Scribd
Upload
70 views1 page

Footing Mark: F2: I. Input Data

This document provides input data and calculations for assessing the footing capacity of Footing F2 for a school building in Manila, Philippines. It includes the dimensions and reinforcement of the footing, properties of the soil and concrete, and applied loads from the column and soil. Calculations are shown to determine the maximum and minimum bearing pressures on the soil from the dead load, live load, weight of the footing and overlying soil. Forces are resolved and combined moments are calculated in two directions, Mx and Mz, to evaluate the demand on the footing.

Uploaded by

Jaycee Pagador
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views1 page

Footing Mark: F2: I. Input Data

This document provides input data and calculations for assessing the footing capacity of Footing F2 for a school building in Manila, Philippines. It includes the dimensions and reinforcement of the footing, properties of the soil and concrete, and applied loads from the column and soil. Calculations are shown to determine the maximum and minimum bearing pressures on the soil from the dead load, live load, weight of the footing and overlying soil. Forces are resolved and combined moments are calculated in two directions, Mx and Mz, to evaluate the demand on the footing.

Uploaded by

Jaycee Pagador
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Project Title: Structural Assessment and Detailed Engineering Design for the Repair and Retrofitting of Government Buildings

ent Buildings in Preparation for "The Big One" Contract Package 2


Location: Havana Building - Juan Sumulong Elementary School (Manila City)
Client : Department of Public Works and Highways - National Capital Region
Subject : FOOTING CAPACITY INVESTIGATION

Footing Mark : F2
I. INPUT DATA

421.2 Strength reduction factor


Table 421.2.2 (e/f) φ tension 0.90
Table 421.2.1 (b) φ shear 0.75
[Link] Concrete cover 0.075 m

Given Footing Dimension:


Along b 2.4 m
Along h 2.4 m
depth of footing, e 1.5 m
thickness of footing , g 0.38 m
Effective depth, dact = t - cover - 1.5db 0.275 m
arm 1.12 m

Given Footing Reinforcement:


Rebar diameter
Along b 0.02 m
Along h 0.02 m
c-c Spacing
ALong b 0.2 m
Along h 0.2 m

Given Column Dimension


Column, j 1 m
Column, k 0.2 m
L 1.1 m
m 0.7 m

Unit wt of soil, gsoil 18 kN/m3

Unit wt of concrete, gc 23.6 kN/m3


Concrete compressive strength, fc' 10.349 MPa
Steel yield strength, fy 231 MPa
Allowable bearing pressure (1.5 m below the ground) 100 kPa

II. SOLVING FOR BEARING PRESSURES


Determine max and min bearing pressure on soil :
- Use unfactored loads
- Include weight of pedestal
- Include weight of footing
- Include weight of soil on top of footing
- Resolve shear forces into equivalent moment forces on footing
- Moment forces are in two directions Mx and Mz
- Add Moment due to DL and LL

Pedestal Load/ Column Load = 0.00 kN


Weight of Footing = 51.66 kN
Weight of Soil = 112.09 kN

Fx Fy Fz Mx My Mz
Node No. Footing No. Load Case
kN. kN. kN. kNm. kNm. kNm.
297 1 DL -2.18 497.64 8.54 13.99 0.03 5.54
F2
2 LL -0.19 66.32 1.89 3.03 0.00 0.27

Demand Forces FY (add


Node No. Footing No. Load Case MX MZ pedestal)

Mx1+Mx2 My1+My2 Fz1+Fz2


1 DL 13.99 5.54 497.64
297 F2

You might also like