Graco RAC X SwitchTips Order Graco RAC X LTX tips
The blue RAC X Switch tips are designed for spraying latex paint in residential,
commercial or industrial applications and are original equipment on new Graco Contractor
series sprayers. This versatile tip will spray lacquers to mastics and are the highest
performing, longest lasting airless pray tips in the industry. With a RAC X Guard they can
be used on virtually all modern airless sprayers with a 7/8" threaded gun.
LTX and tip size - LTXxxx such as LTX517
Orifice size - inches (thousandths)
Fan Size .007 .009 .011 .013 .015 .017 .019 .021 .023 .025 .027 .029 .031 .033 .035 .055
2-4 109 111 115
4-6 207 209 211 213 215 217 219 221 231 235
6-8 309 311 313 315 317 319 321 323 325 327 329 331 335
8-10 409 411 413 415 417 419 421 423 425 427 429 431 433 435 455
10-12 509 511 513 515 517 519 521 523 525 527 529 531 533 535
12-14 611 613 615 617 619 621 623 625 627 629 631 633 635
14-16 721 723 729
16-18 817 821 827
Flow .09 .12 .18 .24 .31 .38 .47 .57 .67 .77 .90 1.03 1.17 1.31
Rate
(gpm)
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate
Example: for a tip with a .015 orifice and a 6 in (152 mm) pattern, order LTX315
Graco RAC X Fine Finish Order Graco RAC X FineFinish
SwitchTips
The green Fine Finish tips are made for finish work such as cabinetry, woodwork, metal.
designed to be used with lacquers, varnishes, urethanes and other fine-finish materials.
The pre-orifice in these tips produce finer atomization which results in a finer finish.
Requires RAC X HandTite guard.
FFT and tip size - FFTxxx such as FFT412
Orifice size - inches (thousandths)
Fan Size .008 .010 .012 .014
2-4 108 110 112
4-6 208 210 212 214
6-8 308 310 312 314
8-10 410 412 414
10-12 510 512 514
12-14 612 614
Flow Rate (gpm) .07 .11 .15 .21
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate
Example: for a tip with a .010 orifice and a 8 in (203 mm) pattern, order FFT410
Graco WideRAC X SwitchTips Shop Graco WideRAC tips
WideRAC tips are for high production and for use in larger sized airless sprayers. Great
for new construction, large concrete and block surfaces. Sprays an extra wide 24" fan
pattern. Requires RAC X HandTite guard.
WR and tip size - WRxxxx such as WR1225
Orifice size - inches (thousandths)
Fan Size .021 .023 .025 .027 .029 .031 .033 .035 .037 .039
24 1221 1223 1225 1227 1229 1231 1233 1235 1237 1239
Flow Rate (gpm) .47 .572 .77 .90 1.03 1.17 1.31 1.47 1.63 .90
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate
Example: for a tip with a .027 orifice and a 24 in (610 mm) pattern, order WR1227
Graco RAC 5 SwitchTips Order Graco RAC V tips
The black RAC 5 tips come in the widest variety of sizes and are the most common as
they were standard equipment on Graco sprayers for many years. Sizes for spraying
lacquers to mastics and everything in-between. They are the #1 selling airless tip on the
market. Fits RAC 5 Guard (aka RAC V) and RAC IV too.
286 and tip size - 286xxx such as 286415
Orifice size - inches (thousandths)
Fan Size .007 .009 .011 .013 .015 .017 .019 .021 .023 .025 .027 .029 .031 .033 .035
2-4 109 111 113 115 119 121
4-6 207 209 211 213 215 217 219 221 223 225 235
6-8 307 309 311 313 315 317 319 321 323 325 327 331
8-10 409 411 413 415 417 419 421 423 425 427 429 433 435
10-12 509 511 513 515 517 519 521 523 525 527 529 531 533 535
12-14 609 611 613 615 617 619 621 623 625 627 629 631 633 635
14-16 721 723 725 729 735
16-18 815 817 819 821 827 831 833 835
18-20 917 935
Flow Rate .09 .12 .18 .24 .31 .38 .47 .57 .67 .77 .90 1.03 1.17 1.31
(gpm)
Table Continued...
Orifice size - inches (thousandths)
Fan Size .039 .043 .045 .051 .055 .063 .065
2-4
4-6
6-8
8-10 439 443 451 455
10-12 543 555 563
12-14 645 655 665
14-16
16-18
18-20
Flow Rate (gpm) 1.63 1.98 2.17 2.79 3.25 4.26 4.53
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate
Example: for a tip with a .015 orifice and a 6 in (152 mm) pattern, order LTX315
Graco LineLazer RAC 5 SwitchTips Purchase Graco LineLazer tips
These yellow tips are specifically designed for line stripping machines. Creates clean,
laser-sharp lines with no fuzzy edges. Sprays heavy water-based to thin alkyd traffic
paints. Fits the orange RAC5 tip guard.
LL5 and tip size - LL5xxx such as LL5319. Fits RAC 5 Guard (aka RAC V) and RAC IV
too.
Orifice size - inches (thousandths)
Fan Size .013 .015 .017 .019 .021 .023 .025 .027 .029 .031 .033 .035 .039 .055
2 213 215 217 219
4 315 317 319 321 323 325 327 329 331 333 335 355
4-8 417 419 421 423 425 427 429 431 435
8-12 621 623 625 627 629 631 635 639
Flow Rate .18 .24 .31 .38 .47 .57 .67 .77 .90 1.03 1.17 1.31 1.63 3.25
(gpm)
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate
Example: for a tip with a .015 orifice and a 6 in (152 mm) pattern, order LTX315
See LineLazer Tip Selection Guide
Graco Heavy Duty RAC SwitchTips Order Graco XHD tips
These gray handled heavy-duty tips can be used with virtually all paints and coatings -
solvent and water-based. These tips are anchored with a screw in the heavy duty guard,
which prevents tip loss. Use where vibration is a factor, situations where tip loss would be
a problem such as on bridges. Requires the Heavy Duty RAC Tip Guard.
XHD and tip size - XHDxxx such as XHD625
Orifice size - inches (thousandths)
Fan Size .007 .009 .011 .013 .015 .017 .019 .021 .023 .025 .027 .029 .031 .033 .035
2-4 107 109 111 113 115 117 119 121 129
4-6 209 211 213 215 217 219 221 225 227 229 231 235
6-8 307 309 311 313 315 317 319 321 323 325 327 329 331 333 335
8-10 409 411 413 415 417 419 421 423 425 427 429 431 433 435
10-12 509 511 513 515 517 519 521 523 525 527 529 531 533 535
12-14 609 611 613 615 617 619 621 623 625 627 629 631 633 635
14-16 711 713 715 717 719 721 723 725 727 729 731 733 735
16-18 813 815 817 819 821 823 825 827 829 831 833 835
18-20 923 927 931 933 935
Flow .09 .12 .18 .24 .31 .38 .47 .57 .67 .77 .90 1.03 1.17 1.31
Rate
(gpm)
Table Continued...
Orifice size - inches (thousandths)
Fan .037 .039 .041 .043 .045 .047 .049 .051 .053 .055 .057 .059 .061 .063 .065 .067 .069 .071 .075 .081
Size
2-4 139
4-6 239
6-8 337 339 341 343 345 347 349 351 355
8-10 437 439 441 443 445 447 449 451 455 461 463 465 467 471 475 481
10-12 537 539 541 543 545 547 549 551 553 555 557 561 563 565 567 571 575
12-14 637 639 641 643 645 647 649 651 655 657 659 661 663 665 667 669 671 675
14-16 737 739 741 743 747 749 751 753 755 761 763 767 771
16-18 837 839 841 843 847 849 851 855 861 863 867
18-20 937 939
Flow 1.47 1.63 1.8 1.98 2.17 2.37 2.58 2.79 4.26 3.25 3.49 3.75 4.0 4.26 4.53 4.82 5.11 5.41 6.04 7.04
Rate
(gpm)
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate
Example: for a tip with a .015 orifice and a 6 in (152 mm) pattern, order GHD315
Graco RAC IV Reverse-A-Clean Buy Graco RAC IV tips
Tips
RAC IV tips were the first airless tip to stand out from the rest. These are still OEM on the
Magnum series sprayers. These fit the RAC 5 guard and the selection is small, you may
use the RAC 5 tips above.
We now have many of the common sizes in stock, and are currently discounted to $18.95
Fits RAC IV and RAC 5 Guard (aka RAC V) too.
221 and tip size - 221xxx such as 221415
Orifice size - inches (thousandths)
Fan Size .011 .013 .015 .017 .019
6-8 311 313
8-10 411 413 415 417
10-12 515 517 519
12-14 619
Flow Rate (gpm) .12 .18 .24 .31 .38
221xxx (odd)
Example - for a .011 orifice and a 6 inch fan pattern, order tip 221311
Graco Contractor Flat Tips Order Graco Flat tips
Flat tips were the original airless paint sprayer tips but many still use and prefer them. These tips
cost less but are much harder to clean and spray a similar quality fan to RAC V tips. As they are
harder to clean they should be used only with clean, strained and filtered materials and may not be
appropriate when changing of tips is a nuisance such as on a ladder. When using these you
should have several on hand. Fits Flat Tip Guard only.
269 and tip size - 269xxx such as 269515
Orifice size - inches (thousandths)
Fan Size .011 .013 .015 .017 .019 .021 .023 .025 .027 .029 .031 .035
4-6 211 213 215 217 219 225 227
6-8 311 313 315 317 319 321 323 325 327
8-10 411 413 415 417 419 421 423 425 427 435
10-12 511 513 515 517 519 521 523 525 527 531
12-14 613 615 617 619 621 623 625 627 631 635
14-16 715 717 719 721 725
16-18 815 819 821 827 829 831
18-20 925
Flow Rate .12 .18 .24 .31 .38 .47 .57 .67 .74 .90 1.03 1.31
(gpm)
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate
Example: for a tip with a .011 orifice and a 10 in (203 mm) pattern, order 269511
Graco Fine Finish Flat Tips Get Graco Fine-Finish Flat tips
These are a fine-finish version of the spray tips above and are made for finish work such as
cabinetry, woodwork, metal. fits Fine Finish Flat Tip Guard only.
163 and tip size - 163xxx such as 163410
Orifice size - inches (thousandths)
Fan Size .008 .010 .012 .014 .016 .018 .020 .022 .024 .026 .028 .030 .032
2-4 108 110
4-6 208 210 212 214 216 218 224 232
6-8 310 312 314 316 318 320 322 324
8-10 408 410 412 414 416 418 420 424 426 428 430 432
10-12 510 512 514 516 518 520 522 524 526 528 530
12-14 610 612 614 616 618 620 622 624 626 628
14-16 712 714 716 718 726
16-18 814 816 818 820 822 824 826 828 832
18-20 912 914 918 922 924 926
Flow Rate .07 .11 .15 .21 .27 .35 .43 .52 .62 .73 .84 .97 1.1
(gpm)
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate
Example: for a tip with a .010 orifice and a 10 in (203 mm) pattern, order 163510
Our most popular tip sizes based on sales are;
1. 286517
2. 286515
3. FFT310
4. 286411
5. 286413
6. LTX515
7. 286415
8. 286311
9. LTX517
10. FFT410
11. 286211
12. FFT210
13. LTX415
14. FFT312
15. FFT412
