See discussions, stats, and author profiles for this publication at: https://www.researchgate.
net/publication/313726346
Components of Drip Irrigation System
Presentation · February 2017
DOI: 10.13140/RG.2.2.13180.33926
CITATIONS READS
0 13,781
1 author:
Amresh Chandra Pandey
Birsa Agricultural University
60 PUBLICATIONS 21 CITATIONS
SEE PROFILE
Some of the authors of this publication are also working on these related projects:
Krishi Vigyan Kendra View project
All content following this page was uploaded by Amresh Chandra Pandey on 15 February 2017.
The user has requested enhancement of the downloaded file.
A presentation
By
Dr Amresh Chandra Pandey
Scientist (Agril. Engg.)
Krishi Vigyan Kendra, Latehar
Birsa Agricultural University
Ranchi Jharkhand
Email-
[email protected] Mob. No. 9934183442
Drip Irrigation Layout
Components of Drip System
Head Control Unit
Water Carrier System
Water Distribution System
Fittings and Accessories
Head Control System
Air cum vacuum breaker valve
Non return valve assembly
Fertilizer Tank, Throttle Valve with
Manifold
Filtration unit with pressure gauges
Head Control Unit
Hydro cyclone + Sand + Disc
filter with Fertilizer tank
Head Control Unit
To remove entrapped air
and vacuum
Air Release/
Vacuum Breaker
Air Release Valve
Manifold
Non return valve
To stop water and
chemicals/fertilizers retuning back
to water source
Throttle valve with
manifold
To create pressure difference for
operating fertilizer tank/venturi
Fertigation Tank
Fertigation Equipment with
Throttle Valve Manifold
Connection
Filters – The must
Hydro cyclone filter
Working
To remove particles heavier than
water which clog screen filter
Sand filters
Horizontal Vertical
Sand level
To filter Algae, Leaves, Small
Creatures
Screen Filter Plastic
Screen Filter Metal
Disc Filter Metal
To Filter Sand/Particles
larger than Dripper path
Pressure Gauge
To know the operating pressure and
check the clogging of the filters
Water Carrier System
Main Line
Sub Main Line
Control Valves
Flush Valves
PVC Pipes & HDPE Pipes for
Mainline and Sub-main
Control & Flush Valves
BALL VALVE GATE VALVE
Sizes: 20 mm to 90 mm Sizes: 1½ inch and 2 inch BSP/NPT
For controlling sections, sub-mains
For cleaning mains and sub-mains
Control & Flush Valves
THROTTALE VALVE
SUBMAIN FLUSH VALVE
Sizes: 40/50mm & 50/63 mm Sizes: ½ inch to 4 inch
For controlling sections, sub-mains
For cleaning mains and sub-mains
Water Distribution System
Plain Lateral
Emitters
Emitting Pipe
Grommet
Start Connector
Water Distribution System
Nipple
End Cap
Spaghetti / Extension tube
Barbed Connector
Plain Lateral
Polytube with online Drippers
Drippers and Emitters
J-TURBO KEY PLUS
J-Turbo Key Plus - 2lph,
4lph, 8lph, 14lph
J-SC PC PLUS
J-SC PC Plus - 2 lph, 4lph & 8 lph
J-LOC Flow: 4lph, 8lph, 16 lph
Emitting pipe
Emitting pipe can be placed above/below soil
Dripper spacing and discharge depends on
soil and water requirement
J-Loc dripper (For easy cleaning)
Parts of Dripper Turbo Key / SC
PC Plus
Turbo SC PC Plus
Turbo key Plus
Grommet & Start connector
To connect poly tube and sub-main
Polyfittings
End cap ‘8’ shape
Joiner
End cap ‘O’ shape
Barbed connector
Drippers installed on poly
tube with Spaghetti
Mini Sprinkler & Jets
J-MINI SPRINKLER J-JETS
Flow: 42 lph, Pattern: Full Circle/Half Circl
Diameter: 1.8 m
Flow Range: 16 lph to 110 lph (at 1atm pressure)
Diameter: 3.3 m to 8.0 m
Sprinklers & Jets are use for
spraying water on larger area
Thanks
View publication stats
