Scribd
Upload
153 views12 pages

Deep Foundation Study Proposal

This document contains a proposal for an engineering thesis on studying deep foundations. The proposal outlines studying the design capacity of pile foundations and comparing the results to simulations in PLAXIS 3D software. The methodology will involve estimating the bearing capacity and frictional resistance of piles, calculating settlement of single and group piles, and verifying pile capacity and reinforcement. The expected results are that the manual calculations and software results will be acceptably comparable after studying this topic.

Uploaded by

Vann Theara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
153 views12 pages

Deep Foundation Study Proposal

This document contains a proposal for an engineering thesis on studying deep foundations. The proposal outlines studying the design capacity of pile foundations and comparing the results to simulations in PLAXIS 3D software. The methodology will involve estimating the bearing capacity and frictional resistance of piles, calculating settlement of single and group piles, and verifying pile capacity and reinforcement. The expected results are that the manual calculations and software results will be acceptably comparable after studying this topic.

Uploaded by

Vann Theara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

High Rise Steel Design & Build Co., Ltd.

Proposal For Engineering’s Thesis


Topic: Study of Deep Foundation

Presented by VANN Theara


Checked by Mr. CHEANG Sengchhoung

12 Oct 2019

1
Contents

1. Introduction

2. Methodology

3. Expected Results

4. References

2
1. Introduction
1.1 General

❑ Topic : Study of Deep Foundation

❑ Company : HIGH RISE STEEL DESIGN&BUILD CO., LTD.

❑ Project: អាគារការិយាល័យ​និង​ពាណិជ្ចកម្ម​២២​ជាន់

3
1. Introduction
1.1 General
❑ What is Foundation ?

• Is the structural member that transmit the super structure load


to the lower layer of soil.

❑ Foundation has divided into 2 categories:

▪ Shallow Foundation

▪ Deep Foundation

Figure 1. A building with foundation

4
1. Introduction
1.1 General
❑ Deep Foundation

➢ Pile Foundation
• Isolated pile

• Group pile

➢ Raft Foundation

Figure 3: Isolated and Group Pile

5
1. Introduction
1.2 Objective
❑ Design capacity of pile foundation
❑ And compare results with PLAXIS 3D software

Figure 5: Pile Settlement


Figure 4: Pile Capacity

6
1. Introduction
1.2 Scope
❑ Design capacity of pile foundation
❑ Calculate the settlement of single and group pile
❑ And compare results with PLAXIS 3D software

7
3. Methodology
Estimate capacity of pile

min

End Bearing Capacity + Frictional Resistance Capacity limited of pile Total Settlement of pile

Elastic settlement of pile :Se1

Settlement caused by load at pile tip :Se2

Verify Pile Cap Settlement caused by load transmitted


along skin friction:Se3

Pre-Dimension

One Way Shear Two Way Shear Verify Reinforcement

Following EUROCODE

8
3. Expected Results

After Studying this topic through this methodology


and other problems, I hope I can both results between
manual calculated and software results which can
acceptable .

9
3. References

[1].Braja M. Das, Principles of Foundation Engineering, Eighth Edition


[2].DONALD P.CODUTO, Foundation Design : Principles and Practices,
Second Edition

10
Question?

You might also like