500D
High Pressure Syringe Pump
The 500D syringe pump provides precise, predictable flow and
pressure control at flow rates from sub-microliter up to 204 mL/
min. Exceptional low-flow stability at up to 259 bar (3,750 psi)
makes this the ideal pump for high pressure applications from
deep well core analysis to a wide range of chemical applications.
Ideal for a wide range of chemical feed
and core flooding applications.
The D-series controller has a keypad and LCD, as well as built-in
and optional interfaces for computer control and other devices.
Programming is easy and flexible, with instant access to menu Applications:
screens even when the pump is running. This allows you to
change operating parameters on the fly. An optional extension •Precision fluid addition in research
cable lets you locate the controller up to 15 meters (50 feet) and manufacturing processes
from the pump. •Chemical/Reactant feed in chemical
process development, catalyst
The 500D pump module has a single-ratio drive train with evaluation, plastic formulation
auto-lubricating gears for long life and low maintenance. •Accurate metering of liquefied gases
Special fittings are used to prevent leaks and ensure safety
at maximum pressure. Standard
Wetted materials are compatible with most aqueous and organic Controller Features:
liquids, corrosive solutions, heated fluids, liquefied gases, viscous •Operating Modes
fluids, or slurries and pastes. - Constant flow or pressure with up
to four pumps
- Gradient LC programming
- Flow or pressure programming with
a single pump
- Continuous flow or pressure with
dual pump
•External Interface
- RS232/485 serial interface
- Analog voltage inputs
- Digital inputs and output
500D Specifications 500D Options & Accessories
Pump Module: 500D •Hastelloy 276 cylinder for added corrosion resistance
Capacity: 507.38 mL •Temperature control jacket (i.e. cylinder cooling for filling
with liquefied gas)
Flow Range (mL/min): 0.001 µL – 204 mL/min*
•High-precision pressure transducers
Flow Accuracy: + 0.5% of setpoint, (Maximum 1.0 μL/min (0.1% linear accuracy)
seal leakage)
•Drivers for LabVIEW—National Instruments
Displacement 31.71 nl/stop
•4-20 mA inputs and outputs for flow rate and
Resolution:
pressure control
Pressure Range: 0.7–258.6 bar (10 –3,750 psi)
•Hazardous Location Systems available
Standard Pressure 0.5% FS
Accuracy:
Ordering Information
Optional Pressure 0.1% FS
Accuracy: 500D Pump Module Only........................................................68-1240-025
D Series Controller Only.........................................................68-1240-026
Wetted Materials Nitronic 50, Graphite filled PTFE, TFE,
(Standard): Hastelloy C-276, Inert Polymers 500D Pump and Controller.....................................................68-1240-522
Plumbing Ports: 1/8” NPT A500 Continuous Flow System with Air Valves...................... 67-9000-061
A500 Continuous Flow System with Air.................................... 67-1240-267
Operating Temperature: 5–40 °C Ambient Valves and Hastelloy
Power Required: 100 VAC, 117 VAC, 234 VAC, 50/60 Hz A500 Continuous Flow System with Air.................................67-1240-268
(specify) Valves and High Temperature Package
Dimensions (H x W x D) 102 x 27 x 47 cm A500 Continuous Flow System with Air.................................67-1240-269
(40.3 x 10.7 x 18.4 in) Valves and Temperature Control Jackets
E500 Continuous Flow System with Electric Valves...............67-9000-192
Weight: Pump unit—33.3 kg (73.3 lb),
Controller—3.0 kg (6.5 lb)
Standards Conformity: EN61326:2013, EN61010-1:2010
Compliant to the European Machinery
Directive 2006/42/EC and the European
Pressure Equipment Directive (PED)
2014/68/EU
*Maximum flow rate is dependent upon operating pressure. (See manual for
additional information.)
500D
Continuous
Flow System
Teledyne ISCO
P.O. Box 82531, Lincoln, Nebraska, 68501 USA
Toll-free: (800) 228-4373 • Phone: (402) 464-0231 • Fax: (402) 465-3091
teledyneisco.com
Teledyne ISCO is continually improving its products and reserves the right to change product L-7112 Rev 2.0
specifications, replacement parts, schematics, and instructions without notice. 03/19
