Scribd
Upload
778 views1 page

Hilti D16

This document provides recommended load values for various Hilti HIT-RE 500-SD rebar anchors embedded in concrete with a compressive strength of 25 N/mm2. It lists tensile and shear load capacities for single anchors with and without minimum edge distances, and for double anchors with minimum spacing. Load values are provided for non-cracked and cracked concrete conditions and are based on data from the product's technical approval.

Uploaded by

Ina Rose
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
778 views1 page

Hilti D16

This document provides recommended load values for various Hilti HIT-RE 500-SD rebar anchors embedded in concrete with a compressive strength of 25 N/mm2. It lists tensile and shear load capacities for single anchors with and without minimum edge distances, and for double anchors with minimum spacing. Load values are provided for non-cracked and cracked concrete conditions and are based on data from the product's technical approval.

Uploaded by

Ina Rose
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Hilti HIT-RE

Hilti HIT-RE 500-SD


500-SD
with
with rebar

Recommended loads: concrete C 20/25 – fck,cube = 25 N/mm², Temperature range I


Data according ETA-07/0260, issue 2009-01-12
Anchor size Ø8 Ø10 Ø12 Ø14 Ø16 Ø20 Ø25 Ø28 Ø32
Embedment depth hef,typ = [mm] 80 90 110 125 125 170 210 270 300
Base material thickness hmin= [mm] 110 120 142 161 165 220 274 340 380
Tensile Nrec: single anchor, no edge effects
Non cracked concrete
BSt 500 S [kN] 12,0 16,8 23,1 28,0 24,0 38,1 52,3 76,2 89,3
Cracked concrete
BSt 500 S [kN] 6,4 9,0 12,3 15,3 15,0 25,4 37,3 52,5 61,5
Shear Vrec: single anchor, no edge effects, without lever arm
Non cracked concrete
BSt 500 S [kN] 6,7 10,5 14,8 20,0 26,2 41,0 64,3 80,5 105,2
Cracked concrete
BSt 500 S [kN] 6,7 10,5 14,8 20,0 26,2 41,0 64,3 80,5 105,2

Recommended loads: concrete C 20/25 – fck,cube = 25 N/mm², Temperature range I


Data according ETA-07/0260, issue 2009-01-12
Anchor size Ø8 Ø10 Ø12 Ø14 Ø16 Ø20 Ø25 Ø28 Ø32
Embedment depth hef,typ = [mm] 80 90 110 125 125 170 210 270 300
Base material thickness hmin= [mm] 110 120 142 161 165 220 274 340 380
Edge distance c = cmin= [mm] 40 50 60 70 80 100 125 140 160
Tensile Nrec: single anchor, min. edge distance (c = cmin)
Non cracked concrete
BSt 500 S [kN] 6,5 8,3 11,1 13,5 12,2 18,7 25,8 36,0 42,5
Cracked concrete
BSt 500 S [kN] 3,1 4,3 6,0 7,5 7,3 12,4 18,4 25,7 30,3
Shear Vrec: single anchor, min. edge distance (c = cmin) , without lever arm
Non cracked concrete
BSt 500 S [kN] 2,7 3,8 5,2 6,8 8,2 12,3 17,9 22,6 28,1
Cracked concrete
BSt 500 S [kN] 1,9 2,7 3,7 4,8 5,8 8,7 12,6 16,0 19,9

Recommended loads: concrete C 20/25 – fck,cube = 25 N/mm², Temperature range I


(load values are valid for single anchor)
Data according ETA-07/0260, issue 2009-01-12
Anchor size Ø8 Ø10 Ø12 Ø14 Ø16 Ø20 Ø25 Ø28 Ø32
Embedment depth hef,typ = [mm] 80 90 110 125 125 170 210 270 300
Base material thickness hmin= [mm] 110 120 142 161 165 220 274 340 380
Spacing s = smin= [mm] 40 50 60 70 80 100 125 140 160
Tensile Nrec: double anchor, no edge effects, min. spacing (s = smin)
Non cracked concrete
BSt 500 S [kN] 7,4 9,6 13,0 15,7 13,7 21,5 29,6 42,5 49,9
Cracked concrete
BSt 500 S [kN] 4,2 5,8 7,9 9,8 9,5 15,3 21,1 30,3 35,6
Shear Vrec: double anchor, no edge effects, min. spacing (s = smin), without lever arm
Non cracked concrete
BSt 500 S [kN] 6,7 10,5 14,8 20,0 26,2 41,0 64,3 80,5 105,2
Cracked concrete
BSt 500 S [kN] 6,7 10,5 14,8 20,0 25,4 41,0 62,5 80,5 101,5
For the recommended loads an overall partial safety factor for action J = 1,4 is considered. The partial safety
factors for action depend on the type of loading and shall be taken from national regulations.

11 / 2010
2014 433
379

You might also like