CBA300 Series Pneumatic Actuators

Improved Design - Compact, Lightweight To Suit All Applications And Environment

 Design and Construction
Emerson Process Management - Valve Automation has been a pioneer and
leader in the valve automation and control industry for more than 55-years.
During that time, we have developed numerous innovations that have become
today’s standards. We continue to focus on ingenuity, quality and product safety
Bettis is the global leader in in our entire product offering. We are considered to be the global standard
valve automation, providing for automating valves in the oil & gas, power generation, pulp and paper,
reliable solutions for the petrochemical and chemical and numerous other process industries. Performance
has been the differentiator. We are recognized for effectiveness and reliability in
most demanding service in some of the world’s most difficult operating environments.
the process industry.
The Bettis™ CBA300 Series pneumatic actuators incorporate the most advanced
features from a long history of developments in the scotch-yoke design, assuring
The CBA300 actuators operating efficiency and cost-effectiveness. They are lightweight and compact,
combine the strength of making them ideally suited for automating virtually any quarter turn (90 degree)
scotch-yoke actuation with rotating mechanism, including ball, butterfly, and plug valves. They are economical
and require little maintenance. They come with a variety of options to meet your
design innovations for cost demanding valve automation needs.
efficiency and performance
effectiveness. CBA300 Series Applications And Features

• The actuators are PED 97/23/EC compliant to meet the stringent requirements of
The CBA300 protects against pressure mounting vessels
water ingress, adding to
the life of the actuator by • The 300-Series actuators meet both IP66 and IP67M specifications for
submergence and severe high pressure water deluge test. This offers superior
retarding corrosion. water ingress and corrosion protection. The actuator has no gaskets and is totally
O-ring sealed
A variety of options helps
make the CBA300 suitable for • Its NAMUR topworks mounting configuration allows the CBA300 to be
internationally accepted and promotes the ability to utilize standardized
fail-safe service. accessories that can be close coupled or direct mounted to the valve

• The CBA300 Series provides models in both spring-return and double-acting

configurations. They have guaranteed minimum torque outputs ranging from
7,388 lb-in to 20,337 lb-in (835 to 2,333 Nm) in double-acting models. Spring-
return models, requiring pressure from only one travel direction, are available for
fail clockwise or counterclockwise applications. The spring ending torques range
from 2,532 lb-in to 10,457 lb-in (286 to 1,182 Nm)

• The scotch-yoke design provides optimum torque curves for quarter-turn

operation

• Its light weight assists in easy installation while its compactness allows use in tight
piping configurations

• Increased actuator efficiency and corrosion resistance are possible with a Xylan
fluoropolymer coating on the interior of the power cylinder. This permanently-
bonded coating is highly resistant to abrasion, thermal shock and provides
excellent lubricity and low friction properties

• Ductile iron housing and piston provide more strength per pound, increased
durability and corrosion resistance. The pressure vessel quality housing is
approved for use by ASME and the Pressure Equipment Directive (PED 97/23/EC)

• 5-year warranty
Operating Principle
Both the double-acting and single-acting (spring-return)
versions of the CBA300 pneumatic actuators are designed in Standard stop screw
such a way that there are no moving parts on the outside (with
the exception of the position indicator). This makes them safe,
easy to install and virtually maintenance free.

M-11 Hydraulic Override Configuration

Environmental Protection
Reliability of an actuator is crucial for
the safety of a plant’s automation process and
personnel. The CBA300 actuator is independently certified
to IEC 60529, IP66 and IP67M water ingress protection to
prevent corrosion within the actuator. To help achieve this
rating, the actuators incorporate a proven design with a
quad sealed torque shaft – two independent seals on the
lower shaft, an outer seal to protect the large bearing area
and primary inner-cup seal from the environment. The upper
seal area has a double-lip, bi-directional seal to provide a
high level of protection against corrosion and the elements.

Temperature extremes require different solutions to High Performance Springs

maintain actuator operational integrity and reliability. Each The CBA300 actuators have high strength, high-performance
CBA300 actuator is available in three different temperature alloy carbon steel springs, protected by Tactyl 50, a pliable
trims. The standard trim is suitable for -20°F to +200°F (-29°C self-healing coating. The spring cycle life of the springs is
to +93°C). Optional high temperature trim allows operation further extended with the shot peening of the springs during
from 0°F to +350°F (-18°C to +177°C) and special non-PED manufacture, and additional step that further differentiates
low temperature trims 40°F to +150°F (-40°C to +66°C) can its quality from others.
be supplied on factory built actuators or upgraded at the
distributor or end user level. Pneumatic operating pressures
for the CBA300 range from 40 to 150 psig (3 to 10 Bar).
Override Options Safety Integrity Level (SIL)
Override modules, used to reposition a valve and provide Bettis CBA300 Series actuators are suitable for use within the
full rated torque in the event of a power loss can be demanding applications of a SIL environment. The actuators
supplied with a jackscrew and hex nut adaptor or a have a Failure Modes and Effects Diagnostics Analysis
jackscrew with handwheel. The CBA300 actuators come (FMEDA) report performed by [Link]™ for SIL suitability.
with a blowout-proof jackscrew that absorbs impact They can be combined with other SIL-rated components
loads at maximum recommended actuator speeds. such as solenoid valves, switches, and regulators. When
Double-acting models can be supplied with one or two Fisher’s TÜV-certified FIELDVUE® controller is added to
jackscrews. The M-11 hydraulic override is also available the CBA300, it is capable of partial stroke testing and of
for the CBA300. providing continuous monitoring of supply pressure, valve
position and pressure values to the actuator to verify its
Long Life Span proper working condition. The CBA300 then becomes an
The rugged and dependable construction of the CBA300 integral component in controlling the final control element
actuator is backed by Bettis’ industry leading five-year in SIL 1, 2 or 3 applications.
warranty on materials and workmanship. With the
use of superior design and materials throughout the Efficient Bearing Design
construction, CBA300 spring-return and double-acting Bearings assist in enhancing the cycle life of the actuators
actuators will have a long cycle life when properly by providing smooth and consistent torque output. The
maintained and sized. CBA300 Series actuator pistons have three field-replaceable
bearings. In addition, the actuator features PTFE-coated
Travel Stops upper and lower torque shaft bearings for wear resistance,
Instrumentation for valve also replaceable in the field.
automation requires
repeatable positioning and
position indication. Bettis
CBA300 actuators include
bi-directional travel stops
as an integral part of the
actuator. These travel stops
are adjustable from 80° to
100° of total valve travel.
This feature, with its unmatched travel range, assists in
prolonging valve seat integrity.

Jackscrew Option
(See insert for standard stop
screw configuration)

Applications requiring greater adjustment of valve travel

can be supplied with the optional extended travel stops
for full valve stroke travel adjustment and use as a lockout
device. Consult the factory for this option.

For more detailed technical information see our

online documentation under [Link]/technical-data
Document number [[Link]] Emerson WACC can provide actuators for specialty applications
such as fire-retardant coatings and treatments
 Actuator / Accessory Interfaces

Standards and Certifications

Bettis CBA300 pneumatic actuators are manufactured to meet the following

worldwide quality and safety standards:

PED/97/23/EC –
Pressure
Equipment
ISO-9001 ABS Directive

Bettis CBA300
with Topworx Positioner Bettis Automated Packages
Bettis offers complete valve
operating system as a solution for
final valve control. Bettis has the
capability to combine the CBA300
actuator and controls with the
selected valve into a single system
at various international Valve
Automation World Automation
Configuration Centers (WACC)
– perfect for large international
projects.

Through the use of Valve

Bettis CBA300
Automation World Automation
with Wireless Transmitter
Configuration Centers, Bettis can
integrate its products with a complete
offering of control options, including
world-class PlantWeb® digital plant
architecture and the entire range of
Emerson automation solutions.

BettiSystems™
To assist with valve automation
solutions, Bettis has pre-engineered
and documented a series of
commonly required control
systems. These approved systems
utilize standard components, reduce
lead times, and simplify purchasing,
installation and start-up.

Please consult the factory for additional information.

Emerson brands for most common control accessories:

Digital Valve Controllers: Fisher ®

Positioners: Fisher ®
Regulators: Fisher ®
Switch boxes: TopWorx
Wireless position monitor: TopWorx
Solenoid valves: ASCO Numatics™
World Area Configuration Centers (WACC) offer sales support, service,
inventory and commissioning to our global customers. Choose the WACC
or sales office nearest you:

NORTH & SOUTH AMERICA MIDDLE EAST & AFRICA

19200 Northwest Freeway P. O. Box 17033

Houston, TX 77065 Dubai
USA United Arab Emirates
T +1 281 477 4100 T +971 4 811 8100
F +1 281 477 2809 F +971 4 886 5465

Av. Hollingsworth, P. O. Box 10305

325, Iporanga Sorocaba Jubail 31961
SP 18087-105 Saudi Arabia
Brazil T +966 3 340 8650
T +55 15 3238 3788 F +966 3 340 8790
F +55 15 3228 3300
24 Angus Crescent
ASIA PACIFIC Longmeadow Business Estate East
P.O. Box 6908; Greenstone
No. 9 Gul Road 1616 Modderfontein, Extension 5
#01-02 Singapore 629361 South Africa
T +65 6501 4600 T +27 11 451 3700
F +65 6268 0028 F +27 11 451 3800

No. 1 Lai Yuan Road EUROPE

Wuqing Development Area
Tianjin 301700 Asveldweg 11
P. R. China 7556 BR Hengelo (O)
T +86 22 8212 3300 The Netherlands
F +86 22 8212 3308 T +31 74 256 1010
F +31 74 291 0938
©2015 Emerson Process Management. All rights reserved.

For complete list of sales and manufacturing sites, please visit The Emerson logo is a trademark and service mark of Emerson Electric Co. Bettis™
[Link]/valveautomationlocations is a mark of one of the Emerson Process Management family of companies. All other
Or contact us at [Link]@[Link] marks are property of their respective owners.

[Link]/bettis
[Link] Rev F 06-15