HP DesignJet 800/800PS plotter repair
| HP 800/800PS maintenance service
error codes | Design Jet 800/800PS
repair in Los Angeles, Orange County,
San Bernardino!
Certified HP DesignJet 800 plotter repair as well as 800ps
plotter service with numerical error code failure in Southern
California!
We provide HP Design Jet 800/800ps repair and DesignJet 800 plotter service error code
repairs in Los Angeles, Orange County, San Bernardino.We specialize on repairing most
common Designjet 800.800ps plotter service error code 11:11 trailing cable failure, 21:10
service station failure, 86:01 and carriage belt wear or broken belt, 81:01 error encoder sensor
error, error 79:04, carriage jam error and check paper path error can be worn out carriage belt.
Our Design-Jet 800 service technicians are trained to troubleshoot and replace broken belts,
ink tubing system, purge the ink tubing system, carriage Assembly, trailing cable and replacing
the service station. Laser Printer Services HP 800 plotter repair technicians come prepared to
fix your DesignJet 800, 800ps, 500, 510, 1050, 1055, 4000, 4500, T1100, T1200, T1300,
T610, T770, T790, Z6100, Z6200, Z5200 plotters on the first visit.
We provide out of warranty 800 plotter
repairs in Los Angeles and Orange County!
We provide 800/800ps plotter repair and maintenance service for HP business plotters not covered
under a warranty or maintenance agreement. Does your HP plotter need repair or service? is your HP
plotter out of warranty, If you have HP DesignJet 800 plotter out of contract, out of care pack? Or do
you simply need a design jet 800 repair with numerical error code? Don't worry, you're in the right
place to have your designjet plotter repaired or serviced by knowledgeable HP technicians and original
plotter spare parts.
We stock HP DesignJet 800 24 inch belts
and 42 inch belt kits!
Fast on-site HP DesignJet 800/800ps repair/service in
Southern California!
We keep your design jet 800 plotter printing trouble free with regular service, or if you are having
hardware failures due to network setting or plotter driver. Our HP plotter repair technicians are experts
at troubleshooting and repairing your designjet 800 with a bad hard disks, network cards and broken
belts.
We provide Design Jet 800/800ps plotter repair with broken belt kit replacement on HP 800/800PS
plotter with 42-inch carriage belts for model C7780B, C7780BR, C7780C, C7780CR and Design Jet
800/800PS 24-inch belts for model C7779C, C7779CR, C7779B and C7779BR
TOP 10 HP Design Jet 800/800ps plotter
numerical service error code repairs in
Southern California!
HP Designjet 800 repair as well as 800ps plotter service with
error codes!
System error 02:13 - Carriage failure
System Error 05:10 - Formatter or HPGL/2 Card
failure (Hard Drive Failure)
System Error 11:11 - Bad trailing cable there are two
sizer 24 inch and 42 inch
System Error 21:10 - Bad service station we have it
in stock
System Error 21:11- service Station/Aerosol Fan
cannot be detected
System Error 22:10 - Ink Supply Station failure
System Error 41:10 - Paper axis motor failure
System Error 70:04 - Firmware error, it can be a
hardware failure call (800) 815-2737
System Error 81:01 - Hardware error place a service
call we know it.
System Error 86:01 paper jam error check the
encoder strip, carriage call (800)815-2737
DesignJet plotter repair process includes
troubleshooting, inspecting, cleaning, and
lubricating!
What is included in our HP DesignJet 800 plotter
maintenance service?
Clean HP Design Jet 800/800ps plotter
carriage rails.
Lubricate the carriage rails on DesignJet
800ps Plotter.
Cleaning the HP DJ 800 Drive Roller
Clean and inspect the encoder strip on
eevery HP 800 plotter repair
Inspect and clean the Platen Assembly on
800 plotter .
Clean the entire HP Design Jet 800
plotter.
Calibrate the HP 800 plotter print head
after replacing the belt.
Calibrate the Color after the plotter
service is performed.
Print the Quality test printout on 800
DesignJet plotter .
We specializes on Design-Jet 800 plotter
repair/service in Southern California!
Regular cleaning will prolong the life of your designJet
plotter!
HP Design Jet 800 Plotter Belt Size & Model
Numbers we repair
HP DesignJet 800 (24-inch) Plotter
Repair C7779B, C7779BR
HP DesignJet 800 (42-inch) Plotter
Repair C7779B, C7780B, C7780BR
HP DesignJet 800ps (42-inch) Plotter
Repair C7780C, C7780CR
HP DesignJet 800ps (24-inch) Plotter
Repair C7779C
HP Design Jet 800 repair, 800PS service in
Southern California!
We provide most models of HP DesignJet plotter repair with
error code failures!
HP Design-Jet 800/800ps plotter HP 800/800ps plotter models we
description repair
HP Designjet 800 Plotter Repair
C7779B | C7779BR
(24")
HP Designjet 800 Plotter Repair C7780B | C7780BR | C7780C |
(42-inch) C7780CR
HP Designjet 800PS Repair
C7779C | C7779CR
(24"/A1)
HP Designjet 815 MFP Plotter
Q1279A | Q1279AR
Repair
HP Designjet 800 Plotter Repair
C7779B | C7779BR
(24")
HP Designjet 800 Plotter Repair C7780B | C7780BR | C7780C |
(42-inch) C7780CR
HP Designjet 800PS Plotter Repair
C7779C | C7779CR
(24")
HP Designjet 815 MFP Plotter
Q1279A | Q1279AR
Repair
HP DesignJet 800 plotter repair with
Genuine HP 800 plotter parts in Southern
California!
HP Design Jet Plotter Error Codes Introduction:
System error codes consist of four digits that explain which component or system is failing and what
action should be taken to correct the problem. The information below provides an explanation of the
error and the recommended action to be taken.
Continuable and non-continuable HP DesignJet 800 error
codes
Some error codes are continual, which means that it is possible to press the Enter key on the front panel
and to continue working with the printer. Non-contain
Design Jet 500/800 Error
HP Design Jet 500/800 Plotter Error Codes
Messages
system error 01:10 A problem with the Electronics module has occurred.
The electronics module has detected a connection problem with
System error 01:11
the cooling fan.
System error 01:12 The EEROM is not configured correctly.
System error 01:13 A problem with the Electronics module has occurred.
System error 02:10 A problem has occurred with the carriage assembly
System error 02:13 A problem has occurred with the carriage assembly.
System error 03:10 A problem has occurred with the printers power supply.
System error 04:11 Jet direct network card not detected.
System error 05:09 (DJ
Formatter installed instead of HP-GL/2 accessory card.
500 only)
System error 05:10 (DJ
Formatter card failure, or Formatter card not detected
800 only)
System error 05:10 (DJ
HP-GL/2 accessory card failure
500 only)
System error 06:03 (DJ
Hard disk error
800 only)
System error 08:11 The front panel cannot be detected.
System error 11:11 The trailing cable is poorly connected
System error 11:13 Problem with setting the voltage of the printheads
System error 12:11 A short has been detected in the carriage assembly.
System Error 17:11(DJ
A problem has been detected while initializing.
500 only)
A problem has been detected with the Service Station
System error 21:10
assembly.
A problem has been detected with the Service Station
System error 21:11
assembly.
System error 22:10 A problem has been detected with the Ink Supply Station.
System error 41:10 A problem has been detected with the Paper-Axis motor
An error in the paper-axis motor encoder quadrature has
System error 41:13
occurred.
System error 42:10 A problem has occurred with the Scan-Axis motor.
System error 43:10 A problem has occurred with the Vacuum fan.
System error 43:11 The Vacuum fan is not detected.
System error 55:11 A problem with the line sensor has occurred.
System error 56:10 Drive roller encoder sensor error.
An error in the drive roller encoder sensor quadrature has
System error 56:13
occurred.
System error 61:04 Firmware error.
System error 61:05 The printer was not able to process a job that was sent.
System error 62:03 Parallel port communication problem
System error 63:03 LAN card communication problem.
System error 64:03 USB port communication problem.
System error 64:04 Firmware error (USB port).
System error 65:03 Generic input/output port communication problem.
System error 71:04 Problem allocating memory.
System error 71:06 Out of memory problem.
System error 72:04 Problem in the scan-axis (firmware error).
System error 73:04 Server error.
System error 79:04 Miscellaneous firmware error.
System error 81:01 Paper-axis shutdown.
System error 81:11 Paper-axis shutdown (during the paper advance test).
System error 85:10 Paper-axis shutdown (during the paper advance test).
System error 86:01 Carriage-Axis shutdown.
Carriage-axis shutdown (during the carriage movement
System error 86:11
test).
System error 86:13 Carriage-Axis shutdown (firmware error).
System error 87:13 Unable to read the carriage encoder sensor.
System error 93:10 Ink System startup failed.
