CATALOGUE

ROLLERS AND GARLAND STATIONS

FOR
BELT CONVEYORS

TRANSROLL – CZ, a.s.

Registered office Hněvkovská 1228/50, 148 00 Praha 11
Manufacturing plant Komenského 614, 691 44 Lednice

Sales department
tel.: +420 519 364 581-6
fax.: +420 519 364 562
e-mail: [email protected]
www.transroll.cz
Table of contents

INTRODUCTION..................................................................................................................................................4

ROLLERS...............................................................................................................................................................5

Technical specifications - Rollers.......................................................................................................................7

Flat rollers......................................................................................................................................................... 11
ø63 × L / 6204.......................................................................................................................................... 13
ø76 × L / 6204.......................................................................................................................................... 14
ø89 × L / 6204.......................................................................................................................................... 15
ø89 × L / 6205.......................................................................................................................................... 16
ø89 × L / 6305.......................................................................................................................................... 17
ø108 × L / 6204....................................................................................................................................... 18
ø108 × L / 6305....................................................................................................................................... 19
ø133 × L / 6204....................................................................................................................................... 20
ø133 × L / 6305....................................................................................................................................... 21
ø133 × L / 6306....................................................................................................................................... 22
ø159 × L / 6306....................................................................................................................................... 23
ø159 × L / 6308....................................................................................................................................... 24
ø194 × L / 6310....................................................................................................................................... 25
ø194 × L / 6312....................................................................................................................................... 26

Guide rollers..................................................................................................................................................... 27
øD × L / 6204............................................................................................................................................ 29
ø108 × L / 6206....................................................................................................................................... 30
ø133 × L / 6308....................................................................................................................................... 31
øD × L / M / 6204.................................................................................................................................... 32
øD × L / M / 6306.................................................................................................................................... 33

Rubber-lagged rollers..................................................................................................................................... 35
ø108/76 × L / 6204................................................................................................................................ 37
ø133/89 × L / 6204................................................................................................................................ 38

Impact rollers.................................................................................................................................................... 39
ø108/63 × L / 6204................................................................................................................................ 41
ø133/89 × L / 6204................................................................................................................................ 42
ø159/89 × L / 6306................................................................................................................................ 43
ø194/108 × L / 6308............................................................................................................................. 44
ø245/133 × L / 6310............................................................................................................................. 45

Disc rollers......................................................................................................................................................... 47
ø108/63 × L / 6204................................................................................................................................ 49
ø133/63 × L / 6204................................................................................................................................ 50
ø133/89 × L / 6204................................................................................................................................ 51
 ø159/89 × L / 6305................................................................................................................................ 52
ø159/89 × L / 6306................................................................................................................................ 53
ø194/108 × L / 6308............................................................................................................................. 54
ø194/108 × L / 6308............................................................................................................................. 55
ø245/133 × L / 6310............................................................................................................................. 56

GARLAND STATIONS.................................................................................................................................... 57

Technical specifications – Garland stations................................................................................................ 59

Top garland stations........................................................................................................................................ 61

GCH 89, 108 / 6204............................................................................................................................... 63
GLT 133 / 6306........................................................................................................................................ 64
GLZ 133 / 6306........................................................................................................................................ 65
GOHZ 133 / 6306................................................................................................................................... 66
GLT 159 / 6308........................................................................................................................................ 67
GLZ 159 / 6308........................................................................................................................................ 68
GOHZ 159 / 6308................................................................................................................................... 69
GLT 194 / 6310, 6312............................................................................................................................ 70
GLZ 194 / 6312........................................................................................................................................ 71
GLTZ 194 / 6312...................................................................................................................................... 72
GOHZ 194 / 6312................................................................................................................................... 73

Bottom garland stations.................................................................................................................................. 75

GLRD 159 / 89 / 6306........................................................................................................................... 77
GLRV 159 / 89 / 6306........................................................................................................................... 78
GORD 159 / 89 / 6306.......................................................................................................................... 79
GORV 159 / 89 / 6306.......................................................................................................................... 80
GLRD 194 / 108 / 6308......................................................................................................................... 81
GLRV 194 / 108 / 6308......................................................................................................................... 82
GORD 194 / 108 / 6308....................................................................................................................... 83
GORV 194 / 108 / 6308....................................................................................................................... 84
GLRD 245 / 133 / 6310......................................................................................................................... 85
GORD 245 / 133 / 6310....................................................................................................................... 86

Demand sheet................................................................................................................................................... 88
Introduction

Products listed in this catalogue are intended for following purposes:

• spare parts for belt conveyors already in operation
• assembly components for manufactures of complete belt conveyors

How to use this catalogue

When specifying your particular needs it is necessary to notice:
• transport belt width
• supporting structure width (type of hanging for garland stations)
• conveyor supporting structure
• working conditions (climate, dust/ powder, wetness, …)

Surface finish and ordering examples are mentioned on each catalogue sheet.

Besides our range of standard rollers we also manufacture rollers with other lengths and diameters
according to your particular requirement and assignment.

Special-design roller finish

If you don’t find your required roller in our catalogue please contact our sales department. We will
prepare an offer for special-design solution (see Demand sheet in this catalogue or www.transroll.cz).
ROLLERS
Technical specifications - Rollers

The Technical Specification below is valid for

• standard rollers used for fixed stations – top and bottom limbs of the middle conveyor section
• rollers in the conveyor belt hopper for transport belt width up to 2.000 mm.

ROLLER TYPES
• Flat rollers for:
- top belt limb
- bottom belt limb up to B=1400
• Circular disc rollers or rubber lagged rollers for belt supporting on the hopper (damping function)
• Disc rollers for bottom belt limb (self-cleaning function) for B 400–2000 mm

Supporting Roller diameter Roller length for station type Max. Belt
Belt structure Bearing speed
width B Rubber
width Flat Disc m/s
lagged
400 700 63, 76, 89 108/63 108/76 6204 500 250 160 3,15
500 800 63, 76, 89 108/63 108/76 6204 600 315 200 3,15
650 950 63, 76, 89 108/63 108/76 6204 750 380 250 3,15
800 1150 89, 108 108/63 108/76 6204 950 315 3,15
1000 1350 108, 133 133/89 133/89 6204 1150 600 380 3,15
133 133/89 6204 1400 670 465 3,15
1200 1600 133 159/89 133/89 1400 670 465 4
133 159/89 6306 1400 670 465 5
133 133/89 6204 1600 750 530 3,15
1400 1800 133 159/89 – 6305 1600 750 530 4
133 159/89 6306 1600 750 530 5
1600 2050 159 194/108 – 6308 – 900 600 5
1800 2250 159 194/108 – 6308 – 1000 670 5
2000 2600 194 245/133 – 6310 – 1150 750 5

Roller lengths in double roller stations up to B 650 are applied for top stations, from B 800 only to bottom
stations.

OPERATING CONDITIONS
• Transported material
Non-sorted bulk materials with max. grain size according to ČSN 26 3102 and bulk density up to
2,1 t/m3. Informative grain size values (lump content up to 5 % max.)

400 500 650 800 1000 1200 1400 1600 1800 2000
Max. grain size
100 150 250 300 400 500 600 675 750 800
[mm]

• Belt speed
- max. 3,15 m/s for belt width B 400 – 1400 and rollers with bearing 6204
- max. 4 m/s for belt width B 1200 – 1400 and rollers with bearings 6305
- max. 5 m/s for belt width B 1200 – 2000 and rollers with bearings 6306 – 6312
- for speed over 5 m/s please contact our sales department to offer optimum solution.
• Working conditions
Moderate climate WT in combination with chemical and mechanical contamination E41 (working
temperature -20°C to +35°C) ČSN EN 60721-3-4 (ČSN 038009)
• Storage
Rollers must be stored in covered dry place on wooden pallets placed on solid floor. Storage
temperature range is from -25 °C to +35 °C. Storage for longer than 1 year is not recommended.
• Installation and maintenance
Mounting of rollers in garlands and idlers and the installation of garlands and idlers on the conveyor
frame can be only carried out by instructed workers and designated organisations. Installed rollers
should be rotated by hand to check that they have been installed correctly. During operation it is
necessary to check that rollers are working correctly. Rollers that are not working properly (e.g.
incorrect rotation, whistling, overheating, increased axial and radial clearance, shell or rubber wear,
deformed) must be replaced.

TECHNICAL PARAMETERS
• Main dimensions
Standard rollers are in accordance with ČSN 26 1102 and ČSN ISO 1537. Specific data to sizes
øD, L, ød, s, L1, L2 are provided in Transroll catalogue sheets according to roller type (page 11–54).
• Rotating mass values
The values are mentioned in the relevant catalogue sheets.
• Roller loading
Permissible roller loading follows from operating conditions mentioned above, that is belt width, bulk
density, grain size of transported material and idler spacing.
Middle roller loading in kg for belt conveyors during full belt load, bulk density of 2,1 t/m3 and
stations spacing of 1 m:

B [mm] 400 500 650 800 1000 1200 1400 1600 1800 2000
Load [kg] 17,5 28 50 91 134 200 274 368 470 589

• Service life
The average service life of the roller (bearing durability) is 30.000 operating hours within 5 years
of the manufacturing date. This service life is also valid if all operational conditions are met and the
rollers are installed within 6 months of the production date. The service life doesn’t apply to rubber
or polyurethane discs, circular discs and lagging or to the conveying of extremely abrasive bulk
materials, e. g. fly-ash, slag.
• Rubber hardness in circular disc, disc and rubber lagged rollers is 65°Sh.
Polyurethane hardness on demand.

COMMERCIAL SPECIFICATIONS
• Order should include: name, marking, quantity, special requirements.
• Packaging
Rollers are supplied on wooden pallets 800 x 1200 mm as standard.
Different types of packaging must be agreed in advance with the sales department and must be
specified in the order.
Each pallet is marked with a label, stating the name and size, order number, marking and quantity.
• Acceptance and testing
Unless agreed in advance, acceptance and testing is not performed. If acceptance and quality
inspection are required please state this before ordering.
• Guarantee period
If all the requirements of these specifications are met, the producer provides a 24 months guarantee
from the date of rollers’ installation, however no longer than 30 months from the delivery date.
Standard solutions of labyrinth system

The system comprises of several sealing elements which prevent contaminants from entering the bearing.
Individual elements of the system are circular in shape with interlaid lips which form a labyrinth. The
shape of the lips is designed to prevent the intrusion of contaminants into bearing chamber without
increasing rotational frictional resistance.

1. For bearing types: 6204, 6205, 6206

2. For bearing types: 6308, 6305, 6306

3. For bearing types: 6310, 6312

For further information or special technical requirements, please contact our Sales dept.
Flat rollers
 FLAT ROLLER
ø63 × L / 6204 13

• steel pipe shell with the wall thickness 3 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6204 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
63×L/6204 L1 L2 Rot. parts Total
400 63×160 / 6204 3-20024-00136 168 186 1,0 1,6
500 63×200 / 6204 3-20024-00026 208 226 1,2 1,9
400 650 63×250 / 6204 3-20024-00049 258 276 1,4 2,2
500 63×315 / 6204 3-20024-00029 323 341 1,7 2,7
650 63×380 / 6204 3-20024-00030 388 406 2,0 3,1
400 63×500 / 6204 3-20024-00045 508 546 2,5 4,0
500 63×600 / 6204 3-20024-00054 608 646 2,9 4,7
650 63×750 / 6204 3-20024-00060 758 796 3,6 5,7
800 63×950 / 6204 3-20024-00047 958 996 4,5 7,1

Other lengths, shafts and coatings are available on request.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
FLAT ROLLER 63×200 / 6204, 3-20024-00026, 200 pieces

Manufacturer reserves the right to make changes without notice.

 FLAT ROLLER
14 ø76 × L / 6204

• steel pipe shell with the wall thickness 3 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6204 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
76×L/6204 L1 L2 Rot. parts Total
400 76×160 / 6204 3-20034-00163 168 186 1,2 1,8
500 76×200 / 6204 3-20034-00164 208 226 1,5 2,2
400 650 76×250 / 6204 3-20034-00165 258 276 1,7 2,5
500 76×315 / 6204 3-20034-00142 323 341 2,1 3,1
650 76×380 / 6204 3-20034-00143 388 406 2,4 3,6
76×465 / 6204 3-20034-00307 473 491 2,9 4,2
400 76×500 / 6204 3-20034-00167 508 546 3,1 4,5
500 76×600 / 6204 3-20034-00144 608 646 3,6 5,3
650 76×750 / 6204 3-20034-00145 758 796 4,4 6,5
800 76×950 / 6204 3-20034-00162 958 996 5,5 8,1
1000 79×1150 / 6204 3-20034-00261 1158 1196 6,6 9,6

Other lengths, shafts and coatings are available on request.

Surface finish
polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Flat roller 76×200 / 6204, 3-20034-00164, 200 pieces

Manufacturer reserves the right to make changes without notice.

 FLAT ROLLER
ø89 × L / 6204 15

• steel pipe shell with the wall thickness 3 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6204 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
89×L/6204 L1 L2 Rot. parts Total
400 89×160 / 6204 3-20044-00477 168 186 1,4 2,0
500 89×200 / 6204 3-20044-00227 208 226 1,7 2,4
400 650 89×250 / 6204 3-20044-00259 258 276 2,0 2,8
800 89×300 / 6204 3-20044-00255 308 326 2,3 3,2
500 800 89×315 / 6204 3-20044-00257 323 341 2,4 3,4
650 89×380 / 6204 3-20044-00262 388 406 2,8 3,9
800 89×465 / 6204 3-20044-00264 473 491 3,3 4,7
400 89×500 / 6204 3-20044-00478 508 546 3,6 5,0
500 89×600 / 6204 3-20044-00246 608 646 4,2 5,9
1200 89×670 / 6204 3-20044-00290 678 716 4,6 6,5
650 89×750 / 6204 3-20044-00275 758 796 5,1 7,2
*800 89×900 / 6204 3-20044-00226 908 946 6,1 8,6
800 89×950 / 6204 3-20044-00281 958 996 6,4 9,0
1000 89×1150 / 6204 3-20044-00266 1158 1196 7,7 10,8

Other lengths, shafts and coatings are available on request.

Surface finish
polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Flat roller 89×200 / 6204, 3-20044-00227, 200 pieces

Manufacturer reserves the right to make changes without notice.

 FLAT ROLLER
16 ø89 × L / 6205

• steel pipe shell with the wall thickness 4 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6205 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
89×L/6205 L1 L2 Rot. parts Total
650 89×250 / 6205 3-20044-01590 258 276 2,6 3,9
800 89×315 / 6205 3-20044-01565 323 341 3,1 4,7
1000 89×380 / 6205 3-20044-01566 388 406 3,7 5,5
1200 89×465 / 6205 3-20044-01418 473 491 4,4 6,6
1400 89×530 / 6205 3-20044-01564 538 556 4,9 7,4
800 89×950 / 6205 3-20044-01567 958 996 8,5 12,7
1000 89×1150 / 6205 3-20044-01568 1158 1196 10,1 15,2
1200 89×1400 / 6205 3-20044-01569 1408 1446 12,2 18,4
1400 89×1600 / 6205 3-20044-01419 1608 1646 13,9 20,9

Other lengths, shafts and coatings are available on request.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Flat roller 89×250 / 6205, 3-20044-01590, 200 pieces

Manufacturer reserves the right to make changes without notice.

 FLAT ROLLER
ø89 × L / 6305 17

• steel pipe shell with the wall thickness 4 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6305 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
89×L/6205 L1 L2 Rot. parts Total
800 89×315 / 6305 3-21174-06165 323 341 3,3 5,0
1000 89×380 / 6305 3-21174-06170 388 406 3,9 5,8
1200 89×465 / 6305 3-21174-06121 473 491 4,6 6,9
1400 89×530 / 6305 3-21174-06158 538 556 5,1 7,7
800 89×950 / 6305 3-21174-06125 958 996 8,6 13,0
1000 89×1150 / 6305 3-21174-06126 1158 1196 10,3 15,5
1200 89×1400 / 6305 3-21174-06128 1408 1446 12,4 18,7
1400 89×1600 / 6305 3-21174-06130 1608 1646 14,1 21,2

Other lengths, shafts and coatings are available on request.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Flat roller 89×380 / 6305, 3-21174-06170, 200 pieces

Manufacturer reserves the right to make changes without notice.

 FLAT ROLLER
18 ø108 × L / 6204

• steel pipe shell with the wall thickness 3 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6204 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
108×L/6204 L1 L2 Rot. parts Total
400 108×160 / 6204 3-20054-00535 168 186 1,7 2,3
500 108×200 / 6204 3-20054-00122 208 226 2,0 2,7
650 108×250 / 6204 3-20054-00123 258 276 2,4 3,2
800 108×315 / 6204 3-20054-00125 323 341 2,9 3,9
1000 108×380 / 6204 3-20054-00127 388 406 3,4 4,6
1200 108×465 / 6204 3-20054-00129 473 491 4,1 5,4
400 108×500 / 6204 3-20054-00853 508 546 4,3 5,8
500 108×600 / 6204 3-20054-00544 608 646 5,1 6,8
650 108×750 / 6204 3-20054-00380 758 796 6,3 8,4
800 108×950 / 6204 3-20054-00555 958 996 7,8 10,4
1000 108×1150 / 6204 3-20054-00146 1158 1196 9,4 12,5
1200 108×1400 / 6204 3-20054-00149 1408 1446 11,3 15,0

Other lengths, shafts and coatings are available on request.

Surface finish
polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Flat roller 108×200 / 6204, 3-20054-00122, 200 pieces

Manufacturer reserves the right to make changes without notice.

 FLAT ROLLER
ø108 × L / 6305 19

• steel pipe shell with the wall thickness 3 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6305 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
108×L/6305 L1 L2 Rot. parts Total
500 108×200 / 6305 3-20054-00302 208 226 2,5 3,7
650 108×250 / 6305 3-20054-00304 258 276 2,8 4,3
800 108×315 / 6305 3-20054-00306 323 341 3,3 5,0
1000 108×380 / 6305 3-20054-01181 388 406 3,8 5,8
1200 108×465 / 6305 3-20054-01187 473 491 4,5 6,8
1400 108×530 / 6305 3-20054-01190 538 556 5,0 7,6
500 108×600 / 6305 3-20054-00300 608 646 5,6 8,5
650 108×750 / 6305 3-20054-01191 758 796 6,7 10,3
800 108×950 / 6305 3-20054-01192 958 996 8,3 12,7
1000 108×1150 / 6305 3-20054-00297 1158 1196 9,8 15,0
1200 108×1400 / 6305 3-20054-01193 1408 1446 11,8 18,0
1400 108×1600 / 6305 3-20054-01194 1608 1646 13,3 20,4

Other lengths, shafts and coatings are available on request.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Flat roller 108×380 / 6305, 3-20054-01181, 200 pieces

Manufacturer reserves the right to make changes without notice.

 FLAT ROLLER
20 ø133 × L / 6204

• steel pipe shell with the wall thickness 3 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6204 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
133×L/6204 L1 L2 Rot. parts Total
800 133x315/6204 3-20064-00110 323 341 3,9 4,9
1000 133x380/6204 3-20064-00116 388 406 4,6 5,7
1200 133x465/6204 3-20064-00120 473 491 5,4 6,7
1400 133x530/6204 3-20064-00124 538 556 6,0 7,5
1000 133x600/6204 3-20064-00127 608 626 6,7 8,3
1200 133x670/6204 3-20064-00130 678 696 7,3 9,2
1400 133x750/6204 3-20064-00134 758 776 8,1 10,2
800 133x950/6204 3-20064-00139 958 996 10,0 12,6
1000 133x1150/6204 3-20064-00145 1158 1196 11,9 15,0
1200 133x1400/6204 3-20064-00148 1408 1446 14,3 18,0
1400 133x1600/6204 3-20064-00150 1608 1646 16,3 20,4
1600 133x1800/6204 3-20064-00754 1808 1846 18,2 22,9

Other lengths, shafts and coatings are available on request.

Surface finish
polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Flat roller 133×380 / 6204, 3-20064-00116, 200 pieces

Manufacturer reserves the right to make changes without notice.

 FLAT ROLLER
ø133 × L / 6305 21

• steel pipe shell with the wall thickness 3 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6305 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
133×L/6305 L1 L2 Rot. parts Total
800 133×315 / 6305 3-20064-00202 323 341 4,2 5,9
1000 133×380 / 6305 3-20064-00204 388 406 4,8 6,8
1200 133×465 / 6305 3-20064-00203 473 491 5,6 8,0
1400 133×530 / 6305 3-20064-00206 538 556 6,3 8,9
650 133×750 / 6305 3-20064-00209 758 776 8,4 11,9
800 133×950 / 6305 3-20064-00217 958 996 10,3 14,7
1000 133×1150 / 6305 3-20064-00232 1158 1196 12,2 17,4
1200 133×1400 / 6305 3-20064-00233 1408 1446 14,6 20,9
1400 133×1600 / 6305 3-20064-00236 1608 1646 16,5 23,6

Other lengths, shafts and coatings are available on request.

Surface finish
polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Flat roller 133×380 / 6305, 3-20064-00204, 200 pieces

Manufacturer reserves the right to make changes without notice.

 FLAT ROLLER
22 ø133 × L / 6306

• steel pipe shell with the wall thickness 4 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6306 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
133×L/6306 L1 L2 Rot. parts Total
800 133×315 / 6306 3-21064-00110 323 343 5,5 8,0
1000 133×380 / 6306 3-21064-00116 388 408 6,3 9,2
1200 133×465 / 6306 3-21064-00120 473 493 7,4 10,8
1400 133×530 / 6306 3-21064-00124 538 558 8,2 12,1
1000 133×600 / 6306 3-21064-00127 608 628 9,1 13,4
1200 133×670 / 6306 3-21064-00130 678 698 10,0 14,7
1400 133×750 / 6306 3-21064-00134 758 778 11,0 16,2
133×900 / 6306 3-21064-00138 908 948 12,9 19,1
800 133×950 / 6306 3-21064-00139 958 998 13,6 20,1
1000 133×1150 / 6306 3-21064-00145 1158 1198 16,1 23,9
1200 133×1400 / 6306 3-21064-00148 1408 1448 19,3 28,6
1400 133×1600 / 6306 3-21064-00150 1608 1648 21,8 32,4

Two-roller disposition is designed for bottom stations.

Other lengths, shafts and coatings are available on request.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Flat roller 133×380 / 6306, 3-21064-00116, 200 pieces

Manufacturer reserves the right to make changes without notice.

 FLAT ROLLER
ø159 × L / 6306 23

• steel pipe shell with the wall thickness 4 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6306 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
159×L/6306 L1 L2 Rot. parts Total
1200 159×465 / 6306 3-21074-00586 473 497 9,1 12,6
1400 159×530 / 6306 3-21074-00082 538 562 10,1 14,0
1000 159×600 / 6306 3-21074-00083 608 632 11,2 15,5
1200 159×670 / 6306 3-21074-00084 678 703 12,2 17,0
1400 159×750 / 6306 3-21074-00085 758 783 13,5 18,8
159×900 / 6306 3-21074-00099 908 932 15,8 22,0
800 159×950 / 6306 3-21074-00591 958 982 16,5 23,1
1000 159×1150 / 6306 3-21074-00092 1158 1183 19,6 27,4
1200 159×1400 / 6306 3-21074-00592 1408 1433 23,4 32,8
1400 159×1600 / 6306 3-21074-00095 1608 1633 26,4 37,1

Two-roller disposition is designed for bottom stations.

Other lengths, shafts and coatings are available on request.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Flat roller 159×530 / 6306, 3-21074-00082, 200 pieces

Manufacturer reserves the right to make changes without notice.

 FLAT ROLLER
24 ø159 × L / 6308

• steel pipe shell with the wall thickness 4 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6308 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
159×L/6308 L1 L2 Rot. parts Total
159×465 / 6308 3-21074-00120 473 498 9,7 15,6
159×530 / 6308 3-21074-00124 538 563 10,6 17,3
1600 159×600 / 6308 3-21074-00127 608 633 11,7 19,2
1800 159×670 / 6308 3-21074-00130 678 703 12,8 21,0
159×750 / 6308 3-21074-00134 758 783 14,0 23,1
1600 159×900 / 6308 3-21074-00138 908 933 16,3 27,0
159×950 / 6308 3-21074-00136 958 983 17,1 28,3
1800 159×1000 / 6308 3-21074-00141 1008 1033 17,8 29,6
159×1150 / 6308 3-21074-00145 1158 1183 20,1 33,5
1200 159×1400 / 6308 3-21074-00148 1408 1433 23,9 40,0
1400 159×1600 / 6308 3-21074-00150 1608 1633 27,0 45,3
1600 159×1800 / 6308 3-21074-00151 1808 1848 30,0 50,6

Two-roller disposition is designed for bottom stations.

Other lengths, shafts and coatings are available on request.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Flat roller 159×530 / 6308, 3-21074-00124, 200 pieces

Manufacturer reserves the right to make changes without notice.

 FLAT ROLLER
ø194 × L / 6310 25

• steel pipe shell with the wall thickness 5,6 mm

• forged steel faces welded in the shell
• ball bearings 6310 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
194×L/6310 L1 L2 Rot. parts Total
1600 194×600 / 6310 3-21084-00027 608 638 22,6 35,4
1800 194×670 / 6310 3-21084-00030 678 708 24,4 38,5
2000 194×750 / 6310 3-21084-00034 758 788 26,5 42,1
1800 194×900 / 6310 3-21084-00038 908 938 30,4 48,7
1800 194×950 / 6310 3-21084-00040 958 988 31,7 51,0
2000 194×1100 / 6310 3-21084-00043 1108 1138 35,6 57,7
2000 194×1150 / 6310 3-21084-00045 1158 1188 36,9 59,9

Other lengths, shafts and coatings are available on request.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Flat roller 194×670 / 6310, 3-21084-00030, 200 pieces

Manufacturer reserves the right to make changes without notice.

 FLAT ROLLER
26 ø194 × L / 6312

• steel pipe shell with the wall thickness 5,6 mm

• forged steel faces welded in the shell
• ball bearings 6312 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Flat roller Drawing no.
194×L/6312 L1 L2 Rot. parts Total
2000 194×750 / 6312 3-21084-00081 758 788 27,2 42,2
2000 194×1150 / 6312 3-21084-00085 1158 1188 37,6 58,0
2400 194×1350 / 6312 3-21084-00088 1358 1402 42,8 66,0

Other lengths, shafts and coatings are available on request.

Surface finish
anti-corrosive primer synthetic coating

Ordering example
Name, size, drawing number, quantity (pcs)
Flat roller 194×750 / 6312, 3-21084-00081, 200 pieces

Manufacturer reserves the right to make changes without notice.

Guide rollers
 GUIDE ROLLER
øD × L / 6204 29

• steel pipe shell with the wall thickness t

• faces of drawn steel sheet welded in the shell or welted
• ball bearings 6204 C3
• roller shaft end with a groove is designed to fit into the holder of the centering station

Name – size Dimensions [mm]

For belt width: Drawing no. Weight [kg]
Guide roller. D×L/d/6204 d1 t
400-800 89×160 / 17 / 6204 3-20344-00040 15 3 2,0
400-800 89×160 / 20 / 6204 3-20344-00015 17 3 2,0
400-800 89×200 / 17 / 6204 3-20344-00041 15 3 2,3
400-800 89×200 / 20 / 6204 3-20344-00017 17 3 2,4
800-1400 108×160 / 20 / 6204 3-20354-00081 17 3,5 2,5
800-1400 108×200 / 20 / 6204 3-20354-00082 17 3,5 3,0

Other lengths, shafts and coatings are available on request.

Guide rollers are designed to fit into standard centering stations.

Surface finish
polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Guide roller 89×200 / 20 / 6204, 3-20344-00041, 50 pieces

Manufacturer reserves the right to make changes without notice.

 GUIDE ROLLER
30 ø108 × L / 6206

• steel pipe shell with the wall thickness 4 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6206 and 6204 C3
• smooth roller shaft end is designed to fit into the holder of centering station

Name – size
Guide roller. Drawing no. Weight [kg]
108×L/6204/6206
108×160 / 6204 / 6206 3-21454-00004 3,7
108×200 / 6204 / 6206 3-21454-00006 4,4

Other lengths, shafts and coatings are available on request.

Guide rollers are designed to fit into standard centering stations.

Surface finish – possible solutions:

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Guide roller 108×200 / 6206, 3-21454-00006, 50 pieces

Manufacturer reserves the right to make changes without notice.

 GUIDE ROLLER
ø133 × L / 6308 31

• steel pipe shell with the wall thickness 6,3 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6308 and 6305 C3
• smooth roller shaft end is designed to fit into the holder of centering station

Name – size
Drawing no. Weight [kg]
Guide roller. 133×L/6308
133x200/6305/6308 3-21464-00006 8,4
133x250/6305/6308 3-21464-00008 9,9

Other lengths, shafts and coatings are available on request.

Guide rollers are designed to fit into standard centering stations.

Surface finish – possible solutions:

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Guide roller 133×200 / 6308, 3-21464-00006, 50 pieces

Manufacturer reserves the right to make changes without notice.

 GUIDE ROLLER
32 øD × L / M / 6204

• steel pipe shell with the wall thickness t

• faces of drawn steel sheet welded in the shell or welted
• ball bearings 6204 C3
• roller shaft end with external thread „M“

Name – size Dimensions [mm]

Drawing no. Weight [kg]
Guide roller. 108×L/d/6204 L1 t
63×100 / M16 3-20324-00007 47 3 1,2
63×125 / M16 3-20324-00008 52 3 1,3
63×150 / M16 3-20324-00006 47 3 1,5
63×160 / M16 3-20324-00014 47 3 1,6
63×200 / M16 3-20324-00011 47 3 1,8
76×100 / M16 3-20334-00048 50 3 1,3
89×100 / M16 3-20344-00009 47 3 1,4
89×150 / M16 3-20344-00010 47 3 1,9
89×160 / M16 3-20344-00011 62 3 2,0
89×200 / M16 3-20344-00014 62 3 2,3
108×160 / M16 3-20354-00075 62 3 2,3
108×160 / M20 3-20354-00071 102 3,5 2,4
108×200 / M20 3-20354-00070 102 3,5 2,8

Other lengths, shafts and coatings are available on request.

Guide rollers are designed to guard the right position of the belt or to ensure the right posi-
tion of the objects transported on rollways.

Surface finish
polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Guide roller 89×160 / M16 / 6204, 3-20344-00011, 50 pieces

Manufacturer reserves the right to make changes without notice.

 GUIDE ROLLER
øD × L / M / 6306 33

• steel pipe shell with the wall thickness 4,5 mm

• faces of drawn steel sheet welded in the shell
• ball bearings 6306 and 6204 C3
• roller shaft end with external thread „M“

Name – size Dimensions [mm]

Guide roller. D×L/6204/6306
Drawing no. Weight [kg]
L1 L2
133x130 / M24 3-21364-00061 15 65 4,1
133x250 / M24 3-21364-00069 10 70 6,7

Other lengths, shafts and coatings are available on request.

Guide rollers are designed to guard the right position of the belt or to ensure the right
position of the objects transported on rollways.

Surface finish – possible solutions:

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, drawing number, quantity (pcs)
Guide roller 133×250 / M24 / 6306, 3-21364-00069, 50 pieces

Manufacturer reserves the right to make changes without notice.

Rubber-lagged
rollers
 RUBBER-LAGGED ROLLER
ø108/76 × L / 6204 37

• steel pipe shell with the wall thickness 5 mm rubbered to ø108 with a hardness of 65 Sh
• faces of drawn steel sheet welded in the shell
• ball bearings 6204 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Rubber-la-
gged roller
Drawing no.
L1 L2 Rot. parts Total
108/76×L/6204
400 108/76×160 / 6204 3-20254-00051 168 186 2,6 3,2
500 108/76×200 / 6204 3-20254-00052 208 226 3,2 3,9
400 650 108/76×250 / 6204 3-20254-00061 258 276 4,0 4,8
500 800 108/76×315 / 6204 3-20254-00062 323 341 5,0 6,0
650 1000 108/76×380 / 6204 3-20254-00063 388 406 6,0 7,1
1200 108/76×465 / 6204 3-20254-00055 473 491 7,3 8,6
400 108/76×500 / 6204 3-20254-00066 508 546 7,8 9,3
500 108/76×600 / 6204 3-20254-00067 608 646 9,3 11,0
650 108/76×750 / 6204 3-20254-00065 758 796 11,6 13,7
800 108/76×950 / 6204 3-20254-00070 958 996 14,6 17,2
1000 108/76×1150 / 6204 3-20254-00197 1158 1196 17,7 20,8

Other lengths, shafts and coatings are available on request.

Surface finish
anti-corrosive primer synthetic coating

Ordering example
Name, size, drawing number, quantity (pcs)
Rubber-lagged roller 108/76×200 / 6204, 3-20254-00052, 50 pieces

Manufacturer reserves the right to make changes without notice.

 RUBBER-LAGGED ROLLER
38 ø133/89 × L / 6204

• steel pipe shell with the wall thickness 5 mm rubbered to ø133 with a hardness of 65 Sh
• faces of drawn steel sheet welded in the shell
• ball bearings 6204 C3

For garland type and belt width Name – size: Dimensions [mm] Weight [kg]
Rubber-lagged roller Drawing no.
108/76×L/6204 L1 L2 Rot. parts Total

133/89×250 / 6204 3-20264-00008 258 276 5,4 6,2

133/89×315 / 6204 3-20264-00010 323 341 6,7 7,7
1000 133/89×380 / 6204 3-20264-00016 388 406 8,1 9,2
1200 133/89×465 / 6204 3-20264-00020 473 491 9,9 11,2
1400 133/89×530 / 6204 3-20264-00024 538 556 11,3 12,8
133/89×600 / 6204 3-20264-00027 608 626 12,7 14,4
1000 133/89×1150 / 6204 3-20264-00045 1158 1196 24,3 27,4
1200 133/89×1400 / 6204 3-20264-00048 1408 1446 29,6 33,3
1400 133/89×1600 / 6204 3-20264-00050 1608 1646 33,8 38,0

Other lengths, shafts and coatings are available on request.

Surface finish
anti-corrosive primer synthetic coating

Ordering example
Name, size, drawing number, quantity (pcs)
Rubber-lagged roller 133/89×380 / 6204, 3-20264-00016, 50 pieces

Manufacturer reserves the right to make changes without notice.

Impact rollers
 IMPACT ROLLER
ø108/63 × L / 6204 41

• steel pipe shell with the wall thickness 3mm

• rubber rings ø108 and hardness 65 Sh are pressed and secured on the steel pipe shell
• faces of drawn steel sheet welded in the shell
• ball bearings 6204 C3

For belt width Name – size: Dimensions [mm]

Number of Total weight
Impact roller
L1 L2 rubber rings [kg]
108/76×L/6204
650 108/63×250 / 6204 258 276 8 3,7
800 108/63×315 / 6204 323 341 10 4,5
1000 108/63×380 / 6204 388 406 13 5,5
1200 108/63×465 / 6204 473 491 15 6,4
108/63×600 / 6204 608 646 19 8,1

Other lengths, shafts and coating are available on request.

Surface finish
anti-corrosive primer synthetic coating

Ordering example
Name, size, quantity (pcs)
Impact roller, 108/63×250 / 6204 , 50 pieces

Manufacturer reserves the right to make changes without notice.

 IMPACT ROLLER
42 ø133/89 × L / 6204

• steel pipe shell with the wall thickness 3 mm

• rubber rings ø133 and hardness 65 Sh are pressed and secured on the steel pipe shell
• faces of drawn steel sheet welded in the shell
• ball bearings 6204 C3

For belt width Name – size: Dimensions [mm]

Number of Total weight
Impact roller
L1 L2 rubber rings [kg]
108/76×L/6204
133/89×250 / 6204 258 276 6 4,9
133/89×315 / 6204 323 341 8 6,1
1000 133/89×380 / 6204 388 406 10 7,3
1200 133/89×465 / 6204 473 491 13 9,0
1400 133/89×530 / 6204 538 556 15 10,9

Other lengths, shafts and coating are available on request.

Surface finish
anti-corrosive primer synthetic coating

Ordering example
Name, size, quantity (pcs)
Impact roller, 133/89×380 / 6204, 50 pieces

Manufacturer reserves the right to make changes without notice.

 IMPACT ROLLER
ø159/89 × L / 6306 43

• steel pipe shell with the wall thickness 5 mm

• rubber rings ø159 and hardness 65 Sh are pressed and secured on the steel pipe shell
• steel tube faces machined and welded in the shell
• ball bearings 6306 C3

For belt width Name – size: Dimensions [mm]

Number of Total weight
Impact roller
L1 L2 rubber rings [kg]
159/89×L/6306
800 159/89x315/6306 323 343 7 11,2
1000 159/89x380/6306 388 408 8 12,9
1200 159/89x465/6306 473 493 10 15,5
1400 159/89x530/6306 538 558 12 17,7

Other lengths, shafts and coating are available on request.

Surface finish
anti-corrosive primer synthetic coating

Ordering example
Name, size, quantity (pcs)
Impact roller, 159/89×380 / 6306, 50 pieces

Manufacturer reserves the right to make changes without notice.

 IMPACT ROLLER
44 ø194/108 × L / 6308

• steel pipe shell with the wall thickness 5 mm

• rubber rings ø194 and hardness 65 Sh are pressed and secured on the steel pipe shell
• steel tube faces machined and welded in the shell
• ball bearings 6308 C3

For belt width Name – size: Dimensions [mm]

Number of Total weight
Impact roller
L1 L2 rubber rings [kg]
194/108×L/6308
1600 194/108×600 / 6308 608 633 11 27,2
1800 194/108×670 / 6308 678 703 13 30,6

Other lengths, shafts and coating are available on request.

Surface finish
anti-corrosive primer synthetic coating

Ordering example
Name, size, quantity (pcs)
Impact roller, 194/108×600 / 6308, 50 pieces

Manufacturer reserves the right to make changes without notice.

 IMPACT ROLLER
ø245/133 × L / 6310 45

• steel pipe shell with the wall thickness 6,3 mm

• rubber rings ø245 and hardness 65 Sh are pressed and secured on the steel pipe shell
• steel tube faces machined and welded in the shell
• ball bearings 6310 C3

For belt width Name – size: Dimensions [mm]

Number of Total weight
Impact roller
L1 L2 rubber rings [kg]
245/133×L/6310
1600 245/133×600 / 6310 608 638 13 49,2
1800 245/133×670 / 6310 678 708 14 53,5
2000 245/133×750 / 6310 758 788 16 59,9

Other lengths, shafts and coating are available on request.

Surface finish
anti-corrosive primer synthetic coating

Ordering example
Name, size, quantity (pcs)
Impact roller, 245/133×750 / 6310, 50 pieces

Manufacturer reserves the right to make changes without notice.

Disc rollers
 DISC ROLLER
ø108/63 × L / 6204 49

• steel pipe shell with the wall thickness 3mm

• rubber discs ø108 and hardness 65 Sh are pressed on the steel pipe shell
• faces of drawn steel sheet welded in the shell
• ball bearings 6204 C3

For belt width Name – size: Dimensions [mm] Number Weight [kg]
Disc roller of rubber
108/63×L/6204 L1 L2 discs Rot. parts Total
400 108/63×500 / 6204 508 546 4+2+4 4,1 5,6
500 108/63×600 / 6204 608 646 5+2+5 4,9 6,6
650 108/63×750 / 6204 758 796 5+3+5 5,7 7,8
800 108/63×950 / 6204 958 996 5+5+5 6,9 9,5
1000 108/63×1150 / 6204 1158 1196 5+6+5 8,0 11,1
1200 108/63×1400 / 6204 1408 1446 6+7+6 9,6 13,3

Other lengths, shafts and coating are available on request.

Surface finish
polyester powder coating

Ordering example
Name, size, quantity (pcs)
Disc roller, 108/63×500 / 6204 , 100 pieces

Manufacturer reserves the right to make changes without notice.

 DISC ROLLER
50 ø133/63 × L / 6204

• steel pipe shell with the wall thickness 3mm

• rubber discs ø133 and hardness 65 Sh are pressed on the steel pipe shell
• faces of drawn steel sheet welded in the shell
• ball bearings 6204 C3

For belt width Name – size: Dimensions [mm] Number Weight [kg]
Disc roller of rubber
133/63×L/6204 L1 L2 discs Rot. parts Total
800 133/63×465 / 6204 473 491 8 3,8 5,2
500 133/63×600 / 6204 608 646 12 5,1 6,9
1000 133/63×600 / 6204 608 626 12 5,1 6,8
1200 133/63×670 / 6204 678 696 10 5,1 6,9
1400 133/63×750 / 6204 758 778 15 6,3 8,4
650 133/63×750 / 6204 758 796 15 6,3 8,4
800 133/63×950 / 6204 958 996 14 7,0 9,6
1000 133/63×1150 / 6204 1158 1196 17 8,5 11,6
1200 133/63×1400 / 6204 1408 1446 19 9,9 13,7
1400 133/63×1600 / 6204 1608 1646 21 11,2 15,4

Other lengths, shafts and coating are available on request.

Surface finish
polyester powder coating

Ordering example
Name, size, quantity (pcs)
Disc roller, 133/63×465 / 6204 , 100 pieces

Manufacturer reserves the right to make changes without notice.

 DISC ROLLER
ø133/89 × L / 6204 51

• steel pipe shell with the wall thickness 3mm

• rubber discs ø133 and hardness 65 Sh are pressed on the steel pipe shell
• faces of drawn steel sheet welded in the shell
• ball bearings 6204 C3

For belt width Name – size: Dimensions [mm] Number Weight [kg]
Disc roller of rubber
133/89×L/6204 L1 L2 discs Rot. parts Total
133/89×500 / 6204 508 526 3+3+3 5,8 7,2
1000 133/89×600 / 6204 608 626 4+3+4 6,9 8,6
1200 133/89×670 / 6204 678 696 4+3+4 7,4 9,2
1400 133/89×750 / 6204 758 776 4+4+4 8,1 10,2
650 133/89×750 / 6204 758 796 4+4+4 8,1 10,2
800 133/89×950 / 6204 958 996 4+6+4 9,9 12,5
1000 133/89×1150 / 6204 1158 1196 5+7+5 11,9 15,0
1200 133/89×1400 / 6204 1408 1446 5+10+5 14,3 18,0
1400 133/89×1600 / 6204 1608 1646 5+12+5 16,0 20,2

Other lengths, shafts and coating are available on request.

Surface finish
polyester powder coating

Ordering example
Name, size, quantity (pcs)
Disc roller, 133/89×670 / 6204, 100 pieces

Manufacturer reserves the right to make changes without notice.

 DISC ROLLER
52 ø159/89 × L / 6305

• steel pipe shell with the wall thickness 4mm

• rubber discs ø159 and hardness 65 Sh are pressed on the steel pipe shell
• faces of drawn steel sheet welded in the shell
• ball bearings 6305 C3

For belt width Name – size: Dimensions [mm] Number Weight [kg]
Disc roller of rubber
159/89×L/630 L1 L2 discs Rot. parts Total
800 159/89×465 / 6305 473 491 9 7,3 9,6
1000 159/89×600 / 6305 608 626 12 9,3 12,2
1200 159/89×670 / 6305 678 696 13 10,2 13,4
1400 159/89×750 / 6305 758 776 15 11,5 15,0
800 159/89×950 / 6305 958 996 15 13,1 17,5
1000 159/89×1150 / 6305 1158 1196 7+3+7 15,4 20,6
1200 159/89×1400 / 6305 1408 1446 7+5+7 18,1 24,4
1400 159/89×1600 / 6305 1608 1646 7+7+7 20,4 27,5

Other lengths, shafts and coating are available on request.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, quantity (pcs)
Disc roller, 159/89×670 / 6305, 100 pieces

Manufacturer reserves the right to make changes without notice.

 DISC ROLLER
ø159/89 × L / 6306 53

• steel pipe shell with the wall thickness 4mm

• rubber discs ø159 and hardness 65 Sh are pressed on the steel pipe shell
• steel tube faces machined and welded in the shell
• ball bearings 6306 C3

For belt width Name – size: Dimensions [mm] Number Weight [kg]
Disc roller of rubber
159/89×L/6306 L1 L2 discs Rot. parts Total
800 159/89×465 / 6306 473 493 9 8,2 11,6
1000 159/89×600 / 6306 608 628 12 10,2 14,5
1200 159/89×670 / 6306 678 698 13 11,1 15,8
1400 159/89×750 / 6306 758 778 15 12,4 17,6
800 159/89×950 / 6306 958 998 15 14,0 20,6
1000 159/89×1150 / 6306 1158 1198 7+3+7 16,3 24,1
1200 159/89×1400 / 6306 1408 1448 7+5+7 19,0 28,4
1400 159/89×1600 / 6306 1608 1648 7+7+7 21,3 31,9

Other lengths, shafts and coating are available on request.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, quantity (pcs)
Disc roller, 159/89×670 / 6306, 100 pieces

Manufacturer reserves the right to make changes without notice.

 DISC ROLLER
54 ø194/108 × L / 6308

• steel pipe shell with the wall thickness 5mm

• rubber discs ø194 and hardness 65 Sh are pressed on the steel pipe shell
• steel tube faces machined and welded in the shell
• ball bearings 6308 C3

For belt width Name – size: Dimensions [mm] Number Weight [kg]
Disc roller of rubber Rot.
194/108×L/6308 L1 L2 discs Total
parts
1600 194/108×900 / 6308 908 933 13 20,8 31,5
1800 194/108×1000 / 6308 1008 1033 15 23,2 35,0
2000 194/108×1150 / 6308 1158 1183 18 26,7 40,1

Other lengths, shafts and coating are available on request.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, quantity (pcs)
Disc roller, 194/108×900 / 6308 , 100 pieces

Manufacturer reserves the right to make changes without notice.

 CORRUGATED ROLLER
ø194/108 × L / 6308 55

• steel pipe shell with the wall thickness 5mm

• rubber discs ø194 and hardness 65 Sh are pressed on the steel pipe shell
• steel tube faces machined and welded in the shell
• ball bearings 6308 C3

For belt width Name – size: Dimensions [mm] Number Weight [kg]
Corrugated roller of rubber Rot.
194/108×L/6308 L1 L2 discs Total
parts
1600 194/108×900 / 6308 908 933 18 32,5 43,2
1800 194/108×1000 / 6308 1008 1033 20 35,9 47,7

Other lengths, shafts and coating are available on request.

Surface finish
anti-corrosive primer synthetic coating

Ordering example
Name, size, quantity (pcs)
Corrugated roller, 194/108×900 / 6308 , 100 pieces

Manufacturer reserves the right to make changes without notice.

 DISC ROLLER
56 ø245/133 × L / 6310

• steel pipe shell with the wall thickness 6,3 mm

• rubber discs ø245 and hardness 65 Sh are pressed on the steel pipe shell
• steel tube faces machined and welded in the shell
• ball bearings 6310 C3

For belt width Name – size: Dimensions [mm] Number Weight [kg]
Disc roller of rubber Rot.
1245/133×L/6310 L1 L2 discs Total
parts
2000 245/133×1150 / 6310 1158 1188 18 46,0 68,9

Other lengths, shafts and coating are available on request.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating

Ordering example
Name, size, quantity (pcs)
Disc roller, 245/133×1150/6310, 100 pieces

Manufacturer reserves the right to make changes without notice.

GARLAND
STATIONS
 59
Technical specifications – Garland stations

Design description

Specific description of the rollers is included in catalogue sheets of garland stations.

The rollers in garland stations are connected by means of:
• chain couplers in Gcx garland stations
• pins with slats in Glx garland stations
• loop and hook in GOHx top garland stations
• loop and „C“ suspensions in GORx garland stations

The connections enable spring loading of rollers in higher loading and so quieter conveyor motion and
belt protection against puncture. The ends of roller axes are modified for attaching connection roller
components and suspension onto supporting structure. Suspension is made by means of snap hooks in top
garland stations or chains in bottom garland stations.
More detailed illustrations and dimensions are provided in the catalogue sheets according to types.

OPERATING CONDITIONS

• Transported material
Loose unsorted material with grain size according to ČSN 260070 (ISO 3435) and bulk density up
to 2,1 t/m3. Informative grain size values (lump content up to 5 %)

B [mm] 1200 1200 1600 1800 2000 2250

Max. Grain size [mm] 500 500 50 750 800 800

• Conveying speed
- max. 5 m/s for belt width B 1200 – 1400 and rollers with bearings 6306
- max. 6,3 m/s for belt width B 1600 – 2250 and rollers with bearings 6308 – 6312
• Working conditions
Moderate climate WT in combination with chemical and mechanical contamination E41 ČSN EN
60721-3-4 (ČSN 038009). Working temperature range from -20°C to +35°C.
• Storage
Garland stations must be stored on a pallets in an enclose storehouse on stabilised solid ground. Storage
temperatures range from -25°C to +35°C. Storage for longer than 6 months is not recommended.
• Installation and maintenance
Mounting of rollers in garland stations and subsequently completed garland stations on the conveyor
frame can be only carried out by skilled workers and designated organisations. Installed rollers
should be rotated by hand to check that they have been installed correctly. During operation it is
necessary to check that rollers are working correctly. Rollers that are not working properly (e.g.
incorrect rotation, whistling, overheating, increased axial and radial clearance, shell or rubber wear,
deformed) must be replaced.
60
TECHNICAL DATA

• Main dimensions
Standard roller dimensions in complete garland stations are included in the relevant catalogue sheets.
• Roller loading
Permissible roller loading follows from the load of completely filled top belt profile with loose material
in the bulk density = 2,1 t/m3 and garland stations spacing of 1,2–1,5 m (ČSN ISO 5048)

B [mm] 1200 1400 1600 1800 2000 2250

Max. grain size [mm] 270 370 497 635 795 918
The loading applies for garland stations spacing of 1,5 m

• Service life
The average service life of roller (bearing durability) is 30.000 working hours within 5 years of the
production date. This service life is also valid if all operational conditions are met and the rollers
are installed within 6 months of the production date. The service life doesn’t apply to rubber or
polyurethane discs and the conveying of extremely abrasive bulk materials, e. g. fly-ash, and slag.
• Hardness
Rubber hardness in disc rollers is 65°Sh as standard.
Polyurethane hardness on demand..

COMMERCIAL SPECIFICATIONS

• Order should include: name, size, quantity, special requirements( balancing, surface finish etc.)
• Packaging
Garland stations are supplied in pre-assembled conditions as single rollers on wooden pallets
800 x 1200 mm.
Different types of packaging must be agreed in advance with the sales department and must be
specified in the order.
Each pallet is marked with a label, stating the name and size, order number, marking and quantity.
• Acceptance and testing
Unless agreed in advance, acceptance and testing is not performed. If acceptance and quality
inspection are required please state this before ordering.
• Guarantee period
If all the requirements of these specifications are met, the producer provides a 24 months guarantee
from the date of installation, however no longer than 30 months from the delivery date.

Manufacturer reserves the right to make changes without notice.

Top garland
stations
 TOP GARLAND STATION
GCH 89, 108 / 6204 63

• station consists of three flat garland rollers with bearing 6204 (page 15, 18)
• rollers are connected by flat chain connectors
• station is suspended by hooks

Dimensions [mm]
Belt width Drawing no. Weight [kg]
D L L1
800 3-22444-13601 89 315 343 10,9
800 3-22454-13602 108 315 343 17,3
1000 3-22454-14603 108 380 412 15,2

Garland stations are delivered on wooden pallets 1200x800 mm.

Surface finish
polyester powder coating

1450
1400
B=1
1350 000
1300
A0 [mm]

1250
1200
1150
B=8
1100 00
1050
1000
20 25 30 35 40 45
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Garland station GCH B800, 3-22444-13601, 100 pieces

Manufacturer reserves the right to make changes without notice.

 TOP GARLAND STATION
64 GLT 133 / 6306

• station consists of three flat garland rollers ø133 with bearing 6306 (page 22)
• rollers are connected by slats and pins
• station is suspended by forged shackles

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1
1000 3-22464-14614 380 420 35,1
1200 3-22464-15614 465 505 38,2
1400 3-22464-16614 530 570 40,8

Garland stations are delivered on wooden pallets 1200x800 mm.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating
1800
1700 B=14
00
1600
A0 [mm]

1500
B=12
1400 00
1300 B=1000
1200
1100
20 25 30 35 40 45
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Garland station GLT B1200, 3-22464-15614, 100 pieces

Manufacturer reserves the right to make changes without notice.

 TOP GARLAND STATION
GLZ 133 / 6306 65

• station consists of three flat garland rollers ø133 with bearing 6306 (page 22)
• rollers are connected by slats and pins
• station is suspended by snap hooks

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1
1200 3-22464-15613 465 505 36,6
1400 3-22464-16613 530 570 44,5

Garland stations are delivered on wooden pallets 1200x800 mm.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating
2050

1950
B=1
400
1850
A0 [mm]

1750

1650 B=1
200
1550

1450
20 25 30 35 40 45
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Garland station GLZ B1200, 3-22464-15613, 100 pieces

Manufacturer reserves the right to make changes without notice.

 TOP GARLAND STATION
66 GOHZ 133 / 6306

• station consists of three flat garland rollers ø133 with bearing 6306 (page 22)
• rollers are connected by forged loops and hooks which are parts of the rollers
• station is suspended by snap hooks

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1 L2
1200 3-22064-15611 465 465 567 38,0
1400 3-22064-16611 530 530 632 42,0

Garland stations are delivered on wooden pallets 1200x800 mm.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating
2000
B=1
1900 400
A0 [mm]

1800

1700 B=1
200
1600

1500
20 25 30 35 40 45
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Garland station GOHZ B1200, 3-22064-15611, 100 pieces

Manufacturer reserves the right to make changes without notice.

 TOP GARLAND STATION
GLZ 159 / 6308 67

• station consists of three flat garland rollers ø159 with bearing 6308 (page 24)
• rollers are connected by slats and pins
• station is suspended by forged shackles

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1 LB LB1
1400 3-22474-16601 465 515 530 580 65,0
1600 3-22474-17614 600 650 600 650 74,0
1800 3-22474-18614 670 720 670 720 79,7

Garland stations are delivered on wooden pallets 1200x800 mm.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating
2250
2150 B=18
00
2050
1950
A0 [mm]

1850 B=16
00
1750
1650 B=140
0
1550
1450
20 25 30 35 40 45
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Garland station GLZ B1600, 3-22474-17614, 100 pieces

Manufacturer reserves the right to make changes without notice.

 TOP GARLAND STATION
68 GLZ 159 / 6308

• station consists of three flat garland rollers ø159 with bearing 6308 (page 24)
• rollers are connected by slats and pins
• station is suspended by snap hooks

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1 LB LB1
1600 3-22474-17613 600 650 600 650 76,6
1800 3-22474-18608 465 515 750 800 81,0
1800 3-22474-18623 670 720 670 720 82,3

Garland stations are delivered on wooden pallets 1200x800 mm.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating
2550
2450
2350 180
180 0
2250 0
A0 [mm]

2150 160
0
2050
1950
1850
20 25 30 35 40 45
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Garland station GLZ B1600, 3-22474-17613,100 pieces

Manufacturer reserves the right to make changes without notice.

 TOP GARLAND STATION
GOHZ 159 / 6308 69

• station consists of three flat garland rollers ø159 with bearing 6308 (page 24)
• rollers are connected by forged loops and hooks which are parts of the rollers
• station is suspended by snap hooks

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1 LB LB1
1600 3-22074-17611 600 754 600 730 77,0
1800 3-22074-18606 465 619 750 880 81,6
1800 3-22074-18611 670 824 670 800 83,0

Garland stations are delivered on wooden pallets 1200x800 mm.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating
2500
2400 180
180 0
2300 0
A0 [mm]

2200
160
2100 0
2000
1900
20 25 30 35 40 45
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Garland station GOHZ B1600, 3-22074-17611, 100 pieces

Manufacturer reserves the right to make changes without notice.

 TOP GARLAND STATION
70 GLT 194 / 6310, 6312

• station consists of three flat garland rollers ø194 with bearing 6310 (page 23), or 6312 (page 26)
• rollers are connected by slats and pins
• station is suspended by forged shackles

Dimensions [mm]
Belt width Drawing no. Bearing Weight [kg]
L L1 LB LB1
2000 1-22484-19603 6310 530 590 850 910 141
2000 1-22484-19614 6312 530 590 850 910 145

Garland stations are delivered on wooden pallets 1200x800 mm.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating 2600

2500

2400
A0 [mm]

2300

2200

2100

2000
20 25 30 35 40 45
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Garland station GLT B2000, 1-22484-19603, 100 pieces

Manufacturer reserves the right to make changes without notice.

 TOP GARLAND STATION
GLZ 194 / 6312 71

• station consists of three flat garland rollers ø194 with bearing 6312 (page 26)
• rollers are connected by slats and pins
• station is suspended by snap hooks

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1 LB LB1
2000 1-22484-19613 530 590 850 910 151
2200 3-22484-10713 530 590 950 1010 160

Garland stations are delivered on wooden pallets 1200x800 mm.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating 3100
3000
2900 B=2
2800 200
A0 [mm]

2700
2600 B=2
2500 000
2400
2300
2200
20 25 30 35 40 45
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Garland station GLZ B2000, 1-22484-19613, 100 pieces

Manufacturer reserves the right to make changes without notice.

 TOP GARLAND STATION
72 GLTZ 194 / 6312

• station consists of three flat garland rollers ø194 with bearing 6312 (page 26)
• rollers are connected by slats and pins
• station is suspended by snap hooks

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1 LB LB1
2000 1-22484-19612 530 590 850 910 153
2200 3-22484-10712 530 590 950 1010 162

Garland stations are delivered on wooden pallets 1200x800 mm.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating
3100
3000
2900 B=
2800
220
0
A0 [mm]

2700
2600 B=2
2500 000
2400
2300
2200
20 25 30 35 40 45
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Garland station GLTZ B2000, 1-22484-19612, 100 pieces

Manufacturer reserves the right to make changes without notice.

 TOP GARLAND STATION
GOHZ 194 / 6312 73

• station consists of three flat garland rollers ø194 with bearing 6312 (page 26)
• rollers are connected by forged loops and hooks which are parts of the rollers
• station is suspended by snap hooks

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1 LB LB1
2000 1-22084-19611 530 722 850 1010 150

Garland stations are delivered on wooden pallets 1200x800 mm.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating
3000
2900
2800
A0 [mm]

2700
2600
2500
2400
2300
20 25 30 35 40 45
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Garland station GOHZ B2000, 1-22084-19611, 100 pieces

Manufacturer reserves the right to make changes without notice.

Bottom garland
stations
 BOTTOM GARLAND STATION
GLRD 159 / 89 / 6306 77

• station consists of two disc garland rollers ø159/89 with bearing 6306 (page 53)
• rollers are connected by slats and pins
• station is suspended by chains

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1
1200 3-22574-15611 670 726 37,3
1400 3-22574-16609 750 806 40,7

Garland station is delivered unassembled as single rollers including suspending chains and slats on wo-
oden pallets 1200x800 mm. Connection accessories (pins, cotter pins, nuts, washers) are delivered si-
multaneously in a separate box.
Assembly of the garland is done on site.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating 2000

B=1
1900 400
A0 [mm]

1800

1700 B=12
00

1600
10 12 14 16 18 20 22 24
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Bottom garland station GLRD B1200, 3-22574-15611, 50 pieces

Manufacturer reserves the right to make changes without notice.

 BOTTOM GARLAND STATION CORRUGATED
78 GLRV 159 / 89 / 6306

• station consists of two corrugated garland rollers ø159/89 with bearing 6306
• rollers are connected by slats and pins
• station is suspended by chains

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1
1200 3-22574-15610 670 726 52,1
1400 3-22574-16610 750 806 57,1

Garland station is delivered unassembled as single rollers including suspending chains and slats on wo-
oden pallets 1200x800 mm. Connection accessories (pins, cotter pins, nuts, washers) are delivered si-
multaneously in a separate box.
Assembly of the garland is done on site.

Surface finish
anti-corrosive primer synthetic coating

2000

B=1
1900 400
A0 [mm]

1800

B=12
1700 00

1600
10 12 14 16 18 20 22 24
α [°]
Ordering example
Name, size, drawing number, quantity (pcs)
Bottom garland station GLRV B1200, 3-22574-15610, 50 pieces

Manufacturer reserves the right to make changes without notice.

 BOTTOM GARLAND STATION
GORD 159 / 89 / 6306 79

• station consists of two disc garland rollers ø159/89 with bearing 6306 (page 53)
• rollers are connected by loops and „C“ suspensions
• station is suspended by chains

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1
1200 3-22374-15611 670 792 41,2
1400 3-22374-16611 750 872 48,6

Garland station is delivered unassembled as single rollers including suspending chains on wooden pal-
lets 1200x800 mm. Connection accessories („C“ suspensions) are delivered simultaneously in a separa-
te box.
Assembly of the garland is done on site.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating 2000
B=14
1900 00
A0 [mm]

1800

B=12
1700 00

1600
10 12 14 16 18 20 22 24
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Bottom garland station GORD B1200, 3-22374-15611, 50 pieces

Manufacturer reserves the right to make changes without notice.

 BOTTOM GARLAND STATION CORRUGATED
80 GORV 159 / 89 / 6306

• station consists of two corrugated garland rollers ø159/89 with bearing 6306
• rollers are connected by loops and „C“ suspensions
• station is suspended by chains

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1
1200 3-22374-15610 670 792 54,4
1400 3-22374-16610 750 872 58,6

Garland station is delivered unassembled as single rollers including suspending chains on wooden pal-
lets 1200x800 mm. Connection accessories („C“ suspensions) are delivered simultaneously in a separa-
te box.
Assembly of the garland is done on site.

Surface finish
anti-corrosive primer synthetic coating

2000
B=14
1900 00
A0 [mm]

1800

B=12
1700 00

1600
10 12 14 16 18 20 22 24
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Bottom garland station GORV B1200, 3-22374-15610, 50 pieces

Manufacturer reserves the right to make changes without notice.

 BOTTOM GARLAND STATION
GLRD 194 / 108 / 6308 81

• station consists of two disc garland rollers ø194/108 with bearing 6308 (page 54)
• rollers are connected by slats and pins
• station is suspended by chains

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1
1600 3-22584-17609 900 980 77,6
1800 1-22584-18609 1000 1080 90,2
2200 3-22584-10716 1150 1230 100,4

Garland station is delivered unassembled as single rollers including suspending chains and slats on wo-
oden pallets 1200x800 mm. Connection accessories (pins, cotter pins, nuts, washers) are delivered si-
multaneously in a separate box.
Assembly of the garland is done on site.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
2900
3) polyester powder coating 2800
B=220
2700 0
2600 B=1800
A0 [mm]

2500
2400
2300
2200 B=1600
2100
2000
10 12 14 16 18 20 22 24
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Bottom garland station GLRD B1600, 3-22584-17609, 50 pieces

Manufacturer reserves the right to make changes without notice.

 BOTTOM GARLAND STATION CORRUGATED
82 GLRV 194 / 108 / 6308

• station consists of two corrugated garland rollers ø194/108 with bearing 6308 (page 54)
• rollers are connected by slats and pins
• station is suspended by chains

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1
1600 3-22584-17613 900 980 104,6
1800 1-22584-18610 1000 1080 114,8

Garland station is delivered unassembled as single rollers including suspending chains and slats on wo-
oden pallets 1200x800 mm. Connection accessories (pins, cotter pins, nuts, washers) are delivered si-
multaneously in a separate box.
Assembly of the garland is done on site.

Surface finish
anti-corrosive primer synthetic coating

2600

2500
B=18
00
2400
A0 [mm]

2300

2200 B=160
0
2100

2000
10 12 14 16 18 20 22 24
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Bottom garland station GLRV B1600, 3-22584-17613, 50 pieces

Manufacturer reserves the right to make changes without notice.

 BOTTOM GARLAND STATION
GORD 194 / 108 / 6308 83

• station consists of two disc garland rollers ø194/108 with bearing 6308 (page 54)
• rollers are connected by loops and „C“ suspensions
• station is suspended by chains

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1
1600 3-22384-17612 900 1054 70,3
1800 1-22384-18611 1000 1154 78,9

Garland station is delivered unassembled as single rollers including suspending chains on wooden pal-
lets 1200x800 mm. Connection accessories („C“ suspensions) are delivered simultaneously in a separa-
te box.
Assembly of the garland is done on site.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3) polyester powder coating 2600

2500 B=1
800
2400
A0 [mm]

2300
B=16
2200 00

2100
10 12 14 16 18 20 22 24
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Bottom garland station GORD B1600, 3-22384-17612, 50 pieces

Manufacturer reserves the right to make changes without notice.

 BOTTOM GARLAND STATION CORRUGATED
84 GORV 194 / 108 / 6308

• station consists of two corrugated garland rollers ø194/108 with bearing 6308 (page 55)
• rollers are connected by loops and „C“ suspensions
• station is suspended by chains

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1
1600 3-22384-17610 900 1054 98,8
1800 3-22384-18610 1000 1154 108,5

Garland station is delivered unassembled as single rollers including suspending chains on wooden pallets
1200x800 mm. Connection accessories („C“ suspensions) are delivered simultaneously in a separate box.
Assembly of the garland is done on site.

Surface finish
anti-corrosive primer synthetic coating

2600

2500 B=1
800
2400
A0 [mm]

2300
B=16
2200 00

2100
10 12 14 16 18 20 22 24
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Bottom garland station GORV B1600, 3-22384-17610, 50 pieces

Manufacturer reserves the right to make changes without notice.

 BOTTOM GARLAND STATION
GLRD 245 / 133 / 6310 85

• station consists of two disc garland roller ø245/133 with bearing 6310 (page 56)
• rollers are connected by slats and pins
• station is suspended by chains

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1 L2 d1×p
2000 3-22594-19609 1150 1210 256 16×45 150,2
2250 1-22594-11709 1250 1310 279 18×50 162,8

Garland station is delivered unassembled as single rollers including suspending chains and slats on wo-
oden pallets 1200x800 mm. Connection accessories (pins, cotter pins, nuts, washers) are delivered si-
multaneously in a separate box.
Assembly of the garland is done on site.

Surface finish – possible solutions

1) without coating
2) synthetic basic coating
3200
3) polyesther powder coating
3100
B=2
250
3000
A0 [mm]

2900

2800
B=20
00
2700

2600
10 12 14 16 18 20 22 24
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Bottom garland station GLRD B2000, 3-22594-19609, 50 pieces

Manufacturer reserves the right to make changes without notice.

 BOTTOM GARLAND STATION
86 GORD 245 / 133 / 6310

• station consists of two disc garland rollers ø245/133 with bearing 6310 (page 56)
• rollers are connected by loops and „C“ suspensions
• station is suspended by chains

Dimensions [mm]
Belt width Drawing no. Weight [kg]
L L1
2000 3-22394-19611 1157 1309 154,1
2250 3-22394-11711 1257 1409 166,9

Garland station is delivered unassembled as single rollers including suspending chains on wooden pal-
lets 1200x800 mm. Connection accessories („C“ suspensions) are delivered simultaneously in a separa-
te box.
Assembly of the garland is done on site.

Surface finish – possible solutions:

1) without coating
2) synthetic basic coating
3) polyester powder coating 3200

3100 B=2
250
3000
A0 [mm]

2900

2800 B=20
00
2700

2600
10 12 14 16 18 20 22 24
α [°]

Ordering example
Name, size, drawing number, quantity (pcs)
Bottom garland station GORD B2000, 3-22394-19611, 50 pieces

Manufacturer reserves the right to make changes without notice.

 Date

Company

Contact person

Address

Telephone

e-mail

ROLLERS FOR BELT CONVEYOR

DEMAND SHEET

Ø
d1
ØD
Ød

ØD
Ød
s

L L
L1 L1
L2 L2

Rollers' location in the conveyor Upper (carrying) Lower (retur- Impact places
branch ning) branch

Roller parameters – obligatory data

Number of pieces pc

Roller diameter D mm

Roller bearings – size —

Roller length L mm

Mounting length L1 mm

Roller axle length L2 mm

Roller axle end diameter d mm

Axle end milling down width s mm

Axle end hole diameter d1 mm

Tube wall thickness mm

Working temperature range °C

 other:
 increased dustiness  abrasive
Working environment
 increased humidity  chem. aggressive

Conveyor parameters – non obligatory data

Transport capacity t/h

Conveyor velocity m/s

Belt width mm

Belt specific weight kg/m2

Stands spacing m

Inclination angle of side rollers °

Transported material

Density t/m3

Lumpiness mm

Other requirements

Completing information
 Location of returning rollers' discs:
Počet a
Quantity rozteče
and spacing disků
of discs

Ø Dp
ØD

Different ending of rollers' axles, scheme:

Further detailed description:

Notes
Notes