Scribd
Upload
825 views2 pages

Conplast CWP

CONPLAST CWP is a crystalline waterproofing admixture added to concrete to reduce water permeability and absorption. It chemically reacts with free lime in concrete to form crystals that block pores. It becomes an integral part of the concrete. It is recommended for use in basements, foundations, tunnels and other structures requiring waterproofed concrete. It provides easy application as a liquid admixture and improves the water resistance of concrete without affecting its strength. Proper curing and an appropriate joint sealing system are also required for effective waterproofing.

Uploaded by

awliyaizzati
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
825 views2 pages

Conplast CWP

CONPLAST CWP is a crystalline waterproofing admixture added to concrete to reduce water permeability and absorption. It chemically reacts with free lime in concrete to form crystals that block pores. It becomes an integral part of the concrete. It is recommended for use in basements, foundations, tunnels and other structures requiring waterproofed concrete. It provides easy application as a liquid admixture and improves the water resistance of concrete without affecting its strength. Proper curing and an appropriate joint sealing system are also required for effective waterproofing.

Uploaded by

awliyaizzati
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

3

ID- NOV. 2016


CONPLAST CWP constructive solutions

Integral Crystalline Waterproofing


For Concrete

Uses Recommended mix proportion

To reduce water permeability and absorption by  Cement minimum 350 kg/m3


chemically reacting with free lime to produce  Water cement ratio maximum 0.45
crystalline that can be act as pore blocking.  Slump 120 ± 20mm – 180 ± 20mm
 Dosage 0.4 – 1.0 % by weight of
CONPLAST CWP becomes an integral part of cement
concrete.
Specification clauses
Used for basements floor and walls,
foundations, pile cap, reservoirs, sewage and The concrete mix shall consist of:
water treatment plants, tunnel and subway - Cement or Sulphate resisting cement to
structures, underground vaults, parking ASTM C150.
structures, precast components. - 5-25mm graded gravel aggregates size
57 of ASTM C33.
Advantages - Graded sand to ASTM C33.
- The concrete shall be fully compacted
 Easily to apply – manufactured in the by mechanical vibration and shall be
form of liquid then cured using FOSROC CONCURE
 Becomes an integral part of the series, or controllable condition wet
concrete hessian.

Description Effects of Overdosing

An over dosage of CONPLAST CWP will result in


CONPLAST CWP is a crystalline waterproofing
fast setting of the concrete, but the ultimate strength
that added to concrete to reduce water
of concrete will not be reduced provided good curing
permeability and absorption.
is maintained.

Properties Joint
Appearance : Opague/White liquid
Swell able Water stop SUPERCAST SW 10/30
or SUPERCAST PVC type are recommended
Density : approx. 1.20 to provide an integral sealing system for
at 25+/- 2oC construction joint in situ concrete.
Chloride : Nil
Content
Water : < 5 cm test method refer Packaging
permeability to ASTM C1585
Water : < 5% test method refer CONPLAST CWP is supplied in 20 litre pails
Absorption to ASTM C642 – 97 and 210 litre in drums. Special packaging on
request.
Properties are typical under laboratory
conditions and do not constitute a specification.
Fields trials are recommended.

Page 1
3
ID- NOV. 2016
CONPLAST CWP constructive solutions

Storage Precautions
CONPLAST CWP has shelf life of 12 months
provided the temperature is kept within the Health and Safety
range 20 0C to 35 0C in original packing.
This product contain corrosive material. For
detail, refer to Safety Data Sheet for handling
this product.

Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard
Conditions for the Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc
endeavours to ensure that any advice, recommendation, specification of information it may give is accurate and
correct, it cannot, because it has no direct or continuous control over where or how its products are applied, accept
any liability either directly or indirectly arising from the use of its products, whether or not in accordance with any
advice, specification, recommendation of information given by it.

telephone: fax: email:


+62 21 897 2104-06 +62 21 897 2107 Indonesia@[Link]

Page 2

You might also like