7.
Level 2 Repair
7-1. Components on the Rear Case
SPK TR VT CAM SPK TL
Main Cam
SIDE/MAIN
SUB/MAI
FPCB
N FPCB
Battery
SIM
Socker
SIDE PBA
SUB PBA SPK BL
SPK BR
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
7-2. Pre-requisite
Tweezers / Disass'y Stick / Screw Driver Anti-static Gloves
Anti-static Mat Hot Plate
A OCTA Disassembly Holder OCTA Disassembly Upper
Ethyl Alcohol Cotton Swab
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
7-3. Parts which must be changed after repair
BOM Description & part code Image Remarks
A/S REWORK KIT-SM-T725, It needs all when
OCTA TAPE KIT
the OCTA is
[GH82-19789A] removed/replaced
A/S REWORK KIT-SM-T725, It needs all when
PBA TAPE KIT,SVC
the PBA is
[GH82-19790A] removed/replace.
It needs all when
A/S REWORK KIT-SM-T725,
R-SPK KIT, SVC the R-SPK is
removed/replaced
[GH82-19791A]
.
It needs all when
A/S REWORK KIT-SM-T725,
L-SPK KIT,SVC the L-SPK is
removed/replaced
[GH82-19792A]
.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
7-4. Disassembly
1 Put the device in the chamber for 75℃, 2 1) Detach the LCD using Vaccum JIG.
15±5 minutes 2) Disconnect the LCD FPCB ZIP Connector.
※ Caution ※ Caution
Check battery soc below 68% Be care of scratch
3 Detach SIM Tray. 4 Unscrew Rear 38points.
※ Caution ※ Caution
Be care of scratch Be careful not to damage the Battery
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
5 Detach LCD conn Cap and LCD FPCB. 6 Detach the rear.
※ Caution ※ Caution
Be care of scratch Be careful to damage of Bracket Assy.
7 Disarm the battery connector and disconnect the 8 1) Disarm the SUB/MAIN FPCB connector and
other connector 5 point and 3 coaxial cables. Detach it completely.
(Main Cam, 4 Speakers) 2) Disarm the SIDE/MAIN FPCB connector and
Detach it completely.
※ Caution
※ Caution
1) Don’t use sharp tool.
1) Don’t use sharp tool.
2) Be care of connector damage
2) Be care of connector damage
3) Disassemble the battery connector for the first time.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
9 Unscrew PBA 1points. 10 Detach Main PBA
※ Caution
※ Caution
1) Be careful not to damage the PBA
Be careful not to damage the PBA
2) Be care of several kinds of damage
11 Detach other components.
(Side/Sub PBA, 4 SPKs)
SPK TR SPK TL
SIDE
PBA
SUB
PBA
SPK SPK BL
BR
※ Caution
1) Don’t use sharp tool.
2) Be care of scratch
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
7-5. Assembly
1 Attach components on Bracket Assy.
2 Assemble PBA Assy In Bracket Assy.
(Side/Sub PBA, 4 SPKs) (PBA + Bracket Assy)
SPK TR SPK TL
SIDE
PBA
SUB
PBA
SPK SPK BL
BR
※ Caution ※ Caution
Be care of FPCB damage and tilt Be care of damage and tilt
3 Assemble the Screw PBA 1points. 4 Assemble SIDE/MAIN FPCB and SUB/MAIN
FPCB
※ Caution
※ Caution
1) Don’t use sharp tool.
Be careful not to damage the PBA
2) Be care of connector damage
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
5 Assemble the Main Cam, 4 Speakers, 3 Coaxial 6 Assemble Rear.
Cables, Battery
※ Caution
※ Caution
1) Don’t use sharp tool.
Be care of scratch and REAR damage
2) Be care of connector damage
7 Assemble LCD FPCB and LCD conn CAP. 8 Assemble the Screw Rear 38points.
※ Caution ※ Caution
1) Don’t use sharp tool. 1) Be care of scratch and REAR damage
2) Be care of connector damage 2) Be careful not to damage the Battery
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair
9 1) Assemble the LCD FPCB connector And LCD 10 Press LCD
Assy.
2) Attach the LCD to the Bracket ass’y
※ Caution
※ Caution
1) Don’t use sharp tool.
Be care of scratch and tilt.
2) Be care of connector damage
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
