Scribd
Upload
103 views2 pages

Strength of Materials II Overview

The document outlines the topics to be covered in the Strength of Materials-II course for the fourth semester of the B. Tech Aeronautical Engineering program. The four units cover strain energy and impact loading, theories of elastic failure, unsymmetrical bending, thick cylinders and spheres, rotating rims and discs, and bending of curved bars. Numerical problems are included for each topic. Recommended textbooks and references for the course are also provided.

Uploaded by

ATANU PAUL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
103 views2 pages

Strength of Materials II Overview

The document outlines the topics to be covered in the Strength of Materials-II course for the fourth semester of the B. Tech Aeronautical Engineering program. The four units cover strain energy and impact loading, theories of elastic failure, unsymmetrical bending, thick cylinders and spheres, rotating rims and discs, and bending of curved bars. Numerical problems are included for each topic. Recommended textbooks and references for the course are also provided.

Uploaded by

ATANU PAUL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd

B. Tech.

(Fourth Semester) Aeronautical Engineering

Strength of Materials -II


ME- 206 E
Unit I

Strain Energy & Impact Loading: Definitions, expressions for strain energy stored in a body
when load is applied (i) gradually, (ii) suddenly and (iii) with impact,
Strain energy of beams in bending, beam deflections,
Strain energy of shafts in twisting,
Energy methods in determining spring deflection,
Castigliano’s & Maxwell’s theorems, Numerical.

Theories of Elastic Failure: Various theories of elastic failures with derivations and graphical
representations, applications to problems of 2- dimensional stress system with (i) Combined
direct loading and bending, and
(ii) combined torsional and direct loading, Numericals.
Unit II
Unsymmetrical Bending: Properties of beam cross section, product of inertia, ellipse of inertia,
slope of the neutral axis, stresses & deflections, shear center and the flexural axis Numericals.

Thin Walled Vessels : Hoop & Longitudinal stresses & strains in cylindrical & spherical vessels
& their derivations under internal pressure, wire would cylinders, Numericals.
UNIT III
Thick Cylinders & Spheres : Derivation of Lame’s equations, radial & hoop stresses and strains
in thick, and compound cylinders and spherical shells subjected to internal fluid pressure only,
wire wound cylinders, hub shrunk on solid shaft, Numericals.

Rotating Rims & Discs: Stresses in uniform rotating rings & discs, rotating discs of uniform
strength, stresses in ( I) rotating rims, neglecting the effect of spokes, (ii) rotating cylinders,
hollow cylinders & solids cylinders. Numericals.
UNIT IV
Bending of Curved Bars : Stresses in bars of initial large radius of curvature, bars of initial
small radius of curvature, stresses in crane hooks, rings of circular & trapezoidal sections,
deflection of curved bars & rings, deflection of rings by Castigliano’s theorem stresses in simple
chain link, deflection of simple chain links, Problems.

Springs: Stresses in open coiled helical spring subjected to axial loads and twisting couples, leaf
springs, flat spiral springs, concentric springs, Numericals.
Text Books:
1. Strength of Materials – G.H.Ryder, Third Edition in SI Units 1969 Macmillan, India. 2.
Mechanics of Materials – (Metric Edition) : Ferdinand P. Beer and E. Russel Johnston,
Jr. Second Edition, McGraw Hill.
References :.
Book of Solid Mechanics – Kazmi, Tata Mc Graw Hill
Strength of Materials – D.S. Bedi - S. Chand & Co. Ltd.
Advanced Mechanics of Solids and Structures – N. Krishan Raju and D.R.Gururaje-Narosa
Publishing House.
Strength of Materials – Andrew Pytel and Fredinand L. Singer Fourth Edition, Int.
Student Ed. Addison – Wesley Longman.

You might also like