1

yd/0609
 2
yd/0609
1) PIPE & PIPE 3) PIPE FITTING & FLANGE
• Butt-weld • Elbow
• Stub-in • Tee
• Branch conn • Reducer

2) PIPE & FLANGE 4) PIPE & FITTING

• Slip-on • For 1-1/2” pipe & below
• Welding Neck • Threaded
• Threaded • Socket-weld
• Socket-weld
• Lap Joint
3
yd/0609
 4
yd/0609
 5
yd/0609
 6
yd/0609
 Branch
tee

union
branch coupling

Straight stub-in

Lateral
stub-in
7
yd/0609
 8
yd/0609
 9
yd/0609
 10
yd/0609
 11
yd/0609
 STRUCTURE
• Primary • Secondary

TYPE OF REINFORCEMENT
• Water tight doubler • Non-tight doubler
• Water tight pipe sleeve • Non-tight pipe sleeve
• Insert Plate • Tubing - A0 / A60 / W.T.
• Pipe Coupling • “CSD” Plug / “Rotex”
Plug

12
yd/0609
 13
yd/0609
 14
yd/0609
 15
yd/0609
 16
yd/0609
 17
yd/0609
 18
yd/0609
 19
yd/0609
 GUIDE SUPPORT
Steel with brass /
VALVE HANDLE
bronze bushing
INDICATOR & PIPE
SLEEVE AS GUARD
STEEL POLISHED ROD

STUFFING BOX &

W.T. GLAND
VALVE ATTACHMENT :
1) Rising Stem
2) Non-rising Stem
3) Fork Type JOINT :
4) Butterfly Valve 1) Universal Cplg
2) Bevel Gear

20
yd/0609
 21
yd/0609
 Gate valve

Attachment Guide support

Extension rod

Attachment
Bevel gear Universal Butterfly
Cplg Valve

Guide support W.T. gland

stuffing box

Extension rod

Guide support
Butterfly valve
position handle

Handwheel
22
yd/0609
Handwheel

W.T. gland
Position stuffing box
indicator

23
yd/0609
• Firewater system

• Sewage system
• Dirty oil system
• Bilge system
24
yd/0609
 • The shore connection piece shall be
kept near the filling station on either
• The flange made of steel shall be side of the vessel.
installed (welded) at the port & • It shall be kept together with bolts &
starboard shore connections. washers 4sets-
4sets-16mm (5/8”
(5/8”) x 50mm (2”
(2”)
LG, gasket 1pc-
1pc-10.5kg/cm2(150 psi)
psi) 25
yd/0609
 26
yd/0609
 • The flange made of steel shall
be installed (welded) at the
port & starboard shore
connections.
• This deck facilities is adapted
from the marine pollution
regulation #19
• The flange is designed to
accept pipes up to a max.
internal dia.
dia. Of 125mm (5”
(5”) &
shall be flat face
• The flange shall complete
with 6sets-
6sets-M20 x 60mm LG
bolts & nuts with a gasket of
oil proof material, suitable for
service pressure of 0.6mPA
(6 bar). Non asbestos gasket
shall be full face, 1.5mm
thickness & suitable for
service pressure of 1.0mPA
(10bar)
27
yd/0609
 • The flange made of steel
shall be installed (welded)
at the port & starboard
shore connections
together with blind flange.
• This deck facility is
adapted from the marine
pollution regulation #11
• Both flange shall be flat
face & provided with
4sets-
4sets-M16 x 60mm LG
bolts & nuts together with
a suitable gasket.
• Flange & gasket shall be
suitable for a service
pressure of 0.6mPA (6
bar)

28
yd/0609
 29
yd/0609
• Top plug & coupling • Tank check valve
• Extended pipe with (ball float) -
cap single/double
• Extended pipe with • Gooseneck
self-closing valve
• Bottom striking
plate

30
yd/0609
 • SW - SEA WTR • PW - POTABLE WTR
• DW - DRILL WTR • BL - BILGE
• FO - FUEL OIL • MC - MUD
• VOID - VOID CONTAIMINATED
• BO - BASE OIL • DO - DIRTY OIL
31
yd/0609
NOTE: SELF CLOSING VALVE TO BE INSTALLED ONLY FOR OIL TANK SOUNDING
SOUNDING PIPE TERMINATING BELOW
WEATHER DECK
32
yd/0609
 33
yd/0609
 34
yd/0609
 35
yd/0609
 36
yd/0609
 ITEM 7
INSECT SCREEN - SEWAGE
FLAME SCREEN - OIL

37
yd/0609
Coaming / drip pan
(for oil tank)

38
yd/0609
• Butt-weld ends
• Type 1 - Concentric reducer
• Type 2 - Half pipe with cap

39
yd/0609
 40
yd/0609
 41
yd/0609
 • RATIO OF CLEAR THROUGH STRAINER TO PIPE
AREA IS 2.7:1
• ALL DRAINS IN AREAS WITH DECK COVERING TO
BE ELEVATED TO DECK COVERING
42
yd/0609
 43
yd/0609
 44
yd/0609
• U-BOLT • PIPE SHOE • PIPE CLAMP

45
yd/0609
• THIS TABLE IS APPLICABLE FOR MAX. SPACING BETWEEN PIPE
SUPPORTS FOR HORIZONTAL STRAIGHT RUN OF STANDARD AND
HEAVIER PIPE AT MAX. OPERATING TEMP. OF 750 ºF (300 º C)
46
yd/0609
 47
yd/0609
 48
yd/0609
 49
yd/0609
 50
yd/0609
 51
yd/0609
 52
yd/0609
 • PIPE SUPPORT DIRECTLY WELDED TO SIDE SHELL
IS NOT ALLOWED. DOUBLER IS TO BE USED.

53
yd/0609
 • ALL BOLTS AND NUTS TO BE CADMIUM
PLATED SAE J429 Gr.8 AND SAE J995
Gr.8, HEAVY DUTY
• ALL METAL COMPONENTS OF THE
STAUFF CLAMPS TO BE ZINC PLATED.
54
yd/0609
 55
yd/0609
 56
yd/0609
 57
yd/0609
 58
yd/0609