
packing requirements.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 61

 KSET - H6

8. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open.)

7. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

62 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 KSET - F1: Knit Set - Folded Option 1 (with or without bib)

L/S Shirt S/S Shirt L/S Onesie S/S Onesie

1. Lay garment flat, back facing up.

Fold LEFT sleeve in across back. Fold RIGHT sleeve in across back over left sleeve.
(Make sure garment back remains flat.)

L/S Shirt or Onesie S/S Shirt or Onesie

2. Bring bottom up to collar.

Shirt Onesie

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 63

 KSET - F1

3. Lay pant flat and fold left and 4. Fold the pant in half by bringing the bottom
right legs together of the leg just BELOW the waistband.

5A: Place folded pant on top of shirt as shown.

5B: Place folded pant on top of shirt/bib as shown.

64 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

KSET - F1

6. Flip the set over, place in poly-bag and tape bag shut.
Stacked order: PANTS on the bottom, BIB in the middle (if applicable), SHIRT on the top.

7. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 65

 : Knit Set with Vest - Folded (Option 2)

L/S Shirt S/S Shirt L/S Onesie S/S Onesie

1. Fold shirt sleeves to the FRONT.

L/S Shirt or Onesie S/S Shirt or Onesie

2. Bring bottom up to collar.

Shirt Onesie

66 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

KSET - F2

3. Fold the vest in half (back to back).

(If hooded, fold hood down first and then fold vest in half.

Sweater Vest Jacket Vest Jacket Vest with Hood

4. Lay pant flat and fold left and 5. Fold the pant in half by bringing the bottom
right legs together of the leg just BELOW the waistband.

6. STACK ALL OF THE PIECES ON TOP OF EACH OTHER:

PANTS on the bottom, SHIRT in the middle and VEST on the top.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 67

 KSET - F2

7. Place in poly-bag and tape bag shut.

8. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)

68 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 KSET - F3: Knit Set with Jacket - Folded (Option 3)

L/S Shirt S/S Shirt L/S Onesie S/S Onesie

1. Fold shirt sleeves to the FRONT.

L/S Shirt or Onesie S/S Shirt or Onesie

2. Bring bottom up to collar.

Shirt Onesie

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 69

 KSET - F3

3. Lay jacket flat, back facing up.

If hooded garment, fold hood down first.
Fold LEFT sleeve in across back. Fold RIGHT sleeve in across back over left.
(Make sure jacket back remains flat.)

1
2

FRONT VIEW BACK VIEW

2
3

FRONT VIEW BACK VIEW

4. Fold the jacket in half (back to back).

70 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

KSET - F3

5. Lay pant flat and fold left and 6. Fold the pant in half by bringing the bottom
right legs together of the leg just BELOW the waistband.

7. STACK ALL OF THE PIECES ON TOP OF EACH OTHER:

PANTS on the bottom, SHIRT in the middle and JACKET on the top.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 71

 KSET - F3

8. Place in poly-bag and tape bag shut.

9. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)

72 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 KSET - F4: Knit Set 2pc - Folded (Option 4)

L/S Shirt S/S Shirt L/S Onesie S/S Onesie

1. Lay garment flat, back facing up.

Fold LEFT sleeve in across back. Fold RIGHT sleeve in across back over left sleeve.
(Make sure garment back remains flat.)

L/S Shirt or Onesie S/S Shirt or Onesie

2. Bring bottom up to collar.

Shirt Onesie

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 73

 KSET - F4

3. Lay pant flat and fold left and 4. Fold the pant in half by bringing the bottom
right legs together of the leg just BELOW the waistband.

5. STACK ALL OF THE PIECES ON TOP OF EACH OTHER:

PANTS on the bottom, SHIRT on the top.

6. Place in poly-bag and tape bag shut.

74 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 KSET - F4

7. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 75

 KSET - F5: Knit Set 3pc - Folded (Option 5)

L/S Shirt S/S Shirt L/S Onesie S/S Onesie

1. Fold L/S shirt sleeves to the FRONT. 2. Bring bottom up to collar.

L/S Shirt or Onesie

L/S Shirt or Onesie

3. Lay S/S shirt flat, back facing up. 4. Fold the S/S shirt
Fold LEFT sleeve in across back. in half (back to back).
Fold RIGHT sleeve in across back over left sleeve. FRONT VIEW
(Make sure shirt back remains flat.)

S/S Shirt or Onesie

S/S Shirt or Onesie

76 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

KSET - F5

5. Lay pant flat and fold left and 6. Fold the pant in half by bringing the bottom
right legs together of the leg just BELOW the waistband.

7. STACK ALL OF THE PIECES ON TOP OF EACH OTHER:

PANTS on the bottom, L/S shirt in the middle and S/S shirt on the top.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 77

 KSET - F5

8. PPlace in poly-bag and tape bag shut.

9. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)

78 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

GSET - H1: Girls Infant / Toddler Dress 2pc Set - HANGING (Option 1)

1. Hang dress as shown.

2. Hang panty as shown.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 79

 GSET - H1
3. Hook the panty through the dress hanger so that panty is at the back.

4. Put garments in a Master poly-bag and tape bag shut. (Except for JC Penney, keep bags open.)
(Quantity will be specified in Purchase Order packing requirements.)

BACK VIEW FRONT VIEW

80 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 GSET - H1

5. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 81

 DRS - H1: Dress / Jumper - HANGING (Option 1)

1. Put the dress or jumper on hanger.

BACK VIEW

82 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

DRS - H1

2. Fold garment in half.

BACK VIEW
BACK VIEW FRONT VIEW
FRONT VIEW

3. Place garment in poly-bag and tape bag shut. (Except for JC Penney, keep bags open.)
(Quantity will be specified in Purchase Order packing requirements.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 83

 DRS - H1

4. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

84 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

SUIT-H1: Suit Set - Hanging (Option 1)

1. Prepare pant in side presentation.

2. Hang the pant over the hanger's beam at loop line.

(Loop line = 1/2 the pant length.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 85

 SUIT - H1
3. Secure pant to hanger with micro-clip as shown.

4. Put the jacket on the hanger over the pant.

Do not button the jacket.

(Final assembled view.)

86 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SUIT - H1
5. Fold sleeves of jacket to the front of garment.
Place garment in poly-bag and tape bag shut. (Except for JC Penney, keep bags open.)

6. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)
(Anchor hanger hooks to sides of carton.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 87

 SUIT-H2: Suit Set - Hanging (Option 2)

1. Hang pant as shown.

2. Hook the pant hanger through the shirt hanger so pant is at back.

88 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SUIT - H2

3. Hang the shirt over the pant.

4. Close the center front buttons of shirt.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 89

 SUIT - H2

5. Attach tie to shirt.

6. Put the jacket on hanger over the shirt.

Do not button the jacket.

90 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SUIT - H2

7. Fold pant legs up to the back.

8. Fold sleeves to the back.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 91

 SUIT - H2

9. Fold the whole suit set in half & place in poly-bag.

Tape the bag shut. (Except for JC Penney, keep bags open.)

FRONT VIEW BACK VIEW

10. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)
(Anchor hanger hooks to sides of carton.)

92 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

SUIT-H3: Suit Set - Hanging (Option 3)

1. Prepare pant in side presentation.

2. Hang the pant over the hanger's beam at loop line.

(Loop line = 1/2 the pant length.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 93

 SUIT - H3

3. Secure pant to hanger with micro-clip as shown.

4. Hang the shirt over the pant.

94 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SUIT - H3

5. Close the center front buttons of shirt. 6. Attach tie to shirt.

7. Put the jacket on hanger over the shirt.

Do not button the jacket.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 95

 SUIT - H3
8. Fold sleeves of jacket to the front of garment.
Place garment in poly-bag and tape bag shut. (Except for JC Penney, keep bags open.)

9. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)
(Anchor hanger hooks to sides of carton.)

96 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SUIT-H4: Suit Set - Hanging (Option 4)

1. Hang pant as shown.

2. Put shirt on hanger, place shirt on top of pant and tuck the tail of shirt into the "hooks"
of the hanger at back. The shirt should be folded up right after clipping.

Close up of shirt tail.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 97

 SUIT - H4

3. Hook the pant hanger OVER the shirt hanger so pant is at back.

FRONT VIEW BACK VIEW

4. Attach tie to shirt. 5. Put jacket over shirt.

98 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SUIT - H4

6. Fold pant legs up to the back.

7. Fold sleeves to the back.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 99

 SUIT - H4

8. Fold the whole suit set in half & place in poly-bag.

Tape the bag shut. (Except for JC Penney, keep bags open.)

FRONT VIEW BACK VIEW

9. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)
(Anchor hanger hooks to sides of carton.)

100 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

SUIT-H5: Suit Short Set - Hanging (Option 5)

1. Hang short as shown.

2. Hook the short hanger through the

shirt hanger so short is at back.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 101

 SUIT - H5
3. Put the jacket on hanger over the short.
Do not button the jacket

4. Fold sleeves of jacket to the front of garment.

Place garment in poly-bag and tape bag shut. (Except for JC Penney, keep bags open.)

102 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SUIT - H5

9. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)
(Anchor hanger hooks to sides of carton.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 103

 SUIT-F1: Suit - Folded (Option 1)

1. Flip jacket over and lay flat.

FRONT VIEW BACK VIEW

2. With pant in side presentation, lay flat and fold in half by bringing
the bottom of the leg just below the waistband.
)

b) c)

Flip pant over so that pocket detail

is showing face up.

104 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SUIT - F1

3. Fold sleeves to the back.

4. Place folded pant on top of jacket as shown.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 105

 SUIT - F1

5. Fold the whole suit in half and place in poly-bag.

Tape the bag shut.

FRONT VIEW BACK VIEW

6. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)

106 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SUIT-F2: Suit - Folded (Option 2)

1. Fold shirt sleeves to the FRONT.

2. With pant in side presentation, lay flat and fold in half by bringing
the bottom of the leg just below the waistband.
)

b) c)

Flip pant over so that pocket detail

is showing face up.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 107

 SUIT - F2

3. Put the jacket over the shirt.

4. Fold sleeves to the back.

108 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 SUIT - F2

5. Place folded pant on top of jacket as shown.

6. Fold the whole suit set in half and place in poly-bag.

Tape the bag shut.

BACK VIEW

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 109

 SUIT - F2

7. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)

110 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 BLZR-H1: Blazer - Hanging (Option 1)

1. Put the jacket on a hanger.

2. Fold sleeves of jacket to the front of garment.

Place garment in poly-bag and tape bag shut. (Except for JC Penney, keep bags open.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 111

 3. Pack individual bags in carton alternating the garment direction.
(Poly-bags must be 4" longer than garments.)
(Anchor hanger hooks to sides of carton.)

112 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

BLZR-H2: Blazer - Hanging (Option 2)

1. Put the jacket on a hanger.

2. Fold sleeves to the back.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 113

 BLZR - H2

3. Fold the blazer in half and place in poly-bag.

Tape the bag shut. (Except for JC Penney, keep bags open.)

FRONT VIEW BACK VIEW

4. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)
(Anchor hanger hooks to sides of carton.)

114 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 BLZR-F1: Blazer - Folded (Option 1)

1. Flip jacket over and lay flat.

FRONT VIEW BACK VIEW

2. Fold sleeves to the back.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 115

 BLZR - F1

3. Fold the blazer in half and place in poly-bag.

Tape the bag shut.

FRONT VIEW BACK VIEW

4. Pack individual bags in carton alternating the garment direction.

(Poly-bags must be 4" longer than garments.)

116 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

VEST-F1: VEST/SLEEVELESS TOP/CAP SLEEVE TOP - Folded (Option 1)

FRONT VIEW

Vest Sleeveless Top Cap Sleeve Top

1. Lay garment flat, back facing up.

(Make sure back remains flat.)

Vest Sleeveless Top Cap Sleeve Top

2. Fold garment in half - bring bottom up to shoulder edge.

Vest Sleeveless Top Cap Sleeve Top

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 117

 VEST - F1

3. Place garment in poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

4. When using Master bags, reverse hanger direction in poly-bag.

When using individual bags, reverse hanger direction in carton.
(Individual poly-bags must be 4" longer than garments.)

118 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TOP-H1: Shirt - Hanging (Option 1)

1. Put garment on hanger

L/S Woven L/S Knit S/S Knit Sweater

2. Lay garment flat, back facing up. Fold sleeves to the back.
(Make sure that the sleeves are pulled back as far as the hanger allows.)

L/S Woven L/S Knit S/S Knit Sweater

3. Fold the shirt in half (back to back).

L/S Woven S/S or L/S Knit Sweater

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 119

 TOP - H1

4. Place one garment in an individual poly-bag.

HOOK INSIDE OF THE BAG. TAPE THE BAGS SHUT.

L/S Woven S/S or L/S Knit Sweater

Bag must be 4" longer than garment.

5. Reverse hanger direction of poly-bags in carton.

120 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TOP-H2: Shirt - Hanging (Option 2)

1. Put garment on hanger.

L/S Woven L/S Knit S/S Knit Sweater

2. Lay garment flat, back facing up. Fold sleeves to the back.
(Make sure that the sleeves are pulled back as far as the hanger allows.)

L/S Woven L/S Knit S/S Knit Sweater

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 121

 TOP - H2
3. Place one garment in an individual poly-bag.
HOOK STICKING OUTSIDE OF THE BAG. DO NOT TAPE THE BAGS

L/S Woven L/S Knit S/S Knit Sweater

Bag must be 4" longer than garment.

4. Fold the garment in half (back to back).

L/S Woven S/S or L/S Knit Sweater

BACK BACK BACK

L/S Woven S/S or L/S Knit Sweater

FRONT FRONT FRONT

122 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TOP - H2

5. Reverse hanger direction of poly-bags in carton.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 123

 TOP-H3: Shirt - Hanging (Option 3)

1. Put garment on hanger

L/S Woven L/S Knit S/S Knit Sweater

2. Lay garment flat, back facing up. Fold sleeves to the back.
(Make sure that the sleeves are pulled back as far as the hanger allows.)

L/S Woven L/S Knit S/S Knit Sweater

124 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TOP - H3

3. Fold the garment in half (back to back).

L/S Woven S/S or L/S Knit Sweater

4. Stack multiple garments, alternating the hanger direction.

(Quantity will be specified in Purchase Order packing requirements.)

L/S Woven S/S or L/S Knit Sweater

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 125

 TOP - H3

5. Place the final assortment of shirts into a MASTER poly-bag.

- HOOKS STICKING OUTSIDE OF THE BAG.
-Bags must be taped shut. (Except for JC Penney, keep bags open.)

L/S Woven S/S or L/S Knit Sweater

126 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

TOP - H3

6. Pack Master poly-bags in carton.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 127

 TOP-H4: Shirt - Hanging (Option 4)

1. Put garment on hanger

L/S Woven L/S Knit S/S Knit Sweater

2. Lay garment flat, back facing up. Fold sleeves to the back.
(Make sure that the sleeves are pulled back as far as the hanger allows.)

L/S Woven L/S Knit S/S Knit Sweater

128 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TOP - H4

3. Fold the garment in half (back to back).

L/S Woven S/S or L/S Knit Sweater

4. Place one garment in an individual poly-bag.

HOOK STICKING OUTSIDE OF THE BAG. TAPE THE BAGS SHUT.
(Except for JC Penney, keep bags open.)

L/S Woven S/S or L/S Knit Sweater

Bag must be 4" longer than garment.

5. Reverse hanger direction of poly-bags in carton.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 129

 TOP-H5: Shirt - Hanging (Option 1)

1. Put garment on hanger

2. Lay garment flat, front facing up.

At the lowest hem point, fold LEFT side in across front.
Fold RIGHT side in across so that both sides overlap.
(Make sure shirt remains flat.)

130 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 3. Holding each corner in place, fold bottom up to collar.

4. Stack multiple garments, alternating the hanger direction.

(Quantity will be specified in Purchase Order packing requirements.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 131

 TOP - H5

5. Place the final assortment of shirts into a MASTER poly-bag.

-HOOKS STICKING OUTSIDE OF THE BAG.
-Bags must be taped shut. (Except for JC Penney, keep bags open.)

6. Pack Master poly-bags in carton.

132 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TOP-F1: Shirt - Folded (Option 1)

FRONT VIEW

L/S Woven L/S Knit S/S Knit Sweater

1. Lay garment flat, back facing up.

Fold LEFT sleeve in across back. Fold RIGHT sleeve in across back over left sleeve.
(Make sure shirt back remains flat.)

L/S Woven L/S Knit S/S Knit Sweater

2. Bring bottom up to collar.

L/S Woven S/S or L/S Knit Sweater

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 133

 TOP - F1

3. Place shirt in a poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

L/S Woven S/S or L/S Knit Sweater

4. When using Master bags, alternate garment direction in bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

134 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TOP-F2: Shirt - Folded (Option 2)

FRONT VIEW

L/S Woven L/S Knit S/S Knit Sweater

1. Lay garment flat, back facing up.

Fold LEFT side over approximately 1/4 width of shirt.
Fold RIGHT side over the same amount as the left.
(Make sure shirt back remains flat.)

1 1 1

2 2 2

L/S Woven L/S Knit S/S Knit Sweater

2. Bring bottom up to collar.

W

L/S Woven S/S or L/S Knit Sweater

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 135

 TOP - F2

3. Place shirt in a poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

L/S Woven S/S or L/S Knit Sweater

4. When using Master bags, alternate garment direction in poly-bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

136 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TOP-F3: Shirt - Folded (Option 3)

FRONT VIEW

L/S Woven L/S Knit S/S Knit Sweater

1. Lay garment flat, back facing up.

Fold LEFT side over so that sleeve meets the right side of garment.
Fold RIGHT side over so that sleeve meets the left side of garment.
(Make sure shirt back remains flat.)

1 1
2 2

L/S Knit S/S Knit

1
1 2
2

L/S Woven Sweater

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 137

 TOP - F3
2. Bring bottom up to collar.
W

L/S Woven S/S or L/S Knit Sweater

3. Place shirt in a poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

L/S Woven S/S or L/S Knit Sweater

4. When using Master bags, alternate garment direction in poly-bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

138 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TOP-F4: Shirt - Folded (Option 4)

FRONT VIEW

L/S Woven L/S Knit S/S Knit Sweater

1. Lay garment flat, back facing up.

Fold LEFT sleeve in across back. Fold RIGHT sleeve in across back over left sleeve.
(Make sure shirt back remains flat.)

L/S Woven L/S Knit S/S Knit Sweater

2. Fold LEFT side over approximately 1/4 width of shirt. (Fold bottom hem up if needed to
Fold RIGHT side over the same amount as the left. achieve finished fold dimensions.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 139

 TOP - F4
3. Bring bottom up to collar.
W

L/S Woven S/S or L/S Knit Sweater

4. Place shirt in a poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

L/S Woven S/S or L/S Knit Sweater

5. When using Master bags, alternate garment direction in poly-bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

140 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TOP-F5: Shirt - Folded Option 5 (Cuff folded to front)

FRONT VIEW

L/S Woven L/S Knit Sweater

1. Lay garment flat, back facing up. 2. Fold RIGHT sleeve back over itself so that
Fold RIGHT side over approximately 1/4 width of shirt. cuff extends past right edge.

3. Fold LEFT side over approximately 1/4 width of shirt. (Fold bottom hem up if needed to achieve
Fold LEFT sleeve back over as shown. finished fold dimensions.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 141

 TOP - F5

4. Bring bottom up to collar.

L/S Woven L/S Knit Sweater

FINISHED FRONT

5. Place shirt in a poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

142 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TOP - F5

6. When using Master bags, alternate garment direction in bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 143

 TOP-F6: Shirt - Folded Option 6 (Cuff folded to the front)

1. Lay garment flat and fold up the cuff on right sleeve.

2. Flip garment over and lay flat, back facing up. 3. Fold RIGHT side over approximately
Fold LEFT side over approximately 1/4 width of shirt. 1/4 width of shirt.

4. Fold RIGHT sleeve back over itself so that cuff extends

past right edge.

144 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TOP - F6

5. Button the folded cuff and fold sleeve (Fold bottom hem up if needed to 6. Bring bottom up to collar.
to the front of the garment. achieve finished fold dimensions.)

BACK VIEW

FRONT VIEW BACK VIEW

7. Place shirt in a poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

8. When using Master bags, alternate garment direction in bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 145

 PKGD - F1: Packaged Woven Shirt - Folded (Option 1)

FRONT VIEW

Packaging materials needed to do folding method: (Verify with Brand Team)

• Plastic Butterfly - placed on neck closure button.
• Cardboard Neckband - placed under collar.
• Plastic Collar Ring - placed in neck opening.
• Tissue Paper - placed at center back of shirt.
• Folding Board - placed at center back of shirt on top of tissue paper.
• Plastic Clip - to secure side seams and bottom hem when folded up to collar.

1. Lay garment flat, back facing up and arms outstretched.

2A. Lay garment flat, back facing up. 2B. Fold RIGHT sleeve inward.
Fold LEFT sleeve inward. (Make sure shirt back remains flat.)

146 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 PKGD - F1

3. Fold right side seam to center of back. 4. Fold left side seam to center of back.
Pin side seams together at top.

clip placement

5. Fold bottom of shirt in thirds.

Bring bottom up to collar stand.
Pin each side of hem at folded edge.

6. Attach tie if style is a shirt/tie combo.

Fold bottom of tie to the back of shirt and
secure with clip.

clip placement

6A 6B
BACK VIEW

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 147

 PKGD - F1 7. Place shirt in bag and seal shut.

FRONT VIEW IN POLY-BAG

(Shirt w/ tie) (Shirt w/o tie)

8. Place quantity and assortment as indicated in the purchase order.

148 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 PKGD - F1

Alternate each shirt and each layer.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 149

 PKGD - F2: Packaged Woven Shirt - Folded (Option 2)

FRONT VIEW

Packaging materials needed to do folding method: (Verify with Brand Team)

• Plastic Butterfly - placed on neck closure button.
• Cardboard Neckband - placed under collar.
• Plastic Collar Ring - placed in neck opening.
• Tissue Paper - placed at center back of shirt.
• Folding Board - placed at center back of shirt on top of tissue paper.
• Plastic Clip - to secure side seams and bottom hem when folded up to collar.

1. Lay garment flat, back facing up and arms outstretched.

L/S Woven

2. Lay garment flat, back facing up. Fold RIGHT side over approximately 1/4 width of shirt.
Fold LEFT side over the same amount as the right. Pin side sleeves together at top.

150 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 PKGD - F2

3. Fold bottom of shirt up as shown in image. Pin each side of hem at folded edge.

Stiffener

Fold
BACK VIEW

4. Attach tie if style is a shirt/tie combo. Fold bottom of tie to the back of thirt and secure with clip.

Clip

5. Place shirt in bag and seal shut.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 151

 PKGD - F2

FRONT VIEW IN POLY-BAG

(Shirt w/ tie) (Shirt w/o tie)

(The bag may have built-in hanger hook as pictured in PKGD-F1.
Follow the style paperwork for specific bag requirements.)

6. Place quantity and assortment as indicated in the purchase order.

Alternate each shirt and each layer.

152 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 PKGD - F3: Packaged Woven Shirt - Folded (Option 3)

FRONT VIEW

Packaging materials needed to do folding method: (Verify with Brand Team)

• Plastic Butterfly - placed on neck closure button.
• Cardboard Neckband - placed under collar.
• Plastic Collar Ring - placed in neck opening.
• Tissue Paper - placed at center back of shirt.
• Folding Board - placed at center back of shirt on top of tissue paper.
• Plastic Clip - to secure side seams and bottom hem when folded up to collar.

1. Lay garment flat, back facing up and arms outstretched.

L/S Woven

2. Lay garment flat, back facing up. Fold RIGHT side over approximately 1/4 width of shirt.
Fold LEFT side over the same amount as the right.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 153

 PKGD - F3

3A. Lay garment flat, back facing up. 3B. Fold RIGHT sleeve inward.
Fold LEFT sleeve inward. (Make sure shirt back remains flat.)

3A 3B

4. Pin side sleeves together at top. 5. Fold bottom of shirt in thirds.

Bring bottom up to collar stand.
Pin each side of hem at folded edge.

6. Attach tie if style is a shirt/tie combo. Fold bottom of tie to the back of shirt and secure with clip.

Clip

154 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 PKGD - F3
7. Place shirt in bag and seal shut.
FRONT VIEW IN POLY-BAG

(Shirt w/ tie) (Shirt w/o tie)

(The bag may have built-in hanger hook as pictured in PKGD-F1.
Follow the style paperwork for specific bag requirements.)

8. Place quantity and assortment as indicated in the purchase order.

Alternate each shirt and each layer.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 155

 PKGD - F4: Packaged Woven Shirt - Folded (Cuff to the front) Option 4

FRONT VIEW

Packaging materials needed to do folding method: (Verify with Brand Team)

• Plastic Butterfly - placed on neck closure button.
• Cardboard Neckband - placed under collar.
• Plastic Collar Ring - placed in neck opening.
• Tissue Paper - placed at center back of shirt.
• Folding Board - placed at center back of shirt on top of tissue paper.
• Plastic Clip - to secure side seams and bottom hem when folded up to collar.

1. Lay garment flat, back facing up and arms outstretched.

L/S Woven

2. Flip garment over and lay flat, back facing up. 3. Fold RIGHT side over approximately
Fold LEFT side over approximately 1/4 width of shirt. 1/4 width of shirt.

156 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

PKGD - F4

4. Fold bottom of shirt up as shown in image. Pin each side of hem at folded edge.

Fold

BACK VIEW FRONT VIEW

5. Attach tie if style is a shirt/tie combo. Fold bottom of tie to the back of shirt and secure with clip.

6. Place shirt in bag and seal shut

FRONT VIEW IN POLY-BAG

(Shirt w/ tie) (Shirt w/o tie)

(The bag may have built-in hanger hook as pictured in PKGD-F1.
Follow the style paperwork for specific bag requirements.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 157

 PKGD - F4

7. Place quantity and assortment as indicated in the purchase order.

Alternate each shirt and each layer.

158 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TRSR-H1: BOYS Trouser Hanging (Option 1)

1. Place pant in side presentation (wearer's RIGHT as front view). Do not zip up or fasten the fly.
A: Invert front by folding the sides inwards at the first pleat and attach
hanger on INSIDE waistband to hold fly folded together.
B: Attach the other side of hanger to the OUTSIDE of the pant.

Outside Inside

1B 1A
Wearer's
RIGHT

Outside Inside Inside Outside

HANGER PLACEMENT HANGER PLACEMENT

FRONT VIEW BACK VIEW
(Hook should turn to the wearer's back
when looking at the FRONT view of the
garment containing the packaging.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 159

 TRSR - H1
2. Stack multiple garments. (Quantity will be specified in Purchase Order packing requirements.)

3. Place the final assortment of pants into a MASTER poly-bag.

HOOKS STICKING OUTSIDE OF THE BAG.

4. Fold pants in half. Tape the bag shut. (Except for JC Penney, keep bags open.)
2. 3. 4.

5. Pack Master bags in carton, alternating the bag direction.

(Anchor hanger hooks to sides of carton.)

160 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TRSR-H2: BOYS Trouser Hanging (Option 2)

1. Place pant in side presentation (wearer's LEFT as front view). Do not zip or fasten the fly.
A: Invert front by folding the sides inwards at the first pleat and attach hanger on INSIDE
waistband to hold fly folded together.
B: Attach the other side of hanger to the OUTSIDE of the pant.

Inside Outside

1B 1A
Wearer's
LEFT

Inside Outside Outside Inside

HANGER PLACEMENT HANGER PLACEMENT

FRONT VIEW BACK VIEW
(Hook should turn to the wearer's front
when looking at the FRONT view of the
garment containing the packaging.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 161

 TRSR - H2
2. Stack multiple garments. (Quantity will be specified in Purchase Order packing requirements.)

3. Place the final assortment of pants into a MASTER poly-bag.

HOOKS STICKING OUTSIDE OF THE BAG.

4. Fold pants in half. Tape the bag shut. (Except for JC Penney, keep bags open.)

2. 3. 4.

5. Pack Master bags in carton, alternating the bag direction.

(Anchor hanger hooks to sides of carton.)

162 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TRSR-H3: MENS Trouser Hanging (Option 3)

1. Place pant in side presentation (wearer's RIGHT as front view). Do not zip or fasten the fly.
A: Invert front by folding the sides inwards at the first pleat and attach hanger
on INSIDE waistband to hold fly folded together.
B: Secure inside of pant with a clip and attach the other side of hanger to
the OUTSIDE of the pant.

Outside Inside

1B 1A
Wearer's Clip placement
LEFT

Outside Inside Inside Outside

HANGER PLACEMENT HANGER PLACEMENT

FRONT VIEW BACK VIEW
(Hook should turn to the wearer's back
when looking at the FRONT view of the
garment containing the packaging.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 163

 TRSR - H3

2. A: Place a sheet of tissue paper on pant.

B: Fold pant in half.

3. Secure cuff to waistband with plastic clip (to prevent

pant leg from falling down).

4. Place pant in an INDIVIDUAL polybag and tape the bag shut.

(Except for JC Penney, keep bags open.)
2A. 2B. 3. 4.

Clip placement

Bag must be 4"

longer than pants.

5. Pack individual bags in carton, alternating the garment direction.

164 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TRSR-H4: MENS Trouser Hanging (Option 4)

1. Place pant in side presentation (wearer's LEFT as front view). Do not zip or fasten the fly.
A: Invert front by folding the sides inwards at the first pleat and attach hanger
on INSIDE waistband to hold fly folded together.
B: Secure inside of pant with a clip and attach the other side of hanger to
the OUTSIDE of the pant.

Inside Outside

1A 1B
Clip placement
Wearer's
LEFT

Inside Outside Outside Inside

HANGER PLACEMENT HANGER PLACEMENT

FRONT VIEW BACK VIEW
(Hook should turn to the wearer's front
when looking at the FRONT view of the
garment containing the packaging.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 165

 TRSR - H4

2. A: Place a sheet of tissue paper on pant.

B: Fold pant in half.

3. Secure cuff to waistband with plastic clip (to prevent

pant leg from falling down).

4. Place pant in an INDIVIDUAL polybag and tape the bag shut.

(Except for JC Penney, keep bags open.)
2A. 2B. 3. 4.

Clip placement

Bag must be 4"

longer than pants.

5. Pack individual bags in carton, alternating the garment direction.

166 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TRSR-H5: MENS Trouser Hanging (Option 5)

1. Place pant in side presentation (wearer's LEFT as front view). Do not zip or fasten the fly.
A: Invert front by folding the sides inwards at the first pleat and attach hanger
on INSIDE waistband to hold fly folded together.
B: Secure inside of pant with a clip and attach the other side of hanger to
the OUTSIDE of the pant.

Inside Outside

Wearer's 1A 1B
LEFT
Clip placement

Inside Outside Outside Inside

HANGER PLACEMENT HANGER PLACEMENT

FRONT VIEW BACK VIEW
(Hook should turn to the wearer's front
when looking at the FRONT view of the
garment containing the packaging.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 167

 TRSR - H5
2. A: Flip pant over so that Right side is facing up.
B. Place a sheet of tissue paper on pant.
C: Fold pant in half.

3. Secure cuff to waistband with plastic clip (to prevent

pant leg from falling down).

4. Place pant in an INDIVIDUAL polybag and tape the bag shut.

(Except for JC Penney, keep bags open.)

2B. 2C. 3. 4.
Clip placement

Bag must be 4"

longer than pants.

5. Pack individual bags in carton, alternating the garment direction.

168 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 BOT - H1: Bottom - Open Presentation Hanging (Option 1)
1. Place pant in Open presentation.
(Prior to hanging, all zippers, hook and eye & buttons should be closed unless otherwise specified.)

2. Position hanger centered on waistband. (Adjustments to hanger position may be required if the
hanger clips cover product information.)
For larger sized garments, the width may need to extend beyond the hanger, equally on each side.
Do not fold garment inward to fit hanger.
Hanger hook should turn to the wearer's RIGHT when looking at the FRONT of the garment
(Unless specified otherwise by customer).

3. Stack multiple garments. (Quantity will be specified in Purchase Order packing requirements.)

4. Place the final assortment of pants into a MASTER poly-bag.

HOOKS STICKING OUTSIDE OF THE BAG. Tape the bag shut.
(Except for JC Penney, keep bags open.)

2.

Casual Pant Flat Front Dress Pant Pleated Dress Pant

3.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 169

 BOT - H1
4. 5.

6. Pack Master bags in carton, alternating the bag direction.

(Anchor hanger hooks to sides of carton.)
(Individual poly-bags must be 4" longer than garments.)

170 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 BOT - H2: Bottom - Open Presentation Hanging (Option 2)

1. Place pant in Open presentation.

(Prior to hanging, all zippers, hook and eye & buttons should be closed unless otherwise specified.)

2. Position hanger centered on waistband. (Adjustments to hanger position may be required if the
hanger clips cover product information.)
For larger sized garments, the width may need to extend beyond the hanger, equally on each side.
Do not fold garment inward to fit hanger.
Hanger hook should turn to the wearer's RIGHT when looking at the FRONT of the garment
(Unless specified otherwise by customer).

3. Flip pant over and fold in half by bringing the bottom of the legs up to the top of the pant.

4. Stack multiple garments, alternating the hanger direction.

(Quantity will be specified in Purchase Order packing requirements.)

5. Place the final assortment of pants into a MASTER poly-bag.

HOOKS STICKING OUTSIDE OF THE BAG. Tape the bag shut.
(Except for JC Penney, keep bags open.)

2. 3.

4.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 171

 BOT - H2

5.

6. Pack Master bags in carton, alternating the bag direction.

172 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 BOT - H3: Bottom - Open Presentation Hanging FLAT (Option 3)

1. Place pant in Open presentation.

(Prior to hanging, all zippers, hook and eye & buttons should be closed unless otherwise specified.)

2. Position hanger centered on waistband. (Adjustments to hanger position may be required if the
hanger clips cover product information.)
For larger sized garments, the width may need to extend beyond the hanger, equally on each side.
Do not fold garment inward to fit hanger.
Hanger hook should turn to the wearer's RIGHT when looking at the FRONT of the garment
(Unless specified otherwise by customer).

3. Stack multiple garments, alternating the hanger direction.

(Quantity will be specified in Purchase Order packing requirements.)

4. GARMENTS WILL BE FLAT PACKED.

Place the final assortment of pants into a MASTER poly-bag.
- HOOKS STICKING OUTSIDE OF THE BAG.
- Bags must be taped shut. (Except for JC Penney, keep bags open.)
Pant
2. 3. 4.

Short
2. 3. 4.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 173

 BOT - H3

Skirt / Scooter
2. 3. 4.

5. Pack Master bags in carton, alternating the bag direction.

174 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TRSR - F1: Casual Trouser - Folded (Option 1)

1. Do not close zippers or waistbands.

2. With pant in side presentaion, lay flat. Invert front by tucking in the waistband and zipper side.
The side facing upward not showing product information.

3. Fold the pant in half by bringing the bottom of the leg just BELOW the waistband.

4. Turn pant over so that product information is facing customer.

5. Place pant in a poly-bag.

(Quantity will be specified in purchase order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

2. 3. 4.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 175

 TRSR - F1
5.

6. When using Master bags, alternate garment direction in bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

176 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TRSR - F2: Casual Trouser - Folded (Option 2)

1. Do not close zippers or waistbands.

2. With pant in side presentaion, lay flat. Invert front by tucking in the waistband and zipper side.
The side facing upward not showing product information.

3. Fold the pant in half by bringing the bottom of the leg up to the TOP of the waistband.

4. Turn pant over so that product information is facing customer.

5. Place pant in a poly-bag.

(Quantity will be specified in purchase order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

2. 3. 4.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 177

 TRSR - F2

5.

6. When using Master bags, alternate garment direction in bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

178 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TRSR - F3: Casual Trouser - Folded (Option 3)

1. Do not close zippers or waistbands.

2. With pant in side presentaion, lay flat. Invert front by tucking in the waistband and zipper side.
The side facing upward not showing product information.

3. Fold the pant in thirds.

1st fold: Bring the bottom of leg up to the bottom of rear pocket.

4. 2nd fold: Bring fold up to the BOTTOM of the waistband.

5. Turn pant over so that product information is facing customer.

6. Place pant in a poly-bag.

(Quantity will be specified in purchase order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

2. 3. 4.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 179

 TRSR - F3

5. 6.

7. When using Master bags, alternate garment direction in bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

180 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TRSR - F4: Casual Trouser - Folded (Option 4)

1. Do not close zippers or waistbands.

2. With pant in side presentaion, lay flat. Invert front by tucking in the waistband and zipper side.
The side facing upward not showing product information.

3. Fold the pant leg in thirds.

1st fold: Bring the bottom of leg up just BELOW crotch (thigh) level.

4. 2nd fold: Bring fold up to the BOTTOM of the waistband.

5. Turn pant over so that product information is facing customer.

6. Place pant in a poly-bag.

(Quantity will be specified in purchase order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

2. 3. 4.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 181

 TRSR - F4

5. 6.

7. When using Master bags, alternate garment direction in bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

182 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 TRSR - F5: Casual Trouser - Folded (Option 5)

1. Do not close zippers or waistbands.

2. With pant in side presentaion, lay flat. Invert front by tucking in the waistband and zipper side.
The side facing upward not showing product information.

3. Fold the pant leg in thirds.

1st fold: Bring the bottom of leg up to crotch (thigh) level.

4. 2nd fold: Bring fold up to the TOP of the waistband.

5. Turn pant over so that product information is facing customer.

6. Place pant in a poly-bag.

(Quantity will be specified in purchase order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

2. 3. 4.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 183

 TRSR - F5

5. 6.

7. When using Master bags, alternate garment direction in bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

184 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 BOT - F1: Casual Bottom - Flat Folded (Option 1)

1. Do not close zippers or waistbands.

2. Lay pant flat and fold left and right legs together.
The side facing upward not showing product information.
3. Fold the pant in half by bringing the bottom of the leg just BELOW the waistband.
4. Turn pant over so that product information is facing customer.
5. Place pant in a poly-bag.
(Quantity will be specified in purchase order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

*ALL GIRLS BOTTOMS ARE FLAT FOLDED*

2. 3. 4. 5.

6. When using master bags, alternate garment direction in bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 185

 BOT - F2: Casual Bottom - Flat Folded (Option 2)

1. Do not close zippers or waistbands.

2. Lay pant flat and fold left and right legs together.
The side facing upward not showing product information.
3. Fold the pant in half by bringing the bottom of the leg to the TOP of the waistband.
4. Turn pant over so that product information is facing customer.
5. Place pant in a poly-bag.
(Quantity will be specified in purchase order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)
*ALL GIRLS BOTTOMS ARE FLAT FOLDED*

2. 3. 4. 5.

6. When using Master bags, alternate garment direction in bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

186 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 BOT - F3: Casual Bottom - Flat Folded (Option 3)

1. Do not close zippers or waistbands.

2. Lay pant flat and fold left and right legs together.
The side facing upward not showing product information.
3. Fold the pant leg in thirds.
1st fold: Bring the bottom of leg up to crotch (thigh) level.
4. 2nd fold: Bring fold up to the BOTTOM of the waistband.
5. Turn pant over so that product information is facing customer.
6. Place pant in a poly-bag.
(Quantity will be specified in purchase order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)
*ALL GIRLS BOTTOMS ARE FLAT FOLDED*
2. 3. 4. 5.

6. When using Master bags, alternate garment direction in bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 187

 BOT - F4: Casual Bottom - Flat Folded (Option 4)

1. Do not close zippers or waistbands.

2. Lay garment flat and fold in half.
The side facing upward not showing product information.
3. Fold the garment up one third of the total length.
4. Turn garment over so that product information is facing customer.
5. Place the garment in a poly-bag.
(Quantity will be specified in purchase order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)
*ALL GIRLS BOTTOMS ARE FLAT FOLDED*
FRONT VIEW BACK VIEW

2. 3. 4. 5.

188 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

BOT - F4

6. When using Master bags, alternate garment direction in bag.

When using individual bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 189

 JKT - H1: Outerwear Jacket - Hanging (Option 1)

1. Put the jacket on a hanger.

2. Fold sleeves of jacket to the front of garment.

Place garment in poly-bag and tape bag shut. (Except for JC Penney, keep bags open.)

3. When using individual bags, reverse hanger direction in carton.

When using Master bags, reverse hanger direction in poly-bag.
(Individual poly-bags must be 4" longer than garments.)
(Anchor hanger hooks to sides of carton.)

190 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 JKT - F1: Outerwear Jacket Folded Option 1 - (No Hood)

FRONT VIEW

1. Lay garment flat, back facing up.

Fold LEFT sleeve in across back, Fold RIGHT sleeve in across back over left sleeve.
(Make sure jacket back remains flat.)

1
2

2. Bring bottom up to collar.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 191

 JKT - F1

3. Place jacket in a poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

4. When using Master bags, alternate garment direction in bag.

When using indiviudal poly-bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

192 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

JKT - F2: Outerwear Jacket Folded Option 2 - (With Hood)

FRONT VIEW

1. Lay garment flat, back facing up.

First, fold HOOD down.
Fold LEFT sleeve in across back, Fold RIGHT sleeve over left sleeve.
(Make sure jacket back remains flat.)

2
3

2. Bring bottom up to collar.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 193

 JKT - F2

3. Place jacket in a poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

4. When using Master bags, alternate garment direction in bag.

When using indiviudal poly-bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

194 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 JKT - F3: Outerwear Jacket Folded Option 3 -(No Hood)

FRONT VIEW

1. Lay garment flat, back facing up.

Fold LEFT side over approximately 1/4 width of jacket.
Fold RIGHT side over the same amount as the left.
Make sure jacket back remains flat.

1 1

2 2

2. Bring bottom up to collar.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 195

 JKT - F3

3. Place jacket in a poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

4. When using Master bags, alternate garment direction in bag.

When using individual poly-bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

196 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

JKT - F4: Outerwear Jacket Folded Option 4 -(With Hood)

FRONT VIEW

1. Lay garment flat, back facing up.

First, fold HOOD down.
Fold LEFT side over approximately 1/4 width of jacket.
Fold RIGHT side over the same amount as the left.
(Make sure jacket back remains flat.)

Fold back

2
3

2. Bring bottom up to collar.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 197

 JKT - F4

3. Place jacket in a poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

4. When using Master bags, alternate garment direction in bag.

When using individual poly-bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

198 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 JKT - F5: Outerwear Jacket Folded Option 5 -(With or Without Hood)

FRONT VIEW

1. Lay garment flat, back facing up.

If hooded garment, fold HOOD down first.
Fold LEFT sleeve in across back. Fold RIGHT sleeve in across back over left sleeve.
(Make sure jacket back remains flat.)
1

1
2

2
3

2. Place jacket in a poly-bag.

(Quantity will be specified in Purchase Order packing requirements.)
Tape the bag shut. (Except for JC Penney, keep bags open.)

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 199

 JKT - F5

4. When using Master bags, alternate garment direction in bag.

When using individual poly-bags, reverse bag direction in carton.
(Individual poly-bags must be 4" longer than garments.)

200 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

UNIVERSAL PACKING LIST

Messr, Date:……………………..
F&T Apparel LLC..,
Metroplex Corporate Center #1 4000,
Chemical Road Suite 500,
Plymouth Meeting, PA 19462-1708
U.S.A

P.O.# :
STYLE # :
L/C # :

BOX LPN NUMBER COLOR SIZE TOTAL TOTAL

NUMBER # (CTN BARCODE BOXES PIECES
STICKER #)

GRAND TOTAL:
Total Pieces:
Total Cartons:
Carton Size:
Net Weight:
Gross Weight:

SUMMARY

COLOR SIZE TOTAL

TOTAL:

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 201

 Carton Box Specifications:
- Corrugated carton should be double wall (also known as 5 ply) construction
as below.

- Using metal fasteners such as wire staples should seal Manufacturer’s joints.

- Manufacturer s joint should have a minimum overlap of 1 1/4" (3.25cm).

- Manufacturer s joint staples should be attached within 1" (2.5cm) from the top and 1"
(2.5cm) from the bottom. All other staples should be attached with a minimum of 1"
(2.5cm) spacing but no greater than 2 1/2" (6.5cm) apart.

- Cartons should be constructed with minimum bursting strength of 275 lbs./sq. in.

- Standard test conditions should adhere to "Tropical” conditions.

(Temperature 90deg. F (32 dig Cent.) and Relative Humidity 90%.)

202 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

Box Taping:
- No straps to be used around boxes
- Use quality waterproof tape to close boxes.
- H Pattern must be used to tape boxes. Poor quality tapes may fail in hot dry climates.
- Water activated adhesive tapes must not be used.

Carton markings:
For JACKSONVILLE FL. distribution

F&T Apparel Style: ........................... P/O#: .........................

COLOR SIZE TOTAL

PIECES




























MADE IN...




- The above format has to be printed on both narrow sides of the carton.
- The markings must be minimum 10" x 6" ( 25cm x 15cm) -All information must be
clearly and legibly written in English.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 203

 Carton markings:
For LONG BEACH CA distribution

F&T Apparel Style: ........................... P/O#: .........................

COLOR SIZE TOTAL

PIECES

MADE IN...






- The above format has to be printed on both narrow sides of the carton.
- The markings must be minimum 10" x 6" ( 25cm x 15cm) -All information must be
clearly and legibly written in English.

204 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

Box Dimensions:

Shipping cartons must comply with the following standards:

- MINIMUM: No single dimension can be less than 5 cm, length and width no
less than 15 cm each, with a minimum weight of 1.8 kg.

- MAXIMUM: No single dimension can exceed 91 cm, with a maximum

weight of 18.2 kg. Total carton dimensions (length + width + height)
cannot exceed total 152 cm. Maximum carton height should be no more
than 75% of the carton length.

- Boxes must be packed so that there are no empty spaces between the garments
and the sides of the box. However the garments should not be crushed when
boxes are closed.

- The gross weight of the carton must be less than or equal to the chargeable
weight (Kg/Vol.)

- Dimensions must be shown in Centimeters.

- Weight must be shown in Kilograms.

- If the gross weight is less than 5% the chargeable weight (Kg/Vol.), then the
vendor/agent should contact F&T Apparel to obtain an approval before
ordering the cartons from their suppliers.

Gross weight:

Weight of the garments plus the weight of the carton box.

Chargeable weight (Kg/Vol.) calculation:

Box height (cm) X Box width (cm) X Box length (cm) = Kg/Vol.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 205

 APPENDIX

JC PENNEY (Folded orders)

A. JCP Catalog - All garments are in self-sealed bags.

B. JCP Non-catalog individual bags - All bags NOT sealed (except where there is more than one piece
in the product category such as suits and sets).

JC PENNEY CATALOG SHAKE TEST:

General Requirements Catalog

Shake bag up and down If garment slips in bag, add
Front View stiffener or fold smaller

Clips

Stiffener

Back view

- No hangers or other items should be inside the bag other than what is illustrated in this document.

- No hooks or other items attached to bag shall be allowed unless approved through packaging
engineering. Hooks extending greater than 1" must be taped down.

- Bags must be permanently sealed.

- Merchandise must not slip in bag. Merchandise must be as compact as possible.

- Maximum apparel bag is 14" x 19". Fold bag tight against merchandise. (No void.)

- These instructions are required folding guidelines. Adjustment to folds may be necessary to fit the bag
sizes.

- The "BACK" of the bag is where it is sealed and labeled.

- Merchandise not illustrated here should be folded similarly to like items or packaging engineering may
be contacted.

206 · F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00

 APPENDIX (cont'd)

Stiffener or not - Catalog

Bi-folding with stiffener

Back view Front view

Seal

Stiffener

Packaged item
Selling unit label

Fold

Tri-folding without stiffener

Back view Front view

Seal

Fold
Packaged item
Selling unit label

Fold
- Tri-fold may allow elimination of stiffener.

- Stiffener cost is approximately $.03 per item.

- See list below for items not requiring stiffener.

Items not requiring stiffeners - Catalog

Jeans Heavy twill pants Heavy knits
Corduroys Knits Heavy flannel
Sweat pants Overalls Bras
Lycra leggings Bulky items Small items
Shorts Swim suits Panties
Pajamas
These items may require tri-fold to prevent slipping.
These items must be folded as compactly as possible so they do NOT slip in the bag.
There must be NO excess bag beyond the item.

F&T APPAREL · UNIVERSAL PACKING MANUAL VERSION 1.00 · 207