CONTA-ELECTRONICS

GSM-PRO2
2G / 3G / 4G Remote Control
Solution

Product Information
Contents

Our company 3

The advantages online 4

Globally available for you 5

A complete line of products for 6

your challenges

GSM-PRO2 8

GSM-PRO2E 11

GSM-PRO2-4G-EU 12

GSM-PRO2-4G-US 12

GSM-PRO2E-4G-EU 13

GSM-PRO2E-4G-US 13

Expansion modules 14

Antenna 16
CONTA-CLIP:
thinking ahead for connection systems
CONTA-CLIP was founded in 1978. A high quality standard throughout all
We operate globally as an owner-operated departments is our number one priority.
medium-sized company.
Our top-class products are supported by this in-
Users of electrical and electronic connection sys- terplay between top-class men and machinery.
tems rely on our reliable products and our many We have also designed our range of services to
years of industrial and global market expertise. align with customer needs.

Our company is now one of the most important Our products are divided into six categories:
manufacturers in the field. CONTA-CONNECT for terminal blocks and
accessories, KDS cable management systems,
For over 40 years, our components and solutions CONTA-ELECTRONICS for electrical and
have been used in various process and industrial electronic switchgear cabinet components,
automation applications, including: railway CONTA-LABEL for marking systems, CONTA-BOX
technology, materials handling, building auto­ for housings, and CONTA-CON for PCB terminal
mation, air conditioning, mechanical and facility blocks and connectors.
engineering, measurement and control techno­­
logy, control panel construction, shipbuilding, We design customer-specific solutions for elec-
transformer construction and environmental tronics, provide completely assembled housings
technology. and assemblies as needed, assemble terminal
blocks for series production, and quickly handle
Over the years, we have evolved into an innovator component labelling tasks.
that sets the tone with new ideas and creative
impulses. We greet these challenges with passion and en-
thusiasm, because we see each customer as our
Our employees come from a wide variety of in- partner.
dustries and view themselves as true connectivity
specialists. They understand the specific problems, CONTA-CLIP customer representatives are always
requirements and challenges of our customers. ready to offer their support to the customer, be-
This results in communication among equals. cause service and helpfulness are rooted deeply
in our corporate philosophy.
The profits then flow into the development of
new products as well as into modern, efficient
manufacturing processes.

3
GSM-PRO2

Advantage online:
the CONTA-CLIP Online Catalogue
No matter where you are, as long as you're on- Application films: Complex functions be ex-
line you can access our digital catalogue to look plained easily and clearly with sounds and im-
at our services and quickly identify suitable solu- ages.
tions for your requirements.
Printed catalogue: Would you like an offline
Fast results Use the full-text search, enter an overview? Please ask for our free printed cata-
order number or use the convenient "step-by- logues.
step" feature search function.
Industry-specific: You will find the solutions
roject planning at a glance: After you've se-
P that are relevant for your industry, according to
lected the products, all the master data for the your expertise.
materials (sales data, technical data, drawings,
connection diagrams, classifications and approv- Newsletter: Do you want to stay up to date?
als) are made available as a data sheet or export Subscribe to our newsletter! Simply register, con-
file. firm our authentication e-mail, and you'll be reg-
ularly informed about all CONTA-CLIP news.
etailed inquiries about components can
D
be sent via the shopping cart directly to our iscover how the world of CONTA-CLIP and our
D
headquarters. Upon request, you will receive an website can deliver added value for you and your
e-mailed copy of your inquiry. projects!

4
 CONTA-ELECTRONICS

Globally available for you

Are you working abroad? No problem. Our worldwide sales and distribution partners
help us to be globally networked and provide on-time reliable deliveries. Simply scan
the QR code shown and you'll learn on our website about the sales partner responsible
for your country.

Our locations in Africa Our locations in Australia Russia

Algeria Australia Sweden
Morocco New Zealand Switzerland
Serbia
Our locations in Asia Our locations in Europe Slovakia
Bahrain Belgium Slovenia
China Bosnia and Herzegovina Spain
Hong Kong Bulgaria Czech Republic
India Denmark Ukraine
Israel Germany Hungary
Jordan Finland Belarus
Qatar France
Malaysia Greece Our locations in North America
Oman Great Britain Canada
Pakistan Ireland Mexico
Saudi Arabia Iceland United States
Singapore Italy
South Korea Croatia Our locations in South America
Taiwan Latvia Bolivia
Turkey Netherlands Brazil
United Arab Emirates Norway Chile
Austria Ecuador
Poland Columbia
Portugal
Romania

5
GSM-PRO2

A complete line of products to meet your demands

The CONTA-CLIP Catalogues
CONTA - CONNEC T
Terminal blocks with
01 CONTA-CONNECT
Push-in connection system
Terminal blocks with Push-in connection system
Our wide range of innovative PRK and FRK terminal blocks with the Push-in con-
01 Catalogue

nection system include feed-through terminals, PE terminals, disconnect termi-

nals, fused terminals, multi-level terminals, installation terminals and initiator
terminals, for conductor cross-sections from 0.2 mm² to 25 mm².

Cat. no. 98070.2

CONTA - CONNEC T
Terminal blocks with
02 CONTA-CONNECT
Screw connection system
and special purpose terminals Terminal blocks with screw connections and special terminals
Everything for classic wiring with screw connection systems (also for high
02 Catalogue

currents): SRK feed-through and PE terminals, RK high-temperature variants, TK

transformer terminals, HSK high-power stud terminals, SVB series screw distribu-
tor blocks, and the modular feed-through terminal systems from the SDK series.

Cat. no. 98071.2

CONTA - CONNEC T
Terminal blocks with
03 CONTA-CONNECT
Tension-spring connection system
Terminal blocks with tension-spring connection
Our versatile line of terminals with tension spring connections for conductor
03 Catalogue

cross-sections from 0.2 mm² to 16 mm² includes: the ZRK/ZSL series of feed-
through and PE terminals, the double-level ZRKD/ZSLD, the ZIKD three-level
terminal blocks, motor-connection terminals, (blade-) disconnect terminals,
fused terminals, direct-mount terminals, and initiator/actuator terminals for
transmitting positioning, encoder and alert signals.

Cat. no. 98072.2

CONTA - CONNEC T
Installation materials
04 CONTA-CONNECT
and other accessories
for terminal blocks Installation materials and other accessories for terminal blocks
Our installation products include cabling ducts, assembly tools, cable glands
04 Catalogue

with metric or PG threads, DIN rials, rail cutters and punching tools. The termi-
nal block accessories include different versions of end stops, wire-end ferrules,
and connectors.

Cat. no. 98073.2

CONTA - L ABEL
Marking components
05 CONTA-LABEL
for thermal transfer marking systems
Marking components for thermal-transfer marking systems
CONTA-CLIP provides the TTPCard thermal-transfer printer and a large selection
05 Catalogue

of PC, PVC and PVCF markers or labels in card format: for professional, perma-
nent labelling of terminals, devices, conductors, cables, facilities and switchgear
cabinets.

Cat. no. 98074.2

6
 CONTA-ELECTRONICS

Our catalogues are available in many languages!

CONTA - L ABEL
Marking components
06 CONTA-LABEL
for ink-based marking systems
Marking components for ink-based marking systems
The CONTA-LABEL products provide polyamide markers for labelling conductors,
06 Catalogue

cables, devices and facilities with ink print. These markers are available in many
shapes and colours: in the classic MC Maxicard format for self-printing with the
EMS plotter system EMS or other ink-jet systems, or ready-to-use customized
printed in the PMC Pocket-Maxicard format.

Cat. no. 98075.2

CONTA - BOX
Housings
07 CONTA-BOX
Housings
Our wide variety of housings made of polystyrene, polycarbonate, polyester,
07 Catalogue

ABS and aluminium deliver solutions for protecting electronic circuits, integrated
devices and terminal blocks. On request, the housings can be custom-processed
and assembled with our CONTA-CONNECT, CONTA-ELECTRONICS and
CONTA-CON product lines.

Cat. no. 98076.2

KDS CABLE MANAGEMENT SYSTEMS

KDS Cable entries,
08 KDS CABLE MANAGEMENT SYSTEMS
KES Cable entries,
SAB/SSAB/SABK Shielding solutions KDS cable entries | KES cable entries | SAB|SSAB|SABK shielding solutions
The KDS and KES cable entries enable a tool-free, IP66-sealed feed-through for
08 Catalogue

unassembled and assembled cables and hoses. The feed-through openings can
be adapted at any time to meet your requirements. The SAB shied-connection
clips can be used to provide a reliable shield contact with conductor diameters
from 3 mm to 35 mm.

Cat. no. 98077.2

CONTA-ELECTRONICS
Electrical and electronic
09 CONTA-ELECTRONICS
cabinet components
Electrical and electronic cabinet components
Our CONTA-ELECTRONICS products provide active and passive components for
09 Catalogue

the transfer and conversion of analogue and digital signals at the coupling level.
This product line includes power supplies, multi-function timing relays, coupling
relays, digital switching modules, interface modules, opto-couplers, signal con-
verters, GSM communication modules and much more.

Cat. no. 98078.2

CONTA - CON
PCB terminals
10 CONTA-CON
and connectors
PCB terminals and connectors
This catalogue presents our wide variety of CONTA-CON PCB terminal blocks
10 Catalogue

and connector systems. The modular components can be configured for any re-
quired number of poles. They are available in the wire connection types: wire
protection, eccentric, clamping yoke, and (for demanding operating conditions)
with tension-spring or Push-in wire terminations.

Cat. no. 98079.2

7
GSM-PRO2

GSM-PRO2 – the perfect communicator

GSM-PRO2 (E) – the perfect communicator
CONTA-CLIP's GSM-PRO2 series provides a 2G/3G and 4G remote control
and maintenance solution which allows you to monitor and control decentral-
ized facilities.

The GSM-PRO2(E) module informs you when the process reaches a user-de-
fined status or limit value. Digital and analogue inputs values can also be
transmitted via e-mail or SMS (text message). The digital relay outputs can be
switched using an SMS sent from the decentralized control room or from the
service technician. The process can be monitored and controlled remotely.
Monitoring and controlling the GSM-PRO2(E) modules is even easier when
using our iPhone or Android apps.

The inputs and outputs of the modules and their desired functions can be
configured using an easy-to-understand application.

GSM-PRO2 communicates with a PLC

The built-in Modbus RTU interface enables the GSM-PRO2 to be connected
as a slave to other controllers (such as a PLC). Thus, the GSM-PRO2 can be
used to conveniently expand a PLC system with additional GSM functionality.
By using predefined registers, the PLC can send an SMS or e-mail using the
GSM-PRO2 as a messenger. The PLC can also be controlled using the GSM- Modbus
RTU
PRO2. The module can set predefined registers to influence the PLC process
(analogue or digital).

Inputs and outputs

Both GSM-PRO2 modules are equipped with two multi-functional inputs, a
relay output and a pulse counter input. The two GSM-PRO2E variants are
equipped with ten multi-functional inputs, four relay outputs and a pulse
counter input. The pulse counter input can process a maximum of 1000
pulses per second and enables, for example, a photovoltaic system or a kWh
counter to be connected.

Expansion modules
The GSM-PRO2 modules also allow you to increase the number of availa-
ble inputs and outputs. Up to 15 I/O expansion modules in 4 different ver-
sions can be controlled from each module. Integrated plug-in connectors
are used to control and supply power to the modules. The expansion mod-
ules can also be configured using an easy-to-understand application.

8
 CONTA-ELECTRONICS

OTA (over-the-air) capabilities

In many systems or machines, some parameters or user entries may need to
be changed after the installation is completed. In such cases you may also
need to change parameters on the GSM-PRO2 module. The GSM-PRO2
module features OTA (over-the-air) functions for just such instances.

OTA configuration
Whether it is a user's new telephone number, a new I/O setting, a changed
module name or any other change: the settings of all GSM-PRO2 modules
can be adjusted comfortably and decentralized throughout the world.

OTA firmware updates

The GSM-PRO2 module can also update its firmware using OTA, so modules
with different versions can always be kept up to date.

GSM-PRO2-GPS Kiel

The GSM-PRO2-GPS module has an integrated GPS function with an external

Rostock

Wismar

Hamburg Schwerin
Neubrandenburg

antenna connection. The module can determine its location at any time and
Bremen

Hannover
Berlin
Münster Braunschweig

the user can then view the mapped location in a web browser. This way, it be-
Frankfurt

Bielefeld Hövelhof Magdeburg

Paderborn
Dortmund Cottbus
Leipzig

comes easy and clear to monitor the positions of portable systems or ma-
Düsseldorf Kassel Dresden
Erfurt Jena
Köln
Chemnitz
Aachen

chines at any time.

Frankfurt

Mannheim Würzburg
Nürnberg
Saarbrücken

Stuttgart Ingolstadt

Ulm Augsburg

Freiburg
München

Smartphone apps
CONTA-CLIP's iPhone and Android smartphone apps for the GSM-PRO2
modules provide a simple and fast solution so that you can get an overview
of each distributed system and application. These apps can show you the sta-
tus of all inputs and outputs from one or more GSM-PRO2 modules. They
also allow you some control over the process. Module outputs can be con-
trolled easily and directly using this app. The app buttons provide an intuitive
control interface (for controlling the heating, a motor, water pump, etc.).

Web Portal software

The GSM-PRO2, like most SMS modules, are often used as stand-alone units
in the field. These modules are put to use at various remote locations even
though they normally have configurations which are very similar. It is often
quite helpful to have one overall view of the status of all modules used in the
field. The new GSM-PRO2 portal software from CONTA-CLIP offers you pre-
cisely this possibility. All modules in the field can now be easily monitored
and run from a single local site or control panel.

9
GSM-PRO2

GSM-PRO2 GSM-PRO2-GPS
Circuit diagram

Dimensions (L x W x H) TS 35 / direct mount, mm 95 x 36 x 67 / 65 (without antenna) 95 x 36 x 67 / 65 (without antenna)
Weight, g 133 137
Type  GSM-PRO2 GSM-PRO2-GPS
Cat. no.Qty. 16368.21 16369.21
Input/output data
2 multi-function (analogue/digital) inputs 0 ... 10 V / 0(4) ...  20 mA /24 V DC (10 ...  30 V DC)
Resolution/accuracy (0 ... 10 V) (0 ... 20 mA) 20 mV / ± (20 mV +0.3 % of the measured value) –  40 μA / ± (40 μA +0.3 % of the measured value)
Input resistance (0 ... 10 V) (0 ... 20 mA) 80 kOhm  /  500 Ohm
Input current (dig. inputs) @10 V: 0.2 mA / @24 V: 0.5 mA / @30 V: 0.6 mA
UI minimum pulse duration 500 ms
Threshold of dig. Inputs Low < 2 V / High > 4 V
Counter, digital input (pull-down) 1000 pulses/sec. Max. pull-down resistance: 24 kOhm
Pull-down voltage source Typ. 10 ... 30 V DC, unregulated, depending on load
Relay output CO universal contact, 250 V ~
Continuous current / Inrush current (resistive load) 5 A / 5 A
Max. switching capacity 1200 VA at 240 V AC, 5 A
Lifespan at resistive load Electrical, at max. load: > 1.5 x 105 switching cycles. Mechanical: > 15 x 106 switching cycles
Max. switching frequency 6 min-1 at continuous current, 1200 min-1 without load
Contact material / Test voltage AgNi / 4 kV
GSM specifications
Frequency bands 2G: Quad-band GSM bands: 850, 900, 1800 and 1900 MHz
3G: Five-band UMTS (WCDMA/FDD) bands: 800, 850, 900, 1900 and 2100 MHz
SIM card Nano SIM
Antenna 50 Ohm impedance, SMA plug
GPS specifications
Frequency 1575 ... 1587 Mhz
Time to first fix (@ -140 dBm ) Hot < 2 s, warm < 35 s, cold < 46 s
Antenna 50 Ohm impedance, SMA plug
Voltage active antenna 3 V @ RF plug
Bus specifications
Interface ports Serial RS485, uninsulated
Voltage interface 24 V DC – 0.5 A
Bus protocol Modbus RTU
Modbus slave functionality is available Yes (no other expansion modules can be connected)
General information
Voltage supply 10 to 30 V DC
Current consumption 275 mA DC @ 24 V DC
Backup power Internal maintenance-free supercap capacitor
Operating / storage temperature -20 °C to +50 °C / -20 °C to +70 °C
Max. relative humidity 80 %, non-condensing
DIN VDE specifications Low Voltage Directive (LVD) 2014/35/EU, in compliance with EN 50178
Electromagnetic properties Directive 2014/30/EU, in compliance with EN 55011 and EN 61326-1
Frequency spectrum RED 2014/53/EU
Wire cross-section / Stripping length 0.2 ... 2.5 mm² screw terminal connection / 6 mm
Mounting / Installation position DIN rail TS35 or direct mounting / arbitrary
Material / Flammability class Housing: Noryl; terminals: polyamide 6.6 / UL94 V-0
Protection class (DIN 40050) IP 20
Accessories
Antenna GSM GSM-ANTENNA-90°
Cat. no.Qty. 16379.21
GPS antenna GSM-ANTENNA-GPS-3M-K
Cat. no.Qty. 16380.21
External combi-antenna GSM + GPS GSM-ANTENNA-EXTERNAL-GSM+GPS-SMA-3M
Cat. no.Qty. 16381.21
External GSM antenna GSM-ANTENNA-EXTERNAL-SMA-3M
Cat. no.Qty. 16061.21
External GSM antenna GSM-ANTENNA-EXTERNAL-SMA-5M
Cat. no.Qty. 16172.21
External GSM antenna GSM-ANTENNA-EXTERNAL-SMA-10M
Cat. no.Qty. 16173.21
Programming cable GSM-USB-MICRO-cable
Cat. no.Qty. 16382.21

10
 CONTA-ELECTRONICS

GSM-PRO2E GSM-PRO2E-GPS
Circuit diagram

Dimensions (L x W x H) TS 35 / direct mount, mm 95 x 88 x 67 / 65 (without antenna) 95 x 88 x 67 / 65 (without antenna)
Weight, g 188 190
Type  GSM-PRO2E GSM-PRO2E-GPS
Cat. no.Qty. 16407.21 16408.21
Input/output data
10 multi-function (analogue/digital) inputs 0 – 10 V / 0 (4) – 20 mA / 24 V DC (10 – 30 V DC)
Resolution/accuracy (0 ... 10 V) (0 ... 20 mA) 20 mV / ± (20 mV 0.3 % of the measured value) –  40 μA / ± (40 μA + 0.3 % of the measured value)
Input resistance (0 ... 10 V) (0 ... 20 mA) 80 kOhm  /  500 Ohm
Input current (dig. inputs) @10 V: 0.2 mA / @24 V: 0.5 mA / @30 V: 0.6 mA
UI minimum pulse duration 500 ms
Threshold of dig. Inputs Low < 2 V / High > 4 V
Counter, digital input (pull-down) 1000 pulses/sec. Max. pull-down resistance: 24 kOhm
Pull-down voltage source Typ. 10 ... 30 V DC, unregulated, depending on load
4 relay outputs CO universal contact, 250 V ~
Continuous current / Inrush current (resistive load) 5 A / 5 A
Max. switching capacity 1200 VA at 240 V AC, 5 A
Lifespan at resistive load Electrical, at max. load: > 1.5 x 105 switching cycles. Mechanical: > 15 x 106 switching cycles
Max. switching frequency 6 min-1 at continuous current, 1200 min-1 without load
Contact material / Test voltage AgNi / 4 kV
GSM specifications
Frequency bands 2G: Quad-band GSM bands: 850, 900, 1800 and 1900 MHz
3G: Five-band UMTS (WCDMA/FDD) bands: 800, 850, 900, 1900 and 2100 MHz
SIM card Nano SIM
Antenna 50 Ohm impedance, SMA plug
GPS specifications
Frequency 1575 ... 1587 Mhz
Time to first fix (@ -140 dBm ) Hot < 2 s, warm < 35 s, cold < 46 s
Antenna 50 Ohm impedance, SMA plug
Voltage active antenna 3 V @ RF plug
Bus specifications
Interface ports Serial RS485, uninsulated
Voltage interface 24 V DC – 0.5 A
Bus protocol -
Modbus slave functionality is available No
General information
Voltage supply 10 to 30 V DC
Current consumption 285 mA DC @ 24 V DC
Backup power Internal maintenance-free supercap capacitor
Operating / storage temperature -20 °C to +50 °C / -20 °C to +70 °C
Max. relative humidity 80 %, non-condensing
DIN VDE specifications Low Voltage Directive (LVD) 2014/35/EU, in compliance with EN 50178
Electromagnetic properties Directive 2014/30/EU, in compliance with EN 55011 and EN 61326-1
Frequency spectrum RED 2014/53/EU
Wire cross-section / Stripping length 0.2 ... 2.5 mm² screw terminal connection / 6 mm
Mounting / Installation position DIN rail TS35 or direct mounting / arbitrary
Material / Flammability class Housing: Noryl; terminals: polyamide 6.6 / UL94 V-0
Protection class (DIN 40050) IP 20
Accessories
Antenna GSM GSM-ANTENNA-90°
Cat. no.Qty. 16379.21
GPS antenna GSM-ANTENNA-GPS-3M-K
Cat. no.Qty. 16380.21
External combi-antenna GSM + GPS GSM-ANTENNA-EXTERNAL-GSM+GPS-SMA-3M
Cat. no.Qty. 16381.21
External GSM antenna GSM-ANTENNA-EXTERNAL-SMA-3M
Cat. no.Qty. 16061.21
External GSM antenna GSM-ANTENNA-EXTERNAL-SMA-5M
Cat. no.Qty. 16172.21
External GSM antenna GSM-ANTENNA-EXTERNAL-SMA-10M
Cat. no.Qty. 16173.21
Programming cable GSM-USB-MICRO-cable
Cat. no.Qty. 16382.21

11
GSM-PRO2

GSM-PRO2-4G-EU GSM-PRO2-4G-US
Circuit diagram

Dimensions (L x W x H) TS 35 / direct mount, mm 95 x 36 x 67 / 65 (without antenna) 95 x 36 x 67 / 65 (without antenna)
Weight, g 135 135
Type  GSM-PRO2-4G-EU GSM-PRO2-4G-US
Cat. no.Qty. 16454.21 16456.21
Input/output data
2 multi-function (analogue/digital) inputs 0 ... 10 V / 0(4) ...  20 mA /24 V DC (10 ...  30 V DC)
Resolution/accuracy (0 ... 10 V) (0 ... 20 mA) 20 mV / ± (20 mV +0.3 % of the measured value) –  40 μA / ± (40 μA +0.3 % of the measured value)
Input resistance (0 ... 10 V) (0 ... 20 mA) 80 kOhm  /  500 Ohm
Input current (dig. inputs) @10 V: 0.2 mA / @24 V: 0.5 mA / @30 V: 0.6 mA
UI minimum pulse duration 500 ms
Threshold of dig. Inputs Low < 2 V / High > 4 V
Counter, digital input (pull-down) 1000 pulses/sec. Max. pull-down resistance: 24 kOhm
Pull-down voltage source Typ. 10 ... 30 V DC, unregulated, depending on load
Relay output CO universal contact, 250 V ~
Continuous current / Inrush current (resistive load) 5 A / 5 A
Max. switching capacity 1200 VA at 240 V AC, 5 A
Lifespan at resistive load Electrical, at max. load: > 1.5 x 105 switching cycles. Mechanical: > 15 x 106 switching cycles
Max. switching frequency 6 min-1 at continuous current, 1200 min-1 without load
Contact material / Test voltage AgNi / 4 kV
GSM specifications
Frequency bands 2G - GSM/GPRS/EDGE: dual band 900/1800 MHz

3G - UMTS/HSPA+: dual band 900 (BdVIII)/ 3G - UMTS/HSPA+: triple band, 850 (BdV)/
2100 MHz (BdI) AWS (BdIV)/1900 MHz (BdII)
4G - LTE CAT1: Penta band 700 (Bd28)/ 4G - LTE CAT1: Quad band, 700 (Bd12)/ 850 (Bd5)/
800 (Bd20)/900 (Bd8)/1800 (Bd3)/2100 MHz (Bd1) AWS (Bd4)/1900 MHz (Bd2)
SIM card Nano SIM
Antenna 50 Ohm impedance, SMA plug
Bus specifications
Interface ports Serial RS485, uninsulated
Voltage interface 24 V DC – 0.5 A
Bus protocol Modbus RTU
Modbus slave functionality is available Yes (no other expansion modules can be connected)
General information
Voltage supply 10 to 30 V DC
Current consumption 275 mA DC @ 24 V DC
Backup power Internal maintenance-free supercap capacitor
Operating / storage temperature -20 °C to +50 °C / -20 °C to +70 °C
Max. relative humidity 80 %, non-condensing
DIN VDE specifications Low Voltage Directive (LVD) 2014/35/EU, in compliance with EN 50178
Electromagnetic properties Directive 2014/30/EU, in compliance with EN 55011 and EN 61326-1
Frequency spectrum RED 2014/53/EU CFR Title 47 parts 22 and 24
Wire cross-section / Stripping length 0.2 ... 2.5 mm² screw terminal connection / 6 mm
Mounting / Installation position DIN rail TS35 or direct mounting / arbitrary
Material / Flammability class Housing: Noryl; terminals: polyamide 6.6 / UL94 V-0
Protection class (DIN 40050) IP 20
Accessories
Antenna GSM GSM-ANTENNA-4G
Cat. no.Qty. 16450.21
External GSM antenna GSM-ANTENNA-EXTERNAL-4G-3M
Cat. no.Qty. 16451.21
External GSM antenna GSM-ANTENNA-EXTERNAL-4G-5M
Cat. no.Qty. 16452.21
Programming cable GSM-USB-MICRO-cable
Cat. no.Qty. 16382.21

12
 CONTA-ELECTRONICS

GSM-PRO2E-4G-EU GSM-PRO2E-4G-US
Circuit diagram

Dimensions (L x W x H) TS 35 / direct mount, mm 95 x 88 x 67 / 65 (without antenna) 95 x 88 x 67 / 65 (without antenna)
Weight, g 188 188
Type  GSM-PRO2E-4G-EU GSM-PRO2E-4G-US
Cat. no.Qty. 16455.21 16457.21
Input/output data
10 multi-function (analogue/digital) inputs 0 – 10 V / 0 (4) – 20 mA / 24 V DC (10 – 30 V DC)
Resolution/accuracy (0 ... 10 V) (0 ... 20 mA) 20 mV / ± (20 mV 0.3 % of the measured value) –  40 μA / ± (40 μA + 0.3 % of the measured value)
Input resistance (0 ... 10 V) (0 ... 20 mA) 80 kOhm  /  500 Ohm
Input current (dig. inputs) @10 V: 0.2 mA / @24 V: 0.5 mA / @30 V: 0.6 mA
UI minimum pulse duration 500 ms
Threshold of dig. Inputs Low < 2 V / High > 4 V
Counter, digital input (pull-down) 1000 pulses/sec. Max. pull-down resistance: 24 kOhm
Pull-down voltage source Typ. 10 ... 30 V DC, unregulated, depending on load
4 relay outputs CO universal contact, 250 V ~
Continuous current / Inrush current (resistive load) 5 A / 5 A
Max. switching capacity 1200 VA at 240 V AC, 5 A
Lifespan at resistive load Electrical, at max. load: > 1.5 x 105 switching cycles. Mechanical: > 15 x 106 switching cycles
Max. switching frequency 6 min-1 at continuous current, 1200 min-1 without load
Contact material / Test voltage AgNi / 4 kV
GSM specifications
Frequency bands 2G - GSM/GPRS/EDGE: dual band 900/1800 MHz

3G - UMTS/HSPA+: dual band 900 (BdVIII)/ 3G - UMTS/HSPA+: triple band, 850 (BdV)/
2100 MHz (BdI) AWS (BdIV)/1900 MHz (BdII)
4G - LTE CAT1: Penta band 700 (Bd28)/ 4G - LTE CAT1: Quad band, 700 (Bd12)/ 850 (Bd5)/
800 (Bd20)/900 (Bd8)/1800 (Bd3)/2100 MHz (Bd1) AWS (Bd4)/1900 MHz (Bd2)
SIM card Nano SIM
Antenna 50 Ohm impedance, SMA plug
Bus specifications
Interface ports Serial RS485, uninsulated
Voltage interface 24 V DC – 0.5 A
Bus protocol -
Modbus slave functionality is available No
General information
Voltage supply 10 to 30 V DC
Current consumption 285 mA DC @ 24 V DC
Backup power Internal maintenance-free supercap capacitor
Operating / storage temperature -20 °C to +50 °C / -20 °C to +70 °C
Max. relative humidity 80 %, non-condensing
DIN VDE specifications Low Voltage Directive (LVD) 2014/35/EU, in compliance with EN 50178
Electromagnetic properties Directive 2014/30/EU, in compliance with EN 55011 and EN 61326-1
Frequency spectrum RED 2014/53/EU CFR Title 47 parts 22 and 24
Wire cross-section / Stripping length 0.2 ... 2.5 mm² screw terminal connection / 6 mm
Mounting / Installation position DIN rail TS35 or direct mounting / arbitrary
Material / Flammability class Housing: Noryl; terminals: polyamide 6.6 / UL94 V-0
Protection class (DIN 40050) IP 20
Accessories
Antenna GSM GSM-ANTENNA-4G
Cat. no.Qty. 16450.21
External GSM antenna GSM-ANTENNA-EXTERNAL-4G-3M
Cat. no.Qty. 16451.21
External GSM antenna GSM-ANTENNA-EXTERNAL-4G-5M
Cat. no.Qty. 16452.21
Programming cable GSM-USB-MICRO-cable
Cat. no.Qty. 16382.21

13
GSM-PRO2

Digital input module GSM-PRO-10DI Circuit diagram

• 10 digital inputs, 24V
• One LED display per input

Type  GSM-PRO-10DI
Cat. no.Qty. 16375.21

Digital output module GSM-PRO-4DO Circuit diagram

• 4 relay outputs, one CO contact each
• Max. continuous current per relay: 16 A (contact
materials for high inrush currents)
• One yellow LED status display per channel

Type  GSM-PRO-4DO GSM-4DO-12 V DC

Cat. no.Qty. 16378.21 16444.21

Analogue input module GSM-PRO-8AI Circuit diagram

• 8 multi-function analogue inputs:
0 ... 10 V, 0(4) ... 20 mA, NTC, RTD (PT1000 /
NI1000) -40 ... +120 °C
• Custom configuration for each input

Type  GSM-PRO-8AI
Cat. no.Qty. 16377.21

Analogue output module GSM-PRO-4AO Circuit diagram

• 4 analogue outputs, 0 ... 10 V

Type  GSM-PRO-4AO
Cat. no.Qty. 16376.21

Connection module GSM-PRO-CON Circuit diagram

• Modbus connection module for connecting exter-
nal Modbus devices
• Connector module for connecting the power
supply to GSM-PRO expansion modules. This is
required starting with the tenth expansion mod-
ule (max. 2.5 A).

Type  GSM-PRO-CON
Cat. no.Qty. 16458.21

14
 CONTA-ELECTRONICS

Technical documentation

GSM-PRO-CON
GSM-PRO-10DI

GSM-PRO-4DO

GSM-PRO-4DO

GSM-PRO-4AO
GSM-PRO-8AI
12 V DC
Multi-function analogue inputs 0 ... 10 V / 0 (4) ... 20 mA / RTD. Default: RTD input. 8
Input configurable using plug-in resistors
Input resistance (0 ... 10V) Resistance: fixed (200 kOhm) •
Input resistance (0(4) ... 20 mA) Resistor: plug-in (Ri), 250 ohms ±0.1% (resistor is not included)* •
Input resistance (RTD -40 ... +120 °C) Resistor: plug-in (Rt), sensor-dependent ±0.1% (resistor is not included)* •
RTD sensor type PT1000 (IEC6075) Rt: 5k11 ±0.1%, NI1000 (TK5000 Siemens) Rt: 5k11 ±0.1%, •
NTC (10K3A1) Rt: 40K ±0.1% *
Resolution / conversion error (0 ... 10 V) 10 bit / ±(10 mV + 0.3% of measured value) •
Resolution / conversion error (0(4) ... 20 10 bit / ±(20 μA + 0.4% of measured value) •
mA)
Resolution / conversion error (RTD) 14 bit / ±(0.4 °C + 0.5% of measured value) •
Temperature coefficient < 0.02 % °C •
Digital input Active high (connect the supply voltage or VDD(+) from the module to the input) 10

Input voltage 24 V DC (10 ... 30V) •

Threshold of dig. Inputs Low < 3 V / High > 6 V •
Max. frequency 20 Hz •
Min. pulse length 15 ms •
Impedance 58 kOhm •
VDD (+) output Can only be used for the inputs •
LED status display Bi-colour LED per input (green/red/off, programmable) •
Analogue output 0 ... 10 V DC, short-circuit and overvoltage protected (24 V) 4
Load resistance / current per channel > 1 kOhm / < 10 mA •
Resolution / Conversion error 10 bit / ±(30 mV + 0.5 % of measured value) •
Temperature coefficient < 0.02 % °C •
LED status display Yellow LED. Light intensity depends on output value; < 1.5 V = not illuminated •
Relay output 4 4
Contact type 4 x 1 CO • •
Max. switching voltage 250 V~ • •
Continuous current / Inrush current 16 A / 80 A (20 ms) • •
(resistive load)
Max. module current (all relays) 32 A • •
Max. switching capacity 4000 VA • •
Electrical lifespan at nominal / 2 A load 1 x 105 / 7 x 105 switching operations @ 23 °C and resistive load • •
Mechanical lifespan 30 x 105 switching operations • •
Max. switching frequency 6 min-1 at continuous current, 1200 min-1 without load • •
Contact material AgSnO2 • •
Test voltage coil - contact 5 kV • •
LED status display Yellow • •
Bus specifications
Interface ports Serial RS485, uninsulated • • • • • •
Max. cable length 500 m • • • • • •
Terminating resistor Integrated terminating resistor is activated by jumper (default: off) • • • • • •
Protective circuitry Integrated transient protection • • • • • •
Bus connection Integrated plug-in connector (modules mounted without clearance, no wiring • • • • • •
required)
Connection type Shielded twisted-pair cable • • • • • •
General information
LED status display (two colours) Run - no communication - Error • • • • •
Voltage supply 20…28 V DC (Power at bus plug: 5 A max.) • • •
Voltage supply 10...30 V DC (power at bus connector: 5 A max) •
Voltage supply 10.8...12.2 V DC (power at bus plug: 5 A max) •
Current consumption, DC ... mA typical @ 24 VDC (with all outputs active @ full load) 30 100 100 50 57
Operating / storage temperature 0 °C to +50 °C / –20 °C to +70 °C • • • • • •
Relative humidity max. 90 %, non-condensing • • • • • •
The CE label Low Voltage Directive (LVD) 2014/35/EU, in compliance with EN 50178 • • • • • •
EMC Directive 2014/30/EU, in compliance with EN 55011 and EN 61326-1 • • • • • •
Connection cross-section / Stripping 0.2 ... 2.5 mm² screw connection / 6 mm • • • • • •
length
Mounting / Installation position DIN rail TS35 or direct mounting, as desired • • • • • •
Dimensions (L x W x H) ... x 95 x 60 mm 53 53 53 53 36 36
Insulating material / Flammability class Housing and I/O terminals: polycarbonate; Bus connector: Polyamide 6.6 / UL94 • • • • • •
V-0
Construction Can be installed in rows without gap • • • • • •
Protection class (DIN 40050) IP 20 • • • • • •
Weight, g 121 154 154 117 86 64

* Plug-in resistors Ri and Rt are available on request

15
GSM-PRO2

GSM-PRO Antenna 2G/3G

GSM antenna GSM-ANTENNA-90° GSM-ANTENNA-EXTERNAL-SMA-3M

Weight, g 8 81
Type  GSM-ANTENNA-90° GSM-ANTENNA-EXTERNAL-SMA-3M
Cat. no.Qty. 16379.21 16061.21
General information
Frequency GSM 800, 850, 900, 1900 and 2100 MHz 900, 1800, 2100 MHz
Frequency GPS
Antenna type GPS
Max. gain 1.0 dBi (824 ... 960 MHz) 1 dBi
2.0 dBi (1710 ... 1990 MHz)
2.5 dBi (1920 ... 2170 MHz)
Impedance 50 Ohm 50 Ohm
Connection type SMA male SMA male
Cable length 3 meters
Bore hole 17 mm
Antenna diameter 8 mm 45 mm
Antenna height 41 mm 17 mm
Total height 49.5 mm 39.5 mm
Temperature range -40 °C  ... +75 °C -40 °C  ... +85 °C
Material of antenna housing PC + PBT Nylon 6
Mounting type Screw Screw
Antenna shape Stubby Puck

GSM antenna GSM-ANTENNA-EXTERNAL-SMA-5M GSM-ANTENNA-EXTERNAL-SMA-10M

Weight, g 280 480

Type  GSM-ANTENNA-EXTERNAL-SMA-5M GSM-ANTENNA-EXTERNAL-SMA-10M
Cat. no.Qty. 16172.21 16173.21
General information
Frequency GSM 800, 850, 900, 1900 and 2100 MHz 800, 850, 900, 1900 and 2100 MHz
Frequency GPS - -
Antenna type GPS
Max. gain 1 dBi 1 dBi

Impedance 50 Ohm 50 Ohm

Connection type SMA male SMA male
Cable length 5 meters 10 meters
Bore hole 17 mm 17 mm
Antenna diameter 80.0 mm 80.0 mm
Antenna height 23.0 mm 23.0 mm
Total height 45.0 mm 45.0 mm
Temperature range -40 °C...+85 °C -40 °C...+85 °C
Material of antenna housing Nylon 6 Nylon 6
Mounting type Screw Screw
Antenna shape Puck Puck

16
 CONTA-ELECTRONICS

GPS / GSM antenna GSM-ANTENNA-GPS-3M-K GSM-ANTENNA-EXTERNAL-GSM+GPS

Weight, g 53 158
Type  GSM-ANTENNA-GPS-3M-K GSM-ANTENNA-EXTERNAL-GSM+GPS-SMA-3M
Cat. no.Qty. 16380.21 16381.21
General information
Frequency GSM 800, 850, 900, 1900 and 2100 MHz
Frequency GPS 1575.42 ±1 MHz 1575.42 ±1 MHz
Antenna type GPS Active (power supply 2.5 ... 5 V DC) Active (power supply 2.5 ... 5 V DC)
Max. gain GSM/GPS - / 2 dBic 1 dBi / 2 dBic

Impedance 50 Ohm 50 Ohm

Connection type SMA male two SMA male
Cable length 3 meters 3 meters
Bore hole 13 mm
Antenna diameter 40.5 x 50.8 mm 81.3 mm
Antenna height 16.8 mm 14.6 mm
Total height 16.8 mm 29.6 mm
Temperature range -40 °C...+85 °C -40 °C...+85 °C
Material of antenna housing ABS ABS
Mounting type Magnetic Screw
Antenna shape Puck Puck

17
GSM-PRO2

GSM-PRO Antenna 4G / LTE

GSM antenna GSM-ANTENNA-4G

Weight, g 9
Type  GSM-ANTENNA-4G
Cat. no.Qty. 16450.21
General information
Frequency GSM 800, 850, 900 – 1700, 1800, 1900, 2100 – 2600 MHz
Frequency GPS
Antenna type GPS
Max. gain 0.1 dBi (689 ... 960 MHz)
2.9 dBi (1710 ... 2170 MHz)
4.6 dBi (2500 ... 2700 MHz)
Impedance 50 Ohm
Connection type SMA male
Cable length
Bore hole
Antenna diameter 10 mm
Antenna height 49 mm
Total height 71 mm
Temperature range -20 °C...+65 °C
Material of antenna housing POM
Mounting type Screw
Antenna shape Stubby

GSM antenna GSM-ANTENNA-EXTERNAL-4G-3M GSM-ANTENNA-EXTERNAL-4G-5M

Weight, g 122 198

Type  GSM-ANTENNA-EXTERNAL-4G-3M GSM-ANTENNA-EXTERNAL-4G-5M
Cat. no.Qty. 16451.21 16452.21
General information
Frequency GSM 689 – 960/1710 – 2690 MHz 689 – 960/1710 – 2690 MHz
Frequency GPS
Antenna type GPS
Max. gain 2.5 dBi 2.5 dBi

Impedance 50 Ohm 50 Ohm

Connection type SMA male SMA male
Cable length 3 meters 5 meters
Bore hole 13 mm 13 mm
Antenna diameter 81.3 mm 81.3 mm
Antenna height 14.6 mm 14.6 mm
Total height 29.6 mm 29.6 mm
Temperature range -40 °C...+85 °C -40 °C...+85 °C
Material of antenna housing ABS ABS
Mounting type Screw Screw
Antenna shape Puck Puck

18
 CONTA-ELECTRONICS

Notes

19
 Otto-Hahn-Str. 7 Phone +49 (0) 5257 9833-0 [email protected]
D-33161 Hövelhof, Fax +49 (0) 5257 9833-33 www.conta-clip.com
Germany

CON
CON TA -
inals
PCB term
tors
and connec
KDS CABLE MANAGEMENT SYSTEMS
10

KDS Cable entries,

Catalogue

KES Cable entries,

SAB/SSAB/SABK Shielding solutions
08 Catalogue

Our products for your challenges:

01 CONTA-CONNECT
Terminal blocks
with Push-in connection system
Cat. no. 98070.2

02 CONTA-CONNECT
Terminal blocks with screw connection
system and special terminals
Cat. no. 98071.2

03 CONTA-CONNECT
Terminal blocks
with tension-spring connection
Cat. no. 98072.2

04 CONTA-CONNECT
Installation materials and
other accessories for terminal blocks
Cat. no. 98073.2

05 CONTA-LABEL
Marking components
for thermal-transfer marking systems
Cat. no. 98074.2

06 CONTA-LABEL
Marking components
for ink-based marking systems
Cat. no. 98075.2

07 CONTA-BOX
Housings
Cat. no. 98076.1

08 KDS Cable management systems

KDS cable entries,
KES cable entries,
SAB/SSAB/SABK shielding solutions
Cat. no. 98077.2

09 CONTA-ELECTRONICS
Electrical and electronic cabinet components
Cat. no. 98078.2

10 CONTA-CON
PCB terminals and connectors
Cat. no. 98079.2

D 03|19 All rights reserved. Cat. no. 98199.2