SAL R1a Speed Log
The SAL R1a is an IMO type-approved speed log for
measuring longitudinal speed through water (STW),
based on proven Acoustic Correlation technology.
The speed log is designed to meet requirements
as specified by authorities and ship owners,
with performance exceeding applicable IMO
specifications. Its closed-ended installation is simple
and cost-effective, with no need for a watertight
compartment or piping above the waterline.
f e at u r e s
• High performance due to proven Acoustic Correlation • Safe due to a rugged mechanical design and
technology watertight cable
• Flexible calibration allows highly accurate readings • Closed ended installation means no need for a
throughout the speed range watertight compartment or piping above the waterline
• Easy set-up and calibration from the bridge display • Pressure tested and approved according to PN16 (24
bar, 240 m)
• Easy to install with only a few mechanical parts,
lightweight bottom arrangements, and transducer • Complies with IMO resolution A.824(19)
mounting from inside the hull
• Space saving with compact bottom arrangements
[Link]/commercial
985-11538-001
SPECIFICATIONS
System Performance Data Main Indicator
Working principle: Acoustic correlation SD4-3: Digital speed display
Measuring distance: 130 mm from surface of transducer Total and trip distance counter
Frequencies: 3.8 and 4.2 MHz Dimensions: 144 x 144 x 16 mm
Speed range: ±50 knots sensed speed Weight: 0.6 kg
Speed accuracy: <1% or 0.1 knot, whichever is greater Distance Easy Tank
accuracy: <1% Transducer Dimensions: Ø 168 mm
Minimum water depth: 3 metres below the transducer Height 85 mm
Electronics Unit Transducer Weight including 10 m cable: 5,5 kg
Serial speed output: One, IEC 61162-1 3rd edition (NMEA 0183) (max load Bottom Flange weight steel: 6,2 kg
100 ohm) (equal to 10 SD-indicators) Bottom Flange weight aluminium: 2,1 kg
Analogue speed output: One, 0.1VDC/knot (max load 5 mA) Total Dimensions including transducer: Ø 168 mm
Pulse speed output: Two closing contact relays, potential free 200 p/NM Height 85 mm
(max load 30V/30mA or 15V/100mA) Available for both aluminium and steel hull constructions.
Status output: One power fail switching contact relay Dimensions
Power supply for SD-indicators: Max 3 SD-indicators
Power requirement: consumption: 30 watts nominal 144 mm 35 mm
230/115VAC 50-60 Hz Power (5.66") (1.3")
Environmental requirements: IEC 60945, 4th edition 2002-8
Dimensions: 360 (+30) x 360 x 170 mm
Weight: 10.5 kg 144 mm
Colour: RAL7035 (5.66")
IP class: IP44
16 mm / (0.6")
INSTALL ATION
1: Mount the flange in hull 2: Fasten the transducer to the flange with the bolts 3: Installed
GLOBAL SERVICE
Comes with:
DISTRIBUTED BY
• 2 Year Warranty
• Extended Warranty Options
• Global Service Network
When you choose a product from the Simrad
Commercial product portfolio, you are + Certified Vessels include:
automatically protected by our global Service • 2 Year OnBoard Support
and Support program. Our Service & Support • 24 Hour Replacement
program aims to provide the best possible
experience, even on occasions when support
or replacement is required.
Navico Asia Pacific Tel: +64 9 925 4500 Email: [Link]@[Link]
Navico Americas Tel: +1 832 377 9578 Email: [Link]@[Link]
Navico EMEA Tel: +44 1794 510 010 Email: [Link]@[Link]
