INTERACTIVE SCHEMATIC

Bookmarks X

Options

Features
This document is best viewed at a
Cover Page screen resolution of 1024 X 768.
Information To set your screen resolution do the following:
Component Table
Tap Table
RIGHT CLICK on the DESKTOP.
Fluid Power Symbols Select PROPERTIES.
Electrical Symbols CLICK the SETTINGS TAB.
Schematic
MOVE THE SLIDER under SCREEN RESOLUTION
Machine Views
Front Frame
until it shows 1024 X 768.
Rear Frame CLICK OK to apply the resolution.
Tap Views

The Bookmarks panel will allow you to

quickly navigate to points of interest.

EC-C2 E-C60
EC-C3

E-C61

Click on any text that is BLUE and underlined.

These are hyperlinks that can be used to navi-
gate the schematic and machine views.

EC-C1

When only one callout is showing on a machine view this

VIEW ALL CALLOUTS button will make all of the callouts visible. This button is
located in the top right corner of every machine view page.

HOTKEYS (Keyboard Shortcuts)

FUNCTION KEYS
Zoom In “CTRL” / “+”
Zoom Out “CTRL” / “-”
Fit to Page “CTRL” / “0” (zero)
Hand Tool “SPACEBAR” (hold down)
Find “CTRL” / “F”
 KENR8913-06
May 2014

D6T and D6T OEM Track-Type Tractor

Hydraulic System
KSB1-UP
ZJB1-UP
JZC1-UP
DTD1-UP
EJJ1-UP
SLJ1-UP
GMK1-UP
RRK1-UP
TSM1-UP
WLM1-UP
PLR1-UP
JRW1-UP
RCW1-UP

© 2014 Caterpillar, All Rights Reserved Printed in U.S.A.

COMPONENT LOCATION

Part Machine Schematic

Description
Number Location Location
Accumulator Gp - Pilot Oil 200-0750 1 C-2
Core As - Oil Cooler (Hydraulic) 321-7949 2 C-1
Cylinder Gp - Blade Angle 344-5133 3 E-8
Cylinder Gp - Blade Lift (XL/XW) 349-6046
4 F-8
(LGP) 349-6044
Cylinder Gp - Blade Tilt (Tilt) 233-9134
5 D-8
(Angle Tilt) 227-0841
Cylinder Gp - Ripper Lift 325-5723 6 C-8
Filter Gp - Oil (Implement Pilot) 334-5261 7 C-3
Filter Gp - Oil (Steering) 177-6979 8 E-3
Manifold Gp - Control (Implement Pilot Pressure) 226-4751 9 C-2
Manifold Gp - Control (Load Sense) 325-1699 10 B-2
Manifold Gp - Control (Low Fan Speed) 388-5493 11 D-1
Manifold Gp - Valve (Ripper Lower) 369-2637 12 B-8
Motor Gp - Piston (Hydraulic Fan) 340-2123 13 D-1
Motor Gp - Piston (Reversing Fan) 340-2124 14 F-1
Motor Gp - Steering 325-9776 15 F-4
Pump Gp - Piston (Hydraulic Fan) 325-9774 16 D-2
Pump Gp - Piston (Implement) 325-9786 17 D-2
Pump Gp - Steering and Charge 325-9773 18 F-3
Sensor Gp - Pressure (Implement Pump) 296-5270 19 C-2
Sensor Gp - Temperature (Hydraulic Oil) 234-5013 20 B-3
Switch Gp - Pressure (Oil Filter Bypass) 253-2673 21 E-2
Tank and Filter Gp - Hydraulic 330-6806 22 A-3
Valve As - Cooler Bypass 4E-1437 23 E-1
Valve Gp - Bank 2 (Blade) 327-0858 24 D-3
Valve Gp - Bank 3 (Blade, Ripper) 334-8698 25 F-6
Valve Gp - Bank 3 (VPAT Blade) 325-0387 26 F-5
Valve Gp - Bank 4 (VPAT Blade, Ripper) 326-9285 27 C-7
Valve Gp - Bank 4 (Blade, Aux.) 335-5276 28 C-5
Valve Gp - Breaker Relief 191-5439 29 B-3
Valve Gp - Counterbalance (Ripper) 346-0493 30 B-8
Valve Gp - Diverter (Rear) 180-8569 31 A-8
Valve Gp - Fan Reversing 162-2191 32 F-2
Valve Gp - Quick Drop 336-7287 33 F-8
Valve Gp - Relief (Steering lines) 198-9219 34 E-3
Check Part Numbers in the Parts Manuals for your Specific Machine
TAP LOCATION

Tap Schematic
Description
Number Location
CPG Accumulator Pressure C-2
K Charge Filter Inlet Pressure E-3
H Charge Filter Outlet Pressure E-3
HA Implement Pump - Discharge C-2
HB Implement Pump - Signal E-4
CP Pilot Valve Supply C-2
SOS Oil Sampling Port C-2
HPCD Impl Pump - Case Return (Backfill) D-2
HFPD Hydraulic Fan Pump Discharge D-2
FC Fan Motor - Case Return (Backfill) D-1
HFCD Reversing Fan Motor - Case Return (Backfill) F-1
HC Left Steer Loop - At Motor F-4
HD Right Steer Loop - At Motor F-4
D-4
F-7
HPDL Hyd. Pilot Press. - Blade Lower C-7
F-5
C-5
D-3
F-6
HPDR Hyd. Pilot Press. - Blade Raise C-6
F-5
C-5
D-3
E-6
HPTL Hyd. Pilot Press. - Tilt Left C-6
E-5
B-5
D-4
E-7
HPTR Hyd. Pilot Press. - Tilt Right C-7
E-5
B-5
B-7
HPAR Hyd. Pilot Press. - Angle Right
D-5
B-6
HPAL Hyd. Pilot Press. - Angle Left
D-5
HPRR Hyd. Pilot Press. - Ripper Raise A-7
HPRL Hyd. Pilot Press. - Ripper Lower A-6
HPA1 Hyd. Pilot Press. - Aux 1 A-5
HPA2 Hyd. Pilot Press. - Aux 2 A-5
HPA3 Hyd. Pilot Press. - Aux 3 A-5
HPA4 Hyd. Pilot Press. - Aux 4 A-5
FLUID POWER SYMBOLS
BASIC COMPONENT SYMBOLS

MAIN AUX.
PUMP: VARIABLE and
PUMP or MOTOR FLUID CONDITIONER SPRING CONTROL VALVES RESTRICTION LINE RESTRICTION 2-SECTION PUMP PRESSURE COMPENSATED
(FIXED)

VARIABILITY SPRING LINE RESTRICTION PRESSURE HYDRAULIC PNEUMATIC LINE RESTRICTION ATTACHMENT
(ADJUSTABLE) (VARIABLE) COMPENSATION ENERGY TRIANGLES VARIABLE and PRESSURE
COMPENSATED

VALVE ENVELOPES
VALVES
VALVE PORTS

ONE POSITION TWO POSITION THREE POSITION TWO-WAY THREE-WAY FOUR-WAY

CONTROL VALVES CHECK VALVES

AB AB

P T P T
BASIC SPRING SHUTTLE PILOT
NORMAL POSITION SHIFTED POSITION INFINITE POSITION
SYMBOL LOADED CONTROLLED

FLUID STORAGE RESERVOIRS

VENTED PRESSURIZED RETURN ABOVE FLUID LEVEL RETURN BELOW FLUID LEVEL

MEASUREMENT ROTATING SHAFTS

PRESSURE TEMPERATURE FLOW UNIDIRECTIONAL BIDIRECTIONAL

COMBINATION CONTROLS

SOLENOID SOLENOID SOLENOID SOLENOID and SERVO THERMAL DETENT

or MANUAL and PILOT PILOT or MANUAL

MANUAL CONTROL SYMBOLS

PUSH-PULL LEVER MANUAL SHUTOFF GENERAL MANUAL PUSH BUTTON PEDAL SPRING

RELEASED PRESSURE PILOT CONTROL SYMBOLS

REMOTE SUPPLY PRESSURE

EXTERNAL RETURN INTERNAL RETURN SIMPLIFIED COMPLETE INTERNAL

SUPPLY PRESSURE

ACCUMULATORS CROSSING AND JOINING LINES HYDRAULIC AND PNEUMATIC CYLINDERS

SPRING LOADED GAS CHARGED LINES CROSSING LINES JOINING SINGLE ACTING DOUBLE ACTING

HYDRAULIC PUMPS HYDRAULIC MOTORS INTERNAL PASSAGEWAYS

FIXED VARIABLE DISPLACEMENT FIXED VARIABLE DISPLACEMENT INFINITE THREE TWO

DISPLACEMENT NON-COMPENSATED DISPLACEMENT NON-COMPENSATED POSITIONING POSITION POSITION

UNIDIRECTIONAL UNIDIRECTIONAL

FLOW IN ONE PARALLEL CROSS FLOW ALLOWED IN

BIDIRECTIONAL BIDIRECTIONAL DIRECTION FLOW FLOW EITHER DIRECTION
ELECTRICAL SYMBOLS
Hydraulic Symbols (Electrical)

G M
Transducer Transducer Generator Electric Motor
(Fluid) (Gas / Air)

Pressure Switch Pressure Switch Temperature Switch Electrical Wire

(Adjustable)

Electrical Symbols (Electrical)

Pressure Temperature Level Flow

Symbol Symbol Symbol Symbol

Wire Number Identification Codes

Electrical Schematic Example Hydraulic Schematic Example

Current Standard Current Standard

Harness identification code
This example indicates
wire 135 in harness "AG". Wire
Circuit Number Wire Color
Identification

325-AG135 PK-14
325-PK
Circuit Identification Wire Color Wire Gauge
Number

Previous Standard
Wire Color
Wire

325-PK-14
B A
Circuit Number Wire Gauge
Identification (EXAMPLE VALVE)
 8 7 6 5 4 3 2 1

PBS2 PBS2
(4) CYLINDER GP HB HB PS IR
BLADE LIFT PS IR
349-6046 (XL/XW) PS (15) MOTOR GP (18) PUMP GP
IR (32) VALVE GP
349-6044 (LGP) HD
STEERING STEERING AND CHARGE
325-9773 FAN REVERSING
PS IR 325-9776
MA X2 X1 162-2191
(26) VALVE GP
F BANK 3 P F
(25) VALVE GP BLADE LIFT (VPAT BLADE) HFCD
BANK 3 325-0387
BLADE LIFT
(BLADE, RIPPER)
334-8698 TO RETURN
MANIFOLD

HPDR
HPDL

(33) VALVE GP HPDR STEERING

HPDL
BLL
QUICK DROP HC
MB E PS

336-7287 BLL BLR

(14) MOTOR GP
BLR TILT
TO RETURN
PISTON
MANIFOLD T T2
BLADE TILT
TO RETURN (REVERSING FAN)
MANIFOLD
340-2124
FAN REVERSING VALVE OPTION
BLR BLL (34) VALVE GP H
RELIEF
HPTL HPTR
HPTL
(STEERING LINES)
BLADE LIFT CYLINDERS
HPTR
198-9219
BTR BTR
BTL BTL
E E
RIPPER LIFT
)( )( PBS2 (8) FILTER GP
(3) CYLINDER GP
OIL K
BLADE ANGLE (16) PUMP GP
HB (STEERING)
344-5133 PISTON
PS 177-6979 (21) SWITCH GP
RIGHT LEFT
HPRR IR (HYDRAULIC FAN)
PRESSURE
HPRL
(OIL FILTER BYPASS) 325-9774 (23) VALVE AS
RR ANGLE
PS IR 253-2673 COOLER BYPASS
RL X 4E-1437
ID PBS

ID PBS1 PO
(24) VALVE GP
BANK 2
HPAR HPAL
(BLADE)
3 BANK VALVE GROUP - BLADE LIFT/TILT, RIPPER LIFT (S-BLADE W/RIPPER)
AR
BLADE LIFT 327-0858 (13) MOTOR GP
AR AL PISTON FC
AL (17) PUMP GP
PISTON
HPCD (HYDRAULIC FAN)
BLADE ANGLE CYLINDERS 340-2123 TO RETURN
)( )( (IMPLEMENT) HFPD
(P)
MANIFOLD

PBS2 325-9786 (C1)

B MB
HB
PS IR HPDL HPDR

D (5) CYLINDER GP FAN D

BLADE TILT PS IR
233-9134 (TILT) ID PBS
227-0841 (ANGLE TILT) ID PBS1 PO
TILT RIGHT BLADE TILT

3 BANK VALVE GROUP - BLADE LIFT/TILT, BLADE ANGLE (VPAT BLADE) (11) MANIFOLD GP
BLR BLL (C2)
CONTROL
(LOW FAN SPEED)
PBS2 IMPLEMENT (T)
BLADE LIFT
S L1 L 388-5493
HB PS IR
TILT LEFT
PS IR HPTR HPTL
PBS2 TO RETURN
MANIFOLD

BTR BTL
PS
(28) VALVE GP ID PBS (19) SENSOR GP
HPDL BANK 4 PBS1 PRESSURE (2) CORE AS
PO
HPDR

(BLADE, AUX.) (1) ACCUMULATOR GP (IMPLEMENT PUMP) OIL COOLER

ID 296-5270
BLADE TILT CYLINDER BLL 335-5276 BLADE LIFT BTL BTR PILOT OIL (HYDRAULIC)
BLR 200-0750 321-7949
CPG
BLADE TILT 2 BANK VALVE GROUP - BLADE LIFT/TILT
(S-BLADE)
(7) FILTER GP
OIL HA
C SOS C
(6) CYLINDER GP (IMPLEMENT PILOT)
RIPPER LIFT 334-5261 CP ACC
(9) MANIFOLD GP
325-5723 HPDL HPDR CONTROL
(IMPLEMENT PILOT PRESSURE)
HPTR HPTL
BLL PO CP 226-4751
BLR
BTR BLADE TILT
T
BTL
IR

(12) MANIFOLD GP (27) VALVE GP

VALVE BANK 4
369-2637 (VPAT BLADE, RIPPER)
326-9285 HPTR HPTL

(10) MANIFOLD GP
TO RETURN BTR CONTROL
MANIFOLD BLADE ANGLE
BTL (29) VALVE GP LOAD SENSE BOOST/ 325-1699
BREAKER RELIEF RETURN MANIFOLD

RAISE 191-5439 LSB

RR )( )( IMPL PUMP/FAN PUMP CD
FAN MOTOR CD
STRG MOTOR CD
B STRG PUMP CD B
LOAD SENSE BOOST DRAIN (INTERNAL)
RIPPER ANTI-DRIFT VALVE ATTACHMENT DRAIN

LOWER HPAR HPAL

RL
(30) VALVE GP AR AUX 1
COUNTERBALANCE AL
346-0493 (20) SENSOR GP PBS1
TEMPERATURE
(HYDRAULIC OIL)
RIPPER LIFT CYLINDER 234-5013

HPA1 HPA2 (22) TANK AND FILTER GP

HYDRAULIC
PT3
PORT 1 330-6806 LINE PATTERNS
RIPPER LIFT PORT 2
T PT4
Pressure Line
AUX 2 Pilot / Load Sensing Pressure
HYDRAULIC CIRCUIT COLOR DESCRIPTIONS
PILOT OIL Drain / Return Lines
IMPLEMENT PUMP OUTPUT
BLADE LIFT CYLINDER CONTROL CIRCUIT Component Group
RIPPER LIFT CYLINDER CONTROL CIRCUIT
SUPPLY LINE Attachment
(31) VALVE GP HPRL
AUX 1 AND AUX 2 CIRCUITS
A HPRR
LOAD SENSING Air Line A
DIVERTER
LSB HPA4
FAN PUMP OUTPUT
(REAR) RR
HPA3
DRAIN / RETURN LINE CALLOUTS
BLADE ANGLE CYLINDER CONTROL CIRCUIT
180-8569 RL PT3 STEERING AND CHARGE PUMP CIRCUIT YY Taps (Pressure, Sampling, Sensor - by letter)
PORT 3
PORT 4

BLADE TILT CYLINDER CONTROL CIRCUIT

ID PBS
PT4
ID PBS THIS SCHEMATIC IS FOR THE D6T AND D6T OEM TRACK-TYPE TRACTOR HYDRAULIC SYSTEM
PORT 5
PORT 6

ID PBS1 PO
MEDIA NUMBER: KENR8913-06
ID PBS1 PO
SCHEMATIC PART NUMBER: 325-0100, CHANGE: 02, VERSION: -
Components are shown installed on a fully operable machine with the key and engine off, transmission shifter
REAR AUX. DIVERTER VALVE 4 BANK VALVE GROUP - BLADE LIFT/TILT, BLADE ANGLE, RIPPER LIFT (VPAT-BLADE W/RIPPER) in neutral and with parking brake set.
4 BANK VALVE GROUP - BLADE LIFT/TILT, AUX 1, AUX 2
Refer to the appropriate Service Manual for Troubleshooting, Specifications and Systems Operations.
(S-BLADE W/REAR AUXILIARY HYDRAULICS)
Note: Refer to the Parts Manual using a specific serial number prefix in SIS before ordering parts from this schematic.

8 7 6 5 4 3 2 1
MACHINE COMPONENT LOCATION
VIEW ALL CALLOUTS

1 9 25 26
24 27 H 21
HA 19 28
SOS
29 31 8
CP
22 K
10
20

HB HC
CPG
7
34 HD
33
15
2 30
HFPD 4
FC 3
16
17
HFCD
6
HPCD

13
18
14 23
32
11
12 5
FOUR BANK VALVE
VIEW ALL CALLOUTS

HPA4
HPRR

HPRL
HPA3
HPA2

HPAR
HPAL

HPA1

HPTL

HPTR

HPDL
HPDR
TWO BANK VALVE
VIEW ALL CALLOUTS

HPTR

HPTL

HPDL

HPDR