Scribd
Upload
1K views4 pages

Deflection Calculation for Beams

This document contains calculations to determine the deflection of two reinforced concrete beams. For the first beam, the total calculated deflection is 33.42062761 mm, which is less than the permissible deflection of 37 mm. For the second beam, the total calculated deflection is 2.41019264 mm, which is less than the permissible deflection of 16 mm. Therefore, both beams are determined to be safe based on deflection criteria.

Uploaded by

rammohan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
1K views4 pages

Deflection Calculation for Beams

This document contains calculations to determine the deflection of two reinforced concrete beams. For the first beam, the total calculated deflection is 33.42062761 mm, which is less than the permissible deflection of 37 mm. For the second beam, the total calculated deflection is 2.41019264 mm, which is less than the permissible deflection of 16 mm. Therefore, both beams are determined to be safe based on deflection criteria.

Uploaded by

rammohan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
  • Calculation of Deflection (Simply Supported Beam)
  • Calculation of Deflection (Cantilever Beam)

CALCULATION OF DEFLECTION

Enter the service moment M = 129.98 KN-m


Length of the beam = 9.25 m
Size of the beam b = 250 mm D= 750 mm
fck = 25 N/mm 2

fy = 415 N/mm2

Gross moment of inertia Ig = 8789062500.00


Modulus of rupture fcr = 3.5 N/m2
Yt = D/2 = 375.00 mm
Mr = 82031250 N-mm
Effective cover of the beam d’ = 52.5 mm
d = 697.5
. d’/d = 0.08
Ec = 25000 N/mm2
m= 8
Percentage of tension steel Pt = 1
Percentage of Compression steel Pc = 0
Pc(m-1)/Ptm = 0
Ptm = 8
Take the value of Ir/(bd3/12) from the tables for d’/d, Pc(m-1)/Ptm, and Ptm = 0.589

Ir = 4163961383.79 mm2
from table x/d = 0.32 Table 92 of SP:16
M r/M = 0.63
from chart Ieff /Ir = 1.05 Chart 89 of SP:16
Ieff = 4372159452.97852 mm2

Ir ≤ Ieff ≤ Ig → O.K.

Enter the udl value w = 26.9 KN/m

BEAM TYPE 1 SIMPLY SUPPORTED.


Factor = 0.01302
Elastic deformation = 23.45817351 mm

Deflection due to shrinkage:

BEAM TYPE 1 SIMPLY SUPPORTED BEAM

K3 = 0.125

K4 = 0.72
Shrinkage curvature ψcs = 2.88E-07
Deflection due to shrinkage = 3.08025 mm

Deflection due to creep:


θ = 1.6
Ece = 9615.384615 N/mm2
m= 20.8
Pc(m-1)/Ptm = 0
Ptm = 20.8
Take the value of Ir/(bd3/12) from the tables for d’/d, Pc(m-1)/Ptm, and Ptm = 1.597
Ir = 11290061680.6641 mm4
Ieff=Ig = 8789062500.00 mm4
aice(perm) = 30.3403776146987 mm4
ai(perm) = 23.45817351 mm
Deflection due to creep = 6.882204107 mm

Total deflection = 33.42062761 mm


Permissible deflection = 37 mm SAFE
CALCULATION OF DEFLECTION

Enter the factored moment M = 1883.52 KN-m


Length of the beam = 4 m
Size of the beam b = 750 mm D= 950 mm
fck = 30 N/mm 2

fy = 500 N/mm2

Gross moment of inertia Ig = 53585937500.00


Modulus of rupture fcr = 3.834057903 N/m2
Yt = D/2 = 475.00 mm
Mr = 432529657 N-mm
Effective cover of the beam d’ = 126 mm
d = 824
. d’/d = 0.16
Ec = 27386.12788 N/mm2
m= 7.302967433
Percentage of tension steel Pt = 1.81
Percentage of Compression steel Pc = 0.866
Pc(m-1)/Ptm = 0.412938158
Ptm = 13.21837105
Take the value of Ir/(bd3/12) from the tables for d’/d, Pc(m-1)/Ptm, and Ptm = 0.898

Ir = 31400603072.00 mm2
from table x/d = 0.36 Table 91 of SP:16
Mr/M = 0.23
from chart Ieff /Ir = 1.00 Chart 89 of SP:16
Ieff = 31400603072 mm2

Ir ≤ Ieff ≤ Ig → O.K.

Enter the udl value w = 20 KN/m

BEAM TYPE 3 CANTILEVER BEAM.


Factor = 0.125
Elastic deformation = 0.744237164 mm

Deflection due to shrinkage:

BEAM TYPE 3 CANTILEVER BEAM

K3 = 0.5

K4 = 0.505202165
Shrinkage curvature ψcs = 1.59538E-07
Deflection due to shrinkage = 1.276300207 mm

Deflection due to creep:


θ = 1.6
Ece = 10533.12611 N/mm2
m= 18.98771533
Pc(m-1)/Ptm = 0.453255008
Ptm = 34.36776474
Take the value of Ir/(bd3/12) from the tables for d’/d, Pc(m-1)/Ptm, and Ptm = 1.597
Ir = 55842720608 mm4
Ieff=Ig = 53585937500.00 mm4
aice(perm) = 1.13389243298965 mm4
ai(perm) = 0.744237164 mm
Deflection due to creep = 0.389655269 mm

Total deflection = 2.41019264 mm


Permissible deflection = 16 mm SAFE

You might also like